Merge tag 'asoc-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.7

Lots and lots of driver specific cleanups and enhancements but the only
substantial framework feature this time round is the compressed API
binding:

- Addition of ASoC bindings for the compressed API, used by the mid-x86
  drivers.
- Lots of cleanups and API refreshes for CODEC drivers and DaVinci.
- Conversion of OMAP to dmaengine.
- New machine driver for Wolfson Microelectronics Bells.
- New CODEC driver for Wolfson Microelectronics WM0010.

10 files changed, 291 insertions, 1 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 34f5110..dff1f48 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -210,3 +210,15 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../d3cold_allowed
+Date:		July 2012
+Contact:	Huang Ying <ying.huang@intel.com>
+Description:
+		d3cold_allowed is bit to control whether the corresponding PCI
+		device can be put into D3Cold state.  If it is cleared, the
+		device will never be put into D3Cold state.  If it is set, the
+		device may be put into D3Cold state if other requirements are
+		satisfied too.  Reading this attribute will show the current
+		value of d3cold_allowed bit.  Writing this attribute will set
+		the value of d3cold_allowed bit.
diff --git a/Documentation/devicetree/bindings/mfd/twl4030-audio.txt b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt
new file mode 100644
index 0000000..414d2ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt
@@ -0,0 +1,46 @@
+Texas Instruments TWL family (twl4030) audio module
+
+The audio module inside the TWL family consist of an audio codec and a vibra
+driver.
+
+Required properties:
+- compatible : must be "ti,twl4030-audio"
+
+Optional properties, nodes:
+
+Audio functionality:
+- codec { }: Need to be present if the audio functionality is used. Within this
+	     section the following options can be used:
+- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts
+		    from the start of the recorded sample (in ms)
+-ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise
+-ti,hs_extmute: Use external mute for HS pop reduction
+-ti,hs_extmute_gpio: Use external GPIO to control the external mute
+-ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the
+		      valid values.
+
+Vibra functionality
+- ti,enable-vibra: Need to be set to <1> if the vibra functionality is used. if
+		   missing or it is 0, the vibra functionality is disabled.
+
+Example:
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+
+			ti,enable-vibra = <1>;
+
+			codec {
+				ti,ramp_delay_value = <3>;
+			};
+
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt
new file mode 100644
index 0000000..6b222f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs4270.txt
@@ -0,0 +1,21 @@
+CS4270 audio CODEC
+
+The driver for this device currently only supports I2C.
+
+Required properties:
+
+  - compatible : "cirrus,cs4270"
+
+  - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+  - reset-gpio : a GPIO spec for the reset pin. If specified, it will be
+		 deasserted before communication to the codec starts.
+
+Example:
+
+codec: cs4270@48 {
+	compatible = "cirrus,cs4270";
+	reg = <0x48>;
+};
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
new file mode 100644
index 0000000..374e145
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -0,0 +1,45 @@
+Texas Instruments McASP controller
+
+Required properties:
+- compatible :
+	"ti,dm646x-mcasp-audio"	: for DM646x platforms
+	"ti,da830-mcasp-audio"	: for both DA830 & DA850 platforms
+	"ti,omap2-mcasp-audio"	: for OMAP2 platforms (TI81xx, AM33xx)
+
+- reg : Should contain McASP registers offset and length
+- interrupts : Interrupt number for McASP
+- op-mode : I2S/DIT ops mode.
+- tdm-slots : Slots for TDM operation.
+- num-serializer : Serializers used by McASP.
+- serial-dir : A list of serializer pin mode. The list number should be equal
+		to "num-serializer" parameter. Each entry is a number indication
+		serializer pin direction. (0 - INACTIVE, 1 - TX, 2 - RX)
+
+
+Optional properties:
+
+- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0
+- tx-num-evt : FIFO levels.
+- rx-num-evt : FIFO levels.
+- sram-size-playback : size of sram to be allocated during playback
+- sram-size-capture  : size of sram to be allocated during capture
+
+Example:
+
+mcasp0: mcasp0@1d00000 {
+	compatible = "ti,da830-mcasp-audio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x100000 0x3000>;
+	interrupts = <82 83>;
+	op-mode = <0>;		/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	num-serializer = <16>;
+	serial-dir = <
+			0 0 0 0	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 0 0
+			0 0 0 1
+			2 0 0 0 >;
+	tx-num-evt = <1>;
+	rx-num-evt = <1>;
+};
diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
new file mode 100644
index 0000000..65dec87
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
@@ -0,0 +1,91 @@
+* Texas Instruments OMAP4+ and twl6040 based audio setups
+
+Required properties:
+- compatible: "ti,abe-twl6040"
+- ti,model: Name of the sound card ( for example "SDP4430")
+- ti,mclk-freq: MCLK frequency for HPPLL operation
+- ti,mcpdm: phandle for the McPDM node
+- ti,twl6040: phandle for the twl6040 core node
+- ti,audio-routing: List of connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source.
+
+Optional properties:
+- ti,dmic: phandle for the OMAP dmic node if the machine have it connected
+- ti,jack_detection: Need to be set to <1> if the board capable to detect jack
+  insertion, removal.
+
+Available audio endpoints for the audio-routing table:
+
+Board connectors:
+ * Headset Stereophone
+ * Earphone Spk
+ * Ext Spk
+ * Line Out
+ * Vibrator
+ * Headset Mic
+ * Main Handset Mic
+ * Sub Handset Mic
+ * Line In
+ * Digital Mic
+
+twl6040 pins:
+ * HSOL
+ * HSOR
+ * EP
+ * HFL
+ * HFR
+ * AUXL
+ * AUXR
+ * VIBRAL
+ * VIBRAR
+ * HSMIC
+ * MAINMIC
+ * SUBMIC
+ * AFML
+ * AFMR
+
+ * Headset Mic Bias
+ * Main Mic Bias
+ * Digital Mic1 Bias
+ * Digital Mic2 Bias
+
+Digital mic pins:
+ * DMic
+
+Example:
+
+sound {
+	compatible = "ti,abe-twl6040";
+	ti,model = "SDP4430";
+
+	ti,jack-detection = <1>;
+	ti,mclk-freq = <38400000>;
+
+	ti,mcpdm = <&mcpdm>;
+	ti,dmic = <&dmic>;
+
+	ti,twl6040 = <&twl6040>;
+
+	/* Audio routing */
+	ti,audio-routing =
+		"Headset Stereophone", "HSOL",
+		"Headset Stereophone", "HSOR",
+		"Earphone Spk", "EP",
+		"Ext Spk", "HFL",
+		"Ext Spk", "HFR",
+		"Line Out", "AUXL",
+		"Line Out", "AUXR",
+		"Vibrator", "VIBRAL",
+		"Vibrator", "VIBRAR",
+		"HSMIC", "Headset Mic",
+		"Headset Mic", "Headset Mic Bias",
+		"MAINMIC", "Main Handset Mic",
+		"Main Handset Mic", "Main Mic Bias",
+		"SUBMIC", "Sub Handset Mic",
+		"Sub Handset Mic", "Main Mic Bias",
+		"AFML", "Line In",
+		"AFMR", "Line In",
+		"DMic", "Digital Mic",
+		"Digital Mic", "Digital Mic1 Bias";
+};
diff --git a/Documentation/devicetree/bindings/sound/omap-mcbsp.txt b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt
new file mode 100644
index 0000000..17cce44
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt
@@ -0,0 +1,37 @@
+* Texas Instruments OMAP2+ McBSP module
+
+Required properties:
+- compatible: "ti,omap2420-mcbsp" for McBSP on OMAP2420
+	      "ti,omap2430-mcbsp" for McBSP on OMAP2430
+	      "ti,omap3-mcbsp" for McBSP on OMAP3
+	      "ti,omap4-mcbsp" for McBSP on OMAP4 and newer SoC
+- reg: Register location and size, for OMAP4+ as an array:
+       <MPU access base address, size>,
+       <L3 interconnect address, size>;
+- reg-names: Array of strings associated with the address space
+- interrupts: Interrupt numbers for the McBSP port, as an array in case the
+	      McBSP IP have more interrupt lines:
+	<OCP compliant irq>,
+	<TX irq>,
+	<RX irq>;
+- interrupt-names: Array of strings associated with the interrupt numbers
+- interrupt-parent: The parent interrupt controller
+- ti,buffer-size: Size of the FIFO on the port (OMAP2430 and newer SoC)
+- ti,hwmods: Name of the hwmod associated to the McBSP port
+
+Example:
+
+mcbsp2: mcbsp@49022000 {
+	compatible = "ti,omap3-mcbsp";
+	reg = <0x49022000 0xff>,
+	      <0x49028000 0xff>;
+	reg-names = "mpu", "sidetone";
+	interrupts = <0 17 0x4>, /* OCP compliant interrupt */
+		     <0 62 0x4>, /* TX interrupt */
+		     <0 63 0x4>, /* RX interrupt */
+		     <0 4 0x4>;  /* Sidetone */
+	interrupt-names = "common", "tx", "rx", "sidetone";
+	interrupt-parent = <&intc>;
+	ti,buffer-size = <1280>;
+	ti,hwmods = "mcbsp2";
+};
diff --git a/Documentation/devicetree/bindings/sound/omap-twl4030.txt b/Documentation/devicetree/bindings/sound/omap-twl4030.txt
new file mode 100644
index 0000000..6fae51c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/omap-twl4030.txt
@@ -0,0 +1,17 @@
+* Texas Instruments SoC with twl4030 based audio setups
+
+Required properties:
+- compatible: "ti,omap-twl4030"
+- ti,model: Name of the sound card (for example "omap3beagle")
+- ti,mcbsp: phandle for the McBSP node
+- ti,codec: phandle for the twl4030 audio node
+
+Example:
+
+sound {
+	compatible = "ti,omap-twl4030";
+	ti,model = "omap3beagle";
+
+	ti,mcbsp = <&mcbsp2>;
+	ti,codec = <&twl_audio>;
+};
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
new file mode 100644
index 0000000..e7b98f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
@@ -0,0 +1,20 @@
+Texas Instruments - tlv320aic3x Codec module
+
+The tlv320aic3x serial control bus communicates through I2C protocols
+
+Required properties:
+- compatible - "string" -  "ti,tlv320aic3x"
+- reg - <int> -  I2C slave address
+
+
+Optional properties:
+
+- gpio-reset - gpio pin number used for codec reset
+- ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
+
+Example:
+
+tlv320aic3x: tlv320aic3x@1b {
+	compatible = "ti,tlv320aic3x";
+	reg = <0x1b>;
+};
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index afaff31..f4d8c71 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -579,7 +579,7 @@ Why:	KVM tracepoints provide mostly equivalent information in a much more
 ----------------------------
 
 What:	at91-mci driver ("CONFIG_MMC_AT91")
-When:	3.7
+When:	3.8
 Why:	There are two mci drivers: at91-mci and atmel-mci. The PDC support
 	was added to atmel-mci as a first step to support more chips.
 	Then at91-mci was kept only for old IP versions (on at91rm9200 and
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 615142d..157416e7 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -21,6 +21,7 @@ Supported adapters:
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
+  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller