Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (69 commits)
  [POWERPC] Add SPE registers to core dumps
  [POWERPC] Use regset code for compat PTRACE_*REGS* calls
  [POWERPC] Use generic compat_sys_ptrace
  [POWERPC] Use generic compat_ptrace_request
  [POWERPC] Use generic ptrace peekdata/pokedata
  [POWERPC] Use regset code for PTRACE_*REGS* requests
  [POWERPC] Switch to generic compat_binfmt_elf code
  [POWERPC] Switch to using user_regset-based core dumps
  [POWERPC] Add user_regset compat support
  [POWERPC] Add user_regset_view definitions
  [POWERPC] Use user_regset accessors for GPRs
  [POWERPC] ptrace accessors for special regs MSR and TRAP
  [POWERPC] Use user_regset accessors for SPE regs
  [POWERPC] Use user_regset accessors for altivec regs
  [POWERPC] Use user_regset accessors for FP regs
  [POWERPC] mpc52xx: fix compile error introduce when rebasing patch
  [POWERPC] 4xx: PCIe indirect DCR spinlock fix.
  [POWERPC] Add missing native dcr dcr_ind_lock spinlock
  [POWERPC] 4xx: Fix offset value on Warp board
  [POWERPC] 4xx: Add 440EPx Sequoia ehci dts entry
  ...

1 files changed, 42 insertions, 0 deletions

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index b5e46ef..7b4e8a7 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -57,6 +57,7 @@ Table of Contents
       n) 4xx/Axon EMAC ethernet nodes
       o) Xilinx IP cores
       p) Freescale Synchronous Serial Interface
+	  q) USB EHCI controllers
 
   VII - Specifying interrupt information for devices
     1) interrupts property
@@ -2577,6 +2578,20 @@ platforms are moved over to use the flattened-device-tree model.
       Requred properties:
        - current-speed : Baud rate of uartlite
 
+      v) Xilinx hwicap
+
+		Xilinx hwicap devices provide access to the configuration logic
+		of the FPGA through the Internal Configuration Access Port
+		(ICAP).  The ICAP enables partial reconfiguration of the FPGA,
+		readback of the configuration information, and some control over
+		'warm boots' of the FPGA fabric.
+
+		Required properties:
+		- xlnx,family : The family of the FPGA, necessary since the
+                      capabilities of the underlying ICAP hardware
+                      differ between different families.  May be
+                      'virtex2p', 'virtex4', or 'virtex5'.
+
     p) Freescale Synchronous Serial Interface
 
        The SSI is a serial device that communicates with audio codecs.  It can
@@ -2775,6 +2790,33 @@ platforms are moved over to use the flattened-device-tree model.
 		interrupt-parent = < &ipic >;
         };
 
+    q) USB EHCI controllers
+
+    Required properties:
+      - compatible : should be "usb-ehci".
+      - reg : should contain at least address and length of the standard EHCI
+        register set for the device. Optional platform-dependent registers
+        (debug-port or other) can be also specified here, but only after
+        definition of standard EHCI registers.
+      - interrupts : one EHCI interrupt should be described here.
+    If device registers are implemented in big endian mode, the device
+    node should have "big-endian-regs" property.
+    If controller implementation operates with big endian descriptors,
+    "big-endian-desc" property should be specified.
+    If both big endian registers and descriptors are used by the controller
+    implementation, "big-endian" property can be specified instead of having
+    both "big-endian-regs" and "big-endian-desc".
+
+     Example (Sequoia 440EPx):
+	    ehci@e0000300 {
+		   compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+		   interrupt-parent = <&UIC0>;
+		   interrupts = <1a 4>;
+		   reg = <0 e0000300 90 0 e0000390 70>;
+		   big-endian;
+	   };
+
+
    More devices will be defined as this spec matures.
 
 VII - Specifying interrupt information for devices