summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorVinod Koul <vinod.koul@intel.com>2013-11-16 11:54:17 +0530
committerVinod Koul <vinod.koul@intel.com>2013-11-16 12:02:36 +0530
commitdf12a3178d340319b1955be6b973a4eb84aff754 (patch)
tree2b9c68f8a6c299d1e5a4026c60117b5c00d46008 /Documentation
parent2f986ec6fa57a5dcf77f19f5f0d44b1f680a100f (diff)
parent82a1402eaee5dab1f3ab2d5aa4c316451374c5af (diff)
downloadop-kernel-dev-df12a3178d340319b1955be6b973a4eb84aff754.zip
op-kernel-dev-df12a3178d340319b1955be6b973a4eb84aff754.tar.gz
Merge commit 'dmaengine-3.13-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine
Pull dmaengine changes from Dan 1/ Bartlomiej and Dan finalized a rework of the dma address unmap implementation. 2/ In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus for their review. 3/ Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. 4/ Some minor fixes / cleanups to mv_xor and ioatdma. Conflicts: drivers/dma/dmatest.c Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/dmatest.txt72
1 files changed, 41 insertions, 31 deletions
diff --git a/Documentation/dmatest.txt b/Documentation/dmatest.txt
index a2b5663..dd77a81 100644
--- a/Documentation/dmatest.txt
+++ b/Documentation/dmatest.txt
@@ -15,39 +15,48 @@ be built as module or inside kernel. Let's consider those cases.
Part 2 - When dmatest is built as a module...
-After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest
-folder with nodes will be created. There are two important files located. First
-is the 'run' node that controls run and stop phases of the test, and the second
-one, 'results', is used to get the test case results.
-
-Note that in this case test will not run on load automatically.
-
Example of usage:
+ % modprobe dmatest channel=dma0chan0 timeout=2000 iterations=1 run=1
+
+...or:
+ % modprobe dmatest
% echo dma0chan0 > /sys/module/dmatest/parameters/channel
% echo 2000 > /sys/module/dmatest/parameters/timeout
% echo 1 > /sys/module/dmatest/parameters/iterations
- % echo 1 > /sys/kernel/debug/dmatest/run
+ % echo 1 > /sys/module/dmatest/parameters/run
+
+...or on the kernel command line:
+
+ dmatest.channel=dma0chan0 dmatest.timeout=2000 dmatest.iterations=1 dmatest.run=1
Hint: available channel list could be extracted by running the following
command:
% ls -1 /sys/class/dma/
-After a while you will start to get messages about current status or error like
-in the original code.
+Once started a message like "dmatest: Started 1 threads using dma0chan0" is
+emitted. After that only test failure messages are reported until the test
+stops.
Note that running a new test will not stop any in progress test.
-The following command should return actual state of the test.
- % cat /sys/kernel/debug/dmatest/run
-
-To wait for test done the user may perform a busy loop that checks the state.
-
- % while [ $(cat /sys/kernel/debug/dmatest/run) = "Y" ]
- > do
- > echo -n "."
- > sleep 1
- > done
- > echo
+The following command returns the state of the test.
+ % cat /sys/module/dmatest/parameters/run
+
+To wait for test completion userpace can poll 'run' until it is false, or use
+the wait parameter. Specifying 'wait=1' when loading the module causes module
+initialization to pause until a test run has completed, while reading
+/sys/module/dmatest/parameters/wait waits for any running test to complete
+before returning. For example, the following scripts wait for 42 tests
+to complete before exiting. Note that if 'iterations' is set to 'infinite' then
+waiting is disabled.
+
+Example:
+ % modprobe dmatest run=1 iterations=42 wait=1
+ % modprobe -r dmatest
+...or:
+ % modprobe dmatest run=1 iterations=42
+ % cat /sys/module/dmatest/parameters/wait
+ % modprobe -r dmatest
Part 3 - When built-in in the kernel...
@@ -62,21 +71,22 @@ case. You always could check them at run-time by running
Part 4 - Gathering the test results
-The module provides a storage for the test results in the memory. The gathered
-data could be used after test is done.
+Test results are printed to the kernel log buffer with the format:
-The special file 'results' in the debugfs represents gathered data of the in
-progress test. The messages collected are printed to the kernel log as well.
+"dmatest: result <channel>: <test id>: '<error msg>' with src_off=<val> dst_off=<val> len=<val> (<err code>)"
Example of output:
- % cat /sys/kernel/debug/dmatest/results
- dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
+ % dmesg | tail -n 1
+ dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
The message format is unified across the different types of errors. A number in
the parens represents additional information, e.g. error code, error counter,
-or status.
+or status. A test thread also emits a summary line at completion listing the
+number of tests executed, number that failed, and a result code.
-Comparison between buffers is stored to the dedicated structure.
+Example:
+ % dmesg | tail -n 1
+ dmatest: dma0chan0-copy0: summary 1 test, 0 failures 1000 iops 100000 KB/s (0)
-Note that the verify result is now accessible only via file 'results' in the
-debugfs.
+The details of a data miscompare error are also emitted, but do not follow the
+above format.
OpenPOWER on IntegriCloud