summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorTim Kryger <tim.kryger@linaro.org>2013-11-14 13:02:13 -0800
committerWolfram Sang <wsa@the-dreams.de>2013-11-15 23:47:09 +0100
commit93d17247118ca533edd489f8e09bde417f4720ce (patch)
tree08c4df4b87451dd0f2ebbdbe54b2770981400596 /Documentation
parentde546c8a964accfbfc9c584e5fc1e4c3f5336a18 (diff)
downloadop-kernel-dev-93d17247118ca533edd489f8e09bde417f4720ce.zip
op-kernel-dev-93d17247118ca533edd489f8e09bde417f4720ce.tar.gz
i2c: bcm-kona: Introduce Broadcom I2C Driver
Introduce support for Broadcom Serial Controller (BSC) I2C bus found in the Kona family of Mobile SoCs. FIFO hardware is utilized but only standard mode (100kHz), fast mode (400kHz), fast mode plus (1MHz), and I2C high-speed (3.4 MHz) bus speeds are supported. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> [wsa: fixed Kconfig sorting, squashed broken out patches into one] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt35
1 files changed, 35 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt b/Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt
new file mode 100644
index 0000000..1b87b74
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt
@@ -0,0 +1,35 @@
+Broadcom Kona Family I2C
+=========================
+
+This I2C controller is used in the following Broadcom SoCs:
+
+ BCM11130
+ BCM11140
+ BCM11351
+ BCM28145
+ BCM28155
+
+Required Properties
+-------------------
+- compatible: "brcm,bcm11351-i2c", "brcm,kona-i2c"
+- reg: Physical base address and length of controller registers
+- interrupts: The interrupt number used by the controller
+- clocks: clock specifier for the kona i2c external clock
+- clock-frequency: The I2C bus frequency in Hz
+- #address-cells: Should be <1>
+- #size-cells: Should be <0>
+
+Refer to clocks/clock-bindings.txt for generic clock consumer
+properties.
+
+Example:
+
+i2c@3e016000 {
+ compatible = "brcm,bcm11351-i2c","brcm,kona-i2c";
+ reg = <0x3e016000 0x80>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bsc1_clk>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
OpenPOWER on IntegriCloud