summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorKishon Vijay Abraham I <kishon@ti.com>2013-03-07 18:51:46 +0530
committerFelipe Balbi <balbi@ti.com>2013-03-18 11:18:23 +0200
commiteee44da0453cfe9125f4297e4244fe1d6fb1c653 (patch)
tree21fc6bec83742c5756bf246e5d70baf76775a79d /Documentation
parentc3ec830d8925d904f8826d52227d7dfb5dee922c (diff)
downloadop-kernel-dev-eee44da0453cfe9125f4297e4244fe1d6fb1c653.zip
op-kernel-dev-eee44da0453cfe9125f4297e4244fe1d6fb1c653.tar.gz
usb: musb: omap2430: replace *_* with *-* in property names
No functional change. Replace *_* with *-* in property names of otg to follow the general convention. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/usb/omap-usb.txt12
1 files changed, 6 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 1b9f55f..662f0f1 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -8,10 +8,10 @@ OMAP MUSB GLUE
and disconnect.
- multipoint : Should be "1" indicating the musb controller supports
multipoint. This is a MUSB configuration-specific setting.
- - num_eps : Specifies the number of endpoints. This is also a
+ - num-eps : Specifies the number of endpoints. This is also a
MUSB configuration-specific setting. Should be set to "16"
- - ram_bits : Specifies the ram address size. Should be set to "12"
- - interface_type : This is a board specific setting to describe the type of
+ - ram-bits : Specifies the ram address size. Should be set to "12"
+ - interface-type : This is a board specific setting to describe the type of
interface between the controller and the phy. It should be "0" or "1"
specifying ULPI and UTMI respectively.
- mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
@@ -29,14 +29,14 @@ usb_otg_hs: usb_otg_hs@4a0ab000 {
ti,hwmods = "usb_otg_hs";
ti,has-mailbox;
multipoint = <1>;
- num_eps = <16>;
- ram_bits = <12>;
+ num-eps = <16>;
+ ram-bits = <12>;
ctrl-module = <&omap_control_usb>;
};
Board specific device node entry
&usb_otg_hs {
- interface_type = <1>;
+ interface-type = <1>;
mode = <3>;
power = <50>;
};
OpenPOWER on IntegriCloud