Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

10 files changed, 235 insertions, 27 deletions

diff --git a/Documentation/ABI/obsolete/proc-pid-oom_adj b/Documentation/ABI/obsolete/proc-pid-oom_adj
new file mode 100644
index 0000000..cf63f26
--- /dev/null
+++ b/Documentation/ABI/obsolete/proc-pid-oom_adj
@@ -0,0 +1,22 @@
+What:	/proc/<pid>/oom_adj
+When:	August 2012
+Why:	/proc/<pid>/oom_adj allows userspace to influence the oom killer's
+	badness heuristic used to determine which task to kill when the kernel
+	is out of memory.
+
+	The badness heuristic has since been rewritten since the introduction of
+	this tunable such that its meaning is deprecated.  The value was
+	implemented as a bitshift on a score generated by the badness()
+	function that did not have any precise units of measure.  With the
+	rewrite, the score is given as a proportion of available memory to the
+	task allocating pages, so using a bitshift which grows the score
+	exponentially is, thus, impossible to tune with fine granularity.
+
+	A much more powerful interface, /proc/<pid>/oom_score_adj, was
+	introduced with the oom killer rewrite that allows users to increase or
+	decrease the badness() score linearly.  This interface will replace
+	/proc/<pid>/oom_adj.
+
+	A warning will be emitted to the kernel log if an application uses this
+	deprecated interface.  After it is printed once, future warnings will be
+	suppressed until the kernel is rebooted.
diff --git a/Documentation/block/switching-sched.txt b/Documentation/block/switching-sched.txt
index d5af3f6..71cfbdc 100644
--- a/Documentation/block/switching-sched.txt
+++ b/Documentation/block/switching-sched.txt
@@ -16,7 +16,7 @@ you can do so by typing:
 As of the Linux 2.6.10 kernel, it is now possible to change the
 IO scheduler for a given block device on the fly (thus making it possible,
 for instance, to set the CFQ scheduler for the system default, but
-set a specific device to use the anticipatory or noop schedulers - which
+set a specific device to use the deadline or noop schedulers - which
 can improve that device's throughput).
 
 To set a specific scheduler, simply do this:
@@ -31,7 +31,7 @@ a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
 will be displayed, with the currently selected scheduler in brackets:
 
 # cat /sys/block/hda/queue/scheduler
-noop anticipatory deadline [cfq]
-# echo anticipatory > /sys/block/hda/queue/scheduler
+noop deadline [cfq]
+# echo deadline > /sys/block/hda/queue/scheduler
 # cat /sys/block/hda/queue/scheduler
-noop [anticipatory] deadline cfq
+noop [deadline] cfq
diff --git a/Documentation/filesystems/xfs-delayed-logging-design.txt b/Documentation/filesystems/xfs-delayed-logging-design.txt
index 96d0df2..7445bf3 100644
--- a/Documentation/filesystems/xfs-delayed-logging-design.txt
+++ b/Documentation/filesystems/xfs-delayed-logging-design.txt
@@ -794,17 +794,6 @@ designed.
 
 Roadmap:
 
-2.6.37 Remove experimental tag from mount option
-	=> should be roughly 6 months after initial merge
-	=> enough time to:
-		=> gain confidence and fix problems reported by early
-		   adopters (a.k.a. guinea pigs)
-		=> address worst performance regressions and undesired
-		   behaviours
-		=> start tuning/optimising code for parallelism
-		=> start tuning/optimising algorithms consuming
-		   excessive CPU time
-
 2.6.39 Switch default mount option to use delayed logging
 	=> should be roughly 12 months after initial merge
 	=> enough time to shake out remaining problems before next round of
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index ed45e98..92e83e5 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -706,7 +706,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			arch/x86/kernel/cpu/cpufreq/elanfreq.c.
 
 	elevator=	[IOSCHED]
-			Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
+			Format: {"cfq" | "deadline" | "noop"}
 			See Documentation/block/as-iosched.txt and
 			Documentation/block/deadline-iosched.txt for details.
 
diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt
index 8fd5ca2..58b266b 100644
--- a/Documentation/leds-class.txt
+++ b/Documentation/leds-class.txt
@@ -60,15 +60,18 @@ Hardware accelerated blink of LEDs
 
 Some LEDs can be programmed to blink without any CPU interaction. To
 support this feature, a LED driver can optionally implement the
-blink_set() function (see <linux/leds.h>). If implemented, triggers can
-attempt to use it before falling back to software timers. The blink_set()
-function should return 0 if the blink setting is supported, or -EINVAL
-otherwise, which means that LED blinking will be handled by software.
-
-The blink_set() function should choose a user friendly blinking
-value if it is called with *delay_on==0 && *delay_off==0 parameters. In
-this case the driver should give back the chosen value through delay_on
-and delay_off parameters to the leds subsystem.
+blink_set() function (see <linux/leds.h>). To set an LED to blinking,
+however, it is better to use use the API function led_blink_set(),
+as it will check and implement software fallback if necessary.
+
+To turn off blinking again, use the API function led_brightness_set()
+as that will not just set the LED brightness but also stop any software
+timers that may have been required for blinking.
+
+The blink_set() function should choose a user friendly blinking value
+if it is called with *delay_on==0 && *delay_off==0 parameters. In this
+case the driver should give back the chosen value through delay_on and
+delay_off parameters to the leds subsystem.
 
 Setting the brightness to zero with brightness_set() callback function
 should completely turn off the LED and cancel the previously programmed
diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt
new file mode 100644
index 0000000..c4d8d15
--- /dev/null
+++ b/Documentation/leds/leds-lp5521.txt
@@ -0,0 +1,88 @@
+Kernel driver for lp5521
+========================
+
+* National Semiconductor LP5521 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5521.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+
+LP5521 can drive up to 3 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5521:channelx, where x is 0 .. 2
+
+All three channels can be also controlled using the engine micro programs.
+More details of the instructions can be found from the public data sheet.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : store program (visible only in engine load mode)
+
+Example (start to blink the channel 2 led):
+cd   /sys/class/leds/lp5521:channel2/device
+echo "load" > engine3_mode
+echo "037f4d0003ff6000" > engine3_load
+echo "run" > engine3_mode
+
+stop the engine:
+echo "disabled" > engine3_mode
+
+sysfs contains a selftest entry.
+The test communicates with the chip and checks that
+the clock mode is automatically set to the requested one.
+
+Each channel has its own led current settings.
+/sys/class/leds/lp5521:channel0/led_current - RW
+/sys/class/leds/lp5521:channel0/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+example platform data:
+
+Note: chan_nr can have values between 0 and 2.
+
+static struct lp5521_led_config lp5521_led_config[] = {
+        {
+                .chan_nr        = 0,
+                .led_current    = 50,
+		.max_current    = 130,
+        }, {
+                .chan_nr        = 1,
+                .led_current    = 0,
+		.max_current    = 130,
+        }, {
+                .chan_nr        = 2,
+                .led_current    = 0,
+		.max_current    = 130,
+        }
+};
+
+static int lp5521_setup(void)
+{
+	/* setup HW resources */
+}
+
+static void lp5521_release(void)
+{
+	/* Release HW resources */
+}
+
+static void lp5521_enable(bool state)
+{
+	/* Control of chip enable signal */
+}
+
+static struct lp5521_platform_data lp5521_platform_data = {
+        .led_config     = lp5521_led_config,
+        .num_channels   = ARRAY_SIZE(lp5521_led_config),
+        .clock_mode     = LP5521_CLOCK_EXT,
+        .setup_resources   = lp5521_setup,
+        .release_resources = lp5521_release,
+        .enable            = lp5521_enable,
+};
+
+If the current is set to 0 in the platform data, that channel is
+disabled and it is not visible in the sysfs.
diff --git a/Documentation/leds/leds-lp5523.txt b/Documentation/leds/leds-lp5523.txt
new file mode 100644
index 0000000..fad2feb
--- /dev/null
+++ b/Documentation/leds/leds-lp5523.txt
@@ -0,0 +1,83 @@
+Kernel driver for lp5523
+========================
+
+* National Semiconductor LP5523 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5523.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+LP5523 can drive up to 9 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5523:channelx where x is 0...8
+
+The chip provides 3 engines. Each engine can control channels without
+interaction from the main CPU. Details of the micro engine code can be found
+from the public data sheet. Leds can be muxed to different channels.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : microcode load (visible only in load mode)
+enginex_leds : led mux control (visible only in load mode)
+
+cd /sys/class/leds/lp5523:channel2/device
+echo "load" > engine3_mode
+echo "9d80400004ff05ff437f0000" > engine3_load
+echo "111111111" > engine3_leds
+echo "run" > engine3_mode
+
+sysfs contains a selftest entry. It measures each channel
+voltage level and checks if it looks reasonable. If the level is too high,
+the led is missing; if the level is too low, there is a short circuit.
+
+Selftest uses always the current from the platform data.
+
+Each channel contains led current settings.
+/sys/class/leds/lp5523:channel2/led_current - RW
+/sys/class/leds/lp5523:channel2/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+Example platform data:
+
+Note - chan_nr can have values between 0 and 8.
+
+static struct lp5523_led_config lp5523_led_config[] = {
+        {
+                .chan_nr        = 0,
+                .led_current    = 50,
+		.max_current    = 130,
+        },
+...
+        }, {
+                .chan_nr        = 8,
+                .led_current    = 50,
+		.max_current    = 130,
+        }
+};
+
+static int lp5523_setup(void)
+{
+	/* Setup HW resources */
+}
+
+static void lp5523_release(void)
+{
+	/* Release HW resources */
+}
+
+static void lp5523_enable(bool state)
+{
+	/* Control chip enable signal */
+}
+
+static struct lp5523_platform_data lp5523_platform_data = {
+        .led_config     = lp5523_led_config,
+        .num_channels   = ARRAY_SIZE(lp5523_led_config),
+        .clock_mode     = LP5523_CLOCK_EXT,
+        .setup_resources   = lp5523_setup,
+        .release_resources = lp5523_release,
+        .enable            = lp5523_enable,
+};
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index c7165f4..fe951059 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -20,6 +20,15 @@ ip_no_pmtu_disc - BOOLEAN
 min_pmtu - INTEGER
 	default 562 - minimum discovered Path MTU
 
+route/max_size - INTEGER
+	Maximum number of routes allowed in the kernel.  Increase
+	this when using large numbers of interfaces and/or routes.
+
+neigh/default/gc_thresh3 - INTEGER
+	Maximum number of neighbor entries allowed.  Increase this
+	when using large numbers of interfaces and when communicating
+	with large numbers of directly-connected peers.
+
 mtu_expires - INTEGER
 	Time, in seconds, that cached PMTU information is kept.
 
diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt
index 221f38b..19f8278 100644
--- a/Documentation/rbtree.txt
+++ b/Documentation/rbtree.txt
@@ -21,8 +21,8 @@ three rotations, respectively, to balance the tree), with slightly slower
 To quote Linux Weekly News:
 
     There are a number of red-black trees in use in the kernel.
-    The anticipatory, deadline, and CFQ I/O schedulers all employ
-    rbtrees to track requests; the packet CD/DVD driver does the same.
+    The deadline and CFQ I/O schedulers employ rbtrees to
+    track requests; the packet CD/DVD driver does the same.
     The high-resolution timer code uses an rbtree to organize outstanding
     timer requests.  The ext3 filesystem tracks directory entries in a
     red-black tree.  Virtual memory areas (VMAs) are tracked with red-black
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 3894eaa..209e158 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -28,6 +28,7 @@ show up in /proc/sys/kernel:
 - core_uses_pid
 - ctrl-alt-del
 - dentry-state
+- dmesg_restrict
 - domainname
 - hostname
 - hotplug
@@ -213,6 +214,19 @@ to decide what to do with it.
 
 ==============================================================
 
+dmesg_restrict:
+
+This toggle indicates whether unprivileged users are prevented from using
+dmesg(8) to view messages from the kernel's log buffer.  When
+dmesg_restrict is set to (0) there are no restrictions.  When
+dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use
+dmesg(8).
+
+The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default
+value of dmesg_restrict.
+
+==============================================================
+
 domainname & hostname:
 
 These files can be used to set the NIS/YP domainname and the