Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (112 commits)
  ACPI: fix build warning
  Revert "cpuidle: build fix for non-x86"
  ACPI: update intrd DSDT override console messages
  ACPI: update DSDT override documentation
  ACPI: Add "acpi_no_initrd_override" kernel parameter
  ACPI: its a directory not a folder....
  ACPI: misc cleanups
  ACPI: add missing prink prefix strings
  ACPI: cleanup acpi.h
  ACPICA: fix CONFIG_ACPI_DEBUG_FUNC_TRACE build
  ACPI: video: Ignore ACPI video devices that aren't present in hardware
  ACPI: video: reset brightness on resume
  ACPI: video: call ACPI notifier chain for ACPI video notifications
  ACPI: create notifier chain to get hotkey events to graphics driver
  ACPI: video: delete unused display switch on hotkey event code
  ACPI: video: create "brightness_switch_enabled" modparam
  cpuidle: Add a poll_idle method
  ACPI: cpuidle: Support C1 idle time accounting
  ACPI: enable MWAIT for C1 idle
  ACPI: idle: Fix acpi_safe_halt usages and interrupt enabling/disabling
  ...

9 files changed, 552 insertions, 10 deletions

diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index d273b55..6e9c405 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -14,6 +14,7 @@ Following translations are available on the WWW:
 	- this file.
 ABI/
 	- info on kernel <-> userspace ABI and relative interface stability.
+
 BUG-HUNTING
 	- brute force method of doing binary search of patches to find bug.
 Changes
@@ -66,6 +67,8 @@ VGA-softcursor.txt
 	- how to change your VGA cursor from a blinking underscore.
 accounting/
 	- documentation on accounting and taskstats.
+acpi/
+	- info on ACPI-specific hooks in the kernel.
 aoe/
 	- description of AoE (ATA over Ethernet) along with config examples.
 applying-patches.txt
diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi
new file mode 100644
index 0000000..9470ed9
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-acpi
@@ -0,0 +1,99 @@
+What:		/sys/firmware/acpi/interrupts/
+Date:		February 2008
+Contact:	Len Brown <lenb@kernel.org>
+Description:
+		All ACPI interrupts are handled via a single IRQ,
+		the System Control Interrupt (SCI), which appears
+		as "acpi" in /proc/interrupts.
+
+		However, one of the main functions of ACPI is to make
+		the platform understand random hardware without
+		special driver support.  So while the SCI handles a few
+		well known (fixed feature) interrupts sources, such
+		as the power button, it can also handle a variable
+		number of a "General Purpose Events" (GPE).
+
+		A GPE vectors to a specified handler in AML, which
+		can do a anything the BIOS writer wants from
+		OS context.  GPE 0x12, for example, would vector
+		to a level or edge handler called _L12 or _E12.
+		The handler may do its business and return.
+		Or the handler may send send a Notify event
+		to a Linux device driver registered on an ACPI device,
+		such as a battery, or a processor.
+
+		To figure out where all the SCI's are coming from,
+		/sys/firmware/acpi/interrupts contains a file listing
+		every possible source, and the count of how many
+		times it has triggered.
+
+		$ cd /sys/firmware/acpi/interrupts
+		$ grep . *
+		error:0
+		ff_gbl_lock:0
+		ff_pmtimer:0
+		ff_pwr_btn:0
+		ff_rt_clk:0
+		ff_slp_btn:0
+		gpe00:0
+		gpe01:0
+		gpe02:0
+		gpe03:0
+		gpe04:0
+		gpe05:0
+		gpe06:0
+		gpe07:0
+		gpe08:0
+		gpe09:174
+		gpe0A:0
+		gpe0B:0
+		gpe0C:0
+		gpe0D:0
+		gpe0E:0
+		gpe0F:0
+		gpe10:0
+		gpe11:60
+		gpe12:0
+		gpe13:0
+		gpe14:0
+		gpe15:0
+		gpe16:0
+		gpe17:0
+		gpe18:0
+		gpe19:7
+		gpe1A:0
+		gpe1B:0
+		gpe1C:0
+		gpe1D:0
+		gpe1E:0
+		gpe1F:0
+		gpe_all:241
+		sci:241
+
+		sci - The total number of times the ACPI SCI
+		has claimed an interrupt.
+
+		gpe_all - count of SCI caused by GPEs.
+
+		gpeXX - count for individual GPE source
+
+		ff_gbl_lock - Global Lock
+
+		ff_pmtimer - PM Timer
+
+		ff_pwr_btn - Power Button
+
+		ff_rt_clk - Real Time Clock
+
+		ff_slp_btn - Sleep Button
+
+		error - an interrupt that can't be accounted for above.
+
+		Root has permission to clear any of these counters.  Eg.
+		# echo 0 > gpe11
+
+		All counters can be cleared by clearing the total "sci":
+		# echo 0 > sci
+
+		None of these counters has an effect on the function
+		of the system, they are simply statistics.
diff --git a/Documentation/acpi/dsdt-override.txt b/Documentation/acpi/dsdt-override.txt
new file mode 100644
index 0000000..5008f25
--- /dev/null
+++ b/Documentation/acpi/dsdt-override.txt
@@ -0,0 +1,15 @@
+Linux supports two methods of overriding the BIOS DSDT:
+
+CONFIG_ACPI_CUSTOM_DSDT builds the image into the kernel.
+
+CONFIG_ACPI_CUSTOM_DSDT_INITRD adds the image to the initrd.
+
+When to use these methods is described in detail on the
+Linux/ACPI home page:
+http://www.lesswatts.org/projects/acpi/overridingDSDT.php
+
+Note that if both options are used, the DSDT supplied
+by the INITRD method takes precedence.
+
+Documentation/initramfs-add-dsdt.sh is provided for convenience
+for use with the CONFIG_ACPI_CUSTOM_DSDT_INITRD method.
diff --git a/Documentation/acpi/initramfs-add-dsdt.sh b/Documentation/acpi/initramfs-add-dsdt.sh
new file mode 100755
index 0000000..17ef6e8
--- /dev/null
+++ b/Documentation/acpi/initramfs-add-dsdt.sh
@@ -0,0 +1,43 @@
+#!/bin/bash
+# Adds a DSDT file to the initrd (if it's an initramfs)
+# first argument is the name of archive
+# second argument is the name of the file to add
+# The file will be copied as /DSDT.aml
+
+# 20060126: fix "Premature end of file" with some old cpio (Roland Robic)
+# 20060205: this time it should really work
+
+# check the arguments
+if [ $# -ne 2 ]; then
+	program_name=$(basename $0)
+	echo "\
+$program_name: too few arguments
+Usage: $program_name initrd-name.img DSDT-to-add.aml
+Adds a DSDT file to an initrd (in initramfs format)
+
+  initrd-name.img: filename of the initrd in initramfs format
+  DSDT-to-add.aml: filename of the DSDT file to add
+  " 1>&2
+    exit 1
+fi
+
+# we should check it's an initramfs
+
+tempcpio=$(mktemp -d)
+# cleanup on exit, hangup, interrupt, quit, termination
+trap 'rm -rf $tempcpio' 0 1 2 3 15
+
+# extract the archive
+gunzip -c "$1" > "$tempcpio"/initramfs.cpio || exit 1
+
+# copy the DSDT file at the root of the directory so that we can call it "/DSDT.aml"
+cp -f "$2" "$tempcpio"/DSDT.aml
+
+# add the file
+cd "$tempcpio"
+(echo DSDT.aml | cpio --quiet -H newc -o -A -O "$tempcpio"/initramfs.cpio) || exit 1
+cd "$OLDPWD"
+
+# re-compress the archive
+gzip -c "$tempcpio"/initramfs.cpio > "$1"
+
diff --git a/Documentation/acpi/method-tracing.txt b/Documentation/acpi/method-tracing.txt
new file mode 100644
index 0000000..f6efb1e
--- /dev/null
+++ b/Documentation/acpi/method-tracing.txt
@@ -0,0 +1,26 @@
+/sys/module/acpi/parameters/:
+
+trace_method_name
+	The AML method name that the user wants to trace
+
+trace_debug_layer
+	The temporary debug_layer used when tracing the method.
+	Using 0xffffffff by default if it is 0.
+
+trace_debug_level
+	The temporary debug_level used when tracing the method.
+	Using 0x00ffffff by default if it is 0.
+
+trace_state
+	The status of the tracing feature.
+
+	"enabled" means this feature is enabled
+	and the AML method is traced every time it's executed.
+
+	"1" means this feature is enabled and the AML method
+	will only be traced during the next execution.
+
+	"disabled" means this feature is disabled.
+	Users can enable/disable this debug tracing feature by
+	"echo string > /sys/module/acpi/parameters/trace_state".
+	"string" should be one of "enable", "disable" and "1".
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 8fd5aa4..0dcbd26 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -147,8 +147,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			default: 0
 
 	acpi_sleep=	[HW,ACPI] Sleep options
-			Format: { s3_bios, s3_mode }
-			See Documentation/power/video.txt
+			Format: { s3_bios, s3_mode, s3_beep }
+			See Documentation/power/video.txt for s3_bios and s3_mode.
+			s3_beep is for debugging; it makes the PC's speaker beep
+			as soon as the kernel's real-mode entry point is called.
 
 	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
 			Format: { level | edge | high | low }
@@ -175,6 +177,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	acpi_no_auto_ssdt	[HW,ACPI] Disable automatic loading of SSDT
 
+	acpi_no_initrd_override	[KNL,ACPI]
+			Disable loading custom ACPI tables from the initramfs
+
 	acpi_os_name=	[HW,ACPI] Tell ACPI BIOS the name of the OS
 			Format: To spoof as Windows 98: ="Microsoft Windows"
 
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
index aea7e92..9d60ab7 100644
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@@ -386,6 +386,11 @@ before suspending; then remount them after resuming.
 There is a work-around for this problem.  For more information, see
 Documentation/usb/persist.txt.
 
+Q: Can I suspend-to-disk using a swap partition under LVM?
+
+A: No. You can suspend successfully, but you'll not be able to
+resume. uswsusp should be able to work with LVM. See suspend.sf.net.
+
 Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
 compiled with the similar configuration files. Anyway I found that
 suspend to disk (and resume) is much slower on 2.6.16 compared to
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
new file mode 100644
index 0000000..5776e09
--- /dev/null
+++ b/Documentation/thermal/sysfs-api.txt
@@ -0,0 +1,246 @@
+Generic Thermal Sysfs driver How To
+=========================
+
+Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com>
+
+Updated: 2 January 2008
+
+Copyright (c)  2008 Intel Corporation
+
+
+0. Introduction
+
+The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors)
+and thermal cooling devices (fan, processor...) to register with the thermal management
+solution and to be a part of it.
+
+This how-to focusses on enabling new thermal zone and cooling devices to participate
+in thermal management.
+This solution is platform independent and any type of thermal zone devices and
+cooling devices should be able to make use of the infrastructure.
+
+The main task of the thermal sysfs driver is to expose thermal zone attributes as well
+as cooling device attributes to the user space.
+An intelligent thermal management application can make decisions based on inputs
+from thermal zone attributes (the current temperature and trip point temperature)
+and throttle appropriate devices.
+
+[0-*]	denotes any positive number starting from 0
+[1-*]	denotes any positive number starting from 1
+
+1. thermal sysfs driver interface functions
+
+1.1 thermal zone device interface
+1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips,
+				void *devdata, struct thermal_zone_device_ops *ops)
+
+	This interface function adds a new thermal zone device (sensor) to
+	/sys/class/thermal folder as thermal_zone[0-*].
+	It tries to bind all the thermal cooling devices registered at the same time.
+
+	name: the thermal zone name.
+	trips: the total number of trip points this thermal zone supports.
+	devdata: device private data
+	ops: thermal zone device callbacks.
+		.bind: bind the thermal zone device with a thermal cooling device.
+		.unbind: unbing the thermal zone device with a thermal cooling device.
+		.get_temp: get the current temperature of the thermal zone.
+		.get_mode: get the current mode (user/kernel) of the thermal zone.
+			   "kernel" means thermal management is done in kernel.
+			   "user" will prevent kernel thermal driver actions upon trip points
+			   so that user applications can take charge of thermal management.
+		.set_mode: set the mode (user/kernel) of the thermal zone.
+		.get_trip_type: get the type of certain trip point.
+		.get_trip_temp: get the temperature above which the certain trip point
+				will be fired.
+
+1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
+
+	This interface function removes the thermal zone device.
+	It deletes the corresponding entry form /sys/class/thermal folder and unbind all
+	the thermal cooling devices it uses.
+
+1.2 thermal cooling device interface
+1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
+					void *devdata, struct thermal_cooling_device_ops *)
+
+	This interface function adds a new thermal cooling device (fan/processor/...) to
+	/sys/class/thermal/ folder as cooling_device[0-*].
+	It tries to bind itself to all the thermal zone devices register at the same time.
+	name: the cooling device name.
+	devdata: device private data.
+	ops: thermal cooling devices callbacks.
+		.get_max_state: get the Maximum throttle state of the cooling device.
+		.get_cur_state: get the Current throttle state of the cooling device.
+		.set_cur_state: set the Current throttle state of the cooling device.
+
+1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
+
+	This interface function remove the thermal cooling device.
+	It deletes the corresponding entry form /sys/class/thermal folder and unbind
+	itself from all	the thermal zone devices using it.
+
+1.3 interface for binding a thermal zone device with a thermal cooling device
+1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
+			int trip, struct thermal_cooling_device *cdev);
+
+	This interface function bind a thermal cooling device to the certain trip point
+	of a thermal zone device.
+	This function is usually called in the thermal zone device .bind callback.
+	tz: the thermal zone device
+	cdev: thermal cooling device
+	trip: indicates which trip point the cooling devices is associated with
+		 in this thermal zone.
+
+1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
+				int trip, struct thermal_cooling_device *cdev);
+
+	This interface function unbind a thermal cooling device from the certain trip point
+	of a thermal zone device.
+	This function is usually called in the thermal zone device .unbind callback.
+	tz: the thermal zone device
+	cdev: thermal cooling device
+	trip: indicates which trip point the cooling devices is associated with
+		in this thermal zone.
+
+2. sysfs attributes structure
+
+RO	read only value
+RW	read/write value
+
+All thermal sysfs attributes will be represented under /sys/class/thermal
+/sys/class/thermal/
+
+Thermal zone device sys I/F, created once it's registered:
+|thermal_zone[0-*]:
+	|-----type:			Type of the thermal zone
+	|-----temp:			Current temperature
+	|-----mode:			Working mode of the thermal zone
+	|-----trip_point_[0-*]_temp:	Trip point temperature
+	|-----trip_point_[0-*]_type:	Trip point type
+
+Thermal cooling device sys I/F, created once it's registered:
+|cooling_device[0-*]:
+	|-----type :			Type of the cooling device(processor/fan/...)
+	|-----max_state:		Maximum cooling state of the cooling device
+	|-----cur_state:		Current cooling state of the cooling device
+
+
+These two dynamic attributes are created/removed in pairs.
+They represent the relationship between a thermal zone and its associated cooling device.
+They are created/removed for each
+thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful exection.
+
+|thermal_zone[0-*]
+	|-----cdev[0-*]:		The [0-*]th cooling device in the current thermal zone
+	|-----cdev[0-*]_trip_point:	Trip point that cdev[0-*] is associated with
+
+
+***************************
+* Thermal zone attributes *
+***************************
+
+type				Strings which represent the thermal zone type.
+				This is given by thermal zone driver as part of registration.
+				Eg: "ACPI thermal zone" indicates it's a ACPI thermal device
+				RO
+				Optional
+
+temp				Current temperature as reported by thermal zone (sensor)
+				Unit: degree celsius
+				RO
+				Required
+
+mode				One of the predifned values in [kernel, user]
+				This file gives information about the algorithm
+				that is currently managing the thermal zone.
+				It can be either default kernel based algorithm
+				or user space application.
+				RW
+				Optional
+				kernel	= Thermal management in kernel thermal zone driver.
+				user	= Preventing kernel thermal zone driver actions upon
+					  trip points so that user application can take full
+					  charge of the thermal management.
+
+trip_point_[0-*]_temp		The temperature above which trip point will be fired
+				Unit: degree celsius
+				RO
+				Optional
+
+trip_point_[0-*]_type 		Strings which indicate the type of the trip point
+				Eg. it can be one of critical, hot, passive,
+				    active[0-*] for ACPI thermal zone.
+				RO
+				Optional
+
+cdev[0-*]			Sysfs link to the thermal cooling device node where the sys I/F
+				for cooling device throttling control represents.
+				RO
+				Optional
+
+cdev[0-*]_trip_point		The trip point with which cdev[0-*] is assocated in this thermal zone
+				-1 means the cooling device is not associated with any trip point.
+				RO
+				Optional
+
+******************************
+* Cooling device  attributes *
+******************************
+
+type				String which represents the type of device
+				eg: For generic ACPI: this should be "Fan",
+				"Processor" or "LCD"
+				eg. For memory controller device on intel_menlow platform:
+				this should be "Memory controller"
+				RO
+				Optional
+
+max_state			The maximum permissible cooling state of this cooling device.
+				RO
+				Required
+
+cur_state			The current cooling state of this cooling device.
+				the value can any integer numbers between 0 and max_state,
+				cur_state == 0 means no cooling
+				cur_state == max_state means the maximum cooling.
+				RW
+				Required
+
+3. A simple implementation
+
+ACPI thermal zone may support multiple trip points like critical/hot/passive/active.
+If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time,
+it may register itself as a thermale_zone_device (thermal_zone1) with 4 trip points in all.
+It has one processor and one fan, which are both registered as thermal_cooling_device.
+If the processor is listed in _PSL method, and the fan is listed in _AL0 method,
+the sys I/F structure will be built like this:
+
+/sys/class/thermal:
+
+|thermal_zone1:
+	|-----type:			ACPI thermal zone
+	|-----temp:			37
+	|-----mode:			kernel
+	|-----trip_point_0_temp:	100
+	|-----trip_point_0_type:	critical
+	|-----trip_point_1_temp:	80
+	|-----trip_point_1_type:	passive
+	|-----trip_point_2_temp:	70
+	|-----trip_point_2_type:	active[0]
+	|-----trip_point_3_temp:	60
+	|-----trip_point_3_type:	active[1]
+	|-----cdev0:			--->/sys/class/thermal/cooling_device0
+	|-----cdev0_trip_point:		1	/* cdev0 can be used for passive */
+	|-----cdev1:			--->/sys/class/thermal/cooling_device3
+	|-----cdev1_trip_point:		2	/* cdev1 can be used for active[0]*/
+
+|cooling_device0:
+	|-----type:			Processor
+	|-----max_state:		8
+	|-----cur_state:		0
+
+|cooling_device3:
+	|-----type:			Fan
+	|-----max_state:		2
+	|-----cur_state:		0
diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt
index 10c041c..6c24777 100644
--- a/Documentation/thinkpad-acpi.txt
+++ b/Documentation/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.17
-                         October 04th, 2007
+                            Version 0.19
+                         January 06th, 2008
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -215,6 +215,11 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file:
 	... any other 8-hex-digit mask ...
 	echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
 
+The procfs interface does not support NVRAM polling control.  So as to
+maintain maximum bug-to-bug compatibility, it does not report any masks,
+nor does it allow one to manipulate the hot key mask when the firmware
+does not support masks at all, even if NVRAM polling is in use.
+
 sysfs notes:
 
 	hotkey_bios_enabled:
@@ -231,17 +236,26 @@ sysfs notes:
 		to this value.
 
 	hotkey_enable:
-		Enables/disables the hot keys feature, and reports
-		current status of the hot keys feature.
+		Enables/disables the hot keys feature in the ACPI
+		firmware, and reports current status of the hot keys
+		feature.  Has no effect on the NVRAM hot key polling
+		functionality.
 
 		0: disables the hot keys feature / feature disabled
 		1: enables the hot keys feature / feature enabled
 
 	hotkey_mask:
-		bit mask to enable driver-handling and ACPI event
-		generation for each hot key (see above).  Returns the
-		current status of the hot keys mask, and allows one to
-		modify it.
+		bit mask to enable driver-handling (and depending on
+		the firmware, ACPI event generation) for each hot key
+		(see above).  Returns the current status of the hot keys
+		mask, and allows one to modify it.
+
+		Note: when NVRAM polling is active, the firmware mask
+		will be different from the value returned by
+		hotkey_mask.  The driver will retain enabled bits for
+		hotkeys that are under NVRAM polling even if the
+		firmware refuses them, and will not set these bits on
+		the firmware hot key mask.
 
 	hotkey_all_mask:
 		bit mask that should enable event reporting for all
@@ -257,12 +271,48 @@ sysfs notes:
 		handled by the firmware anyway.  Echo it to
 		hotkey_mask above, to use.
 
+	hotkey_source_mask:
+		bit mask that selects which hot keys will the driver
+		poll the NVRAM for.  This is auto-detected by the driver
+		based on the capabilities reported by the ACPI firmware,
+		but it can be overridden at runtime.
+
+		Hot keys whose bits are set in both hotkey_source_mask
+		and also on hotkey_mask are polled for in NVRAM.  Only a
+		few hot keys are available through CMOS NVRAM polling.
+
+		Warning: when in NVRAM mode, the volume up/down/mute
+		keys are synthesized according to changes in the mixer,
+		so you have to use volume up or volume down to unmute,
+		as per the ThinkPad volume mixer user interface.  When
+		in ACPI event mode, volume up/down/mute are reported as
+		separate events, but this behaviour may be corrected in
+		future releases of this driver, in which case the
+		ThinkPad volume mixer user interface semanthics will be
+		enforced.
+
+	hotkey_poll_freq:
+		frequency in Hz for hot key polling. It must be between
+		0 and 25 Hz.  Polling is only carried out when strictly
+		needed.
+
+		Setting hotkey_poll_freq to zero disables polling, and
+		will cause hot key presses that require NVRAM polling
+		to never be reported.
+
+		Setting hotkey_poll_freq too low will cause repeated
+		pressings of the same hot key to be misreported as a
+		single key press, or to not even be detected at all.
+		The recommended polling frequency is 10Hz.
+
 	hotkey_radio_sw:
 		if the ThinkPad has a hardware radio switch, this
 		attribute will read 0 if the switch is in the "radios
 		disabled" postition, and 1 if the switch is in the
 		"radios enabled" position.
 
+		This attribute has poll()/select() support.
+
 	hotkey_report_mode:
 		Returns the state of the procfs ACPI event report mode
 		filter for hot keys.  If it is set to 1 (the default),
@@ -277,6 +327,25 @@ sysfs notes:
 		May return -EPERM (write access locked out by module
 		parameter) or -EACCES (read-only).
 
+	wakeup_reason:
+		Set to 1 if the system is waking up because the user
+		requested a bay ejection.  Set to 2 if the system is
+		waking up because the user requested the system to
+		undock.  Set to zero for normal wake-ups or wake-ups
+		due to unknown reasons.
+
+		This attribute has poll()/select() support.
+
+	wakeup_hotunplug_complete:
+		Set to 1 if the system was waken up because of an
+		undock or bay ejection request, and that request
+		was sucessfully completed.  At this point, it might
+		be useful to send the system back to sleep, at the
+		user's choice.  Refer to HKEY events 0x4003 and
+		0x3003, below.
+
+		This attribute has poll()/select() support.
+
 input layer notes:
 
 A Hot key is mapped to a single input layer EV_KEY event, possibly
@@ -427,6 +496,23 @@ Non hot-key ACPI HKEY event map:
 The above events are not propagated by the driver, except for legacy
 compatibility purposes when hotkey_report_mode is set to 1.
 
+0x2304		System is waking up from suspend to undock
+0x2305		System is waking up from suspend to eject bay
+0x2404		System is waking up from hibernation to undock
+0x2405		System is waking up from hibernation to eject bay
+
+The above events are never propagated by the driver.
+
+0x3003		Bay ejection (see 0x2x05) complete, can sleep again
+0x4003		Undocked (see 0x2x04), can sleep again
+0x5009		Tablet swivel: switched to tablet mode
+0x500A		Tablet swivel: switched to normal mode
+0x500B		Tablet pen insterted into its storage bay
+0x500C		Tablet pen removed from its storage bay
+0x5010		Brightness level changed (newer Lenovo BIOSes)
+
+The above events are propagated by the driver.
+
 Compatibility notes:
 
 ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never
@@ -1263,3 +1349,17 @@ Sysfs interface changelog:
 		and the hwmon class for libsensors4 (lm-sensors 3)
 		compatibility.  Moved all hwmon attributes to this
 		new platform device.
+
+0x020100:	Marker for thinkpad-acpi with hot key NVRAM polling
+		support.  If you must, use it to know you should not
+		start an userspace NVRAM poller (allows to detect when
+		NVRAM is compiled out by the user because it is
+		unneeded/undesired in the first place).
+0x020101:	Marker for thinkpad-acpi with hot key NVRAM polling
+		and proper hotkey_mask semanthics (version 8 of the
+		NVRAM polling patch).  Some development snapshots of
+		0.18 had an earlier version that did strange things
+		to hotkey_mask.
+
+0x020200:	Add poll()/select() support to the following attributes:
+		hotkey_radio_sw, wakeup_hotunplug_complete, wakeup_reason