summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-09-12 16:14:49 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-09-12 16:14:49 -0700
commit5a7d8a28080caed7fd4cb1b81d092adac4445e8e (patch)
tree7d410cdd62dfebb24c22ccb8895efd9acf74ddb9 /Documentation
parente0ea4045bce3cee84e35746fb98946ca36781248 (diff)
parenteb37e6ddf75a3d4c59e38193a7c8d409f5bd7d57 (diff)
downloadop-kernel-dev-5a7d8a28080caed7fd4cb1b81d092adac4445e8e.zip
op-kernel-dev-5a7d8a28080caed7fd4cb1b81d092adac4445e8e.tar.gz
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle: "This has been sitting in -next for a while with no objections and all MIPS defconfigs except one are building fine; that one platform got broken by another patch in your tree and I'm going to submit a patch separately. - a handful of fixes that didn't make 3.11 - a few bits of Octeon 3 support with more to come for a later release - platform enhancements for Octeon, ath79, Lantiq, Netlogic and Ralink SOCs - a GPIO driver for the Octeon - some dusting off of the DECstation code - the usual dose of cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (65 commits) MIPS: DMA: Fix BUG due to smp_processor_id() in preemptible code MIPS: kexec: Fix random crashes while loading crashkernel MIPS: kdump: Skip walking indirection page for crashkernels MIPS: DECstation HRT calibration bug fixes MIPS: Export copy_from_user_page() (needed by lustre) MIPS: Add driver for the built-in PCI controller of the RT3883 SoC MIPS: DMA: For BMIPS5000 cores flush region just like non-coherent R10000 MIPS: ralink: Add support for reset-controller API MIPS: ralink: mt7620: Add cpu-feature-override header MIPS: ralink: mt7620: Add spi clock definition MIPS: ralink: mt7620: Add wdt clock definition MIPS: ralink: mt7620: Improve clock frequency detection MIPS: ralink: mt7620: This SoC has EHCI and OHCI hosts MIPS: ralink: mt7620: Add verbose ram info MIPS: ralink: Probe clocksources from OF MIPS: ralink: Add support for systick timer found on newer ralink SoC MIPS: ralink: Add support for periodic timer irq MIPS: Netlogic: Built-in DTB for XLP2xx SoC boards MIPS: Netlogic: Add support for USB on XLP2xx MIPS: Netlogic: XLP2xx update for I2C controller ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt190
1 files changed, 190 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
new file mode 100644
index 0000000..8e0a1eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
@@ -0,0 +1,190 @@
+* Mediatek/Ralink RT3883 PCI controller
+
+1) Main node
+
+ Required properties:
+
+ - compatible: must be "ralink,rt3883-pci"
+
+ - reg: specifies the physical base address of the controller and
+ the length of the memory mapped region.
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 1.
+
+ - #size-cells: specifies the number of cells used to represent the size
+ of an address. The value must be 1.
+
+ - ranges: specifies the translation between child address space and parent
+ address space
+
+ Optional properties:
+
+ - status: indicates the operational status of the device.
+ Value must be either "disabled" or "okay".
+
+2) Child nodes
+
+ The main node must have two child nodes which describes the built-in
+ interrupt controller and the PCI host bridge.
+
+ a) Interrupt controller:
+
+ Required properties:
+
+ - interrupt-controller: identifies the node as an interrupt controller
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 0. As such, 'interrupt-map' nodes do not
+ have to specify a parent unit address.
+
+ - #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+
+ - interrupt-parent: the phandle for the interrupt controller that
+ services interrupts for this device.
+
+ - interrupts: specifies the interrupt source of the parent interrupt
+ controller. The format of the interrupt specifier depends on the
+ parent interrupt controller.
+
+ b) PCI host bridge:
+
+ Required properties:
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 0.
+
+ - #size-cells: specifies the number of cells used to represent the size
+ of an address. The value must be 2.
+
+ - #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+
+ - device_type: must be "pci"
+
+ - bus-range: PCI bus numbers covered
+
+ - ranges: specifies the ranges for the PCI memory and I/O regions
+
+ - interrupt-map-mask,
+ - interrupt-map: standard PCI properties to define the mapping of the
+ PCI interface to interrupt numbers.
+
+ The PCI host bridge node migh have additional sub-nodes representing
+ the onboard PCI devices/PCI slots. Each such sub-node must have the
+ following mandatory properties:
+
+ - reg: used only for interrupt mapping, so only the first four bytes
+ are used to refer to the correct bus number and device number.
+
+ - device_type: must be "pci"
+
+ If a given sub-node represents a PCI bridge it must have following
+ mandatory properties as well:
+
+ - #address-cells: must be set to <3>
+
+ - #size-cells: must set to <2>
+
+ - #interrupt-cells: must be set to <1>
+
+ - interrupt-map-mask,
+ - interrupt-map: standard PCI properties to define the mapping of the
+ PCI interface to interrupt numbers.
+
+ Besides the required properties the sub-nodes may have these optional
+ properties:
+
+ - status: indicates the operational status of the sub-node.
+ Value must be either "disabled" or "okay".
+
+3) Example:
+
+ a) SoC specific dtsi file:
+
+ pci@10140000 {
+ compatible = "ralink,rt3883-pci";
+ reg = <0x10140000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges; /* direct mapping */
+
+ status = "disabled";
+
+ pciintc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <4>;
+ };
+
+ host-bridge {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ device_type = "pci";
+
+ bus-range = <0 255>;
+ ranges = <
+ 0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
+ 0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
+ >;
+
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 17 */
+ 0x8800 0 0 1 &pciintc 18
+ 0x8800 0 0 2 &pciintc 18
+ 0x8800 0 0 3 &pciintc 18
+ 0x8800 0 0 4 &pciintc 18
+ /* IDSEL 18 */
+ 0x9000 0 0 1 &pciintc 19
+ 0x9000 0 0 2 &pciintc 19
+ 0x9000 0 0 3 &pciintc 19
+ 0x9000 0 0 4 &pciintc 19
+ >;
+
+ pci-bridge@1 {
+ reg = <0x0800 0 0 0 0>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ interrupt-map-mask = <0x0 0 0 0>;
+ interrupt-map = <0x0 0 0 0 &pciintc 20>;
+
+ status = "disabled";
+ };
+
+ pci-slot@17 {
+ reg = <0x8800 0 0 0 0>;
+ device_type = "pci";
+
+ status = "disabled";
+ };
+
+ pci-slot@18 {
+ reg = <0x9000 0 0 0 0>;
+ device_type = "pci";
+
+ status = "disabled";
+ };
+ };
+ };
+
+ b) Board specific dts file:
+
+ pci@10140000 {
+ status = "okay";
+
+ host-bridge {
+ pci-bridge@1 {
+ status = "okay";
+ };
+ };
+ };
OpenPOWER on IntegriCloud