Merge tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux

Pull more clock framework updates from Mike Turquette:
 "This contains the second half the of the clk changes for 3.16.

  They are simply fixes and code refactoring for the OMAP clock drivers.
  The sunxi clock driver changes include splitting out the one
  mega-driver into several smaller pieces and adding support for the A31
  SoC clocks"

* tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits)
  clk: sunxi: document PRCM clock compatible strings
  clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support
  clk: sun6i: Protect SDRAM gating bit
  clk: sun6i: Protect CPU clock
  clk: sunxi: Rework clock protection code
  clk: sunxi: Move the GMAC clock to a file of its own
  clk: sunxi: Move the 24M oscillator to a file of its own
  clk: sunxi: Remove calls to clk_put
  clk: sunxi: document new A31 USB clock compatible
  clk: sunxi: Implement A31 USB clock
  ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies
  CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies
  ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC)
  CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck
  CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)
  dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings
  ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock
  CLK: TI: gate: add composite interface clock to OMAP2 only build
  ARM: OMAP2: clock: add DT boot support for cpufreq_ck
  CLK: TI: OMAP2: add clock init support
  ...

6 files changed, 156 insertions, 9 deletions

diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index a5160d8..b9ec668 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -20,12 +20,15 @@ Required properties:
 	"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
 	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
 	"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
+	"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
 	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
 	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
 	"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
+	"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
 	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
 	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
 	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
+	"allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31
 	"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
 	"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
 	"allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing
@@ -41,6 +44,7 @@ Required properties:
 	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
 	"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
 	"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
+	"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
 
 Required properties for all clocks:
 - reg : shall be the control register address for the clock.
diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
index 7faf5a6..ade4dd4 100644
--- a/Documentation/devicetree/bindings/clock/ti/apll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/apll.txt
@@ -14,18 +14,32 @@ a subtype of a DPLL [2], although a simplified one at that.
 [2] Documentation/devicetree/bindings/clock/ti/dpll.txt
 
 Required properties:
-- compatible : shall be "ti,dra7-apll-clock"
+- compatible : shall be "ti,dra7-apll-clock" or "ti,omap2-apll-clock"
 - #clock-cells : from common clock binding; shall be set to 0.
 - clocks : link phandles of parent clocks (clk-ref and clk-bypass)
 - reg : address and length of the register set for controlling the APLL.
   It contains the information of registers in the following order:
-	"control" - contains the control register base address
-	"idlest" - contains the idlest register base address
+	"control" - contains the control register offset
+	"idlest" - contains the idlest register offset
+	"autoidle" - contains the autoidle register offset (OMAP2 only)
+- ti,clock-frequency : static clock frequency for the clock (OMAP2 only)
+- ti,idlest-shift : bit-shift for the idlest field (OMAP2 only)
+- ti,bit-shift : bit-shift for enable and autoidle fields (OMAP2 only)
 
 Examples:
-	apll_pcie_ck: apll_pcie_ck@4a008200 {
+	apll_pcie_ck: apll_pcie_ck {
 		#clock-cells = <0>;
 		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
-		reg = <0x4a00821c 0x4>, <0x4a008220 0x4>;
+		reg = <0x021c>, <0x0220>;
 		compatible = "ti,dra7-apll-clock";
 	};
+
+	apll96_ck: apll96_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-apll-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <2>;
+		ti,idlest-shift = <8>;
+		ti,clock-frequency = <96000000>;
+		reg = <0x0500>, <0x0530>, <0x0520>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt
index 30bfdb7..df57009 100644
--- a/Documentation/devicetree/bindings/clock/ti/dpll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt
@@ -24,12 +24,14 @@ Required properties:
 		"ti,omap4-dpll-core-clock",
 		"ti,omap4-dpll-m4xen-clock",
 		"ti,omap4-dpll-j-type-clock",
+		"ti,omap5-mpu-dpll-clock",
 		"ti,am3-dpll-no-gate-clock",
 		"ti,am3-dpll-j-type-clock",
 		"ti,am3-dpll-no-gate-j-type-clock",
 		"ti,am3-dpll-clock",
 		"ti,am3-dpll-core-clock",
 		"ti,am3-dpll-x2-clock",
+		"ti,omap2-dpll-core-clock",
 
 - #clock-cells : from common clock binding; shall be set to 0.
 - clocks : link phandles of parent clocks, first entry lists reference clock
@@ -41,6 +43,7 @@ Required properties:
 	"mult-div1" - contains the multiplier / divider register base address
 	"autoidle" - contains the autoidle register base address (optional)
   ti,am3-* dpll types do not have autoidle register
+  ti,omap2-* dpll type does not support idlest / autoidle registers
 
 Optional properties:
 - DPLL mode setting - defining any one or more of the following overrides
@@ -73,3 +76,10 @@ Examples:
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x90>, <0x5c>, <0x68>;
 	};
+
+	dpll_ck: dpll_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0500>, <0x0540>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
new file mode 100644
index 0000000..585e8c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
@@ -0,0 +1,96 @@
+Device Tree Clock bindings for ATL (Audio Tracking Logic) of DRA7 SoC.
+
+The ATL IP is used to generate clock to be used to synchronize baseband and
+audio codec. A single ATL IP provides four ATL clock instances sharing the same
+functional clock but can be configured to provide different clocks.
+ATL can maintain a clock averages to some desired frequency based on the bws/aws
+signals - can compensate the drift between the two ws signal.
+
+In order to provide the support for ATL and it's output clocks (which can be used
+internally within the SoC or external components) two sets of bindings is needed:
+
+Clock tree binding:
+This binding uses the common clock binding[1].
+To be able to integrate the ATL clocks with DT clock tree.
+Provides ccf level representation of the ATL clocks to be used by drivers.
+Since the clock instances are part of a single IP this binding is used as a node
+for the DT clock tree, the IP driver is needed to handle the actual configuration
+of the IP.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-atl-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles to functional clock of ATL
+
+Binding for the IP driver:
+This binding is used to configure the IP driver which is going to handle the
+configuration of the IP for the ATL clock instances.
+
+Required properties:
+- compatible : shall be "ti,dra7-atl"
+- reg : base address for the ATL IP
+- ti,provided-clocks : List of phandles to the clocks associated with the ATL
+- clocks : link phandles to functional clock of ATL
+- clock-names : Shall be set to "fck"
+- ti,hwmods : Shall be set to "atl"
+
+Optional properties:
+Configuration of ATL instances:
+- atl{0/1/2/3} {
+	- bws : Baseband word select signal selection
+	- aws : Audio word select signal selection
+};
+
+For valid word select signals, see the dt-bindings/clk/ti-dra7-atl.h include
+file.
+
+Examples:
+/* clock bindings for atl provided clocks */
+atl_clkin0_ck: atl_clkin0_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin1_ck: atl_clkin1_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin2_ck: atl_clkin2_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin3_ck: atl_clkin3_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+/* binding for the IP */
+atl: atl@4843c000 {
+	compatible = "ti,dra7-atl";
+	reg = <0x4843c000 0x3ff>;
+	ti,hwmods = "atl";
+	ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+				<&atl_clkin2_ck>, <&atl_clkin3_ck>;
+	clocks = <&atl_gfclk_mux>;
+	clock-names = "fck";
+	status = "disabled";
+};
+
+#include <dt-bindings/clk/ti-dra7-atl.h>
+
+&atl {
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
index 125281a..03f8fde 100644
--- a/Documentation/devicetree/bindings/clock/ti/gate.txt
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -25,6 +25,11 @@ Required properties:
 			  to map clockdomains properly
   "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling,
 			  required for a hardware errata
+  "ti,composite-gate-clock" - composite gate clock, to be part of composite
+			      clock
+  "ti,composite-no-wait-gate-clock" - composite gate clock that does not wait
+				      for clock to be active before returning
+				      from clk_enable()
 - #clock-cells : from common clock binding; shall be set to 0
 - clocks : link to phandle of parent clock
 - reg : offset for register controlling adjustable gate, not needed for
@@ -41,7 +46,7 @@ Examples:
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&core_96m_fck>;
-		reg = <0x48004a00 0x4>;
+		reg = <0x0a00>;
 		ti,bit-shift = <25>;
 	};
 
@@ -57,7 +62,7 @@ Examples:
 		#clock-cells = <0>;
 		compatible = "ti,dss-gate-clock";
 		clocks = <&dpll4_m4x2_ck>;
-		reg = <0x48004e00 0x4>;
+		reg = <0x0e00>;
 		ti,bit-shift = <0>;
 	};
 
@@ -65,7 +70,7 @@ Examples:
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
-		reg = <0x4800259c 0x4>;
+		reg = <0x059c>;
 		ti,bit-shift = <1>;
 	};
 
@@ -80,6 +85,22 @@ Examples:
 		compatible = "ti,hsdiv-gate-clock";
 		clocks = <&dpll4_m2x2_mul_ck>;
 		ti,bit-shift = <0x1b>;
-		reg = <0x48004d00 0x4>;
+		reg = <0x0d00>;
 		ti,set-bit-to-disable;
 	};
+
+	vlynq_gate_fck: vlynq_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0200>;
+	};
+
+	sys_clkout2_src_gate: sys_clkout2_src_gate {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0070>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
index 064e8ca..3111a40 100644
--- a/Documentation/devicetree/bindings/clock/ti/interface.txt
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -21,6 +21,8 @@ Required properties:
   "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling
   "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling
   "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling
+  "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW
+				  handling
 - #clock-cells : from common clock binding; shall be set to 0
 - clocks : link to phandle of parent clock
 - reg : base address for the control register