Merge tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Documentation for digital TV (both kAPI and uAPI) are now in sync
   with the implementation (except for legacy/deprecated ioctls). This
   is a major step, as there were always a gap there

 - New sensor driver: imx274

 - New cec driver: cec-gpio

 - New platform driver for rockship rga and tegra CEC

 - New RC driver: tango-ir

 - Several cleanups at atomisp driver

 - Core improvements for RC, CEC, V4L2 async probing support and DVB

 - Lots of drivers cleanup, fixes and improvements.

* tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits)
  dvb_frontend: don't use-after-free the frontend struct
  media: dib0700: fix invalid dvb_detach argument
  media: v4l2-ctrls: Don't validate BITMASK twice
  media: s5p-mfc: fix lockdep warning
  media: dvb-core: always call invoke_release() in fe_free()
  media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep
  media: au0828: make const array addr_list static
  media: cx88: make const arrays default_addr_list and pvr2000_addr_list static
  media: drxd: make const array fastIncrDecLUT static
  media: usb: fix spelling mistake: "synchronuously" -> "synchronously"
  media: ddbridge: fix build warnings
  media: av7110: avoid 2038 overflow in debug print
  media: Don't do DMA on stack for firmware upload in the AS102 driver
  media: v4l: async: fix unregister for implicitly registered sub-device notifiers
  media: v4l: async: fix return of unitialized variable ret
  media: imx274: fix missing return assignment from call to imx274_mode_regs
  media: camss-vfe: always initialize reg at vfe_set_xbar_cfg()
  media: atomisp: make function calls cleaner
  media: atomisp: get rid of storage_class.h
  media: atomisp: get rid of wrong stddef.h include
  ...

23 files changed, 818 insertions, 957 deletions

diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt
new file mode 100644
index 0000000..46a0bac
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec-gpio.txt
@@ -0,0 +1,32 @@
+* HDMI CEC GPIO driver
+
+The HDMI CEC GPIO module supports CEC implementations where the CEC line
+is hooked up to a pull-up GPIO line and - optionally - the HPD line is
+hooked up to another GPIO line.
+
+Required properties:
+  - compatible: value must be "cec-gpio".
+  - cec-gpios: gpio that the CEC line is connected to. The line should be
+    tagged as open drain.
+
+If the CEC line is associated with an HDMI receiver/transmitter, then the
+following property is also required:
+
+  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
+
+If the CEC line is not associated with an HDMI receiver/transmitter, then
+the following property is optional:
+
+  - hpd-gpios: gpio that the HPD line is connected to.
+
+Example for the Raspberry Pi 3 where the CEC line is connected to
+pin 26 aka BCM7 aka CE1 on the GPIO pin header and the HPD line is
+connected to pin 11 aka BCM17:
+
+#include <dt-bindings/gpio/gpio.h>
+
+cec-gpio {
+       compatible = "cec-gpio";
+       cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+       hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
index 26ca25b..0d4fdae 100644
--- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt
+++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
@@ -3,8 +3,11 @@
 G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs.
 
 Required properties:
-- compatible: should be "samsung,exynos5-gsc" (for Exynos 5250, 5420 and
-	      5422 SoCs) or "samsung,exynos5433-gsc" (Exynos 5433)
+- compatible: should be one of
+	      "samsung,exynos5250-gsc"
+	      "samsung,exynos5420-gsc"
+	      "samsung,exynos5433-gsc"
+	      "samsung,exynos5-gsc" (deprecated)
 - reg: should contain G-Scaler physical address location and length.
 - interrupts: should contain G-Scaler interrupt number
 
@@ -15,7 +18,7 @@ Optional properties:
 Example:
 
 gsc_0:  gsc@0x13e00000 {
-	compatible = "samsung,exynos5-gsc";
+	compatible = "samsung,exynos5250-gsc";
 	reg = <0x13e00000 0x1000>;
 	interrupts = <0 85 0>;
 };
diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt
new file mode 100644
index 0000000..80f2e89
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt
@@ -0,0 +1,33 @@
+* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor
+
+The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with
+an active array size of 3864H x 2202V. It is programmable through I2C
+interface. The I2C address is fixed to 0x1a as per sensor data sheet.
+Image data is sent through MIPI CSI-2, which is configured as 4 lanes
+at 1440 Mbps.
+
+
+Required Properties:
+- compatible: value should be "sony,imx274" for imx274 sensor
+- reg: I2C bus address of the device
+
+Optional Properties:
+- reset-gpios: Sensor reset GPIO
+
+The imx274 device node should contain one 'port' child node with
+an 'endpoint' subnode. For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+	sensor@1a {
+		compatible = "sony,imx274";
+		reg = <0x1a>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reset-gpios = <&gpio_sensor 0 0>;
+		port {
+			sensor_out: endpoint {
+				remote-endpoint = <&csiss_in>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
index 855e1fa..33f10a9 100644
--- a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
+++ b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
@@ -27,6 +27,8 @@ Optional properties
 - nokia,nvm-size: The size of the NVM, in bytes. If the size is not given,
   the NVM contents will not be read.
 - reset-gpios: XSHUTDOWN GPIO
+- flash-leds: See ../video-interfaces.txt
+- lens-focus: See ../video-interfaces.txt
 
 
 Endpoint node mandatory properties
diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.txt b/Documentation/devicetree/bindings/media/rockchip-rga.txt
new file mode 100644
index 0000000..fd5276a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip-rga.txt
@@ -0,0 +1,33 @@
+device-tree bindings for rockchip 2D raster graphic acceleration controller (RGA)
+
+RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D
+graphics operations, such as point/line drawing, image scaling, rotation,
+BitBLT, alpha blending and image blur/sharpness.
+
+Required properties:
+- compatible: value should be one of the following
+		"rockchip,rk3288-rga";
+		"rockchip,rk3399-rga";
+
+- interrupts: RGA interrupt specifier.
+
+- clocks: phandle to RGA sclk/hclk/aclk clocks
+
+- clock-names: should be "aclk", "hclk" and "sclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: should be "core", "axi" and "ahb"
+
+Example:
+SoC-specific DT entry:
+	rga: rga@ff680000 {
+		compatible = "rockchip,rk3399-rga";
+		reg = <0xff680000 0x10000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
+		clock-names = "aclk", "hclk", "sclk";
+
+		resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
+		reset-names = "core, "axi", "ahb";
+	};
diff --git a/Documentation/devicetree/bindings/media/tango-ir.txt b/Documentation/devicetree/bindings/media/tango-ir.txt
new file mode 100644
index 0000000..a9f00c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/tango-ir.txt
@@ -0,0 +1,21 @@
+Sigma Designs Tango IR NEC/RC-5/RC-6 decoder (SMP86xx and SMP87xx)
+
+Required properties:
+
+- compatible: "sigma,smp8642-ir"
+- reg: address/size of NEC+RC5 area, address/size of RC6 area
+- interrupts: spec for IR IRQ
+- clocks: spec for IR clock (typically the crystal oscillator)
+
+Optional properties:
+
+- linux,rc-map-name: see Documentation/devicetree/bindings/media/rc.txt
+
+Example:
+
+	ir@10518 {
+		compatible = "sigma,smp8642-ir";
+		reg = <0x10518 0x18>, <0x105e0 0x1c>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&xtal>;
+	};
diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt
new file mode 100644
index 0000000..c503f06
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/tegra-cec.txt
@@ -0,0 +1,27 @@
+* Tegra HDMI CEC hardware
+
+The HDMI CEC module is present in Tegra SoCs and its purpose is to
+handle communication between HDMI connected devices over the CEC bus.
+
+Required properties:
+  - compatible : value should be one of the following:
+	"nvidia,tegra114-cec"
+	"nvidia,tegra124-cec"
+	"nvidia,tegra210-cec"
+  - reg : Physical base address of the IP registers and length of memory
+	  mapped region.
+  - interrupts : HDMI CEC interrupt number to the CPU.
+  - clocks : from common clock binding: handle to HDMI CEC clock.
+  - clock-names : from common clock binding: must contain "cec",
+		  corresponding to the entry in the clocks property.
+  - hdmi-phandle : phandle to the HDMI controller, see also cec.txt.
+
+Example:
+
+cec@70015000 {
+	compatible = "nvidia,tegra124-cec";
+	reg = <0x0 0x70015000 0x0 0x00001000>;
+	interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&tegra_car TEGRA124_CLK_CEC>;
+	clock-names = "cec";
+};
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index 852041a..3994b01 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -55,6 +55,15 @@ divided into two separate ITU-R BT.656 8-bit busses.  In such case bus-width
 and data-shift properties can be used to assign physical data lines to each
 endpoint node (logical bus).
 
+Documenting bindings for devices
+--------------------------------
+
+All required and optional bindings the device supports shall be explicitly
+documented in device DT binding documentation. This also includes port and
+endpoint nodes for the device, including unit-addresses and reg properties where
+relevant.
+
+Please also see Documentation/devicetree/bindings/graph.txt .
 
 Required properties
 -------------------
@@ -67,6 +76,16 @@ are required in a relevant parent node:
 		    identifier, should be 1.
  - #size-cells    : should be zero.
 
+
+Optional properties
+-------------------
+
+- flash-leds: An array of phandles, each referring to a flash LED, a sub-node
+  of the LED driver device node.
+
+- lens-focus: A phandle to the node of the focus lens controller.
+
+
 Optional endpoint properties
 ----------------------------
 
@@ -99,7 +118,10 @@ Optional endpoint properties
   determines the logical lane number, while the value of an entry indicates
   physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have
   "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0.
-  This property is valid for serial busses only (e.g. MIPI CSI-2).
+  If the hardware does not support lane reordering, monotonically
+  incremented values shall be used from 0 or 1 onwards, depending on
+  whether or not there is also a clock lane. This property is valid for
+  serial busses only (e.g. MIPI CSI-2).
 - clock-lanes: an array of physical clock lane indexes. Position of an entry
   determines the logical lane number, while the value of an entry indicates
   physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;",
diff --git a/Documentation/media/cec.h.rst.exceptions b/Documentation/media/cec.h.rst.exceptions
index b168753..d9fd092 100644
--- a/Documentation/media/cec.h.rst.exceptions
+++ b/Documentation/media/cec.h.rst.exceptions
@@ -24,8 +24,6 @@ ignore define CEC_VENDOR_ID_NONE
 ignore define CEC_MODE_INITIATOR_MSK
 ignore define CEC_MODE_FOLLOWER_MSK
 
-ignore define CEC_EVENT_FL_INITIAL_STATE
-
 # Part of CEC 2.0 spec - shouldn't be documented too?
 ignore define CEC_LOG_ADDR_TV
 ignore define CEC_LOG_ADDR_RECORD_1
diff --git a/Documentation/media/kapi/cec-core.rst b/Documentation/media/kapi/cec-core.rst
index 2886625..d37e107 100644
--- a/Documentation/media/kapi/cec-core.rst
+++ b/Documentation/media/kapi/cec-core.rst
@@ -227,8 +227,8 @@ CEC_TX_STATUS_LOW_DRIVE:
 	retransmission.
 
 CEC_TX_STATUS_ERROR:
-	some unspecified error occurred: this can be one of
-	the previous two if the hardware cannot differentiate or something
+	some unspecified error occurred: this can be one of ARB_LOST
+	or LOW_DRIVE if the hardware cannot differentiate or something
 	else entirely.
 
 CEC_TX_STATUS_MAX_RETRIES:
@@ -238,6 +238,9 @@ CEC_TX_STATUS_MAX_RETRIES:
 	doesn't have to make another attempt to transmit the message
 	since the hardware did that already.
 
+The hardware must be able to differentiate between OK, NACK and 'something
+else'.
+
 The \*_cnt arguments are the number of error conditions that were seen.
 This may be 0 if no information is available. Drivers that do not support
 hardware retry can just set the counter corresponding to the transmit error
diff --git a/Documentation/media/kapi/dtv-ca.rst b/Documentation/media/kapi/dtv-ca.rst
new file mode 100644
index 0000000..a4dd700
--- /dev/null
+++ b/Documentation/media/kapi/dtv-ca.rst
@@ -0,0 +1,4 @@
+Digital TV Conditional Access kABI
+----------------------------------
+
+.. kernel-doc:: drivers/media/dvb-core/dvb_ca_en50221.h
diff --git a/Documentation/media/kapi/dtv-common.rst b/Documentation/media/kapi/dtv-common.rst
new file mode 100644
index 0000000..40cf103
--- /dev/null
+++ b/Documentation/media/kapi/dtv-common.rst
@@ -0,0 +1,55 @@
+Digital TV Common functions
+---------------------------
+
+Math functions
+~~~~~~~~~~~~~~
+
+Provide some commonly-used math functions, usually required in order to
+estimate signal strength and signal to noise measurements in dB.
+
+.. kernel-doc:: drivers/media/dvb-core/dvb_math.h
+
+
+DVB devices
+~~~~~~~~~~~
+
+Those functions are responsible for handling the DVB device nodes.
+
+.. kernel-doc:: drivers/media/dvb-core/dvbdev.h
+
+Digital TV Ring buffer
+~~~~~~~~~~~~~~~~~~~~~~
+
+Those routines implement ring buffers used to handle digital TV data and
+copy it from/to userspace.
+
+.. note::
+
+  1) For performance reasons read and write routines don't check buffer sizes
+     and/or number of bytes free/available. This has to be done before these
+     routines are called. For example:
+
+   .. code-block:: c
+
+        /* write @buflen: bytes */
+        free = dvb_ringbuffer_free(rbuf);
+        if (free >= buflen)
+                count = dvb_ringbuffer_write(rbuf, buffer, buflen);
+        else
+                /* do something */
+
+        /* read min. 1000, max. @bufsize: bytes */
+        avail = dvb_ringbuffer_avail(rbuf);
+        if (avail >= 1000)
+                count = dvb_ringbuffer_read(rbuf, buffer, min(avail, bufsize));
+        else
+                /* do something */
+
+  2) If there is exactly one reader and one writer, there is no need
+     to lock read or write operations.
+     Two or more readers must be locked against each other.
+     Flushing the buffer counts as a read operation.
+     Resetting the buffer counts as a read and write operation.
+     Two or more writers must be locked against each other.
+
+.. kernel-doc:: drivers/media/dvb-core/dvb_ringbuffer.h
diff --git a/Documentation/media/kapi/dtv-core.rst b/Documentation/media/kapi/dtv-core.rst
index de9a228..bca743d 100644
--- a/Documentation/media/kapi/dtv-core.rst
+++ b/Documentation/media/kapi/dtv-core.rst
@@ -26,572 +26,12 @@ I2C bus.
    abandoned standard, not used anymore) and ATSC version 3.0 current
    proposals. Currently, the DVB subsystem doesn't implement those standards.
 
-Digital TV Common functions
----------------------------
 
-.. kernel-doc:: drivers/media/dvb-core/dvb_math.h
+.. toctree::
+    :maxdepth: 1
 
-.. kernel-doc:: drivers/media/dvb-core/dvbdev.h
-
-Digital TV Ring buffer
-----------------------
-
-Those routines implement ring buffers used to handle digital TV data and
-copy it from/to userspace.
-
-.. note::
-
-  1) For performance reasons read and write routines don't check buffer sizes
-     and/or number of bytes free/available. This has to be done before these
-     routines are called. For example:
-
-   .. code-block:: c
-
-        /* write @buflen: bytes */
-        free = dvb_ringbuffer_free(rbuf);
-        if (free >= buflen)
-                count = dvb_ringbuffer_write(rbuf, buffer, buflen);
-        else
-                /* do something */
-
-        /* read min. 1000, max. @bufsize: bytes */
-        avail = dvb_ringbuffer_avail(rbuf);
-        if (avail >= 1000)
-                count = dvb_ringbuffer_read(rbuf, buffer, min(avail, bufsize));
-        else
-                /* do something */
-
-  2) If there is exactly one reader and one writer, there is no need
-     to lock read or write operations.
-     Two or more readers must be locked against each other.
-     Flushing the buffer counts as a read operation.
-     Resetting the buffer counts as a read and write operation.
-     Two or more writers must be locked against each other.
-
-.. kernel-doc:: drivers/media/dvb-core/dvb_ringbuffer.h
-
-
-Digital TV Frontend kABI
-------------------------
-
-Digital TV Frontend
-~~~~~~~~~~~~~~~~~~~
-
-The Digital TV Frontend kABI defines a driver-internal interface for
-registering low-level, hardware specific driver to a hardware independent
-frontend layer. It is only of interest for Digital TV device driver writers.
-The header file for this API is named ``dvb_frontend.h`` and located in
-``drivers/media/dvb-core``.
-
-Demodulator driver
-^^^^^^^^^^^^^^^^^^
-
-The demodulator driver is responsible to talk with the decoding part of the
-hardware. Such driver should implement :c:type:`dvb_frontend_ops`, with
-tells what type of digital TV standards are supported, and points to a
-series of functions that allow the DVB core to command the hardware via
-the code under ``drivers/media/dvb-core/dvb_frontend.c``.
-
-A typical example of such struct in a driver ``foo`` is::
-
-	static struct dvb_frontend_ops foo_ops = {
-		.delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
-		.info = {
-			.name	= "foo DVB-T/T2/C driver",
-			.caps = FE_CAN_FEC_1_2 |
-				FE_CAN_FEC_2_3 |
-				FE_CAN_FEC_3_4 |
-				FE_CAN_FEC_5_6 |
-				FE_CAN_FEC_7_8 |
-				FE_CAN_FEC_AUTO |
-				FE_CAN_QPSK |
-				FE_CAN_QAM_16 |
-				FE_CAN_QAM_32 |
-				FE_CAN_QAM_64 |
-				FE_CAN_QAM_128 |
-				FE_CAN_QAM_256 |
-				FE_CAN_QAM_AUTO |
-				FE_CAN_TRANSMISSION_MODE_AUTO |
-				FE_CAN_GUARD_INTERVAL_AUTO |
-				FE_CAN_HIERARCHY_AUTO |
-				FE_CAN_MUTE_TS |
-				FE_CAN_2G_MODULATION,
-			.frequency_min = 42000000, /* Hz */
-			.frequency_max = 1002000000, /* Hz */
-			.symbol_rate_min = 870000,
-			.symbol_rate_max = 11700000
-		},
-		.init = foo_init,
-		.sleep = foo_sleep,
-		.release = foo_release,
-		.set_frontend = foo_set_frontend,
-		.get_frontend = foo_get_frontend,
-		.read_status = foo_get_status_and_stats,
-		.tune = foo_tune,
-		.i2c_gate_ctrl = foo_i2c_gate_ctrl,
-		.get_frontend_algo = foo_get_algo,
-	};
-
-A typical example of such struct in a driver ``bar`` meant to be used on
-Satellite TV reception is::
-
-	static const struct dvb_frontend_ops bar_ops = {
-		.delsys = { SYS_DVBS, SYS_DVBS2 },
-		.info = {
-			.name		= "Bar DVB-S/S2 demodulator",
-			.frequency_min	= 500000, /* KHz */
-			.frequency_max	= 2500000, /* KHz */
-			.frequency_stepsize	= 0,
-			.symbol_rate_min = 1000000,
-			.symbol_rate_max = 45000000,
-			.symbol_rate_tolerance = 500,
-			.caps = FE_CAN_INVERSION_AUTO |
-				FE_CAN_FEC_AUTO |
-				FE_CAN_QPSK,
-		},
-		.init = bar_init,
-		.sleep = bar_sleep,
-		.release = bar_release,
-		.set_frontend = bar_set_frontend,
-		.get_frontend = bar_get_frontend,
-		.read_status = bar_get_status_and_stats,
-		.i2c_gate_ctrl = bar_i2c_gate_ctrl,
-		.get_frontend_algo = bar_get_algo,
-		.tune = bar_tune,
-
-		/* Satellite-specific */
-		.diseqc_send_master_cmd = bar_send_diseqc_msg,
-		.diseqc_send_burst = bar_send_burst,
-		.set_tone = bar_set_tone,
-		.set_voltage = bar_set_voltage,
-	};
-
-.. note::
-
-   #) For satellite digital TV standards (DVB-S, DVB-S2, ISDB-S), the
-      frequencies are specified in kHz, while, for terrestrial and cable
-      standards, they're specified in Hz. Due to that, if the same frontend
-      supports both types, you'll need to have two separate
-      :c:type:`dvb_frontend_ops` structures, one for each standard.
-   #) The ``.i2c_gate_ctrl`` field is present only when the hardware has
-      allows controlling an I2C gate (either directly of via some GPIO pin),
-      in order to remove the tuner from the I2C bus after a channel is
-      tuned.
-   #) All new drivers should implement the
-      :ref:`DVBv5 statistics <dvbv5_stats>` via ``.read_status``.
-      Yet, there are a number of callbacks meant to get statistics for
-      signal strength, S/N and UCB. Those are there to provide backward
-      compatibility with legacy applications that don't support the DVBv5
-      API. Implementing those callbacks are optional. Those callbacks may be
-      removed in the future, after we have all existing drivers supporting
-      DVBv5 stats.
-   #) Other callbacks are required for satellite TV standards, in order to
-      control LNBf and DiSEqC: ``.diseqc_send_master_cmd``,
-      ``.diseqc_send_burst``, ``.set_tone``, ``.set_voltage``.
-
-.. |delta|   unicode:: U+00394
-
-The ``drivers/media/dvb-core/dvb_frontend.c`` has a kernel thread with is
-responsible for tuning the device. It supports multiple algoritms to
-detect a channel, as defined at enum :c:func:`dvbfe_algo`.
-
-The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver
-doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to
-``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning,
-e. g. it will try first to use the specified center frequency ``f``,
-then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|,
-``f`` - 2 x |delta| and so on.
-
-If the hardware has internally a some sort of zigzag algorithm, you should
-define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``.
-
-.. note::
-
-   The core frontend support also supports
-   a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to
-   define its own hardware-assisted algorithm. Very few hardware need to
-   use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other
-   function callbacks at struct :c:type:`dvb_frontend_ops`.
-
-Attaching frontend driver to the bridge driver
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Before using the Digital TV frontend core, the bridge driver should attach
-the frontend demod, tuner and SEC devices and call
-:c:func:`dvb_register_frontend()`,
-in order to register the new frontend at the subsystem. At device
-detach/removal, the bridge driver should call
-:c:func:`dvb_unregister_frontend()` to
-remove the frontend from the core and then :c:func:`dvb_frontend_detach()`
-to free the memory allocated by the frontend drivers.
-
-The drivers should also call :c:func:`dvb_frontend_suspend()` as part of
-their handler for the :c:type:`device_driver`.\ ``suspend()``, and
-:c:func:`dvb_frontend_resume()` as
-part of their handler for :c:type:`device_driver`.\ ``resume()``.
-
-A few other optional functions are provided to handle some special cases.
-
-.. _dvbv5_stats:
-
-Digital TV Frontend statistics
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Introduction
-^^^^^^^^^^^^
-
-Digital TV frontends provide a range of
-:ref:`statistics <frontend-stat-properties>` meant to help tuning the device
-and measuring the quality of service.
-
-For each statistics measurement, the driver should set the type of scale used,
-or ``FE_SCALE_NOT_AVAILABLE`` if the statistics is not available on a given
-time. Drivers should also provide the number of statistics for each type.
-that's usually 1 for most video standards [#f2]_.
-
-Drivers should initialize each statistic counters with length and
-scale at its init code. For example, if the frontend provides signal
-strength, it should have, on its init code::
-
-	struct dtv_frontend_properties *c = &state->fe.dtv_property_cache;
-
-	c->strength.len = 1;
-	c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
-
-And, when the statistics got updated, set the scale::
-
-	c->strength.stat[0].scale = FE_SCALE_DECIBEL;
-	c->strength.stat[0].uvalue = strength;
-
-.. [#f2] For ISDB-T, it may provide both a global statistics and a per-layer
-   set of statistics. On such cases, len should be equal to 4. The first
-   value corresponds to the global stat; the other ones to each layer, e. g.:
-
-   - c->cnr.stat[0] for global S/N carrier ratio,
-   - c->cnr.stat[1] for Layer A S/N carrier ratio,
-   - c->cnr.stat[2] for layer B S/N carrier ratio,
-   - c->cnr.stat[3] for layer C S/N carrier ratio.
-
-.. note:: Please prefer to use ``FE_SCALE_DECIBEL`` instead of
-   ``FE_SCALE_RELATIVE`` for signal strength and CNR measurements.
-
-Groups of statistics
-^^^^^^^^^^^^^^^^^^^^
-
-There are several groups of statistics currently supported:
-
-Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`)
-  - Measures the signal strength level at the analog part of the tuner or
-    demod.
-
-  - Typically obtained from the gain applied to the tuner and/or frontend
-    in order to detect the carrier. When no carrier is detected, the gain is
-    at the maximum value (so, strength is on its minimal).
-
-  - As the gain is visible through the set of registers that adjust the gain,
-    typically, this statistics is always available [#f3]_.
-
-  - Drivers should try to make it available all the times, as this statistics
-    can be used when adjusting an antenna position and to check for troubles
-    at the cabling.
-
-  .. [#f3] On a few devices, the gain keeps floating if no carrier.
-     On such devices, strength report should check first if carrier is
-     detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`),
-     and otherwise return the lowest possible value.
-
-Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`)
-  - Signal to Noise ratio for the main carrier.
-
-  - Signal to Noise measurement depends on the device. On some hardware, is
-    available when the main carrier is detected. On those hardware, CNR
-    measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``,
-    see :c:type:`fe_status`).
-
-    On other devices, it requires inner FEC decoding,
-    as the frontend measures it indirectly from other parameters (e. g. after
-    ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
-
-    Having it available after inner FEC is more common.
-
-Bit counts post-FEC (:ref:`DTV-STAT-POST-ERROR-BIT-COUNT` and :ref:`DTV-STAT-POST-TOTAL-BIT-COUNT`)
-  - Those counters measure the number of bits and bit errors errors after
-    the forward error correction (FEC) on the inner coding block
-    (after Viterbi, LDPC or other inner code).
-
-  - Due to its nature, those statistics depend on full coding lock
-    (e. g. after ``FE_HAS_SYNC`` or after ``FE_HAS_LOCK``,
-    see :c:type:`fe_status`).
-
-Bit counts pre-FEC (:ref:`DTV-STAT-PRE-ERROR-BIT-COUNT` and :ref:`DTV-STAT-PRE-TOTAL-BIT-COUNT`)
-  - Those counters measure the number of bits and bit errors errors before
-    the forward error correction (FEC) on the inner coding block
-    (before Viterbi, LDPC or other inner code).
-
-  - Not all frontends provide this kind of statistics.
-
-  - Due to its nature, those statistics depend on inner coding lock (e. g.
-    after ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
-
-Block counts (:ref:`DTV-STAT-ERROR-BLOCK-COUNT` and :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`)
-  - Those counters measure the number of blocks and block errors errors after
-    the forward error correction (FEC) on the inner coding block
-    (before Viterbi, LDPC or other inner code).
-
-  - Due to its nature, those statistics depend on full coding lock
-    (e. g. after ``FE_HAS_SYNC`` or after
-    ``FE_HAS_LOCK``, see :c:type:`fe_status`).
-
-.. note:: All counters should be monotonically increased as they're
-   collected from the hardware.
-
-A typical example of the logic that handle status and statistics is::
-
-	static int foo_get_status_and_stats(struct dvb_frontend *fe)
-	{
-		struct foo_state *state = fe->demodulator_priv;
-		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-
-		int rc;
-		enum fe_status *status;
-
-		/* Both status and strength are always available */
-		rc = foo_read_status(fe, &status);
-		if (rc < 0)
-			return rc;
-
-		rc = foo_read_strength(fe);
-		if (rc < 0)
-			return rc;
-
-		/* Check if CNR is available */
-		if (!(fe->status & FE_HAS_CARRIER))
-			return 0;
-
-		rc = foo_read_cnr(fe);
-		if (rc < 0)
-			return rc;
-
-		/* Check if pre-BER stats are available */
-		if (!(fe->status & FE_HAS_VITERBI))
-			return 0;
-
-		rc = foo_get_pre_ber(fe);
-		if (rc < 0)
-			return rc;
-
-		/* Check if post-BER stats are available */
-		if (!(fe->status & FE_HAS_SYNC))
-			return 0;
-
-		rc = foo_get_post_ber(fe);
-		if (rc < 0)
-			return rc;
-	}
-
-	static const struct dvb_frontend_ops ops = {
-		/* ... */
-		.read_status = foo_get_status_and_stats,
-	};
-
-Statistics collect
-^^^^^^^^^^^^^^^^^^
-
-On almost all frontend hardware, the bit and byte counts are stored by
-the hardware after a certain amount of time or after the total bit/block
-counter reaches a certain value (usually programable), for example, on
-every 1000 ms or after receiving 1,000,000 bits.
-
-So, if you read the registers too soon, you'll end by reading the same
-value as in the previous reading, causing the monotonic value to be
-incremented too often.
-
-Drivers should take the responsibility to avoid too often reads. That
-can be done using two approaches:
-
-if the driver have a bit that indicates when a collected data is ready
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-Driver should check such bit before making the statistics available.
-
-An example of such behavior can be found at this code snippet (adapted
-from mb86a20s driver's logic)::
-
-	static int foo_get_pre_ber(struct dvb_frontend *fe)
-	{
-		struct foo_state *state = fe->demodulator_priv;
-		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-		int rc, bit_error;
-
-		/* Check if the BER measures are already available */
-		rc = foo_read_u8(state, 0x54);
-		if (rc < 0)
-			return rc;
-
-		if (!rc)
-			return 0;
-
-		/* Read Bit Error Count */
-		bit_error = foo_read_u32(state, 0x55);
-		if (bit_error < 0)
-			return bit_error;
-
-		/* Read Total Bit Count */
-		rc = foo_read_u32(state, 0x51);
-		if (rc < 0)
-			return rc;
-
-		c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
-		c->pre_bit_error.stat[0].uvalue += bit_error;
-		c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
-		c->pre_bit_count.stat[0].uvalue += rc;
-
-		return 0;
-	}
-
-If the driver doesn't provide a statistics available check bit
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-A few devices, however, may not provide a way to check if the stats are
-available (or the way to check it is unknown). They may not even provide
-a way to directly read the total number of bits or blocks.
-
-On those devices, the driver need to ensure that it won't be reading from
-the register too often and/or estimate the total number of bits/blocks.
-
-On such drivers, a typical routine to get statistics would be like
-(adapted from dib8000 driver's logic)::
-
-	struct foo_state {
-		/* ... */
-
-		unsigned long per_jiffies_stats;
-	}
-
-	static int foo_get_pre_ber(struct dvb_frontend *fe)
-	{
-		struct foo_state *state = fe->demodulator_priv;
-		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-		int rc, bit_error;
-		u64 bits;
-
-		/* Check if time for stats was elapsed */
-		if (!time_after(jiffies, state->per_jiffies_stats))
-			return 0;
-
-		/* Next stat should be collected in 1000 ms */
-		state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000);
-
-		/* Read Bit Error Count */
-		bit_error = foo_read_u32(state, 0x55);
-		if (bit_error < 0)
-			return bit_error;
-
-		/*
-		 * On this particular frontend, there's no register that
-		 * would provide the number of bits per 1000ms sample. So,
-		 * some function would calculate it based on DTV properties
-		 */
-		bits = get_number_of_bits_per_1000ms(fe);
-
-		c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
-		c->pre_bit_error.stat[0].uvalue += bit_error;
-		c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
-		c->pre_bit_count.stat[0].uvalue += bits;
-
-		return 0;
-	}
-
-Please notice that, on both cases, we're getting the statistics using the
-:c:type:`dvb_frontend_ops` ``.read_status`` callback. The rationale is that
-the frontend core will automatically call this function periodically
-(usually, 3 times per second, when the frontend is locked).
-
-That warrants that we won't miss to collect a counter and increment the
-monotonic stats at the right time.
-
-Digital TV Frontend functions and types
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. kernel-doc:: drivers/media/dvb-core/dvb_frontend.h
-
-
-Digital TV Demux kABI
----------------------
-
-Digital TV Demux
-~~~~~~~~~~~~~~~~
-
-The Kernel Digital TV Demux kABI defines a driver-internal interface for
-registering low-level, hardware specific driver to a hardware independent
-demux layer. It is only of interest for Digital TV device driver writers.
-The header file for this kABI is named demux.h and located in
-drivers/media/dvb-core.
-
-The demux kABI should be implemented for each demux in the system. It is
-used to select the TS source of a demux and to manage the demux resources.
-When the demux client allocates a resource via the demux kABI, it receives
-a pointer to the kABI of that resource.
-
-Each demux receives its TS input from a DVB front-end or from memory, as
-set via this demux kABI. In a system with more than one front-end, the kABI
-can be used to select one of the DVB front-ends as a TS source for a demux,
-unless this is fixed in the HW platform.
-
-The demux kABI only controls front-ends regarding to their connections with
-demuxes; the kABI used to set the other front-end parameters, such as
-tuning, are devined via the Digital TV Frontend kABI.
-
-The functions that implement the abstract interface demux should be defined
-static or module private and registered to the Demux core for external
-access. It is not necessary to implement every function in the struct
-&dmx_demux. For example, a demux interface might support Section filtering,
-but not PES filtering. The kABI client is expected to check the value of any
-function pointer before calling the function: the value of ``NULL`` means
-that the function is not available.
-
-Whenever the functions of the demux API modify shared data, the
-possibilities of lost update and race condition problems should be
-addressed, e.g. by protecting parts of code with mutexes.
-
-Note that functions called from a bottom half context must not sleep.
-Even a simple memory allocation without using ``GFP_ATOMIC`` can result in a
-kernel thread being put to sleep if swapping is needed. For example, the
-Linux Kernel calls the functions of a network device interface from a
-bottom half context. Thus, if a demux kABI function is called from network
-device code, the function must not sleep.
-
-
-
-Demux Callback API
-------------------
-
-Demux Callback
-~~~~~~~~~~~~~~
-
-This kernel-space API comprises the callback functions that deliver filtered
-data to the demux client. Unlike the other DVB kABIs, these functions are
-provided by the client and called from the demux code.
-
-The function pointers of this abstract interface are not packed into a
-structure as in the other demux APIs, because the callback functions are
-registered and used independent of each other. As an example, it is possible
-for the API client to provide several callback functions for receiving TS
-packets and no callbacks for PES packets or sections.
-
-The functions that implement the callback API need not be re-entrant: when
-a demux driver calls one of these functions, the driver is not allowed to
-call the function again before the original call returns. If a callback is
-triggered by a hardware interrupt, it is recommended to use the Linux
-bottom half mechanism or start a tasklet instead of making the callback
-function call directly from a hardware interrupt.
-
-This mechanism is implemented by :c:func:`dmx_ts_cb()` and :c:func:`dmx_section_cb()`
-callbacks.
-
-.. kernel-doc:: drivers/media/dvb-core/demux.h
-
-Digital TV Conditional Access kABI
-----------------------------------
-
-.. kernel-doc:: drivers/media/dvb-core/dvb_ca_en50221.h
+    dtv-common
+    dtv-frontend
+    dtv-demux
+    dtv-ca
+    dtv-net
diff --git a/Documentation/media/kapi/dtv-demux.rst b/Documentation/media/kapi/dtv-demux.rst
new file mode 100644
index 0000000..7aa865a
--- /dev/null
+++ b/Documentation/media/kapi/dtv-demux.rst
@@ -0,0 +1,82 @@
+Digital TV Demux kABI
+---------------------
+
+Digital TV Demux
+~~~~~~~~~~~~~~~~
+
+The Kernel Digital TV Demux kABI defines a driver-internal interface for
+registering low-level, hardware specific driver to a hardware independent
+demux layer. It is only of interest for Digital TV device driver writers.
+The header file for this kABI is named ``demux.h`` and located in
+``drivers/media/dvb-core``.
+
+The demux kABI should be implemented for each demux in the system. It is
+used to select the TS source of a demux and to manage the demux resources.
+When the demux client allocates a resource via the demux kABI, it receives
+a pointer to the kABI of that resource.
+
+Each demux receives its TS input from a DVB front-end or from memory, as
+set via this demux kABI. In a system with more than one front-end, the kABI
+can be used to select one of the DVB front-ends as a TS source for a demux,
+unless this is fixed in the HW platform.
+
+The demux kABI only controls front-ends regarding to their connections with
+demuxes; the kABI used to set the other front-end parameters, such as
+tuning, are devined via the Digital TV Frontend kABI.
+
+The functions that implement the abstract interface demux should be defined
+static or module private and registered to the Demux core for external
+access. It is not necessary to implement every function in the struct
+:c:type:`dmx_demux`. For example, a demux interface might support Section filtering,
+but not PES filtering. The kABI client is expected to check the value of any
+function pointer before calling the function: the value of ``NULL`` means
+that the function is not available.
+
+Whenever the functions of the demux API modify shared data, the
+possibilities of lost update and race condition problems should be
+addressed, e.g. by protecting parts of code with mutexes.
+
+Note that functions called from a bottom half context must not sleep.
+Even a simple memory allocation without using ``GFP_ATOMIC`` can result in a
+kernel thread being put to sleep if swapping is needed. For example, the
+Linux Kernel calls the functions of a network device interface from a
+bottom half context. Thus, if a demux kABI function is called from network
+device code, the function must not sleep.
+
+Demux Callback API
+~~~~~~~~~~~~~~~~~~
+
+This kernel-space API comprises the callback functions that deliver filtered
+data to the demux client. Unlike the other DVB kABIs, these functions are
+provided by the client and called from the demux code.
+
+The function pointers of this abstract interface are not packed into a
+structure as in the other demux APIs, because the callback functions are
+registered and used independent of each other. As an example, it is possible
+for the API client to provide several callback functions for receiving TS
+packets and no callbacks for PES packets or sections.
+
+The functions that implement the callback API need not be re-entrant: when
+a demux driver calls one of these functions, the driver is not allowed to
+call the function again before the original call returns. If a callback is
+triggered by a hardware interrupt, it is recommended to use the Linux
+bottom half mechanism or start a tasklet instead of making the callback
+function call directly from a hardware interrupt.
+
+This mechanism is implemented by :c:func:`dmx_ts_cb()` and :c:func:`dmx_section_cb()`
+callbacks.
+
+Digital TV Demux device registration functions and data structures
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/media/dvb-core/dmxdev.h
+
+High-level Digital TV demux interface
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/media/dvb-core/dvb_demux.h
+
+Driver-internal low-level hardware specific driver demux interface
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/media/dvb-core/demux.h
diff --git a/Documentation/media/kapi/dtv-frontend.rst b/Documentation/media/kapi/dtv-frontend.rst
new file mode 100644
index 0000000..f1a2fda
--- /dev/null
+++ b/Documentation/media/kapi/dtv-frontend.rst
@@ -0,0 +1,443 @@
+Digital TV Frontend kABI
+------------------------
+
+Digital TV Frontend
+~~~~~~~~~~~~~~~~~~~
+
+The Digital TV Frontend kABI defines a driver-internal interface for
+registering low-level, hardware specific driver to a hardware independent
+frontend layer. It is only of interest for Digital TV device driver writers.
+The header file for this API is named ``dvb_frontend.h`` and located in
+``drivers/media/dvb-core``.
+
+Demodulator driver
+^^^^^^^^^^^^^^^^^^
+
+The demodulator driver is responsible to talk with the decoding part of the
+hardware. Such driver should implement :c:type:`dvb_frontend_ops`, with
+tells what type of digital TV standards are supported, and points to a
+series of functions that allow the DVB core to command the hardware via
+the code under ``drivers/media/dvb-core/dvb_frontend.c``.
+
+A typical example of such struct in a driver ``foo`` is::
+
+	static struct dvb_frontend_ops foo_ops = {
+		.delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
+		.info = {
+			.name	= "foo DVB-T/T2/C driver",
+			.caps = FE_CAN_FEC_1_2 |
+				FE_CAN_FEC_2_3 |
+				FE_CAN_FEC_3_4 |
+				FE_CAN_FEC_5_6 |
+				FE_CAN_FEC_7_8 |
+				FE_CAN_FEC_AUTO |
+				FE_CAN_QPSK |
+				FE_CAN_QAM_16 |
+				FE_CAN_QAM_32 |
+				FE_CAN_QAM_64 |
+				FE_CAN_QAM_128 |
+				FE_CAN_QAM_256 |
+				FE_CAN_QAM_AUTO |
+				FE_CAN_TRANSMISSION_MODE_AUTO |
+				FE_CAN_GUARD_INTERVAL_AUTO |
+				FE_CAN_HIERARCHY_AUTO |
+				FE_CAN_MUTE_TS |
+				FE_CAN_2G_MODULATION,
+			.frequency_min = 42000000, /* Hz */
+			.frequency_max = 1002000000, /* Hz */
+			.symbol_rate_min = 870000,
+			.symbol_rate_max = 11700000
+		},
+		.init = foo_init,
+		.sleep = foo_sleep,
+		.release = foo_release,
+		.set_frontend = foo_set_frontend,
+		.get_frontend = foo_get_frontend,
+		.read_status = foo_get_status_and_stats,
+		.tune = foo_tune,
+		.i2c_gate_ctrl = foo_i2c_gate_ctrl,
+		.get_frontend_algo = foo_get_algo,
+	};
+
+A typical example of such struct in a driver ``bar`` meant to be used on
+Satellite TV reception is::
+
+	static const struct dvb_frontend_ops bar_ops = {
+		.delsys = { SYS_DVBS, SYS_DVBS2 },
+		.info = {
+			.name		= "Bar DVB-S/S2 demodulator",
+			.frequency_min	= 500000, /* KHz */
+			.frequency_max	= 2500000, /* KHz */
+			.frequency_stepsize	= 0,
+			.symbol_rate_min = 1000000,
+			.symbol_rate_max = 45000000,
+			.symbol_rate_tolerance = 500,
+			.caps = FE_CAN_INVERSION_AUTO |
+				FE_CAN_FEC_AUTO |
+				FE_CAN_QPSK,
+		},
+		.init = bar_init,
+		.sleep = bar_sleep,
+		.release = bar_release,
+		.set_frontend = bar_set_frontend,
+		.get_frontend = bar_get_frontend,
+		.read_status = bar_get_status_and_stats,
+		.i2c_gate_ctrl = bar_i2c_gate_ctrl,
+		.get_frontend_algo = bar_get_algo,
+		.tune = bar_tune,
+
+		/* Satellite-specific */
+		.diseqc_send_master_cmd = bar_send_diseqc_msg,
+		.diseqc_send_burst = bar_send_burst,
+		.set_tone = bar_set_tone,
+		.set_voltage = bar_set_voltage,
+	};
+
+.. note::
+
+   #) For satellite digital TV standards (DVB-S, DVB-S2, ISDB-S), the
+      frequencies are specified in kHz, while, for terrestrial and cable
+      standards, they're specified in Hz. Due to that, if the same frontend
+      supports both types, you'll need to have two separate
+      :c:type:`dvb_frontend_ops` structures, one for each standard.
+   #) The ``.i2c_gate_ctrl`` field is present only when the hardware has
+      allows controlling an I2C gate (either directly of via some GPIO pin),
+      in order to remove the tuner from the I2C bus after a channel is
+      tuned.
+   #) All new drivers should implement the
+      :ref:`DVBv5 statistics <dvbv5_stats>` via ``.read_status``.
+      Yet, there are a number of callbacks meant to get statistics for
+      signal strength, S/N and UCB. Those are there to provide backward
+      compatibility with legacy applications that don't support the DVBv5
+      API. Implementing those callbacks are optional. Those callbacks may be
+      removed in the future, after we have all existing drivers supporting
+      DVBv5 stats.
+   #) Other callbacks are required for satellite TV standards, in order to
+      control LNBf and DiSEqC: ``.diseqc_send_master_cmd``,
+      ``.diseqc_send_burst``, ``.set_tone``, ``.set_voltage``.
+
+.. |delta|   unicode:: U+00394
+
+The ``drivers/media/dvb-core/dvb_frontend.c`` has a kernel thread with is
+responsible for tuning the device. It supports multiple algorithms to
+detect a channel, as defined at enum :c:func:`dvbfe_algo`.
+
+The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver
+doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to
+``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning,
+e. g. it will try first to use the specified center frequency ``f``,
+then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|,
+``f`` - 2 x |delta| and so on.
+
+If the hardware has internally a some sort of zigzag algorithm, you should
+define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``.
+
+.. note::
+
+   The core frontend support also supports
+   a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to
+   define its own hardware-assisted algorithm. Very few hardware need to
+   use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other
+   function callbacks at struct :c:type:`dvb_frontend_ops`.
+
+Attaching frontend driver to the bridge driver
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Before using the Digital TV frontend core, the bridge driver should attach
+the frontend demod, tuner and SEC devices and call
+:c:func:`dvb_register_frontend()`,
+in order to register the new frontend at the subsystem. At device
+detach/removal, the bridge driver should call
+:c:func:`dvb_unregister_frontend()` to
+remove the frontend from the core and then :c:func:`dvb_frontend_detach()`
+to free the memory allocated by the frontend drivers.
+
+The drivers should also call :c:func:`dvb_frontend_suspend()` as part of
+their handler for the :c:type:`device_driver`.\ ``suspend()``, and
+:c:func:`dvb_frontend_resume()` as
+part of their handler for :c:type:`device_driver`.\ ``resume()``.
+
+A few other optional functions are provided to handle some special cases.
+
+.. _dvbv5_stats:
+
+Digital TV Frontend statistics
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Introduction
+^^^^^^^^^^^^
+
+Digital TV frontends provide a range of
+:ref:`statistics <frontend-stat-properties>` meant to help tuning the device
+and measuring the quality of service.
+
+For each statistics measurement, the driver should set the type of scale used,
+or ``FE_SCALE_NOT_AVAILABLE`` if the statistics is not available on a given
+time. Drivers should also provide the number of statistics for each type.
+that's usually 1 for most video standards [#f2]_.
+
+Drivers should initialize each statistic counters with length and
+scale at its init code. For example, if the frontend provides signal
+strength, it should have, on its init code::
+
+	struct dtv_frontend_properties *c = &state->fe.dtv_property_cache;
+
+	c->strength.len = 1;
+	c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+
+And, when the statistics got updated, set the scale::
+
+	c->strength.stat[0].scale = FE_SCALE_DECIBEL;
+	c->strength.stat[0].uvalue = strength;
+
+.. [#f2] For ISDB-T, it may provide both a global statistics and a per-layer
+   set of statistics. On such cases, len should be equal to 4. The first
+   value corresponds to the global stat; the other ones to each layer, e. g.:
+
+   - c->cnr.stat[0] for global S/N carrier ratio,
+   - c->cnr.stat[1] for Layer A S/N carrier ratio,
+   - c->cnr.stat[2] for layer B S/N carrier ratio,
+   - c->cnr.stat[3] for layer C S/N carrier ratio.
+
+.. note:: Please prefer to use ``FE_SCALE_DECIBEL`` instead of
+   ``FE_SCALE_RELATIVE`` for signal strength and CNR measurements.
+
+Groups of statistics
+^^^^^^^^^^^^^^^^^^^^
+
+There are several groups of statistics currently supported:
+
+Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`)
+  - Measures the signal strength level at the analog part of the tuner or
+    demod.
+
+  - Typically obtained from the gain applied to the tuner and/or frontend
+    in order to detect the carrier. When no carrier is detected, the gain is
+    at the maximum value (so, strength is on its minimal).
+
+  - As the gain is visible through the set of registers that adjust the gain,
+    typically, this statistics is always available [#f3]_.
+
+  - Drivers should try to make it available all the times, as this statistics
+    can be used when adjusting an antenna position and to check for troubles
+    at the cabling.
+
+  .. [#f3] On a few devices, the gain keeps floating if no carrier.
+     On such devices, strength report should check first if carrier is
+     detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`),
+     and otherwise return the lowest possible value.
+
+Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`)
+  - Signal to Noise ratio for the main carrier.
+
+  - Signal to Noise measurement depends on the device. On some hardware, is
+    available when the main carrier is detected. On those hardware, CNR
+    measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``,
+    see :c:type:`fe_status`).
+
+    On other devices, it requires inner FEC decoding,
+    as the frontend measures it indirectly from other parameters (e. g. after
+    ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
+
+    Having it available after inner FEC is more common.
+
+Bit counts post-FEC (:ref:`DTV-STAT-POST-ERROR-BIT-COUNT` and :ref:`DTV-STAT-POST-TOTAL-BIT-COUNT`)
+  - Those counters measure the number of bits and bit errors errors after
+    the forward error correction (FEC) on the inner coding block
+    (after Viterbi, LDPC or other inner code).
+
+  - Due to its nature, those statistics depend on full coding lock
+    (e. g. after ``FE_HAS_SYNC`` or after ``FE_HAS_LOCK``,
+    see :c:type:`fe_status`).
+
+Bit counts pre-FEC (:ref:`DTV-STAT-PRE-ERROR-BIT-COUNT` and :ref:`DTV-STAT-PRE-TOTAL-BIT-COUNT`)
+  - Those counters measure the number of bits and bit errors errors before
+    the forward error correction (FEC) on the inner coding block
+    (before Viterbi, LDPC or other inner code).
+
+  - Not all frontends provide this kind of statistics.
+
+  - Due to its nature, those statistics depend on inner coding lock (e. g.
+    after ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
+
+Block counts (:ref:`DTV-STAT-ERROR-BLOCK-COUNT` and :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`)
+  - Those counters measure the number of blocks and block errors errors after
+    the forward error correction (FEC) on the inner coding block
+    (before Viterbi, LDPC or other inner code).
+
+  - Due to its nature, those statistics depend on full coding lock
+    (e. g. after ``FE_HAS_SYNC`` or after
+    ``FE_HAS_LOCK``, see :c:type:`fe_status`).
+
+.. note:: All counters should be monotonically increased as they're
+   collected from the hardware.
+
+A typical example of the logic that handle status and statistics is::
+
+	static int foo_get_status_and_stats(struct dvb_frontend *fe)
+	{
+		struct foo_state *state = fe->demodulator_priv;
+		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+		int rc;
+		enum fe_status *status;
+
+		/* Both status and strength are always available */
+		rc = foo_read_status(fe, &status);
+		if (rc < 0)
+			return rc;
+
+		rc = foo_read_strength(fe);
+		if (rc < 0)
+			return rc;
+
+		/* Check if CNR is available */
+		if (!(fe->status & FE_HAS_CARRIER))
+			return 0;
+
+		rc = foo_read_cnr(fe);
+		if (rc < 0)
+			return rc;
+
+		/* Check if pre-BER stats are available */
+		if (!(fe->status & FE_HAS_VITERBI))
+			return 0;
+
+		rc = foo_get_pre_ber(fe);
+		if (rc < 0)
+			return rc;
+
+		/* Check if post-BER stats are available */
+		if (!(fe->status & FE_HAS_SYNC))
+			return 0;
+
+		rc = foo_get_post_ber(fe);
+		if (rc < 0)
+			return rc;
+	}
+
+	static const struct dvb_frontend_ops ops = {
+		/* ... */
+		.read_status = foo_get_status_and_stats,
+	};
+
+Statistics collect
+^^^^^^^^^^^^^^^^^^
+
+On almost all frontend hardware, the bit and byte counts are stored by
+the hardware after a certain amount of time or after the total bit/block
+counter reaches a certain value (usually programable), for example, on
+every 1000 ms or after receiving 1,000,000 bits.
+
+So, if you read the registers too soon, you'll end by reading the same
+value as in the previous reading, causing the monotonic value to be
+incremented too often.
+
+Drivers should take the responsibility to avoid too often reads. That
+can be done using two approaches:
+
+if the driver have a bit that indicates when a collected data is ready
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+Driver should check such bit before making the statistics available.
+
+An example of such behavior can be found at this code snippet (adapted
+from mb86a20s driver's logic)::
+
+	static int foo_get_pre_ber(struct dvb_frontend *fe)
+	{
+		struct foo_state *state = fe->demodulator_priv;
+		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+		int rc, bit_error;
+
+		/* Check if the BER measures are already available */
+		rc = foo_read_u8(state, 0x54);
+		if (rc < 0)
+			return rc;
+
+		if (!rc)
+			return 0;
+
+		/* Read Bit Error Count */
+		bit_error = foo_read_u32(state, 0x55);
+		if (bit_error < 0)
+			return bit_error;
+
+		/* Read Total Bit Count */
+		rc = foo_read_u32(state, 0x51);
+		if (rc < 0)
+			return rc;
+
+		c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_error.stat[0].uvalue += bit_error;
+		c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_count.stat[0].uvalue += rc;
+
+		return 0;
+	}
+
+If the driver doesn't provide a statistics available check bit
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+A few devices, however, may not provide a way to check if the stats are
+available (or the way to check it is unknown). They may not even provide
+a way to directly read the total number of bits or blocks.
+
+On those devices, the driver need to ensure that it won't be reading from
+the register too often and/or estimate the total number of bits/blocks.
+
+On such drivers, a typical routine to get statistics would be like
+(adapted from dib8000 driver's logic)::
+
+	struct foo_state {
+		/* ... */
+
+		unsigned long per_jiffies_stats;
+	}
+
+	static int foo_get_pre_ber(struct dvb_frontend *fe)
+	{
+		struct foo_state *state = fe->demodulator_priv;
+		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+		int rc, bit_error;
+		u64 bits;
+
+		/* Check if time for stats was elapsed */
+		if (!time_after(jiffies, state->per_jiffies_stats))
+			return 0;
+
+		/* Next stat should be collected in 1000 ms */
+		state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000);
+
+		/* Read Bit Error Count */
+		bit_error = foo_read_u32(state, 0x55);
+		if (bit_error < 0)
+			return bit_error;
+
+		/*
+		 * On this particular frontend, there's no register that
+		 * would provide the number of bits per 1000ms sample. So,
+		 * some function would calculate it based on DTV properties
+		 */
+		bits = get_number_of_bits_per_1000ms(fe);
+
+		c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_error.stat[0].uvalue += bit_error;
+		c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_count.stat[0].uvalue += bits;
+
+		return 0;
+	}
+
+Please notice that, on both cases, we're getting the statistics using the
+:c:type:`dvb_frontend_ops` ``.read_status`` callback. The rationale is that
+the frontend core will automatically call this function periodically
+(usually, 3 times per second, when the frontend is locked).
+
+That warrants that we won't miss to collect a counter and increment the
+monotonic stats at the right time.
+
+Digital TV Frontend functions and types
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/media/dvb-core/dvb_frontend.h
diff --git a/Documentation/media/kapi/dtv-net.rst b/Documentation/media/kapi/dtv-net.rst
new file mode 100644
index 0000000..ced991b
--- /dev/null
+++ b/Documentation/media/kapi/dtv-net.rst
@@ -0,0 +1,4 @@
+Digital TV Network kABI
+-----------------------
+
+.. kernel-doc:: drivers/media/dvb-core/dvb_net.h
diff --git a/Documentation/media/kapi/v4l2-async.rst b/Documentation/media/kapi/v4l2-async.rst
new file mode 100644
index 0000000..523ff9e
--- /dev/null
+++ b/Documentation/media/kapi/v4l2-async.rst
@@ -0,0 +1,3 @@
+V4L2 async kAPI
+^^^^^^^^^^^^^^^
+.. kernel-doc:: include/media/v4l2-async.h
diff --git a/Documentation/media/kapi/v4l2-core.rst b/Documentation/media/kapi/v4l2-core.rst
index c7434f3..5cf2920 100644
--- a/Documentation/media/kapi/v4l2-core.rst
+++ b/Documentation/media/kapi/v4l2-core.rst
@@ -19,6 +19,7 @@ Video4Linux devices
     v4l2-mc
     v4l2-mediabus
     v4l2-mem2mem
+    v4l2-async
     v4l2-fwnode
     v4l2-rect
     v4l2-tuner
diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
index a5c8218..b6fd864 100644
--- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
@@ -161,6 +161,24 @@ it is guaranteed that the state did change in between the two events.
       - Generated if the CEC pin goes from a low voltage to a high voltage.
         Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
 	capability set.
+    * .. _`CEC-EVENT-PIN-HPD-LOW`:
+
+      - ``CEC_EVENT_PIN_HPD_LOW``
+      - 5
+      - Generated if the HPD pin goes from a high voltage to a low voltage.
+	Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
+	capability set. When open() is called, the HPD pin can be read and
+	if the HPD is low, then an initial event will be generated for that
+	filehandle.
+    * .. _`CEC-EVENT-PIN-HPD-HIGH`:
+
+      - ``CEC_EVENT_PIN_HPD_HIGH``
+      - 6
+      - Generated if the HPD pin goes from a low voltage to a high voltage.
+	Only applies to adapters that have the ``CEC_CAP_MONITOR_PIN``
+	capability set. When open() is called, the HPD pin can be read and
+	if the HPD is high, then an initial event will be generated for that
+	filehandle.
 
 
 .. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}|
@@ -172,9 +190,9 @@ it is guaranteed that the state did change in between the two events.
     :stub-columns: 0
     :widths:       3 1 8
 
-    * .. _`CEC-EVENT-FL-INITIAL-VALUE`:
+    * .. _`CEC-EVENT-FL-INITIAL-STATE`:
 
-      - ``CEC_EVENT_FL_INITIAL_VALUE``
+      - ``CEC_EVENT_FL_INITIAL_STATE``
       - 1
       - Set for the initial events that are generated when the device is
 	opened. See the table above for which events do this. This allows
diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst
index 0f397c5..bdad4b1 100644
--- a/Documentation/media/uapi/cec/cec-ioc-receive.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst
@@ -131,7 +131,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
       - ``tx_status``
       - The status bits of the transmitted message. See
 	:ref:`cec-tx-status` for the possible status values. It is 0 if
-	this messages was received, not transmitted.
+	this message was received, not transmitted.
     * - __u8
       - ``msg[16]``
       - The message payload. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in by the
@@ -168,7 +168,7 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
       - ``tx_status``
       - The status bits of the transmitted message. See
 	:ref:`cec-tx-status` for the possible status values. It is 0 if
-	this messages was received, not transmitted.
+	this message was received, not transmitted.
     * - __u8
       - ``tx_arb_lost_cnt``
       - A counter of the number of transmit attempts that resulted in the
@@ -256,9 +256,9 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
       - ``CEC_TX_STATUS_ERROR``
       - 0x10
       - Some error occurred. This is used for any errors that do not fit
-	the previous two, either because the hardware could not tell which
-	error occurred, or because the hardware tested for other
-	conditions besides those two.
+	``CEC_TX_STATUS_ARB_LOST`` or ``CEC_TX_STATUS_LOW_DRIVE``, either because
+	the hardware could not tell which error occurred, or because the hardware
+	tested for other conditions besides those two.
     * .. _`CEC-TX-STATUS-MAX-RETRIES`:
 
       - ``CEC_TX_STATUS_MAX_RETRIES``
diff --git a/Documentation/media/uapi/dvb/examples.rst b/Documentation/media/uapi/dvb/examples.rst
index e0f627c..16dd90f 100644
--- a/Documentation/media/uapi/dvb/examples.rst
+++ b/Documentation/media/uapi/dvb/examples.rst
@@ -6,377 +6,11 @@
 Examples
 ********
 
-In this section we would like to present some examples for using the Digital
-TV API.
+In the past, we used to have a set of examples here. However, those
+examples got out of date and doesn't even compile nowadays.
 
-.. note::
+Also, nowadays, the best is to use the libdvbv5 DVB API nowadays,
+with is fully documented.
 
-   This section is out of date, and the code below won't even
-   compile. Please refer to the
-   `libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__ for
-   updated/recommended examples.
-
-
-.. _tuning:
-
-Example: Tuning
-===============
-
-We will start with a generic tuning subroutine that uses the frontend
-and SEC, as well as the demux devices. The example is given for QPSK
-tuners, but can easily be adjusted for QAM.
-
-
-.. code-block:: c
-
-     #include <sys/ioctl.h>
-     #include <stdio.h>
-     #include <stdint.h>
-     #include <sys/types.h>
-     #include <sys/stat.h>
-     #include <fcntl.h>
-     #include <time.h>
-     #include <unistd.h>
-
-     #include <linux/dvb/dmx.h>
-     #include <linux/dvb/frontend.h>
-     #include <linux/dvb/sec.h>
-     #include <sys/poll.h>
-
-     #define DMX "/dev/dvb/adapter0/demux1"
-     #define FRONT "/dev/dvb/adapter0/frontend1"
-     #define SEC "/dev/dvb/adapter0/sec1"
-
-     /* routine for checking if we have a signal and other status information*/
-     int FEReadStatus(int fd, fe_status_t *stat)
-     {
-	 int ans;
-
-	 if ( (ans = ioctl(fd,FE_READ_STATUS,stat) < 0)){
-	     perror("FE READ STATUS: ");
-	     return -1;
-	 }
-
-	 if (*stat & FE_HAS_POWER)
-	     printf("FE HAS POWER\\n");
-
-	 if (*stat & FE_HAS_SIGNAL)
-	     printf("FE HAS SIGNAL\\n");
-
-	 if (*stat & FE_SPECTRUM_INV)
-	     printf("SPEKTRUM INV\\n");
-
-	 return 0;
-     }
-
-
-     /* tune qpsk */
-     /* freq:             frequency of transponder                      */
-     /* vpid, apid, tpid: PIDs of video, audio and teletext TS packets  */
-     /* diseqc:           DiSEqC address of the used LNB                */
-     /* pol:              Polarisation                                  */
-     /* srate:            Symbol Rate                                   */
-     /* fec.              FEC                                           */
-     /* lnb_lof1:         local frequency of lower LNB band             */
-     /* lnb_lof2:         local frequency of upper LNB band             */
-     /* lnb_slof:         switch frequency of LNB                       */
-
-     int set_qpsk_channel(int freq, int vpid, int apid, int tpid,
-	     int diseqc, int pol, int srate, int fec, int lnb_lof1,
-	     int lnb_lof2, int lnb_slof)
-     {
-	 struct secCommand scmd;
-	 struct secCmdSequence scmds;
-	 struct dmx_pes_filter_params pesFilterParams;
-	 FrontendParameters frp;
-	 struct pollfd pfd[1];
-	 FrontendEvent event;
-	 int demux1, demux2, demux3, front;
-
-	 frequency = (uint32_t) freq;
-	 symbolrate = (uint32_t) srate;
-
-	 if((front = open(FRONT,O_RDWR)) < 0){
-	     perror("FRONTEND DEVICE: ");
-	     return -1;
-	 }
-
-	 if((sec = open(SEC,O_RDWR)) < 0){
-	     perror("SEC DEVICE: ");
-	     return -1;
-	 }
-
-	 if (demux1 < 0){
-	     if ((demux1=open(DMX, O_RDWR|O_NONBLOCK))
-		 < 0){
-		 perror("DEMUX DEVICE: ");
-		 return -1;
-	     }
-	 }
-
-	 if (demux2 < 0){
-	     if ((demux2=open(DMX, O_RDWR|O_NONBLOCK))
-		 < 0){
-		 perror("DEMUX DEVICE: ");
-		 return -1;
-	     }
-	 }
-
-	 if (demux3 < 0){
-	     if ((demux3=open(DMX, O_RDWR|O_NONBLOCK))
-		 < 0){
-		 perror("DEMUX DEVICE: ");
-		 return -1;
-	     }
-	 }
-
-	 if (freq < lnb_slof) {
-	     frp.Frequency = (freq - lnb_lof1);
-	     scmds.continuousTone = SEC_TONE_OFF;
-	 } else {
-	     frp.Frequency = (freq - lnb_lof2);
-	     scmds.continuousTone = SEC_TONE_ON;
-	 }
-	 frp.Inversion = INVERSION_AUTO;
-	 if (pol) scmds.voltage = SEC_VOLTAGE_18;
-	 else scmds.voltage = SEC_VOLTAGE_13;
-
-	 scmd.type=0;
-	 scmd.u.diseqc.addr=0x10;
-	 scmd.u.diseqc.cmd=0x38;
-	 scmd.u.diseqc.numParams=1;
-	 scmd.u.diseqc.params[0] = 0xF0 | ((diseqc * 4) & 0x0F) |
-	     (scmds.continuousTone == SEC_TONE_ON ? 1 : 0) |
-	     (scmds.voltage==SEC_VOLTAGE_18 ? 2 : 0);
-
-	 scmds.miniCommand=SEC_MINI_NONE;
-	 scmds.numCommands=1;
-	 scmds.commands=&scmd;
-	 if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){
-	     perror("SEC SEND: ");
-	     return -1;
-	 }
-
-	 if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){
-	     perror("SEC SEND: ");
-	     return -1;
-	 }
-
-	 frp.u.qpsk.SymbolRate = srate;
-	 frp.u.qpsk.FEC_inner = fec;
-
-	 if (ioctl(front, FE_SET_FRONTEND, &frp) < 0){
-	     perror("QPSK TUNE: ");
-	     return -1;
-	 }
-
-	 pfd[0].fd = front;
-	 pfd[0].events = POLLIN;
-
-	 if (poll(pfd,1,3000)){
-	     if (pfd[0].revents & POLLIN){
-		 printf("Getting QPSK event\\n");
-		 if ( ioctl(front, FE_GET_EVENT, &event)
-
-		      == -EOVERFLOW){
-		     perror("qpsk get event");
-		     return -1;
-		 }
-		 printf("Received ");
-		 switch(event.type){
-		 case FE_UNEXPECTED_EV:
-		     printf("unexpected event\\n");
-		     return -1;
-		 case FE_FAILURE_EV:
-		     printf("failure event\\n");
-		     return -1;
-
-		 case FE_COMPLETION_EV:
-		     printf("completion event\\n");
-		 }
-	     }
-	 }
-
-
-	 pesFilterParams.pid     = vpid;
-	 pesFilterParams.input   = DMX_IN_FRONTEND;
-	 pesFilterParams.output  = DMX_OUT_DECODER;
-	 pesFilterParams.pes_type = DMX_PES_VIDEO;
-	 pesFilterParams.flags   = DMX_IMMEDIATE_START;
-	 if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-	     perror("set_vpid");
-	     return -1;
-	 }
-
-	 pesFilterParams.pid     = apid;
-	 pesFilterParams.input   = DMX_IN_FRONTEND;
-	 pesFilterParams.output  = DMX_OUT_DECODER;
-	 pesFilterParams.pes_type = DMX_PES_AUDIO;
-	 pesFilterParams.flags   = DMX_IMMEDIATE_START;
-	 if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-	     perror("set_apid");
-	     return -1;
-	 }
-
-	 pesFilterParams.pid     = tpid;
-	 pesFilterParams.input   = DMX_IN_FRONTEND;
-	 pesFilterParams.output  = DMX_OUT_DECODER;
-	 pesFilterParams.pes_type = DMX_PES_TELETEXT;
-	 pesFilterParams.flags   = DMX_IMMEDIATE_START;
-	 if (ioctl(demux3, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-	     perror("set_tpid");
-	     return -1;
-	 }
-
-	 return has_signal(fds);
-     }
-
-The program assumes that you are using a universal LNB and a standard
-DiSEqC switch with up to 4 addresses. Of course, you could build in some
-more checking if tuning was successful and maybe try to repeat the
-tuning process. Depending on the external hardware, i.e. LNB and DiSEqC
-switch, and weather conditions this may be necessary.
-
-
-.. _the_dvr_device:
-
-Example: The DVR device
-========================
-
-The following program code shows how to use the DVR device for
-recording.
-
-
-.. code-block:: c
-
-     #include <sys/ioctl.h>
-     #include <stdio.h>
-     #include <stdint.h>
-     #include <sys/types.h>
-     #include <sys/stat.h>
-     #include <fcntl.h>
-     #include <time.h>
-     #include <unistd.h>
-
-     #include <linux/dvb/dmx.h>
-     #include <linux/dvb/video.h>
-     #include <sys/poll.h>
-     #define DVR "/dev/dvb/adapter0/dvr1"
-     #define AUDIO "/dev/dvb/adapter0/audio1"
-     #define VIDEO "/dev/dvb/adapter0/video1"
-
-     #define BUFFY (188*20)
-     #define MAX_LENGTH (1024*1024*5) /* record 5MB */
-
-
-     /* switch the demuxes to recording, assuming the transponder is tuned */
-
-     /* demux1, demux2: file descriptor of video and audio filters */
-     /* vpid, apid:     PIDs of video and audio channels           */
-
-     int switch_to_record(int demux1, int demux2, uint16_t vpid, uint16_t apid)
-     {
-	 struct dmx_pes_filter_params pesFilterParams;
-
-	 if (demux1 < 0){
-	     if ((demux1=open(DMX, O_RDWR|O_NONBLOCK))
-		 < 0){
-		 perror("DEMUX DEVICE: ");
-		 return -1;
-	     }
-	 }
-
-	 if (demux2 < 0){
-	     if ((demux2=open(DMX, O_RDWR|O_NONBLOCK))
-		 < 0){
-		 perror("DEMUX DEVICE: ");
-		 return -1;
-	     }
-	 }
-
-	 pesFilterParams.pid = vpid;
-	 pesFilterParams.input = DMX_IN_FRONTEND;
-	 pesFilterParams.output = DMX_OUT_TS_TAP;
-	 pesFilterParams.pes_type = DMX_PES_VIDEO;
-	 pesFilterParams.flags = DMX_IMMEDIATE_START;
-	 if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-	     perror("DEMUX DEVICE");
-	     return -1;
-	 }
-	 pesFilterParams.pid = apid;
-	 pesFilterParams.input = DMX_IN_FRONTEND;
-	 pesFilterParams.output = DMX_OUT_TS_TAP;
-	 pesFilterParams.pes_type = DMX_PES_AUDIO;
-	 pesFilterParams.flags = DMX_IMMEDIATE_START;
-	 if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
-	     perror("DEMUX DEVICE");
-	     return -1;
-	 }
-	 return 0;
-     }
-
-     /* start recording MAX_LENGTH , assuming the transponder is tuned */
-
-     /* demux1, demux2: file descriptor of video and audio filters */
-     /* vpid, apid:     PIDs of video and audio channels           */
-     int record_dvr(int demux1, int demux2, uint16_t vpid, uint16_t apid)
-     {
-	 int i;
-	 int len;
-	 int written;
-	 uint8_t buf[BUFFY];
-	 uint64_t length;
-	 struct pollfd pfd[1];
-	 int dvr, dvr_out;
-
-	 /* open dvr device */
-	 if ((dvr = open(DVR, O_RDONLY|O_NONBLOCK)) < 0){
-		 perror("DVR DEVICE");
-		 return -1;
-	 }
-
-	 /* switch video and audio demuxes to dvr */
-	 printf ("Switching dvr on\\n");
-	 i = switch_to_record(demux1, demux2, vpid, apid);
-	 printf("finished: ");
-
-	 printf("Recording %2.0f MB of test file in TS format\\n",
-	    MAX_LENGTH/(1024.0*1024.0));
-	 length = 0;
-
-	 /* open output file */
-	 if ((dvr_out = open(DVR_FILE,O_WRONLY|O_CREAT
-		      |O_TRUNC, S_IRUSR|S_IWUSR
-		      |S_IRGRP|S_IWGRP|S_IROTH|
-		      S_IWOTH)) < 0){
-	     perror("Can't open file for dvr test");
-	     return -1;
-	 }
-
-	 pfd[0].fd = dvr;
-	 pfd[0].events = POLLIN;
-
-	 /* poll for dvr data and write to file */
-	 while (length < MAX_LENGTH ) {
-	     if (poll(pfd,1,1)){
-		 if (pfd[0].revents & POLLIN){
-		     len = read(dvr, buf, BUFFY);
-		     if (len < 0){
-			 perror("recording");
-			 return -1;
-		     }
-		     if (len > 0){
-			 written = 0;
-			 while (written < len)
-			     written +=
-				 write (dvr_out,
-				    buf, len);
-			 length += len;
-			 printf("written %2.0f MB\\r",
-			    length/1024./1024.);
-		     }
-		 }
-	     }
-	 }
-	 return 0;
-     }
+Please refer to the `libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__
+for updated/recommended examples.
diff --git a/Documentation/media/uapi/dvb/fe-get-property.rst b/Documentation/media/uapi/dvb/fe-get-property.rst
index 948d2ba..b69741d 100644
--- a/Documentation/media/uapi/dvb/fe-get-property.rst
+++ b/Documentation/media/uapi/dvb/fe-get-property.rst
@@ -48,8 +48,11 @@ depends on the delivery system and on the device:
 
    -  This call requires read/write access to the device.
 
-   -  At return, the values are updated to reflect the actual parameters
-      used.
+.. note::
+
+   At return, the values aren't updated to reflect the actual
+   parameters used. If the actual parameters are needed, an explicit
+   call to ``FE_GET_PROPERTY`` is needed.
 
 -  ``FE_GET_PROPERTY:``
 
diff --git a/Documentation/media/uapi/dvb/net-types.rst b/Documentation/media/uapi/dvb/net-types.rst
index e1177bd..8fa3292 100644
--- a/Documentation/media/uapi/dvb/net-types.rst
+++ b/Documentation/media/uapi/dvb/net-types.rst
@@ -1,6 +1,6 @@
 .. -*- coding: utf-8; mode: rst -*-
 
-.. _dmx_types:
+.. _net_types:
 
 **************
 Net Data Types