summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-08-02 11:50:24 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-08-02 11:50:24 -0700
commit44d82e2963551eafa378a3fc7a923df7853af4e2 (patch)
treecfa6be7fda5a455ef93f0c00f3134287e4dc1bbd /Documentation
parentbfdf85dfce1f203f8fcca034b8efe339542033fa (diff)
parent15a1e1bafe2c924db6d370ad892d7da6c7d83598 (diff)
downloadop-kernel-dev-44d82e2963551eafa378a3fc7a923df7853af4e2.zip
op-kernel-dev-44d82e2963551eafa378a3fc7a923df7853af4e2.tar.gz
Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arm/mrvl/intc.txt20
-rw-r--r--Documentation/devicetree/bindings/ata/marvell.txt16
-rw-r--r--Documentation/devicetree/bindings/gpio/mrvl-gpio.txt23
-rw-r--r--Documentation/devicetree/bindings/watchdog/marvel.txt14
4 files changed, 73 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
index 80b9a94..8b53273 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/intc.txt
+++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
@@ -38,3 +38,23 @@ Example:
reg-names = "mux status", "mux mask";
mrvl,intc-nr-irqs = <2>;
};
+
+* Marvell Orion Interrupt controller
+
+Required properties
+- compatible : Should be "marvell,orion-intc".
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. Supported value is <1>.
+- interrupt-controller : Declare this node to be an interrupt controller.
+- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
+ One entry in the list represents 32 interrupts.
+
+Example:
+
+ intc: interrupt-controller {
+ compatible = "marvell,orion-intc", "marvell,intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xfed20204 0x04>,
+ <0xfed20214 0x04>;
+ };
diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt
new file mode 100644
index 0000000..b5cdd20
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/marvell.txt
@@ -0,0 +1,16 @@
+* Marvell Orion SATA
+
+Required Properties:
+- compatibility : "marvell,orion-sata"
+- reg : Address range of controller
+- interrupts : Interrupt controller is using
+- nr-ports : Number of SATA ports in use.
+
+Example:
+
+ sata@80000 {
+ compatible = "marvell,orion-sata";
+ reg = <0x80000 0x5000>;
+ interrupts = <21>;
+ nr-ports = <2>;
+ }
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index 05428f3..e137874 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -27,3 +27,26 @@ Example:
interrupt-controller;
#interrupt-cells = <1>;
};
+
+* Marvell Orion GPIO Controller
+
+Required properties:
+- compatible : Should be "marvell,orion-gpio"
+- reg : Address and length of the register set for controller.
+- gpio-controller : So we know this is a gpio controller.
+- ngpio : How many gpios this controller has.
+- interrupts : Up to 4 Interrupts for the controller.
+
+Optional properties:
+- mask-offset : For SMP Orions, offset for Nth CPU
+
+Example:
+
+ gpio0: gpio@10100 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0x10100 0x40>;
+ ngpio = <32>;
+ interrupts = <35>, <36>, <37>, <38>;
+ };
diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
new file mode 100644
index 0000000..0b2503a
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
@@ -0,0 +1,14 @@
+* Marvell Orion Watchdog Time
+
+Required Properties:
+
+- Compatibility : "marvell,orion-wdt"
+- reg : Address of the timer registers
+
+Example:
+
+ wdt@20300 {
+ compatible = "marvell,orion-wdt";
+ reg = <0x20300 0x28>;
+ status = "okay";
+ };
OpenPOWER on IntegriCloud