Merge tag 'phy-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-testing

Kishon writes:

phy: for 4.6

*) Add driver for rockchip Display Port PHY
*) Add driver for the Rockchip SoC internal eMMC PHY
*) Add usb-uart functionality in rockchip-usb
*) cleanup rcar usb2 PHY driver
*) Fix for randconfig error

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

4 files changed, 51 insertions, 11 deletions

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index 2390e4e..eaf7e9b 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -7,33 +7,26 @@ Required properties:
 - compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
 	      SoC.
 - reg: offset and length of the partial USB 2.0 Host register block.
-- reg-names: must be "usb2_host".
 - clocks: clock phandle and specifier pair(s).
 - #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
 
 Optional properties:
 To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
-combined, the device tree node should set HSUSB properties to reg and reg-names
-properties. This is because HSUSB has registers to select USB 2.0 host or
-peripheral at that channel:
-- reg: offset and length of the partial HSUSB register block.
-- reg-names: must be "hsusb".
+combined, the device tree node should set interrupt properties to use the
+channel as USB OTG:
 - interrupts: interrupt specifier for the PHY.
 
 Example (R-Car H3):
 
 	usb-phy@ee080200 {
 		compatible = "renesas,usb2-phy-r8a7795";
-		reg = <0 0xee080200 0 0x700>, <0 0xe6590100 0 0x100>;
-		reg-names = "usb2_host", "hsusb";
+		reg = <0 0xee080200 0 0x700>;
 		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>,
-			 <&mstp7_clks R8A7795_CLK_HSUSB>;
+		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
 	};
 
 	usb-phy@ee0a0200 {
 		compatible = "renesas,usb2-phy-r8a7795";
 		reg = <0 0xee0a0200 0 0x700>;
-		reg-names = "usb2_host";
 		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
 	};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
new file mode 100644
index 0000000..50c4f9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
@@ -0,0 +1,22 @@
+Rockchip specific extensions to the Analogix Display Port PHY
+------------------------------------
+
+Required properties:
+- compatible : should be one of the following supported values:
+	 - "rockchip.rk3288-dp-phy"
+- clocks: from common clock binding: handle to dp clock.
+	of memory mapped region.
+- clock-names: from common clock binding:
+	Required elements: "24m"
+- rockchip,grf: phandle to the syscon managing the "general register files"
+- #phy-cells : from the generic PHY bindings, must be 0;
+
+Example:
+
+edp_phy: edp-phy {
+	compatible = "rockchip,rk3288-dp-phy";
+	rockchip,grf = <&grf>;
+	clocks = <&cru SCLK_EDP_24M>;
+	clock-names = "24m";
+	#phy-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
new file mode 100644
index 0000000..61916f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
@@ -0,0 +1,19 @@
+Rockchip EMMC PHY
+-----------------------
+
+Required properties:
+ - compatible: rockchip,rk3399-emmc-phy
+ - rockchip,grf : phandle to the syscon managing the "general
+   register files"
+ - #phy-cells: must be 0
+ - reg: PHY configure reg address offset in "general
+   register files"
+
+Example:
+
+emmcphy: phy {
+	compatible = "rockchip,rk3399-emmc-phy";
+	rockchip,grf = <&grf>;
+	reg = <0xf780>;
+	#phy-cells = <0>;
+};
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9a53c92..8a6c6c0 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3491,6 +3491,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	ro		[KNL] Mount root device read-only on boot
 
+	rockchip.usb_uart
+			Enable the uart passthrough on the designated usb port
+			on Rockchip SoCs. When active, the signals of the
+			debug-uart get routed to the D+ and D- pins of the usb
+			port and the regular usb controller gets disabled.
+
 	root=		[KNL] Root filesystem
 			See name_to_dev_t comment in init/do_mounts.c.