Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits)
  macvlan: fix panic if lowerdev in a bond
  tg3: Add braces around 5906 workaround.
  tg3: Fix NETIF_F_LOOPBACK error
  macvlan: remove one synchronize_rcu() call
  networking: NET_CLS_ROUTE4 depends on INET
  irda: Fix error propagation in ircomm_lmp_connect_response()
  irda: Kill set but unused variable 'bytes' in irlan_check_command_param()
  irda: Kill set but unused variable 'clen' in ircomm_connect_indication()
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport()
  be2net: Kill set but unused variable 'req' in lancer_fw_download()
  irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication()
  atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined.
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer().
  rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window()
  pkt_sched: Kill set but unused variable 'protocol' in tc_classify()
  isdn: capi: Use pr_debug() instead of ifdefs.
  tg3: Update version to 3.119
  tg3: Apply rx_discards fix to 5719/5720
  ...

Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c
as per Davem.

6 files changed, 77 insertions, 44 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-bcma b/Documentation/ABI/testing/sysfs-bus-bcma
new file mode 100644
index 0000000..06b62ba
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-bcma
@@ -0,0 +1,31 @@
+What:		/sys/bus/bcma/devices/.../manuf
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core has it's manufacturer id. See
+		include/linux/bcma/bcma.h for possible values.
+
+What:		/sys/bus/bcma/devices/.../id
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		There are a few types of BCMA cores, they can be identified by
+		id field.
+
+What:		/sys/bus/bcma/devices/.../rev
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		BCMA cores of the same type can still slightly differ depending
+		on their revision. Use it for detailed programming.
+
+What:		/sys/bus/bcma/devices/.../class
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core is identified by few fields, including class it
+		belongs to. See include/linux/bcma/bcma.h for possible values.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index f6a24e8..4cba260 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -35,17 +35,6 @@ Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
 
 ---------------------------
 
-What:	AR9170USB
-When:	2.6.40
-
-Why:	This driver is deprecated and the firmware is no longer
-	maintained. The replacement driver "carl9170" has been
-	around for a while, so the devices are still supported.
-
-Who:	Christian Lamparter <chunkeey@googlemail.com>
-
----------------------------
-
 What:	IRQF_SAMPLE_RANDOM
 Check:	IRQF_SAMPLE_RANDOM
 When:	July 2009
@@ -405,16 +394,6 @@ Who: 	anybody or Florian Mickler <florian@mickler.org>
 
 ----------------------------
 
-What:	capifs
-When:	February 2011
-Files:	drivers/isdn/capi/capifs.*
-Why:	udev fully replaces this special file system that only contains CAPI
-	NCCI TTY device nodes. User space (pppdcapiplugin) works without
-	noticing the difference.
-Who:	Jan Kiszka <jan.kiszka@web.de>
-
-----------------------------
-
 What:	KVM paravirt mmu host support
 When:	January 2011
 Why:	The paravirt mmu host support is slower than non-paravirt mmu, both
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
index ee496eb..88d4afb 100644
--- a/Documentation/networking/batman-adv.txt
+++ b/Documentation/networking/batman-adv.txt
@@ -1,4 +1,4 @@
-[state: 27-01-2011]
+[state: 17-04-2011]
 
 BATMAN-ADV
 ----------
@@ -19,6 +19,7 @@ duce the overhead to a minimum. It does not depend on any (other)
 network driver, and can be used on wifi as well as ethernet  lan,
 vpn,  etc ... (anything with ethernet-style layer 2).
 
+
 CONFIGURATION
 -------------
 
@@ -160,13 +161,13 @@ face.  Each  entry can/has to have the following values:
 -> "TQ mac  value"  -  src mac's link quality towards mac address
                        of a neighbor originator's interface which
                        is being used for routing
--> "HNA mac" - HNA announced by source mac
+-> "TT mac" - TT announced by source mac
 -> "PRIMARY" - this  is a primary interface
 -> "SEC mac" - secondary mac address of source
                (requires preceding PRIMARY)
 
 The TQ value has a range from 4 to 255 with 255 being  the  best.
-The HNA entries are showing which hosts are connected to the mesh
+The TT entries are showing which hosts are connected to the mesh
 via bat0 or being bridged into the mesh network.  The PRIMARY/SEC
 values are only applied on primary interfaces
 
@@ -199,7 +200,7 @@ abled  during run time. Following log_levels are defined:
 
 0 - All  debug  output  disabled
 1 - Enable messages related to routing / flooding / broadcasting
-2 - Enable route or hna added / changed / deleted
+2 - Enable route or tt entry added / changed / deleted
 3 - Enable all messages
 
 The debug output can be changed at runtime  using  the  file
@@ -207,7 +208,7 @@ The debug output can be changed at runtime  using  the  file
 
 # echo 2 > /sys/class/net/bat0/mesh/log_level
 
-will enable debug messages for when routes or HNAs change.
+will enable debug messages for when routes or TTs change.
 
 
 BATCTL
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index e27202bb..1f45bd8 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -1,7 +1,7 @@
 
 		Linux Ethernet Bonding Driver HOWTO
 
-		Latest update: 23 September 2009
+		Latest update: 27 April 2011
 
 Initial release : Thomas Davis <tadavis at lbl.gov>
 Corrections, HA extensions : 2000/10/03-15 :
@@ -585,25 +585,23 @@ mode
 		chosen.
 
 num_grat_arp
-
-	Specifies the number of gratuitous ARPs to be issued after a
-	failover event.  One gratuitous ARP is issued immediately after
-	the failover, subsequent ARPs are sent at a rate of one per link
-	monitor interval (arp_interval or miimon, whichever is active).
-
-	The valid range is 0 - 255; the default value is 1.  This option
-	affects only the active-backup mode.  This option was added for
-	bonding version 3.3.0.
-
 num_unsol_na
 
-	Specifies the number of unsolicited IPv6 Neighbor Advertisements
-	to be issued after a failover event.  One unsolicited NA is issued
-	immediately after the failover.
-
-	The valid range is 0 - 255; the default value is 1.  This option
-	affects only the active-backup mode.  This option was added for
-	bonding version 3.4.0.
+	Specify the number of peer notifications (gratuitous ARPs and
+	unsolicited IPv6 Neighbor Advertisements) to be issued after a
+	failover event.  As soon as the link is up on the new slave
+	(possibly immediately) a peer notification is sent on the
+	bonding device and each VLAN sub-device.  This is repeated at
+	each link monitor interval (arp_interval or miimon, whichever
+	is active) if the number is greater than 1.
+
+	The valid range is 0 - 255; the default value is 1.  These options
+	affect only the active-backup mode.  These options were added for
+	bonding versions 3.3.0 and 3.4.0 respectively.
+
+	From Linux 2.6.40 and bonding version 3.7.1, these notifications
+	are generated by the ipv4 and ipv6 code and the numbers of
+	repetitions cannot be set independently.
 
 primary
 
diff --git a/Documentation/networking/igb.txt b/Documentation/networking/igb.txt
index 98953c0..9a2a0371 100644
--- a/Documentation/networking/igb.txt
+++ b/Documentation/networking/igb.txt
@@ -93,6 +93,19 @@ Additional Configurations
   REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not
   found, the system will fallback to MSI or to Legacy interrupts.
 
+  MAC and VLAN anti-spoofing feature
+  ----------------------------------
+  When a malicious driver attempts to send a spoofed packet, it is dropped by
+  the hardware and not transmitted.  An interrupt is sent to the PF driver
+  notifying it of the spoof attempt.
+
+  When a spoofed packet is detected the PF driver will send the following
+  message to the system log (displayed by  the "dmesg" command):
+
+  Spoof event(s) detected on VF(n)
+
+  Where n=the VF that attempted to do the spoofing.
+
 Support
 =======
 
diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt
index cbd05ff..3201a70 100644
--- a/Documentation/sysctl/net.txt
+++ b/Documentation/sysctl/net.txt
@@ -32,6 +32,17 @@ Table : Subdirectories in /proc/sys/net
 1. /proc/sys/net/core - Network core options
 -------------------------------------------------------
 
+bpf_jit_enable
+--------------
+
+This enables Berkeley Packet Filter Just in Time compiler.
+Currently supported on x86_64 architecture, bpf_jit provides a framework
+to speed packet filtering, the one used by tcpdump/libpcap for example.
+Values :
+	0 - disable the JIT (default value)
+	1 - enable the JIT
+	2 - enable the JIT and ask the compiler to emit traces on kernel log.
+
 rmem_default
 ------------