Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: needs new maintainer
  hwmon: (lm85) Simplify device initialization function
  hwmon: (lm85) Misc cleanups
  hwmon: (lm85) Don't write back cached values
  hwmon: (lm85) Drop dead code
  hwmon: (lm85) Coding-style cleanups
  hwmon: (lm75) add new-style driver binding
  hwmon: (lm75) cleanup/reorg
  hwmon: (adt7473) clarify an awkward bit of code
  hwmon: (adt7473) Remove unused defines
  hwmon: (dme1737) fix voltage scaling
  hwmon: (dme1737) probe all addresses
  hwmon: (dme1737) demacrofy for readability

2 files changed, 8 insertions, 7 deletions

diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737
index 8f44607..b1fe009 100644
--- a/Documentation/hwmon/dme1737
+++ b/Documentation/hwmon/dme1737
@@ -22,6 +22,10 @@ Module Parameters
 			and PWM output control functions. Using this parameter
 			shouldn't be required since the BIOS usually takes care
 			of this.
+* probe_all_addr: bool	Include non-standard LPC addresses 0x162e and 0x164e
+			when probing for ISA devices. This is required for the
+			following boards:
+			- VIA EPIA SN18000
 
 Note that there is no need to use this parameter if the driver loads without
 complaining. The driver will say so if it is necessary.
diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85
index 9549237..6d41db7 100644
--- a/Documentation/hwmon/lm85
+++ b/Documentation/hwmon/lm85
@@ -96,11 +96,6 @@ initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has
 confirmed this "bug". The ADT7463 is reported to work as described in the
 documentation. The current lm85 driver does not show the offset register.
 
-The ADT7463 has a THERM asserted counter. This counter has a 22.76ms
-resolution and a range of 5.8 seconds. The driver implements a 32-bit
-accumulator of the counter value to extend the range to over a year. The
-counter will stay at it's max value until read.
-
 See the vendor datasheets for more information. There is application note
 from National (AN-1260) with some additional information about the LM85.
 The Analog Devices datasheet is very detailed and describes a procedure for
@@ -206,13 +201,15 @@ Configuration choices:
 
 The National LM85's have two vendor specific configuration
 features. Tach. mode and Spinup Control. For more details on these,
-see the LM85 datasheet or Application Note AN-1260.
+see the LM85 datasheet or Application Note AN-1260. These features
+are not currently supported by the lm85 driver.
 
 The Analog Devices ADM1027 has several vendor specific enhancements.
 The number of pulses-per-rev of the fans can be set, Tach monitoring
 can be optimized for PWM operation, and an offset can be applied to
 the temperatures to compensate for systemic errors in the
-measurements.
+measurements. These features are not currently supported by the lm85
+driver.
 
 In addition to the ADM1027 features, the ADT7463 also has Tmin control
 and THERM asserted counts. Automatic Tmin control acts to adjust the