dm thin: relax hard limit on the maximum size of a metadata device

The thin metadata format can only make use of a device that is <=
THIN_METADATA_MAX_SECTORS (currently 15.9375 GB).  Therefore, there is no
practical benefit to using a larger device.

However, it may be that other factors impose a certain granularity for
the space that is allocated to a device (E.g. lvm2 can impose a coarse
granularity through the use of large, >= 1 GB, physical extents).

Rather than reject a larger metadata device, during thin-pool device
construction, switch to allowing it but issue a warning if a device
larger than THIN_METADATA_MAX_SECTORS_WARNING (16 GB) is
provided.  Any space over 15.9375 GB will not be used.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

1 files changed, 5 insertions, 3 deletions

diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
index da50347..a119fbd 100644
--- a/Documentation/device-mapper/thin-provisioning.txt
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -75,10 +75,12 @@ less sharing than average you'll need a larger-than-average metadata device.
 
 As a guide, we suggest you calculate the number of bytes to use in the
 metadata device as 48 * $data_dev_size / $data_block_size but round it up
-to 2MB if the answer is smaller.  The largest size supported is 16GB.
+to 2MB if the answer is smaller.  If you're creating large numbers of
+snapshots which are recording large amounts of change, you may find you
+need to increase this.
 
-If you're creating large numbers of snapshots which are recording large
-amounts of change, you may need find you need to increase this.
+The largest size supported is 16GB: If the device is larger,
+a warning will be issued and the excess space will not be used.
 
 Reloading a pool table
 ----------------------