Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (207 commits)
  [SCSI] gdth: fix CONFIG_ISA build failure
  [SCSI] esp_scsi: remove __dev{init,exit}
  [SCSI] gdth: !use_sg cleanup and use of scsi accessors
  [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2
  [SCSI] gdth: Setup proper per-command private data
  [SCSI] gdth: Remove gdth_ctr_tab[]
  [SCSI] gdth: switch to modern scsi host registration
  [SCSI] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes
  [SCSI] gdth: clean up host private data
  [SCSI] gdth: Remove virt hosts
  [SCSI] gdth: Reorder scsi_host_template intitializers
  [SCSI] gdth: kill gdth_{read,write}[bwl] wrappers
  [SCSI] gdth: Remove 2.4.x support, in-kernel changelog
  [SCSI] gdth: split out pci probing
  [SCSI] gdth: split out eisa probing
  [SCSI] gdth: split out isa probing
  gdth: Make one abuse of scsi_cmnd less obvious
  [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation
  [SCSI] usb storage: use scsi_eh API in REQUEST_SENSE execution
  [SCSI] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
  ...

4 files changed, 296 insertions, 6 deletions

diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX
index 1235483..aa1f7e9 100644
--- a/Documentation/scsi/00-INDEX
+++ b/Documentation/scsi/00-INDEX
@@ -2,14 +2,20 @@
 	- this file
 53c700.txt
 	- info on driver for 53c700 based adapters
-AM53C974.txt
-	- info on driver for AM53c974 based adapters
 BusLogic.txt
 	- info on driver for adapters with BusLogic chips
-ChangeLog
+ChangeLog.1992-1997
 	- Changes to scsi files, if not listed elsewhere
+ChangeLog.arcmsr
+	- Changes to driver for ARECA's SATA RAID controller cards
 ChangeLog.ips
 	- IBM ServeRAID driver Changelog
+ChangeLog.lpfc
+	- Changes to lpfc driver
+ChangeLog.megaraid
+	- Changes to LSI megaraid controller.
+ChangeLog.megaraid_sas
+	- Changes to serial attached scsi version of LSI megaraid controller.
 ChangeLog.ncr53c8xx
 	- Changes to ncr53c8xx driver
 ChangeLog.sym53c8xx
@@ -20,26 +26,44 @@ FlashPoint.txt
 	- info on driver for BusLogic FlashPoint adapters
 LICENSE.FlashPoint
 	- Licence of the Flashpoint driver
+LICENSE.qla2xxx
+	- License for QLogic Linux Fibre Channel HBA Driver firmware.
 Mylex.txt
 	- info on driver for Mylex adapters
 NinjaSCSI.txt
 	- info on WorkBiT NinjaSCSI-32/32Bi driver
+aacraid.txt
+	- Driver supporting Adaptec RAID controllers
 aha152x.txt
 	- info on driver for Adaptec AHA152x based adapters
+aic79xx.txt
+	- Adaptec Ultra320 SCSI host adapters
 aic7xxx.txt
 	- info on driver for Adaptec controllers
 aic7xxx_old.txt
 	- info on driver for Adaptec controllers, old generation
+arcmsr_spec.txt
+	- ARECA FIRMWARE SPEC (for IOP331 adapter)
+dc395x.txt
+	- README file for the dc395x SCSI driver
 dpti.txt
 	- info on driver for DPT SmartRAID and Adaptec I2O RAID based adapters
 dtc3x80.txt
 	- info on driver for DTC 2x80 based adapters
 g_NCR5380.txt
 	- info on driver for NCR5380 and NCR53c400 based adapters
+hptiop.txt
+	- HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
 ibmmca.txt
 	- info on driver for IBM adapters with MCA bus
 in2000.txt
 	- info on in2000 driver
+libsas.txt
+	- Serial Attached SCSI management layer.
+lpfc.txt
+	- LPFC driver release notes
+megaraid.txt
+	- Common Management Module, shared code handling ioctls for LSI drivers
 ncr53c7xx.txt
 	- info on driver for NCR53c7xx based adapters
 ncr53c8xx.txt
@@ -50,6 +74,8 @@ ppa.txt
 	- info on driver for IOmega zip drive
 qlogicfas.txt
 	- info on driver for QLogic FASxxx based adapters
+scsi-changer.txt
+	- README for the SCSI media changer driver
 scsi-generic.txt
 	- info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
 scsi.txt
@@ -58,6 +84,8 @@ scsi_mid_low_api.txt
 	- info on API between SCSI layer and low level drivers
 scsi_eh.txt
 	- info on SCSI midlayer error handling infrastructure
+scsi_fc_transport.txt
+	- SCSI Fiber Channel Tansport
 st.txt
 	- info on scsi tape driver
 sym53c500_cs.txt
diff --git a/Documentation/scsi/ChangeLog.arcmsr b/Documentation/scsi/ChangeLog.arcmsr
index 162c47f..cd8403a 100644
--- a/Documentation/scsi/ChangeLog.arcmsr
+++ b/Documentation/scsi/ChangeLog.arcmsr
@@ -53,4 +53,19 @@
 **						for linux standard list
 **						enable usage of pci message signal interrupt
 **						follow Randy.Danlup kindness suggestion cleanup this code
-**************************************************************************
\ No newline at end of file
+** 1.20.00.14   05/02/2007	 Erich Chen & Nick Cheng
+**						1.implement PCI-Express error recovery function and AER capability
+**						2.implement the selection of ARCMSR_MAX_XFER_SECTORS_B=4096
+**				 		if firmware version is newer than 1.42
+**						3.modify arcmsr_iop_reset to improve the ability
+**						4.modify the ISR, arcmsr_interrupt routine,to prevent the
+**						inconsistency with sg_mod driver if application	directly calls
+**						the arcmsr driver w/o passing through scsi mid layer
+**						specially thanks to Yanmin Zhang's openhanded help about AER
+** 1.20.00.15   08/30/2007	 Erich Chen & Nick Cheng
+**						1. support ARC1200/1201/1202 SATA RAID adapter, which is named
+**						ACB_ADAPTER_TYPE_B
+**						2. modify the arcmsr_pci_slot_reset function
+**						3. modify the arcmsr_pci_ers_disconnect_forepart function
+**						4. modify the arcmsr_pci_ers_need_reset_forepart function
+**************************************************************************
diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt
index cc12b55..a825784 100644
--- a/Documentation/scsi/aacraid.txt
+++ b/Documentation/scsi/aacraid.txt
@@ -38,10 +38,8 @@ Supported Cards/Chipsets
 	9005:0286:9005:02ac	Adaptec	1800 (Typhoon44)
 	9005:0285:9005:02b5	Adaptec	5445 (Voodoo44)
 	9005:0285:15d9:02b5	SMC	AOC-USAS-S4i
-	9005:0285:15d9:02c9	SMC	AOC-USAS-S4iR
 	9005:0285:9005:02b6	Adaptec	5805 (Voodoo80)
 	9005:0285:15d9:02b6	SMC	AOC-USAS-S8i
-	9005:0285:15d9:02ca	SMC	AOC-USAS-S8iR
 	9005:0285:9005:02b7	Adaptec	5085 (Voodoo08)
 	9005:0285:9005:02bb	Adaptec	3405 (Marauder40LP)
 	9005:0285:9005:02bc	Adaptec	3805 (Marauder80LP)
@@ -50,9 +48,14 @@ Supported Cards/Chipsets
 	9005:0285:9005:02be	Adaptec	31605 (Marauder160)
 	9005:0285:9005:02c3	Adaptec	51205 (Voodoo120)
 	9005:0285:9005:02c4	Adaptec	51605 (Voodoo160)
+	9005:0285:15d9:02c9	SMC	AOC-USAS-S4iR
+	9005:0285:15d9:02ca	SMC	AOC-USAS-S8iR
 	9005:0285:9005:02ce	Adaptec	51245 (Voodoo124)
 	9005:0285:9005:02cf	Adaptec	51645 (Voodoo164)
 	9005:0285:9005:02d0	Adaptec	52445 (Voodoo244)
+	9005:0285:9005:02d1	Adaptec	5405 (Voodoo40)
+	9005:0285:15d9:02d2	SMC	AOC-USAS-S8i-LP
+	9005:0285:15d9:02d3	SMC	AOC-USAS-S8iR-LP
 	1011:0046:9005:0364	Adaptec	5400S (Mustang)
 	9005:0287:9005:0800	Adaptec	Themisto (Jupiter)
 	9005:0200:9005:0200	Adaptec	Themisto (Jupiter)
@@ -103,6 +106,7 @@ Supported Cards/Chipsets
 	9005:0285:108e:7aac	SUN	STK RAID REM (Voodoo44 Coyote)
 	9005:0285:108e:0286	SUN	STK RAID INT (Cougar)
 	9005:0285:108e:0287	SUN	STK RAID EXT (Prometheus)
+	9005:0285:108e:7aae	SUN	STK RAID EM (Narvi)
 
 People
 -------------------------
diff --git a/Documentation/scsi/advansys.txt b/Documentation/scsi/advansys.txt
new file mode 100644
index 0000000..4a3db62
--- /dev/null
+++ b/Documentation/scsi/advansys.txt
@@ -0,0 +1,243 @@
+AdvanSys (Advanced System Products, Inc.) manufactures the following
+RISC-based, Bus-Mastering, Fast (10 Mhz) and Ultra (20 Mhz) Narrow
+(8-bit transfer) SCSI Host Adapters for the ISA, EISA, VL, and PCI
+buses and RISC-based, Bus-Mastering, Ultra (20 Mhz) Wide (16-bit
+transfer) SCSI Host Adapters for the PCI bus.
+
+The CDB counts below indicate the number of SCSI CDB (Command
+Descriptor Block) requests that can be stored in the RISC chip
+cache and board LRAM. A CDB is a single SCSI command. The driver
+detect routine will display the number of CDBs available for each
+adapter detected. The number of CDBs used by the driver can be
+lowered in the BIOS by changing the 'Host Queue Size' adapter setting.
+
+Laptop Products:
+   ABP-480 - Bus-Master CardBus (16 CDB)
+
+Connectivity Products:
+   ABP510/5150 - Bus-Master ISA (240 CDB)
+   ABP5140 - Bus-Master ISA PnP (16 CDB)
+   ABP5142 - Bus-Master ISA PnP with floppy (16 CDB)
+   ABP902/3902 - Bus-Master PCI (16 CDB)
+   ABP3905 - Bus-Master PCI (16 CDB)
+   ABP915 - Bus-Master PCI (16 CDB)
+   ABP920 - Bus-Master PCI (16 CDB)
+   ABP3922 - Bus-Master PCI (16 CDB)
+   ABP3925 - Bus-Master PCI (16 CDB)
+   ABP930 - Bus-Master PCI (16 CDB)
+   ABP930U - Bus-Master PCI Ultra (16 CDB)
+   ABP930UA - Bus-Master PCI Ultra (16 CDB)
+   ABP960 - Bus-Master PCI MAC/PC (16 CDB)
+   ABP960U - Bus-Master PCI MAC/PC Ultra (16 CDB)
+
+Single Channel Products:
+   ABP542 - Bus-Master ISA with floppy (240 CDB)
+   ABP742 - Bus-Master EISA (240 CDB)
+   ABP842 - Bus-Master VL (240 CDB)
+   ABP940 - Bus-Master PCI (240 CDB)
+   ABP940U - Bus-Master PCI Ultra (240 CDB)
+   ABP940UA/3940UA - Bus-Master PCI Ultra (240 CDB)
+   ABP970 - Bus-Master PCI MAC/PC (240 CDB)
+   ABP970U - Bus-Master PCI MAC/PC Ultra (240 CDB)
+   ABP3960UA - Bus-Master PCI MAC/PC Ultra (240 CDB)
+   ABP940UW/3940UW - Bus-Master PCI Ultra-Wide (253 CDB)
+   ABP970UW - Bus-Master PCI MAC/PC Ultra-Wide (253 CDB)
+   ABP3940U2W - Bus-Master PCI LVD/Ultra2-Wide (253 CDB)
+
+Multi-Channel Products:
+   ABP752 - Dual Channel Bus-Master EISA (240 CDB Per Channel)
+   ABP852 - Dual Channel Bus-Master VL (240 CDB Per Channel)
+   ABP950 - Dual Channel Bus-Master PCI (240 CDB Per Channel)
+   ABP950UW - Dual Channel Bus-Master PCI Ultra-Wide (253 CDB Per Channel)
+   ABP980 - Four Channel Bus-Master PCI (240 CDB Per Channel)
+   ABP980U - Four Channel Bus-Master PCI Ultra (240 CDB Per Channel)
+   ABP980UA/3980UA - Four Channel Bus-Master PCI Ultra (16 CDB Per Chan.)
+   ABP3950U2W - Bus-Master PCI LVD/Ultra2-Wide and Ultra-Wide (253 CDB)
+   ABP3950U3W - Bus-Master PCI Dual LVD2/Ultra3-Wide (253 CDB)
+
+Driver Compile Time Options and Debugging
+
+The following constants can be defined in the source file.
+
+1. ADVANSYS_ASSERT - Enable driver assertions (Def: Enabled)
+
+   Enabling this option adds assertion logic statements to the
+   driver. If an assertion fails a message will be displayed to
+   the console, but the system will continue to operate. Any
+   assertions encountered should be reported to the person
+   responsible for the driver. Assertion statements may proactively
+   detect problems with the driver and facilitate fixing these
+   problems. Enabling assertions will add a small overhead to the
+   execution of the driver.
+
+2. ADVANSYS_DEBUG - Enable driver debugging (Def: Disabled)
+
+   Enabling this option adds tracing functions to the driver and the
+   ability to set a driver tracing level at boot time.  This option is
+   very useful for debugging the driver, but it will add to the size
+   of the driver execution image and add overhead to the execution of
+   the driver.
+
+   The amount of debugging output can be controlled with the global
+   variable 'asc_dbglvl'. The higher the number the more output. By
+   default the debug level is 0.
+
+   If the driver is loaded at boot time and the LILO Driver Option
+   is included in the system, the debug level can be changed by
+   specifying a 5th (ASC_NUM_IOPORT_PROBE + 1) I/O Port. The
+   first three hex digits of the pseudo I/O Port must be set to
+   'deb' and the fourth hex digit specifies the debug level: 0 - F.
+   The following command line will look for an adapter at 0x330
+   and set the debug level to 2.
+
+      linux advansys=0x330,0,0,0,0xdeb2
+
+   If the driver is built as a loadable module this variable can be
+   defined when the driver is loaded. The following insmod command
+   will set the debug level to one.
+
+      insmod advansys.o asc_dbglvl=1
+
+   Debugging Message Levels:
+      0: Errors Only
+      1: High-Level Tracing
+      2-N: Verbose Tracing
+
+   To enable debug output to console, please make sure that:
+
+   a. System and kernel logging is enabled (syslogd, klogd running).
+   b. Kernel messages are routed to console output. Check
+      /etc/syslog.conf for an entry similar to this:
+
+           kern.*                  /dev/console
+
+   c. klogd is started with the appropriate -c parameter
+      (e.g. klogd -c 8)
+
+   This will cause printk() messages to be be displayed on the
+   current console. Refer to the klogd(8) and syslogd(8) man pages
+   for details.
+
+   Alternatively you can enable printk() to console with this
+   program. However, this is not the 'official' way to do this.
+   Debug output is logged in /var/log/messages.
+
+     main()
+     {
+             syscall(103, 7, 0, 0);
+     }
+
+   Increasing LOG_BUF_LEN in kernel/printk.c to something like
+   40960 allows more debug messages to be buffered in the kernel
+   and written to the console or log file.
+
+3. ADVANSYS_STATS - Enable statistics (Def: Enabled)
+
+   Enabling this option adds statistics collection and display
+   through /proc to the driver. The information is useful for
+   monitoring driver and device performance. It will add to the
+   size of the driver execution image and add minor overhead to
+   the execution of the driver.
+
+   Statistics are maintained on a per adapter basis. Driver entry
+   point call counts and transfer size counts are maintained.
+   Statistics are only available for kernels greater than or equal
+   to v1.3.0 with the CONFIG_PROC_FS (/proc) file system configured.
+
+   AdvanSys SCSI adapter files have the following path name format:
+
+      /proc/scsi/advansys/{0,1,2,3,...}
+
+   This information can be displayed with cat. For example:
+
+      cat /proc/scsi/advansys/0
+
+   When ADVANSYS_STATS is not defined the AdvanSys /proc files only
+   contain adapter and device configuration information.
+
+Driver LILO Option
+
+If init/main.c is modified as described in the 'Directions for Adding
+the AdvanSys Driver to Linux' section (B.4.) above, the driver will
+recognize the 'advansys' LILO command line and /etc/lilo.conf option.
+This option can be used to either disable I/O port scanning or to limit
+scanning to 1 - 4 I/O ports. Regardless of the option setting EISA and
+PCI boards will still be searched for and detected. This option only
+affects searching for ISA and VL boards.
+
+Examples:
+  1. Eliminate I/O port scanning:
+       boot: linux advansys=
+         or
+       boot: linux advansys=0x0
+  2. Limit I/O port scanning to one I/O port:
+       boot: linux advansys=0x110
+  3. Limit I/O port scanning to four I/O ports:
+       boot: linux advansys=0x110,0x210,0x230,0x330
+
+For a loadable module the same effect can be achieved by setting
+the 'asc_iopflag' variable and 'asc_ioport' array when loading
+the driver, e.g.
+
+      insmod advansys.o asc_iopflag=1 asc_ioport=0x110,0x330
+
+If ADVANSYS_DEBUG is defined a 5th (ASC_NUM_IOPORT_PROBE + 1)
+I/O Port may be added to specify the driver debug level. Refer to
+the 'Driver Compile Time Options and Debugging' section above for
+more information.
+
+Credits (Chronological Order)
+
+Bob Frey <bfrey@turbolinux.com.cn> wrote the AdvanSys SCSI driver
+and maintained it up to 3.3F. He continues to answer questions
+and help maintain the driver.
+
+Nathan Hartwell <mage@cdc3.cdc.net> provided the directions and
+basis for the Linux v1.3.X changes which were included in the
+1.2 release.
+
+Thomas E Zerucha <zerucha@shell.portal.com> pointed out a bug
+in advansys_biosparam() which was fixed in the 1.3 release.
+
+Erik Ratcliffe <erik@caldera.com> has done testing of the
+AdvanSys driver in the Caldera releases.
+
+Rik van Riel <H.H.vanRiel@fys.ruu.nl> provided a patch to
+AscWaitTixISRDone() which he found necessary to make the
+driver work with a SCSI-1 disk.
+
+Mark Moran <mmoran@mmoran.com> has helped test Ultra-Wide
+support in the 3.1A driver.
+
+Doug Gilbert <dgilbert@interlog.com> has made changes and
+suggestions to improve the driver and done a lot of testing.
+
+Ken Mort <ken@mort.net> reported a DEBUG compile bug fixed
+in 3.2K.
+
+Tom Rini <trini@kernel.crashing.org> provided the CONFIG_ISA
+patch and helped with PowerPC wide and narrow board support.
+
+Philip Blundell <philb@gnu.org> provided an
+advansys_interrupts_enabled patch.
+
+Dave Jones <dave@denial.force9.co.uk> reported the compiler
+warnings generated when CONFIG_PROC_FS was not defined in
+the 3.2M driver.
+
+Jerry Quinn <jlquinn@us.ibm.com> fixed PowerPC support (endian
+problems) for wide cards.
+
+Bryan Henderson <bryanh@giraffe-data.com> helped debug narrow
+card error handling.
+
+Manuel Veloso <veloso@pobox.com> worked hard on PowerPC narrow
+board support and fixed a bug in AscGetEEPConfig().
+
+Arnaldo Carvalho de Melo <acme@conectiva.com.br> made
+save_flags/restore_flags changes.
+
+Andy Kellner <AKellner@connectcom.net> continued the Advansys SCSI
+driver development for ConnectCom (Version > 3.3F).
+
+Ken Witherow for extensive testing during the development of version 3.4.