summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorSergei Shtylyov <sergei.shtylyov@cogentembedded.com>2014-02-18 03:12:43 +0300
committerDavid S. Miller <davem@davemloft.net>2014-02-18 17:21:34 -0500
commitb356e978e92fccd17a3e4620a4821bdbfb706c1a (patch)
tree07289470e765e7e97ac07e25ee6649beddac38e2 /Documentation
parente8f08ee0ad86012a2e9ac3a6cc318b058dd4d47c (diff)
downloadop-kernel-dev-b356e978e92fccd17a3e4620a4821bdbfb706c1a.zip
op-kernel-dev-b356e978e92fccd17a3e4620a4821bdbfb706c1a.tar.gz
sh_eth: add device tree support
Add support of the device tree probing for the Renesas SH-Mobile SoCs documenting the device tree binding as necessary. This work is loosely based on the original patch by Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/net/sh_eth.txt55
1 files changed, 55 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt
new file mode 100644
index 0000000..e7106b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sh_eth.txt
@@ -0,0 +1,55 @@
+* Renesas Electronics SH EtherMAC
+
+This file provides information on what the device node for the SH EtherMAC
+interface contains.
+
+Required properties:
+- compatible: "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC.
+ "renesas,ether-r8a7778" if the device is a part of R8A7778 SoC.
+ "renesas,ether-r8a7779" if the device is a part of R8A7779 SoC.
+ "renesas,ether-r8a7790" if the device is a part of R8A7790 SoC.
+ "renesas,ether-r8a7791" if the device is a part of R8A7791 SoC.
+ "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC.
+- reg: offset and length of (1) the E-DMAC/feLic register block (required),
+ (2) the TSU register block (optional).
+- interrupts: interrupt specifier for the sole interrupt.
+- phy-mode: see ethernet.txt file in the same directory.
+- phy-handle: see ethernet.txt file in the same directory.
+- #address-cells: number of address cells for the MDIO bus, must be equal to 1.
+- #size-cells: number of size cells on the MDIO bus, must be equal to 0.
+- clocks: clock phandle and specifier pair.
+- pinctrl-0: phandle, referring to a default pin configuration node.
+
+Optional properties:
+- interrupt-parent: the phandle for the interrupt controller that services
+ interrupts for this device.
+- pinctrl-names: pin configuration state name ("default").
+- renesas,no-ether-link: boolean, specify when a board does not provide a proper
+ Ether LINK signal.
+- renesas,ether-link-active-low: boolean, specify when the Ether LINK signal is
+ active-low instead of normal active-high.
+
+Example (Lager board):
+
+ ethernet@ee700000 {
+ compatible = "renesas,ether-r8a7790";
+ reg = <0 0xee700000 0 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+ phy-mode = "rmii";
+ phy-handle = <&phy1>;
+ pinctrl-0 = <&ether_pins>;
+ pinctrl-names = "default";
+ renesas,ether-link-active-low;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&phy1_pins>;
+ pinctrl-names = "default";
+ };
+ };
OpenPOWER on IntegriCloud