summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2014-02-19 01:24:22 -0500
committerDavid S. Miller <davem@davemloft.net>2014-02-19 01:24:22 -0500
commit1e8d6421cff2c24fe0b345711e7a21af02e8bcf5 (patch)
tree773b30106efb9b48055bc93958e5a94ac53768ce /Documentation
parentf7b12606b5de323a2bb5ca1696558efde8f25441 (diff)
parent960dfc4eb23a28495276b02604d7458e0e1a1ed8 (diff)
downloadop-kernel-dev-1e8d6421cff2c24fe0b345711e7a21af02e8bcf5.zip
op-kernel-dev-1e8d6421cff2c24fe0b345711e7a21af02e8bcf5.tar.gz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts: drivers/net/bonding/bond_3ad.h drivers/net/bonding/bond_main.c Two minor conflicts in bonding, both of which were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-tty3
-rw-r--r--Documentation/devicetree/bindings/mmc/atmel-hsmci.txt5
-rw-r--r--Documentation/devicetree/bindings/net/sti-dwmac.txt58
-rw-r--r--Documentation/devicetree/bindings/power/bq2415x.txt47
-rw-r--r--Documentation/devicetree/bindings/spi/spi_atmel.txt5
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt6
-rw-r--r--Documentation/i2c/instantiating-devices41
-rw-r--r--Documentation/networking/3c505.txt45
-rw-r--r--Documentation/phy.txt26
-rw-r--r--Documentation/spi/spi-summary17
-rw-r--r--Documentation/zh_CN/arm64/booting.txt65
-rw-r--r--Documentation/zh_CN/arm64/memory.txt46
-rw-r--r--Documentation/zh_CN/arm64/tagged-pointers.txt52
13 files changed, 334 insertions, 82 deletions
diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty
index ad22fb0..a2ccec3 100644
--- a/Documentation/ABI/testing/sysfs-tty
+++ b/Documentation/ABI/testing/sysfs-tty
@@ -3,7 +3,8 @@ Date: Nov 2010
Contact: Kay Sievers <kay.sievers@vrfy.org>
Description:
Shows the list of currently configured
- console devices, like 'tty1 ttyS0'.
+ tty devices used for the console,
+ like 'tty1 ttyS0'.
The last entry in the file is the active
device connected to /dev/console.
The file supports poll() to detect virtual
diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
index 0a85c70..07ad020 100644
--- a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
+++ b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
@@ -13,6 +13,9 @@ Required properties:
- #address-cells: should be one. The cell is the slot id.
- #size-cells: should be zero.
- at least one slot node
+- clock-names: tuple listing input clock names.
+ Required elements: "mci_clk"
+- clocks: phandles to input clocks.
The node contains child nodes for each slot that the platform uses
@@ -24,6 +27,8 @@ mmc0: mmc@f0008000 {
interrupts = <12 4>;
#address-cells = <1>;
#size-cells = <0>;
+ clock-names = "mci_clk";
+ clocks = <&mci0_clk>;
[ child node definitions...]
};
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt
new file mode 100644
index 0000000..3dd3d0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -0,0 +1,58 @@
+STMicroelectronics SoC DWMAC glue layer controller
+
+The device node has following properties.
+
+Required properties:
+ - compatible : Can be "st,stih415-dwmac", "st,stih416-dwmac" or
+ "st,stid127-dwmac".
+ - reg : Offset of the glue configuration register map in system
+ configuration regmap pointed by st,syscon property and size.
+
+ - reg-names : Should be "sti-ethconf".
+
+ - st,syscon : Should be phandle to system configuration node which
+ encompases this glue registers.
+
+ - st,tx-retime-src: On STi Parts for Giga bit speeds, 125Mhz clocks can be
+ wired up in from different sources. One via TXCLK pin and other via CLK_125
+ pin. This wiring is totally board dependent. However the retiming glue
+ logic should be configured accordingly. Possible values for this property
+
+ "txclk" - if 125Mhz clock is wired up via txclk line.
+ "clk_125" - if 125Mhz clock is wired up via clk_125 line.
+
+ This property is only valid for Giga bit setup( GMII, RGMII), and it is
+ un-used for non-giga bit (MII and RMII) setups. Also note that internal
+ clockgen can not generate stable 125Mhz clock.
+
+ - st,ext-phyclk: This boolean property indicates who is generating the clock
+ for tx and rx. This property is only valid for RMII case where the clock can
+ be generated from the MAC or PHY.
+
+ - clock-names: should be "sti-ethclk".
+ - clocks: Should point to ethernet clockgen which can generate phyclk.
+
+
+Example:
+
+ethernet0: dwmac@fe810000 {
+ device_type = "network";
+ compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+ reg = <0xfe810000 0x8000>, <0x8bc 0x4>;
+ reg-names = "stmmaceth", "sti-ethconf";
+ interrupts = <0 133 0>, <0 134 0>, <0 135 0>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ phy-mode = "mii";
+
+ st,syscon = <&syscfg_rear>;
+
+ snps,pbl = <32>;
+ snps,mixed-burst;
+
+ resets = <&softreset STIH416_ETH0_SOFTRESET>;
+ reset-names = "stmmaceth";
+ pinctrl-0 = <&pinctrl_mii0>;
+ pinctrl-names = "default";
+ clocks = <&CLK_S_GMAC0_PHY>;
+ clock-names = "stmmaceth";
+};
diff --git a/Documentation/devicetree/bindings/power/bq2415x.txt b/Documentation/devicetree/bindings/power/bq2415x.txt
new file mode 100644
index 0000000..d0327f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/bq2415x.txt
@@ -0,0 +1,47 @@
+Binding for TI bq2415x Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq24150"
+ * "ti,bq24150"
+ * "ti,bq24150a"
+ * "ti,bq24151"
+ * "ti,bq24151a"
+ * "ti,bq24152"
+ * "ti,bq24153"
+ * "ti,bq24153a"
+ * "ti,bq24155"
+ * "ti,bq24156"
+ * "ti,bq24156a"
+ * "ti,bq24158"
+- reg: integer, i2c address of the device.
+- ti,current-limit: integer, initial maximum current charger can pull
+ from power supply in mA.
+- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
+ The chip will use slow precharge if battery voltage
+ is below this value.
+- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
+- ti,charge-current: integer, maximum charging current in mA.
+- ti,termination-current: integer, charge will be terminated when current in
+ constant-voltage phase drops below this value (in mA).
+- ti,resistor-sense: integer, value of sensing resistor in milliohm.
+
+Optional properties:
+- ti,usb-charger-detection: phandle to usb charger detection device.
+ (required for auto mode)
+
+Example from Nokia N900:
+
+bq24150a {
+ compatible = "ti,bq24150a";
+ reg = <0x6b>;
+
+ ti,current-limit = <100>;
+ ti,weak-battery-voltage = <3400>;
+ ti,battery-regulation-voltage = <4200>;
+ ti,charge-current = <650>;
+ ti,termination-current = <100>;
+ ti,resistor-sense = <68>;
+
+ ti,usb-charger-detection = <&isp1704>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
index 07e04cd..4f8184d 100644
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
@@ -5,6 +5,9 @@ Required properties:
- reg: Address and length of the register set for the device
- interrupts: Should contain spi interrupt
- cs-gpios: chipselects
+- clock-names: tuple listing input clock names.
+ Required elements: "spi_clk"
+- clocks: phandles to input clocks.
Example:
@@ -14,6 +17,8 @@ spi1: spi@fffcc000 {
interrupts = <13 4 5>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
cs-gpios = <&pioB 3 0>;
status = "okay";
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 3f900cd..40ce2df 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -8,6 +8,7 @@ ad Avionic Design GmbH
adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB
ak Asahi Kasei Corp.
+allwinner Allwinner Technology Co., Ltd.
altr Altera Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
amstaos AMS-Taos Inc.
@@ -40,6 +41,7 @@ gmt Global Mixed-mode Technology, Inc.
gumstix Gumstix, Inc.
haoyu Haoyu Microelectronic Co. Ltd.
hisilicon Hisilicon Limited.
+honeywell Honeywell
hp Hewlett Packard
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
@@ -55,6 +57,7 @@ maxim Maxim Integrated Products
microchip Microchip Technology Inc.
mosaixtech Mosaix Technologies, Inc.
national National Semiconductor
+neonode Neonode Inc.
nintendo Nintendo
nvidia NVIDIA
nxp NXP Semiconductors
@@ -64,7 +67,7 @@ phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
-qcom Qualcomm, Inc.
+qcom Qualcomm Technologies, Inc
ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
realtek Realtek Semiconductor Corp.
@@ -78,6 +81,7 @@ silabs Silicon Laboratories
simtek
sirf SiRF Technology, Inc.
snps Synopsys, Inc.
+spansion Spansion Inc.
st STMicroelectronics
ste ST-Ericsson
stericsson ST-Ericsson
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index c70e7a7..0d85ac19 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -8,8 +8,8 @@ reason, the kernel code must instantiate I2C devices explicitly. There are
several ways to achieve this, depending on the context and requirements.
-Method 1: Declare the I2C devices by bus number
------------------------------------------------
+Method 1a: Declare the I2C devices by bus number
+------------------------------------------------
This method is appropriate when the I2C bus is a system bus as is the case
for many embedded systems. On such systems, each I2C bus has a number
@@ -51,6 +51,43 @@ The devices will be automatically unbound and destroyed when the I2C bus
they sit on goes away (if ever.)
+Method 1b: Declare the I2C devices via devicetree
+-------------------------------------------------
+
+This method has the same implications as method 1a. The declaration of I2C
+devices is here done via devicetree as subnodes of the master controller.
+
+Example:
+
+ i2c1: i2c@400a0000 {
+ /* ... master properties skipped ... */
+ clock-frequency = <100000>;
+
+ flash@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ pca9532: gpio@60 {
+ compatible = "nxp,pca9532";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x60>;
+ };
+ };
+
+Here, two devices are attached to the bus using a speed of 100kHz. For
+additional properties which might be needed to set up the device, please refer
+to its devicetree documentation in Documentation/devicetree/bindings/.
+
+
+Method 1c: Declare the I2C devices via ACPI
+-------------------------------------------
+
+ACPI can also describe I2C devices. There is special documentation for this
+which is currently located at Documentation/acpi/enumeration.txt.
+
+
Method 2: Instantiate the devices explicitly
--------------------------------------------
diff --git a/Documentation/networking/3c505.txt b/Documentation/networking/3c505.txt
deleted file mode 100644
index 72f38b1..0000000
--- a/Documentation/networking/3c505.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-The 3Com Etherlink Plus (3c505) driver.
-
-This driver now uses DMA. There is currently no support for PIO operation.
-The default DMA channel is 6; this is _not_ autoprobed, so you must
-make sure you configure it correctly. If loading the driver as a
-module, you can do this with "modprobe 3c505 dma=n". If the driver is
-linked statically into the kernel, you must either use an "ether="
-statement on the command line, or change the definition of ELP_DMA in 3c505.h.
-
-The driver will warn you if it has to fall back on the compiled in
-default DMA channel.
-
-If no base address is given at boot time, the driver will autoprobe
-ports 0x300, 0x280 and 0x310 (in that order). If no IRQ is given, the driver
-will try to probe for it.
-
-The driver can be used as a loadable module.
-
-Theoretically, one instance of the driver can now run multiple cards,
-in the standard way (when loading a module, say "modprobe 3c505
-io=0x300,0x340 irq=10,11 dma=6,7" or whatever). I have not tested
-this, though.
-
-The driver may now support revision 2 hardware; the dependency on
-being able to read the host control register has been removed. This
-is also untested, since I don't have a suitable card.
-
-Known problems:
- I still see "DMA upload timed out" messages from time to time. These
-seem to be fairly non-fatal though.
- The card is old and slow.
-
-To do:
- Improve probe/setup code
- Test multicast and promiscuous operation
-
-Authors:
- The driver is mainly written by Craig Southeren, email
- <craigs@ineluki.apana.org.au>.
- Parts of the driver (adapting the driver to 1.1.4+ kernels,
- IRQ/address detection, some changes) and this README by
- Juha Laiho <jlaiho@ichaos.nullnet.fi>.
- DMA mode, more fixes, etc, by Philip Blundell <pjb27@cam.ac.uk>
- Multicard support, Software configurable DMA, etc., by
- Christopher Collins <ccollins@pcug.org.au>
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index 0103e4b..ebff6ee 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -75,14 +75,26 @@ Before the controller can make use of the PHY, it has to get a reference to
it. This framework provides the following APIs to get a reference to the PHY.
struct phy *phy_get(struct device *dev, const char *string);
+struct phy *phy_optional_get(struct device *dev, const char *string);
struct phy *devm_phy_get(struct device *dev, const char *string);
-
-phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot,
-the string arguments should contain the phy name as given in the dt data and
-in the case of non-dt boot, it should contain the label of the PHY.
-The only difference between the two APIs is that devm_phy_get associates the
-device with the PHY using devres on successful PHY get. On driver detach,
-release function is invoked on the the devres data and devres data is freed.
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
+
+phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
+be used to get the PHY. In the case of dt boot, the string arguments
+should contain the phy name as given in the dt data and in the case of
+non-dt boot, it should contain the label of the PHY. The two
+devm_phy_get associates the device with the PHY using devres on
+successful PHY get. On driver detach, release function is invoked on
+the the devres data and devres data is freed. phy_optional_get and
+devm_phy_optional_get should be used when the phy is optional. These
+two functions will never return -ENODEV, but instead returns NULL when
+the phy cannot be found.
+
+It should be noted that NULL is a valid phy reference. All phy
+consumer calls on the NULL phy become NOPs. That is the release calls,
+the phy_init() and phy_exit() calls, and phy_power_on() and
+phy_power_off() calls are all NOP when applied to a NULL phy. The NULL
+phy is useful in devices for handling optional phy devices.
5. Releasing a reference to the PHY
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index f72e0d1..7982bcc 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -543,7 +543,22 @@ SPI MASTER METHODS
queuing transfers that arrive in the meantime. When the driver is
finished with this message, it must call
spi_finalize_current_message() so the subsystem can issue the next
- transfer. This may sleep.
+ message. This may sleep.
+
+ master->transfer_one(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *transfer)
+ The subsystem calls the driver to transfer a single transfer while
+ queuing transfers that arrive in the meantime. When the driver is
+ finished with this transfer, it must call
+ spi_finalize_current_transfer() so the subsystem can issue the next
+ transfer. This may sleep. Note: transfer_one and transfer_one_message
+ are mutually exclusive; when both are set, the generic subsystem does
+ not call your transfer_one callback.
+
+ Return values:
+ negative errno: error
+ 0: transfer is finished
+ 1: transfer is still in progress
DEPRECATED METHODS
diff --git a/Documentation/zh_CN/arm64/booting.txt b/Documentation/zh_CN/arm64/booting.txt
index 28fa325..6f6d956 100644
--- a/Documentation/zh_CN/arm64/booting.txt
+++ b/Documentation/zh_CN/arm64/booting.txt
@@ -7,7 +7,7 @@ help. Contact the Chinese maintainer if this translation is outdated
or if there is a problem with the translation.
Maintainer: Will Deacon <will.deacon@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
---------------------------------------------------------------------
Documentation/arm64/booting.txt 的中文翻译
@@ -16,9 +16,9 @@ Documentation/arm64/booting.txt 的中文翻译
译存在问题,请联系中文版维护者。
英文版维护者: Will Deacon <will.deacon@arm.com>
-中文版维护者: 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者: 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版校译者: 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版维护者: 傅炜 Fu Wei <wefu@redhat.com>
+中文版翻译者: 傅炜 Fu Wei <wefu@redhat.com>
+中文版校译者: 傅炜 Fu Wei <wefu@redhat.com>
以下为正文
---------------------------------------------------------------------
@@ -64,8 +64,8 @@ RAM,或可能使用对这个设备已知的 RAM 信息,还可能使用任何
必要性: 强制
-设备树数据块(dtb)大小必须不大于 2 MB,且位于从内核映像起始算起第一个
-512MB 内的 2MB 边界上。这使得内核可以通过初始页表中的单个节描述符来
+设备树数据块(dtb)必须 8 字节对齐,并位于从内核映像起始算起第一个 512MB
+内,且不得跨越 2MB 对齐边界。这使得内核可以通过初始页表中的单个节描述符来
映射此数据块。
@@ -84,13 +84,23 @@ AArch64 内核当前没有提供自解压代码,因此如果使用了压缩内
必要性: 强制
-已解压的内核映像包含一个 32 字节的头,内容如下:
+已解压的内核映像包含一个 64 字节的头,内容如下:
- u32 magic = 0x14000008; /* 跳转到 stext, 小端 */
- u32 res0 = 0; /* 保留 */
+ u32 code0; /* 可执行代码 */
+ u32 code1; /* 可执行代码 */
u64 text_offset; /* 映像装载偏移 */
+ u64 res0 = 0; /* 保留 */
u64 res1 = 0; /* 保留 */
u64 res2 = 0; /* 保留 */
+ u64 res3 = 0; /* 保留 */
+ u64 res4 = 0; /* 保留 */
+ u32 magic = 0x644d5241; /* 魔数, 小端, "ARM\x64" */
+ u32 res5 = 0; /* 保留 */
+
+
+映像头注释:
+
+- code0/code1 负责跳转到 stext.
映像必须位于系统 RAM 起始处的特定偏移(当前是 0x80000)。系统 RAM
的起始地址必须是以 2MB 对齐的。
@@ -118,9 +128,9 @@ AArch64 内核当前没有提供自解压代码,因此如果使用了压缩内
外部高速缓存(如果存在)必须配置并禁用。
- 架构计时器
- CNTFRQ 必须设定为计时器的频率。
- 如果在 EL1 模式下进入内核,则 CNTHCTL_EL2 中的 EL1PCTEN (bit 0)
- 必须置位。
+ CNTFRQ 必须设定为计时器的频率,且 CNTVOFF 必须设定为对所有 CPU
+ 都一致的值。如果在 EL1 模式下进入内核,则 CNTHCTL_EL2 中的
+ EL1PCTEN (bit 0) 必须置位。
- 一致性
通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。
@@ -131,23 +141,40 @@ AArch64 内核当前没有提供自解压代码,因此如果使用了压缩内
在进入内核映像的异常级中,所有构架中可写的系统寄存器必须通过软件
在一个更高的异常级别下初始化,以防止在 未知 状态下运行。
+以上对于 CPU 模式、高速缓存、MMU、架构计时器、一致性、系统寄存器的
+必要条件描述适用于所有 CPU。所有 CPU 必须在同一异常级别跳入内核。
+
引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口:
- 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树
- 数据块必须在每个 CPU 节点中包含以下内容:
-
- 1、‘enable-method’属性。目前,此字段支持的值仅为字符串“spin-table”。
-
- 2、‘cpu-release-addr’标识一个 64-bit、初始化为零的内存位置。
+ 数据块必须在每个 CPU 节点中包含一个 ‘enable-method’ 属性,所
+ 支持的 enable-method 请见下文。
引导装载程序必须生成这些设备树属性,并在跳入内核入口之前将其插入
数据块。
-- 任何辅助 CPU 必须在内存保留区(通过设备树中的 /memreserve/ 域传递
+- enable-method 为 “spin-table” 的 CPU 必须在它们的 CPU
+ 节点中包含一个 ‘cpu-release-addr’ 属性。这个属性标识了一个
+ 64 位自然对齐且初始化为零的内存位置。
+
+ 这些 CPU 必须在内存保留区(通过设备树中的 /memreserve/ 域传递
给内核)中自旋于内核之外,轮询它们的 cpu-release-addr 位置(必须
包含在保留区中)。可通过插入 wfe 指令来降低忙循环开销,而主 CPU 将
发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值
- 时,CPU 必须直接跳入此值所指向的地址。
+ 时,CPU 必须跳入此值所指向的地址。此值为一个单独的 64 位小端值,
+ 因此 CPU 须在跳转前将所读取的值转换为其本身的端模式。
+
+- enable-method 为 “psci” 的 CPU 保持在内核外(比如,在
+ memory 节点中描述为内核空间的内存区外,或在通过设备树 /memreserve/
+ 域中描述为内核保留区的空间中)。内核将会发起在 ARM 文档(编号
+ ARM DEN 0022A:用于 ARM 上的电源状态协调接口系统软件)中描述的
+ CPU_ON 调用来将 CPU 带入内核。
+
+ *译者注:到文档翻译时,此文档已更新为 ARM DEN 0022B。
+
+ 设备树必须包含一个 ‘psci’ 节点,请参考以下文档:
+ Documentation/devicetree/bindings/arm/psci.txt
+
- 辅助 CPU 通用寄存器设置
x0 = 0 (保留,将来可能使用)
diff --git a/Documentation/zh_CN/arm64/memory.txt b/Documentation/zh_CN/arm64/memory.txt
index a5f6283..a782704 100644
--- a/Documentation/zh_CN/arm64/memory.txt
+++ b/Documentation/zh_CN/arm64/memory.txt
@@ -7,7 +7,7 @@ help. Contact the Chinese maintainer if this translation is outdated
or if there is a problem with the translation.
Maintainer: Catalin Marinas <catalin.marinas@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
---------------------------------------------------------------------
Documentation/arm64/memory.txt 的中文翻译
@@ -16,9 +16,9 @@ Documentation/arm64/memory.txt 的中文翻译
译存在问题,请联系中文版维护者。
英文版维护者: Catalin Marinas <catalin.marinas@arm.com>
-中文版维护者: 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者: 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版校译者: 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版维护者: 傅炜 Fu Wei <wefu@redhat.com>
+中文版翻译者: 傅炜 Fu Wei <wefu@redhat.com>
+中文版校译者: 傅炜 Fu Wei <wefu@redhat.com>
以下为正文
---------------------------------------------------------------------
@@ -41,7 +41,7 @@ AArch64 Linux 使用页大小为 4KB 的 3 级转换表配置,对于用户和
TTBR1 中,且从不写入 TTBR0。
-AArch64 Linux 内存布局:
+AArch64 Linux 在页大小为 4KB 时的内存布局:
起始地址 结束地址 大小 用途
-----------------------------------------------------------------------
@@ -55,15 +55,42 @@ ffffffbc00000000 ffffffbdffffffff 8GB vmemmap
ffffffbe00000000 ffffffbffbbfffff ~8GB [防护页,未来用于 vmmemap]
+ffffffbffbc00000 ffffffbffbdfffff 2MB earlyprintk 设备
+
ffffffbffbe00000 ffffffbffbe0ffff 64KB PCI I/O 空间
-ffffffbbffff0000 ffffffbcffffffff ~2MB [防护页]
+ffffffbffbe10000 ffffffbcffffffff ~2MB [防护页]
ffffffbffc000000 ffffffbfffffffff 64MB 模块
ffffffc000000000 ffffffffffffffff 256GB 内核逻辑内存映射
+AArch64 Linux 在页大小为 64KB 时的内存布局:
+
+起始地址 结束地址 大小 用途
+-----------------------------------------------------------------------
+0000000000000000 000003ffffffffff 4TB 用户空间
+
+fffffc0000000000 fffffdfbfffeffff ~2TB vmalloc
+
+fffffdfbffff0000 fffffdfbffffffff 64KB [防护页]
+
+fffffdfc00000000 fffffdfdffffffff 8GB vmemmap
+
+fffffdfe00000000 fffffdfffbbfffff ~8GB [防护页,未来用于 vmmemap]
+
+fffffdfffbc00000 fffffdfffbdfffff 2MB earlyprintk 设备
+
+fffffdfffbe00000 fffffdfffbe0ffff 64KB PCI I/O 空间
+
+fffffdfffbe10000 fffffdfffbffffff ~2MB [防护页]
+
+fffffdfffc000000 fffffdffffffffff 64MB 模块
+
+fffffe0000000000 ffffffffffffffff 2TB 内核逻辑内存映射
+
+
4KB 页大小的转换表查找:
+--------+--------+--------+--------+--------+--------+--------+--------+
@@ -91,3 +118,10 @@ ffffffc000000000 ffffffffffffffff 256GB 内核逻辑内存映射
| | +--------------------------> [41:29] L2 索引 (仅使用 38:29 )
| +-------------------------------> [47:42] L1 索引 (未使用)
+-------------------------------------------------> [63] TTBR0/1
+
+当使用 KVM 时, 管理程序(hypervisor)在 EL2 中通过相对内核虚拟地址的
+一个固定偏移来映射内核页(内核虚拟地址的高 24 位设为零):
+
+起始地址 结束地址 大小 用途
+-----------------------------------------------------------------------
+0000004000000000 0000007fffffffff 256GB 在 HYP 中映射的内核对象
diff --git a/Documentation/zh_CN/arm64/tagged-pointers.txt b/Documentation/zh_CN/arm64/tagged-pointers.txt
new file mode 100644
index 0000000..2664d1b
--- /dev/null
+++ b/Documentation/zh_CN/arm64/tagged-pointers.txt
@@ -0,0 +1,52 @@
+Chinese translated version of Documentation/arm64/tagged-pointers.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly. However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help. Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Will Deacon <will.deacon@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+---------------------------------------------------------------------
+Documentation/arm64/tagged-pointers.txt 的中文翻译
+
+如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文
+交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题,请联系中文版维护者。
+
+英文版维护者: Will Deacon <will.deacon@arm.com>
+中文版维护者: 傅炜 Fu Wei <wefu@redhat.com>
+中文版翻译者: 傅炜 Fu Wei <wefu@redhat.com>
+中文版校译者: 傅炜 Fu Wei <wefu@redhat.com>
+
+以下为正文
+---------------------------------------------------------------------
+ Linux 在 AArch64 中带标记的虚拟地址
+ =================================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2013 年 06 月 12 日
+
+本文档简述了在 AArch64 地址转换系统中提供的带标记的虚拟地址及其在
+AArch64 Linux 中的潜在用途。
+
+内核提供的地址转换表配置使通过 TTBR0 完成的虚拟地址转换(即用户空间
+映射),其虚拟地址的最高 8 位(63:56)会被转换硬件所忽略。这种机制
+让这些位可供应用程序自由使用,其注意事项如下:
+
+ (1) 内核要求所有传递到 EL1 的用户空间地址带有 0x00 标记。
+ 这意味着任何携带用户空间虚拟地址的系统调用(syscall)
+ 参数 *必须* 在陷入内核前使它们的最高字节被清零。
+
+ (2) 非零标记在传递信号时不被保存。这意味着在应用程序中利用了
+ 标记的信号处理函数无法依赖 siginfo_t 的用户空间虚拟
+ 地址所携带的包含其内部域信息的标记。此规则的一个例外是
+ 当信号是在调试观察点的异常处理程序中产生的,此时标记的
+ 信息将被保存。
+
+ (3) 当使用带标记的指针时需特别留心,因为仅对两个虚拟地址
+ 的高字节,C 编译器很可能无法判断它们是不同的。
+
+此构架会阻止对带标记的 PC 指针的利用,因此在异常返回时,其高字节
+将被设置成一个为 “55” 的扩展符。
OpenPOWER on IntegriCloud