summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorDave Airlie <airlied@redhat.com>2013-02-21 09:31:47 +1000
committerDave Airlie <airlied@redhat.com>2013-02-21 09:31:47 +1000
commitca18e1426bb2db987b67030256477c9571aebd09 (patch)
tree72e7cbe5f00f90390d00f5d3d4c9bdec79e48bbe /Documentation
parent74e1697478ffdee0e12e48db024a9b3677fd8cee (diff)
parent0d4bbaf9f3e5b9f52150ddc5a4ee8b0ab83a440b (diff)
downloadop-kernel-dev-ca18e1426bb2db987b67030256477c9571aebd09.zip
op-kernel-dev-ca18e1426bb2db987b67030256477c9571aebd09.tar.gz
Merge branch 'tilcdc-next' of git://people.freedesktop.org/~robclark/linux into drm-next
KMS driver for TI LCD controller * 'tilcdc-next' of git://people.freedesktop.org/~robclark/linux: drm/tilcdc: add support for LCD panels (v5) drm/tilcdc: add encoder slave (v2) drm/i2c: nxp-tda998x (v3) drm/tilcdc: add TI LCD Controller DRM driver (v4) drm/nouveau: use i2c encoder helper wrappers drm: i2c encoder helper wrappers drm/cma: add debugfs helpers drm: small fix in drm_send_vblank_event() drm: Don't set the plane->fb to NULL on successfull set_plane drm/cma-helper: fixup compilation Conflicts: drivers/gpu/drm/Kconfig drivers/gpu/drm/Makefile drivers/gpu/drm/drm_fb_cma_helper.c
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/drm/tilcdc/panel.txt59
-rw-r--r--Documentation/devicetree/bindings/drm/tilcdc/slave.txt18
-rw-r--r--Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt21
-rw-r--r--Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt21
4 files changed, 119 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/drm/tilcdc/panel.txt b/Documentation/devicetree/bindings/drm/tilcdc/panel.txt
new file mode 100644
index 0000000..9301c33
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/tilcdc/panel.txt
@@ -0,0 +1,59 @@
+Device-Tree bindings for tilcdc DRM generic panel output driver
+
+Required properties:
+ - compatible: value should be "ti,tilcdc,panel".
+ - panel-info: configuration info to configure LCDC correctly for the panel
+ - ac-bias: AC Bias Pin Frequency
+ - ac-bias-intrpt: AC Bias Pin Transitions per Interrupt
+ - dma-burst-sz: DMA burst size
+ - bpp: Bits per pixel
+ - fdd: FIFO DMA Request Delay
+ - sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling
+ - sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore
+ - raster-order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most
+ - fifo-th: DMA FIFO threshold
+ - display-timings: typical videomode of lcd panel. Multiple video modes
+ can be listed if the panel supports multiple timings, but the 'native-mode'
+ should be the preferred/default resolution. Refer to
+ Documentation/devicetree/bindings/video/display-timing.txt for display
+ timing binding details.
+
+Recommended properties:
+ - pinctrl-names, pinctrl-0: the pincontrol settings to configure
+ muxing properly for pins that connect to TFP410 device
+
+Example:
+
+ /* Settings for CDTech_S035Q01 / LCD3 cape: */
+ lcd3 {
+ compatible = "ti,tilcdc,panel";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bone_lcd3_cape_lcd_pins>;
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <16>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 320x240 {
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <21>;
+ hfront-porch = <58>;
+ hsync-len = <47>;
+ vback-porch = <11>;
+ vfront-porch = <23>;
+ vsync-len = <2>;
+ clock-frequency = <8000000>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/drm/tilcdc/slave.txt b/Documentation/devicetree/bindings/drm/tilcdc/slave.txt
new file mode 100644
index 0000000..3d2c524
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/tilcdc/slave.txt
@@ -0,0 +1,18 @@
+Device-Tree bindings for tilcdc DRM encoder slave output driver
+
+Required properties:
+ - compatible: value should be "ti,tilcdc,slave".
+ - i2c: the phandle for the i2c device the encoder slave is connected to
+
+Recommended properties:
+ - pinctrl-names, pinctrl-0: the pincontrol settings to configure
+ muxing properly for pins that connect to TFP410 device
+
+Example:
+
+ hdmi {
+ compatible = "ti,tilcdc,slave";
+ i2c = <&i2c0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+ };
diff --git a/Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt b/Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt
new file mode 100644
index 0000000..a58ae77
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt
@@ -0,0 +1,21 @@
+Device-Tree bindings for tilcdc DRM TFP410 output driver
+
+Required properties:
+ - compatible: value should be "ti,tilcdc,tfp410".
+ - i2c: the phandle for the i2c device to use for DDC
+
+Recommended properties:
+ - pinctrl-names, pinctrl-0: the pincontrol settings to configure
+ muxing properly for pins that connect to TFP410 device
+ - powerdn-gpio: the powerdown GPIO, pulled low to power down the
+ TFP410 device (for DPMS_OFF)
+
+Example:
+
+ dvicape {
+ compatible = "ti,tilcdc,tfp410";
+ i2c = <&i2c2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bone_dvi_cape_dvi_00A1_pins>;
+ powerdn-gpio = <&gpio2 31 0>;
+ };
diff --git a/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt
new file mode 100644
index 0000000..e5f1301
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt
@@ -0,0 +1,21 @@
+Device-Tree bindings for tilcdc DRM driver
+
+Required properties:
+ - compatible: value should be "ti,am33xx-tilcdc".
+ - interrupts: the interrupt number
+ - reg: base address and size of the LCDC device
+
+Recommended properties:
+ - interrupt-parent: the phandle for the interrupt controller that
+ services interrupts for this device.
+ - ti,hwmods: Name of the hwmod associated to the LCDC
+
+Example:
+
+ fb: fb@4830e000 {
+ compatible = "ti,am33xx-tilcdc";
+ reg = <0x4830e000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+ ti,hwmods = "lcdc";
+ };
OpenPOWER on IntegriCloud