Merge branch 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm

* 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (142 commits)
  KVM: Initialize fpu state in preemptible context
  KVM: VMX: when entering real mode align segment base to 16 bytes
  KVM: MMU: handle 'map_writable' in set_spte() function
  KVM: MMU: audit: allow audit more guests at the same time
  KVM: Fetch guest cr3 from hardware on demand
  KVM: Replace reads of vcpu->arch.cr3 by an accessor
  KVM: MMU: only write protect mappings at pagetable level
  KVM: VMX: Correct asm constraint in vmcs_load()/vmcs_clear()
  KVM: MMU: Initialize base_role for tdp mmus
  KVM: VMX: Optimize atomic EFER load
  KVM: VMX: Add definitions for more vm entry/exit control bits
  KVM: SVM: copy instruction bytes from VMCB
  KVM: SVM: implement enhanced INVLPG intercept
  KVM: SVM: enhance mov DR intercept handler
  KVM: SVM: enhance MOV CR intercept handler
  KVM: SVM: add new SVM feature bit names
  KVM: cleanup emulate_instruction
  KVM: move complete_insn_gp() into x86.c
  KVM: x86: fix CR8 handling
  KVM guest: Fix kvm clock initialization when it's configured out
  ...

4 files changed, 219 insertions, 1 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 338c96e..55fe759 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1705,6 +1705,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	no-kvmclock	[X86,KVM] Disable paravirtualized KVM clock driver
 
+	no-kvmapf	[X86,KVM] Disable paravirtualized asynchronous page
+			fault handling.
+
 	nolapic		[X86-32,APIC] Do not enable or use the local APIC.
 
 	nolapic_timer	[X86-32,APIC] Do not use the local APIC timer.
diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index 50713e3..ad85797 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -1085,6 +1085,184 @@ of 4 instructions that make up a hypercall.
 If any additional field gets added to this structure later on, a bit for that
 additional piece of information will be set in the flags bitmap.
 
+4.47 KVM_ASSIGN_PCI_DEVICE
+
+Capability: KVM_CAP_DEVICE_ASSIGNMENT
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_pci_dev (in)
+Returns: 0 on success, -1 on error
+
+Assigns a host PCI device to the VM.
+
+struct kvm_assigned_pci_dev {
+	__u32 assigned_dev_id;
+	__u32 busnr;
+	__u32 devfn;
+	__u32 flags;
+	__u32 segnr;
+	union {
+		__u32 reserved[11];
+	};
+};
+
+The PCI device is specified by the triple segnr, busnr, and devfn.
+Identification in succeeding service requests is done via assigned_dev_id. The
+following flags are specified:
+
+/* Depends on KVM_CAP_IOMMU */
+#define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
+
+4.48 KVM_DEASSIGN_PCI_DEVICE
+
+Capability: KVM_CAP_DEVICE_DEASSIGNMENT
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_pci_dev (in)
+Returns: 0 on success, -1 on error
+
+Ends PCI device assignment, releasing all associated resources.
+
+See KVM_CAP_DEVICE_ASSIGNMENT for the data structure. Only assigned_dev_id is
+used in kvm_assigned_pci_dev to identify the device.
+
+4.49 KVM_ASSIGN_DEV_IRQ
+
+Capability: KVM_CAP_ASSIGN_DEV_IRQ
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_irq (in)
+Returns: 0 on success, -1 on error
+
+Assigns an IRQ to a passed-through device.
+
+struct kvm_assigned_irq {
+	__u32 assigned_dev_id;
+	__u32 host_irq;
+	__u32 guest_irq;
+	__u32 flags;
+	union {
+		struct {
+			__u32 addr_lo;
+			__u32 addr_hi;
+			__u32 data;
+		} guest_msi;
+		__u32 reserved[12];
+	};
+};
+
+The following flags are defined:
+
+#define KVM_DEV_IRQ_HOST_INTX    (1 << 0)
+#define KVM_DEV_IRQ_HOST_MSI     (1 << 1)
+#define KVM_DEV_IRQ_HOST_MSIX    (1 << 2)
+
+#define KVM_DEV_IRQ_GUEST_INTX   (1 << 8)
+#define KVM_DEV_IRQ_GUEST_MSI    (1 << 9)
+#define KVM_DEV_IRQ_GUEST_MSIX   (1 << 10)
+
+It is not valid to specify multiple types per host or guest IRQ. However, the
+IRQ type of host and guest can differ or can even be null.
+
+4.50 KVM_DEASSIGN_DEV_IRQ
+
+Capability: KVM_CAP_ASSIGN_DEV_IRQ
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_irq (in)
+Returns: 0 on success, -1 on error
+
+Ends an IRQ assignment to a passed-through device.
+
+See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified
+by assigned_dev_id, flags must correspond to the IRQ type specified on
+KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed.
+
+4.51 KVM_SET_GSI_ROUTING
+
+Capability: KVM_CAP_IRQ_ROUTING
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_irq_routing (in)
+Returns: 0 on success, -1 on error
+
+Sets the GSI routing table entries, overwriting any previously set entries.
+
+struct kvm_irq_routing {
+	__u32 nr;
+	__u32 flags;
+	struct kvm_irq_routing_entry entries[0];
+};
+
+No flags are specified so far, the corresponding field must be set to zero.
+
+struct kvm_irq_routing_entry {
+	__u32 gsi;
+	__u32 type;
+	__u32 flags;
+	__u32 pad;
+	union {
+		struct kvm_irq_routing_irqchip irqchip;
+		struct kvm_irq_routing_msi msi;
+		__u32 pad[8];
+	} u;
+};
+
+/* gsi routing entry types */
+#define KVM_IRQ_ROUTING_IRQCHIP 1
+#define KVM_IRQ_ROUTING_MSI 2
+
+No flags are specified so far, the corresponding field must be set to zero.
+
+struct kvm_irq_routing_irqchip {
+	__u32 irqchip;
+	__u32 pin;
+};
+
+struct kvm_irq_routing_msi {
+	__u32 address_lo;
+	__u32 address_hi;
+	__u32 data;
+	__u32 pad;
+};
+
+4.52 KVM_ASSIGN_SET_MSIX_NR
+
+Capability: KVM_CAP_DEVICE_MSIX
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_msix_nr (in)
+Returns: 0 on success, -1 on error
+
+Set the number of MSI-X interrupts for an assigned device. This service can
+only be called once in the lifetime of an assigned device.
+
+struct kvm_assigned_msix_nr {
+	__u32 assigned_dev_id;
+	__u16 entry_nr;
+	__u16 padding;
+};
+
+#define KVM_MAX_MSIX_PER_DEV		256
+
+4.53 KVM_ASSIGN_SET_MSIX_ENTRY
+
+Capability: KVM_CAP_DEVICE_MSIX
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_msix_entry (in)
+Returns: 0 on success, -1 on error
+
+Specifies the routing of an MSI-X assigned device interrupt to a GSI. Setting
+the GSI vector to zero means disabling the interrupt.
+
+struct kvm_assigned_msix_entry {
+	__u32 assigned_dev_id;
+	__u32 gsi;
+	__u16 entry; /* The index of entry in the MSI-X table */
+	__u16 padding[3];
+};
+
 5. The kvm_run structure
 
 Application code obtains a pointer to the kvm_run structure by
diff --git a/Documentation/kvm/cpuid.txt b/Documentation/kvm/cpuid.txt
index 14a12ea..8820685 100644
--- a/Documentation/kvm/cpuid.txt
+++ b/Documentation/kvm/cpuid.txt
@@ -36,6 +36,9 @@ KVM_FEATURE_MMU_OP                 ||     2 || deprecated.
 KVM_FEATURE_CLOCKSOURCE2           ||     3 || kvmclock available at msrs
                                    ||       || 0x4b564d00 and 0x4b564d01
 ------------------------------------------------------------------------------
+KVM_FEATURE_ASYNC_PF               ||     4 || async pf can be enabled by
+                                   ||       || writing to msr 0x4b564d02
+------------------------------------------------------------------------------
 KVM_FEATURE_CLOCKSOURCE_STABLE_BIT ||    24 || host will warn if no guest-side
                                    ||       || per-cpu warps are expected in
                                    ||       || kvmclock.
diff --git a/Documentation/kvm/msr.txt b/Documentation/kvm/msr.txt
index 8ddcfe8..d079aed 100644
--- a/Documentation/kvm/msr.txt
+++ b/Documentation/kvm/msr.txt
@@ -3,7 +3,6 @@ Glauber Costa <glommer@redhat.com>, Red Hat Inc, 2010
 =====================================================
 
 KVM makes use of some custom MSRs to service some requests.
-At present, this facility is only used by kvmclock.
 
 Custom MSRs have a range reserved for them, that goes from
 0x4b564d00 to 0x4b564dff. There are MSRs outside this area,
@@ -151,3 +150,38 @@ MSR_KVM_SYSTEM_TIME: 0x12
 			return PRESENT;
 		} else
 			return NON_PRESENT;
+
+MSR_KVM_ASYNC_PF_EN: 0x4b564d02
+	data: Bits 63-6 hold 64-byte aligned physical address of a
+	64 byte memory area which must be in guest RAM and must be
+	zeroed. Bits 5-2 are reserved and should be zero. Bit 0 is 1
+	when asynchronous page faults are enabled on the vcpu 0 when
+	disabled. Bit 2 is 1 if asynchronous page faults can be injected
+	when vcpu is in cpl == 0.
+
+	First 4 byte of 64 byte memory location will be written to by
+	the hypervisor at the time of asynchronous page fault (APF)
+	injection to indicate type of asynchronous page fault. Value
+	of 1 means that the page referred to by the page fault is not
+	present. Value 2 means that the page is now available. Disabling
+	interrupt inhibits APFs. Guest must not enable interrupt
+	before the reason is read, or it may be overwritten by another
+	APF. Since APF uses the same exception vector as regular page
+	fault guest must reset the reason to 0 before it does
+	something that can generate normal page fault.  If during page
+	fault APF reason is 0 it means that this is regular page
+	fault.
+
+	During delivery of type 1 APF cr2 contains a token that will
+	be used to notify a guest when missing page becomes
+	available. When page becomes available type 2 APF is sent with
+	cr2 set to the token associated with the page. There is special
+	kind of token 0xffffffff which tells vcpu that it should wake
+	up all processes waiting for APFs and no individual type 2 APFs
+	will be sent.
+
+	If APF is disabled while there are outstanding APFs, they will
+	not be delivered.
+
+	Currently type 2 APF will be always delivered on the same vcpu as
+	type 1 was, but guest should not rely on that.