Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine updates from Vinod Koul:
 "Once you have some time from extended weekend celebrations please
  consider pulling the following to get:
   - Various fixes and PCI driver for dw_dmac by Andy
   - DT binding for imx-dma by Markus & imx-sdma by Shawn
   - DT fixes for dmaengine by Lars
   - jz4740 dmac driver by Lars
   - and various fixes across the drivers"

What "extended weekend celebrations"?  I'm in the merge window, who has
time for extended celebrations..

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits)
  DMA: shdma: add DT support
  DMA: shdma: shdma_chan_filter() has to be in shdma-base.h
  DMA: shdma: (cosmetic) don't re-calculate a pointer
  dmaengine: at_hdmac: prepare clk before calling enable
  dmaengine/trivial: at_hdmac: add curly brackets to if/else expressions
  dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors()
  dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding
  ARM: at91: dt: add header to define at_hdmac configuration
  MIPS: jz4740: Correct clock gate bit for DMA controller
  MIPS: jz4740: Remove custom DMA API
  MIPS: jz4740: Register jz4740 DMA device
  dma: Add a jz4740 dmaengine driver
  MIPS: jz4740: Acquire and enable DMA controller clock
  dma: mmp_tdma: disable irq when disabling dma channel
  dmaengine: PL08x: Avoid collisions with get_signal() macro
  dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically
  dma: dw: add PCI part of the driver
  dma: dw: split driver to library part and platform code
  dma: move dw_dmac driver to an own directory
  dw_dmac: don't check resource with devm_ioremap_resource
  ...

4 files changed, 184 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
index c80e8a3..c280a0e 100644
--- a/Documentation/devicetree/bindings/dma/atmel-dma.txt
+++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
@@ -24,8 +24,11 @@ The three cells in order are:
 1. A phandle pointing to the DMA controller.
 2. The memory interface (16 most significant bits), the peripheral interface
 (16 less significant bits).
-3. The peripheral identifier for the hardware handshaking interface. The
-identifier can be different for tx and rx.
+3. Parameters for the at91 DMA configuration register which are device
+dependant:
+  - bit 7-0: peripheral identifier for the hardware handshaking interface. The
+  identifier can be different for tx and rx.
+  - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
new file mode 100644
index 0000000..2717ecb
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
@@ -0,0 +1,48 @@
+* Freescale Direct Memory Access (DMA) Controller for i.MX
+
+This document will only describe differences to the generic DMA Controller and
+DMA request bindings as described in dma/dma.txt .
+
+* DMA controller
+
+Required properties:
+- compatible : Should be "fsl,<chip>-dma". chip can be imx1, imx21 or imx27
+- reg : Should contain DMA registers location and length
+- interrupts : First item should be DMA interrupt, second one is optional and
+    should contain DMA Error interrupt
+- #dma-cells : Has to be 1. imx-dma does not support anything else.
+
+Optional properties:
+- #dma-channels : Number of DMA channels supported. Should be 16.
+- #dma-requests : Number of DMA requests supported.
+
+Example:
+
+	dma: dma@10001000 {
+		compatible = "fsl,imx27-dma";
+		reg = <0x10001000 0x1000>;
+		interrupts = <32 33>;
+		#dma-cells = <1>;
+		#dma-channels = <16>;
+	};
+
+
+* DMA client
+
+Clients have to specify the DMA requests with phandles in a list.
+
+Required properties:
+- dmas: List of one or more DMA request specifiers. One DMA request specifier
+    consists of a phandle to the DMA controller followed by the integer
+    specifiying the request line.
+- dma-names: List of string identifiers for the DMA requests. For the correct
+    names, have a look at the specific client driver.
+
+Example:
+
+	sdhci1: sdhci@10013000 {
+		...
+		dmas = <&dma 7>;
+		dma-names = "rx-tx";
+		...
+	};
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index d1e3f44..68cee4f5 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -4,14 +4,70 @@ Required properties:
 - compatible : Should be "fsl,<chip>-sdma"
 - reg : Should contain SDMA registers location and length
 - interrupts : Should contain SDMA interrupt
+- #dma-cells : Must be <3>.
+  The first cell specifies the DMA request/event ID.  See details below
+  about the second and third cell.
 - fsl,sdma-ram-script-name : Should contain the full path of SDMA RAM
   scripts firmware
 
+The second cell of dma phandle specifies the peripheral type of DMA transfer.
+The full ID of peripheral types can be found below.
+
+	ID	transfer type
+	---------------------
+	0	MCU domain SSI
+	1	Shared SSI
+	2	MMC
+	3	SDHC
+	4	MCU domain UART
+	5	Shared UART
+	6	FIRI
+	7	MCU domain CSPI
+	8	Shared CSPI
+	9	SIM
+	10	ATA
+	11	CCM
+	12	External peripheral
+	13	Memory Stick Host Controller
+	14	Shared Memory Stick Host Controller
+	15	DSP
+	16	Memory
+	17	FIFO type Memory
+	18	SPDIF
+	19	IPU Memory
+	20	ASRC
+	21	ESAI
+
+The third cell specifies the transfer priority as below.
+
+	ID	transfer priority
+	-------------------------
+	0	High
+	1	Medium
+	2	Low
+
 Examples:
 
 sdma@83fb0000 {
 	compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 	reg = <0x83fb0000 0x4000>;
 	interrupts = <6>;
+	#dma-cells = <3>;
 	fsl,sdma-ram-script-name = "sdma-imx51.bin";
 };
+
+DMA clients connected to the i.MX SDMA controller must use the format
+described in the dma.txt file.
+
+Examples:
+
+ssi2: ssi@70014000 {
+	compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+	reg = <0x70014000 0x4000>;
+	interrupts = <30>;
+	clocks = <&clks 49>;
+	dmas = <&sdma 24 1 0>,
+	       <&sdma 25 1 0>;
+	dma-names = "rx", "tx";
+	fsl,fifo-depth = <15>;
+};
diff --git a/Documentation/devicetree/bindings/dma/shdma.txt b/Documentation/devicetree/bindings/dma/shdma.txt
new file mode 100644
index 0000000..c15994a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/shdma.txt
@@ -0,0 +1,75 @@
+* SHDMA Device Tree bindings
+
+Sh-/r-mobile and r-car systems often have multiple identical DMA controller
+instances, capable of serving any of a common set of DMA slave devices, using
+the same configuration. To describe this topology we require all compatible
+SHDMA DT nodes to be placed under a DMA multiplexer node. All such compatible
+DMAC instances have the same number of channels and use the same DMA
+descriptors. Therefore respective DMA DT bindings can also all be placed in the
+multiplexer node. Even if there is only one such DMAC instance on a system, it
+still has to be placed under such a multiplexer node.
+
+* DMA multiplexer
+
+Required properties:
+- compatible:	should be "renesas,shdma-mux"
+- #dma-cells:	should be <1>, see "dmas" property below
+
+Optional properties (currently unused):
+- dma-channels:	number of DMA channels
+- dma-requests:	number of DMA request signals
+
+* DMA controller
+
+Required properties:
+- compatible:	should be "renesas,shdma"
+
+Example:
+	dmac: dma-mux0 {
+		compatible = "renesas,shdma-mux";
+		#dma-cells = <1>;
+		dma-channels = <6>;
+		dma-requests = <256>;
+		reg = <0 0>;	/* Needed for AUXDATA */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma0: shdma@fe008020 {
+			compatible = "renesas,shdma";
+			reg = <0xfe008020 0x270>,
+				<0xfe009000 0xc>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 34 4
+					0 28 4
+					0 29 4
+					0 30 4
+					0 31 4
+					0 32 4
+					0 33 4>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5";
+		};
+
+		dma1: shdma@fe018020 {
+			...
+		};
+
+		dma2: shdma@fe028020 {
+			...
+		};
+	};
+
+* DMA client
+
+Required properties:
+- dmas:		a list of <[DMA multiplexer phandle] [MID/RID value]> pairs,
+		where MID/RID values are fixed handles, specified in the SoC
+		manual
+- dma-names:	a list of DMA channel names, one per "dmas" entry
+
+Example:
+	dmas = <&dmac 0xd1
+		&dmac 0xd2>;
+	dma-names = "tx", "rx";