Merge tag 'v3.2-rc7' into staging/for_v3.3

Linux 3.2-rc7

* tag 'v3.2-rc7': (1304 commits)
  Linux 3.2-rc7
  netfilter: xt_connbytes: handle negation correctly
  Btrfs: call d_instantiate after all ops are setup
  Btrfs: fix worker lock misuse in find_worker
  net: relax rcvbuf limits
  rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt()
  net: introduce DST_NOPEER dst flag
  mqprio: Avoid panic if no options are provided
  bridge: provide a mtu() method for fake_dst_ops
  md/bitmap: It is OK to clear bits during recovery.
  md: don't give up looking for spares on first failure-to-add
  md/raid5: ensure correct assessment of drives during degraded reshape.
  md/linear: fix hot-add of devices to linear arrays.
  sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().
  pata_of_platform: Add missing CONFIG_OF_IRQ dependency.
  ipv4: using prefetch requires including prefetch.h
  VFS: Fix race between CPU hotplug and lglocks
  vfs: __read_cache_page should use gfp argument rather than GFP_KERNEL
  USB: Fix usb/isp1760 build on sparc
  net: Add a flow_cache_flush_deferred function
  ...

Conflicts:
	drivers/media/common/tuners/tda18218.c
	drivers/media/video/omap3isp/ispccdc.c
	drivers/staging/media/as102/as102_drv.h

15 files changed, 155 insertions, 128 deletions

diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index 2b5d561..c1eb41c 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -206,16 +206,3 @@ Description:
 		when a discarded area is read the discard_zeroes_data
 		parameter will be set to one. Otherwise it will be 0 and
 		the result of reading a discarded area is undefined.
-What:		/sys/block/<disk>/alias
-Date:		Aug 2011
-Contact:	Nao Nishijima <nao.nishijima.xt@hitachi.com>
-Description:
-		A raw device name of a disk does not always point a same disk
-		each boot-up time. Therefore, users have to use persistent
-		device names, which udev creates when the kernel finds a disk,
-		instead of raw device name. However, kernel doesn't show those
-		persistent names on its messages (e.g. dmesg).
-		This file can store an alias of the disk and it would be
-		appeared in kernel messages if it is set. A disk can have an
-		alias which length is up to 255bytes. Users can use alphabets,
-		numbers, "-" and "_" in alias name. This file is writeonce.
diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd
index fa72ccb..dbedafb 100644
--- a/Documentation/ABI/testing/sysfs-bus-rbd
+++ b/Documentation/ABI/testing/sysfs-bus-rbd
@@ -57,13 +57,6 @@ create_snap
 
 	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
 
-rollback_snap
-
-	Rolls back data to the specified snapshot. This goes over the entire
-	list of rados blocks and sends a rollback command to each.
-
-	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
-
 snap_*
 
 	A directory per each snapshot
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index 54883de..ac3d001 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -521,6 +521,11 @@ Here's a description of the fields of <varname>struct uio_mem</varname>:
 
 <itemizedlist>
 <listitem><para>
+<varname>const char *name</varname>: Optional. Set this to help identify
+the memory region, it will show up in the corresponding sysfs node.
+</para></listitem>
+
+<listitem><para>
 <varname>int memtype</varname>: Required if the mapping is used. Set this to
 <varname>UIO_MEM_PHYS</varname> if you you have physical memory on your
 card to be mapped. Use <varname>UIO_MEM_LOGICAL</varname> for logical
@@ -553,7 +558,7 @@ instead to remember such an address.
 </itemizedlist>
 
 <para>
-Please do not touch the <varname>kobj</varname> element of
+Please do not touch the <varname>map</varname> element of
 <varname>struct uio_mem</varname>! It is used by the UIO framework
 to set up sysfs files for this mapping. Simply leave it alone.
 </para>
diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt
index 71464e0..b79d0a1 100644
--- a/Documentation/blockdev/cciss.txt
+++ b/Documentation/blockdev/cciss.txt
@@ -98,14 +98,12 @@ You must enable "SCSI tape drive support for Smart Array 5xxx" and
 "SCSI support" in your kernel configuration to be able to use SCSI
 tape drives with your Smart Array 5xxx controller.
 
-Additionally, note that the driver will not engage the SCSI core at init 
-time.  The driver must be directed to dynamically engage the SCSI core via 
-the /proc filesystem entry which the "block" side of the driver creates as 
-/proc/driver/cciss/cciss* at runtime.  This is because at driver init time, 
-the SCSI core may not yet be initialized (because the driver is a block 
-driver) and attempting to register it with the SCSI core in such a case 
-would cause a hang.  This is best done via an initialization script 
-(typically in /etc/init.d, but could vary depending on distribution). 
+Additionally, note that the driver will engage the SCSI core at init
+time if any tape drives or medium changers are detected.  The driver may
+also be directed to dynamically engage the SCSI core via the /proc filesystem
+entry which the "block" side of the driver creates as
+/proc/driver/cciss/cciss* at runtime.  This is best done via a script.
+
 For example:
 
 	for x in /proc/driver/cciss/cciss[0-9]*
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index e855278..874921e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -33,6 +33,7 @@ qcom	Qualcomm, Inc.
 ramtron	Ramtron International
 samsung	Samsung Semiconductor
 schindler	Schindler
+sil	Silicon Image
 simtek
 sirf	SiRF Technology, Inc.
 stericsson	ST-Ericsson
diff --git a/Documentation/filesystems/btrfs.txt b/Documentation/filesystems/btrfs.txt
index 64087c3..7671352 100644
--- a/Documentation/filesystems/btrfs.txt
+++ b/Documentation/filesystems/btrfs.txt
@@ -63,8 +63,8 @@ IRC network.
 Userspace tools for creating and manipulating Btrfs file systems are
 available from the git repository at the following location:
 
- http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs-unstable.git
- git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs-unstable.git
+ http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs.git
+ git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs.git
 
 These include the following tools:
 
diff --git a/Documentation/i2c/ten-bit-addresses b/Documentation/i2c/ten-bit-addresses
index e989070..cdfe139 100644
--- a/Documentation/i2c/ten-bit-addresses
+++ b/Documentation/i2c/ten-bit-addresses
@@ -1,22 +1,24 @@
 The I2C protocol knows about two kinds of device addresses: normal 7 bit
 addresses, and an extended set of 10 bit addresses. The sets of addresses
 do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
-address 0x10 (though a single device could respond to both of them). You
-select a 10 bit address by adding an extra byte after the address
-byte:
-  S Addr7 Rd/Wr ....
-becomes
-  S 11110 Addr10 Rd/Wr
-S is the start bit, Rd/Wr the read/write bit, and if you count the number
-of bits, you will see the there are 8 after the S bit for 7 bit addresses,
-and 16 after the S bit for 10 bit addresses.
+address 0x10 (though a single device could respond to both of them).
 
-WARNING! The current 10 bit address support is EXPERIMENTAL. There are
-several places in the code that will cause SEVERE PROBLEMS with 10 bit
-addresses, even though there is some basic handling and hooks. Also,
-almost no supported adapter handles the 10 bit addresses correctly.
+I2C messages to and from 10-bit address devices have a different format.
+See the I2C specification for the details.
 
-As soon as a real 10 bit address device is spotted 'in the wild', we
-can and will add proper support. Right now, 10 bit address devices
-are defined by the I2C protocol, but we have never seen a single device
-which supports them.
+The current 10 bit address support is minimal. It should work, however
+you can expect some problems along the way:
+* Not all bus drivers support 10-bit addresses. Some don't because the
+  hardware doesn't support them (SMBus doesn't require 10-bit address
+  support for example), some don't because nobody bothered adding the
+  code (or it's there but not working properly.) Software implementation
+  (i2c-algo-bit) is known to work.
+* Some optional features do not support 10-bit addresses. This is the
+  case of automatic detection and instantiation of devices by their,
+  drivers, for example.
+* Many user-space packages (for example i2c-tools) lack support for
+  10-bit addresses.
+
+Note that 10-bit address devices are still pretty rare, so the limitations
+listed above could stay for a long time, maybe even forever if nobody
+needs them to be fixed.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a0c5c5f..81c287f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -315,12 +315,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			CPU-intensive style benchmark, and it can vary highly in
 			a microbenchmark depending on workload and compiler.
 
-			1: only for 32-bit processes
-			2: only for 64-bit processes
+			32: only for 32-bit processes
+			64: only for 64-bit processes
 			on: enable for both 32- and 64-bit processes
 			off: disable for both 32- and 64-bit processes
 
-	amd_iommu=	[HW,X86-84]
+	amd_iommu=	[HW,X86-64]
 			Pass parameters to the AMD IOMMU driver in the system.
 			Possible values are:
 			fullflush - enable flushing of IO/TLB entries when
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index cb7f314..589f2da 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -20,7 +20,7 @@ ip_no_pmtu_disc - BOOLEAN
 	default FALSE
 
 min_pmtu - INTEGER
-	default 562 - minimum discovered Path MTU
+	default 552 - minimum discovered Path MTU
 
 route/max_size - INTEGER
 	Maximum number of routes allowed in the kernel.  Increase
@@ -282,11 +282,11 @@ tcp_max_ssthresh - INTEGER
 	Default: 0 (off)
 
 tcp_max_syn_backlog - INTEGER
-	Maximal number of remembered connection requests, which are
-	still did not receive an acknowledgment from connecting client.
-	Default value is 1024 for systems with more than 128Mb of memory,
-	and 128 for low memory machines. If server suffers of overload,
-	try to increase this number.
+	Maximal number of remembered connection requests, which have not
+	received an acknowledgment from connecting client.
+	The minimal value is 128 for low memory machines, and it will
+	increase in proportion to the memory of machine.
+	If server suffers from overload, try increasing this number.
 
 tcp_max_tw_buckets - INTEGER
 	Maximal number of timewait sockets held by system simultaneously.
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 646a89e..3139fb5 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -123,9 +123,10 @@ please refer directly to the source code for more information about it.
 Subsystem-Level Methods
 -----------------------
 The core methods to suspend and resume devices reside in struct dev_pm_ops
-pointed to by the pm member of struct bus_type, struct device_type and
-struct class.  They are mostly of interest to the people writing infrastructure
-for buses, like PCI or USB, or device type and device class drivers.
+pointed to by the ops member of struct dev_pm_domain, or by the pm member of
+struct bus_type, struct device_type and struct class.  They are mostly of
+interest to the people writing infrastructure for platforms and buses, like PCI
+or USB, or device type and device class drivers.
 
 Bus drivers implement these methods as appropriate for the hardware and the
 drivers using it; PCI works differently from USB, and so on.  Not many people
@@ -139,41 +140,57 @@ sequencing in the driver model tree.
 
 /sys/devices/.../power/wakeup files
 -----------------------------------
-All devices in the driver model have two flags to control handling of wakeup
-events (hardware signals that can force the device and/or system out of a low
-power state).  These flags are initialized by bus or device driver code using
+All device objects in the driver model contain fields that control the handling
+of system wakeup events (hardware signals that can force the system out of a
+sleep state).  These fields are initialized by bus or device driver code using
 device_set_wakeup_capable() and device_set_wakeup_enable(), defined in
 include/linux/pm_wakeup.h.
 
-The "can_wakeup" flag just records whether the device (and its driver) can
+The "power.can_wakeup" flag just records whether the device (and its driver) can
 physically support wakeup events.  The device_set_wakeup_capable() routine
-affects this flag.  The "should_wakeup" flag controls whether the device should
-try to use its wakeup mechanism.  device_set_wakeup_enable() affects this flag;
-for the most part drivers should not change its value.  The initial value of
-should_wakeup is supposed to be false for the majority of devices; the major
-exceptions are power buttons, keyboards, and Ethernet adapters whose WoL
-(wake-on-LAN) feature has been set up with ethtool.  It should also default
-to true for devices that don't generate wakeup requests on their own but merely
-forward wakeup requests from one bus to another (like PCI bridges).
+affects this flag.  The "power.wakeup" field is a pointer to an object of type
+struct wakeup_source used for controlling whether or not the device should use
+its system wakeup mechanism and for notifying the PM core of system wakeup
+events signaled by the device.  This object is only present for wakeup-capable
+devices (i.e. devices whose "can_wakeup" flags are set) and is created (or
+removed) by device_set_wakeup_capable().
 
 Whether or not a device is capable of issuing wakeup events is a hardware
 matter, and the kernel is responsible for keeping track of it.  By contrast,
 whether or not a wakeup-capable device should issue wakeup events is a policy
 decision, and it is managed by user space through a sysfs attribute: the
-power/wakeup file.  User space can write the strings "enabled" or "disabled" to
-set or clear the "should_wakeup" flag, respectively.  This file is only present
-for wakeup-capable devices (i.e. devices whose "can_wakeup" flags are set)
-and is created (or removed) by device_set_wakeup_capable().  Reads from the
-file will return the corresponding string.
-
-The device_may_wakeup() routine returns true only if both flags are set.
+"power/wakeup" file.  User space can write the strings "enabled" or "disabled"
+to it to indicate whether or not, respectively, the device is supposed to signal
+system wakeup.  This file is only present if the "power.wakeup" object exists
+for the given device and is created (or removed) along with that object, by
+device_set_wakeup_capable().  Reads from the file will return the corresponding
+string.
+
+The "power/wakeup" file is supposed to contain the "disabled" string initially
+for the majority of devices; the major exceptions are power buttons, keyboards,
+and Ethernet adapters whose WoL (wake-on-LAN) feature has been set up with
+ethtool.  It should also default to "enabled" for devices that don't generate
+wakeup requests on their own but merely forward wakeup requests from one bus to
+another (like PCI Express ports).
+
+The device_may_wakeup() routine returns true only if the "power.wakeup" object
+exists and the corresponding "power/wakeup" file contains the string "enabled".
 This information is used by subsystems, like the PCI bus type code, to see
 whether or not to enable the devices' wakeup mechanisms.  If device wakeup
 mechanisms are enabled or disabled directly by drivers, they also should use
 device_may_wakeup() to decide what to do during a system sleep transition.
-However for runtime power management, wakeup events should be enabled whenever
-the device and driver both support them, regardless of the should_wakeup flag.
-
+Device drivers, however, are not supposed to call device_set_wakeup_enable()
+directly in any case.
+
+It ought to be noted that system wakeup is conceptually different from "remote
+wakeup" used by runtime power management, although it may be supported by the
+same physical mechanism.  Remote wakeup is a feature allowing devices in
+low-power states to trigger specific interrupts to signal conditions in which
+they should be put into the full-power state.  Those interrupts may or may not
+be used to signal system wakeup events, depending on the hardware design.  On
+some systems it is impossible to trigger them from system sleep states.  In any
+case, remote wakeup should always be enabled for runtime power management for
+all devices and drivers that support it.
 
 /sys/devices/.../power/control files
 ------------------------------------
@@ -249,20 +266,31 @@ for every device before the next phase begins.  Not all busses or classes
 support all these callbacks and not all drivers use all the callbacks.  The
 various phases always run after tasks have been frozen and before they are
 unfrozen.  Furthermore, the *_noirq phases run at a time when IRQ handlers have
-been disabled (except for those marked with the IRQ_WAKEUP flag).
-
-All phases use bus, type, or class callbacks (that is, methods defined in
-dev->bus->pm, dev->type->pm, or dev->class->pm).  These callbacks are mutually
-exclusive, so if the device type provides a struct dev_pm_ops object pointed to
-by its pm field (i.e. both dev->type and dev->type->pm are defined), the
-callbacks included in that object (i.e. dev->type->pm) will be used.  Otherwise,
-if the class provides a struct dev_pm_ops object pointed to by its pm field
-(i.e. both dev->class and dev->class->pm are defined), the PM core will use the
-callbacks from that object (i.e. dev->class->pm).  Finally, if the pm fields of
-both the device type and class objects are NULL (or those objects do not exist),
-the callbacks provided by the bus (that is, the callbacks from dev->bus->pm)
-will be used (this allows device types to override callbacks provided by bus
-types or classes if necessary).
+been disabled (except for those marked with the IRQF_NO_SUSPEND flag).
+
+All phases use PM domain, bus, type, or class callbacks (that is, methods
+defined in dev->pm_domain->ops, dev->bus->pm, dev->type->pm, or dev->class->pm).
+These callbacks are regarded by the PM core as mutually exclusive.  Moreover,
+PM domain callbacks always take precedence over bus, type and class callbacks,
+while type callbacks take precedence over bus and class callbacks, and class
+callbacks take precedence over bus callbacks.  To be precise, the following
+rules are used to determine which callback to execute in the given phase:
+
+    1.	If dev->pm_domain is present, the PM core will attempt to execute the
+	callback included in dev->pm_domain->ops.  If that callback is not
+	present, no action will be carried out for the given device.
+
+    2.	Otherwise, if both dev->type and dev->type->pm are present, the callback
+	included in dev->type->pm will be executed.
+
+    3.	Otherwise, if both dev->class and dev->class->pm are present, the
+	callback included in dev->class->pm will be executed.
+
+    4.	Otherwise, if both dev->bus and dev->bus->pm are present, the callback
+	included in dev->bus->pm will be executed.
+
+This allows PM domains and device types to override callbacks provided by bus
+types or device classes if necessary.
 
 These callbacks may in turn invoke device- or driver-specific methods stored in
 dev->driver->pm, but they don't have to.
@@ -283,9 +311,8 @@ When the system goes into the standby or memory sleep state, the phases are:
 
 	After the prepare callback method returns, no new children may be
 	registered below the device.  The method may also prepare the device or
-	driver in some way for the upcoming system power transition (for
-	example, by allocating additional memory required for this purpose), but
-	it should not put the device into a low-power state.
+	driver in some way for the upcoming system power transition, but it
+	should not put the device into a low-power state.
 
     2.	The suspend methods should quiesce the device to stop it from performing
 	I/O.  They also may save the device registers and put it into the
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 5336149..c2ae8bf 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -44,25 +44,33 @@ struct dev_pm_ops {
 };
 
 The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks
-are executed by the PM core for either the power domain, or the device type
-(if the device power domain's struct dev_pm_ops does not exist), or the class
-(if the device power domain's and type's struct dev_pm_ops object does not
-exist), or the bus type (if the device power domain's, type's and class'
-struct dev_pm_ops objects do not exist) of the given device, so the priority
-order of callbacks from high to low is that power domain callbacks, device
-type callbacks, class callbacks and bus type callbacks, and the high priority
-one will take precedence over low priority one. The bus type, device type and
-class callbacks are referred to as subsystem-level callbacks in what follows,
-and generally speaking, the power domain callbacks are used for representing
-power domains within a SoC.
+are executed by the PM core for the device's subsystem that may be either of
+the following:
+
+  1. PM domain of the device, if the device's PM domain object, dev->pm_domain,
+     is present.
+
+  2. Device type of the device, if both dev->type and dev->type->pm are present.
+
+  3. Device class of the device, if both dev->class and dev->class->pm are
+     present.
+
+  4. Bus type of the device, if both dev->bus and dev->bus->pm are present.
+
+The PM core always checks which callback to use in the order given above, so the
+priority order of callbacks from high to low is: PM domain, device type, class
+and bus type.  Moreover, the high-priority one will always take precedence over
+a low-priority one.  The PM domain, bus type, device type and class callbacks
+are referred to as subsystem-level callbacks in what follows.
 
 By default, the callbacks are always invoked in process context with interrupts
 enabled.  However, subsystems can use the pm_runtime_irq_safe() helper function
-to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume()
-callbacks should be invoked in atomic context with interrupts disabled.
-This implies that these callback routines must not block or sleep, but it also
-means that the synchronous helper functions listed at the end of Section 4 can
-be used within an interrupt handler or in an atomic context.
+to tell the PM core that their ->runtime_suspend(), ->runtime_resume() and
+->runtime_idle() callbacks may be invoked in atomic context with interrupts
+disabled for a given device.  This implies that the callback routines in
+question must not block or sleep, but it also means that the synchronous helper
+functions listed at the end of Section 4 may be used for that device within an
+interrupt handler or generally in an atomic context.
 
 The subsystem-level suspend callback is _entirely_ _responsible_ for handling
 the suspend of the device as appropriate, which may, but need not include
diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt
index 079cb3d..41c8378 100644
--- a/Documentation/serial/serial-rs485.txt
+++ b/Documentation/serial/serial-rs485.txt
@@ -97,15 +97,23 @@
 
 	struct serial_rs485 rs485conf;
 
-	/* Set RS485 mode: */
+	/* Enable RS485 mode: */
 	rs485conf.flags |= SER_RS485_ENABLED;
 
+	/* Set logical level for RTS pin equal to 1 when sending: */
+	rs485conf.flags |= SER_RS485_RTS_ON_SEND;
+	/* or, set logical level for RTS pin equal to 0 when sending: */
+	rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND);
+
+	/* Set logical level for RTS pin equal to 1 after sending: */
+	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
+	/* or, set logical level for RTS pin equal to 0 after sending: */
+	rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND);
+
 	/* Set rts delay before send, if needed: */
-	rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
 	rs485conf.delay_rts_before_send = ...;
 
 	/* Set rts delay after send, if needed: */
-	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
 	rs485conf.delay_rts_after_send = ...;
 
 	/* Set this flag if you want to receive data even whilst sending data */
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 03e2771..91fee3b 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -579,7 +579,7 @@ Development Tree
 ~~~~~~~~~~~~~~~~
 The latest development codes for HD-audio are found on sound git tree:
 
-- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 
 The master branch or for-next branches can be used as the main
 development branches in general while the HD-audio specific patches
@@ -594,7 +594,7 @@ is, installed via the usual spells: configure, make and make
 install(-modules).  See INSTALL in the package.  The snapshot tarballs
 are found at:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
+- ftp://ftp.suse.com/pub/people/tiwai/snapshot/
 
 
 Sending a Bug Report
@@ -696,7 +696,7 @@ via hda-verb won't change the mixer value.
 
 The hda-verb program is found in the ftp directory:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
 
 Also a git repository is available:
 
@@ -764,7 +764,7 @@ operation, the jack plugging simulation, etc.
 
 The package is found in:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
 
 A git repository is available:
 
diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt
index 3e2ec9c..d50c14d 100644
--- a/Documentation/sound/alsa/soc/machine.txt
+++ b/Documentation/sound/alsa/soc/machine.txt
@@ -50,8 +50,7 @@ Machine DAI Configuration
 The machine DAI configuration glues all the codec and CPU DAIs together. It can
 also be used to set up the DAI system clock and for any machine related DAI
 initialisation e.g. the machine audio map can be connected to the codec audio
-map, unconnected codec pins can be set as such. Please see corgi.c, spitz.c
-for examples.
+map, unconnected codec pins can be set as such.
 
 struct snd_soc_dai_link is used to set up each DAI in your machine. e.g.
 
@@ -83,8 +82,7 @@ Machine Power Map
 The machine driver can optionally extend the codec power map and to become an
 audio power map of the audio subsystem. This allows for automatic power up/down
 of speaker/HP amplifiers, etc. Codec pins can be connected to the machines jack
-sockets in the machine init function. See soc/pxa/spitz.c and dapm.txt for
-details.
+sockets in the machine init function.
 
 
 Machine Controls
diff --git a/Documentation/usb/linux-cdc-acm.inf b/Documentation/usb/linux-cdc-acm.inf
index 37a02ce..f0ffc27 100644
--- a/Documentation/usb/linux-cdc-acm.inf
+++ b/Documentation/usb/linux-cdc-acm.inf
@@ -90,10 +90,10 @@ ServiceBinary=%12%\USBSER.sys
 [SourceDisksFiles]
 [SourceDisksNames]
 [DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00
 
 [DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00
 
 
 ;------------------------------------------------------------------------------