Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

9 files changed, 59 insertions, 19 deletions

diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index b8e8646..b462bb1 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -316,12 +316,10 @@ reduce current DMA mapping usage or delay and try again later).
 	pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
 		int nents, int direction)
 
-Maps a scatter gather list from the block layer.
-
 Returns: the number of physical segments mapped (this may be shorter
-than <nents> passed in if the block layer determines that some
-elements of the scatter/gather list are physically adjacent and thus
-may be mapped with a single entry).
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
 
 Please note that the sg cannot be mapped again if it has been mapped once.
 The mapping process is allowed to destroy information in the sg.
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index 6c442d8..4f3f384 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -23,6 +23,7 @@ Contents:
 1.3 sparc64
 1.4 ppc
 1.5 SuperH
+1.6 Blackfin
 
 2. "Policy" / "Governor"?
 2.1 Policy
@@ -97,6 +98,17 @@ The following SuperH processors are supported by cpufreq:
 SH-3
 SH-4
 
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
 
 2. "Policy" / "Governor" ?
 ==========================
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index 4340cc8..67310fb 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -28,10 +28,7 @@ Manish Singh  <manish.singh@oracle.com>
 Caveats
 =======
 Features which OCFS2 does not support yet:
-	- extended attributes
 	- quotas
-	- cluster aware flock
-	- cluster aware lockf
 	- Directory change notification (F_NOTIFY)
 	- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
 	- POSIX ACLs
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index bcceb99..bb1b0dd 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -44,6 +44,7 @@ Table of Contents
   2.14	/proc/<pid>/io - Display the IO accounting fields
   2.15	/proc/<pid>/coredump_filter - Core dump filtering settings
   2.16	/proc/<pid>/mountinfo - Information about mounts
+  2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
 
 ------------------------------------------------------------------------------
 Preface
@@ -2483,4 +2484,30 @@ For more information on mount propagation see:
 
   Documentation/filesystems/sharedsubtree.txt
 
+2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for  max_user_watches  is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
+
 ------------------------------------------------------------------------------
+
diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
index 62fe9b1..a8273d5 100644
--- a/Documentation/filesystems/ramfs-rootfs-initramfs.txt
+++ b/Documentation/filesystems/ramfs-rootfs-initramfs.txt
@@ -130,12 +130,12 @@ The 2.6 kernel build process always creates a gzipped cpio format initramfs
 archive and links it into the resulting kernel binary.  By default, this
 archive is empty (consuming 134 bytes on x86).
 
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary.  This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary.  This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
 
   dir /dev 755 0 0
   nod /dev/console 644 0 0 c 5 1
diff --git a/Documentation/input/input-programming.txt b/Documentation/input/input-programming.txt
index 81905e8..7f8b9d9 100644
--- a/Documentation/input/input-programming.txt
+++ b/Documentation/input/input-programming.txt
@@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
 
 static struct input_dev *button_dev;
 
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
 {
 	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
 	input_sync(button_dev);
+	return IRQ_HANDLED;
 }
 
 static int __init button_init(void)
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index e0e54a2..3cd2ad9 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1072,10 +1072,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  ref		Reference board
 	  dell-m4-1	Dell desktops
 	  dell-m4-2	Dell desktops
+	  dell-m4-3	Dell desktops
 
 	STAC92HD73*
 	  ref		Reference board
-	  dell-m6	Dell desktops
+	  dell-m6-amic	Dell desktops/laptops with analog mics
+	  dell-m6-dmic	Dell desktops/laptops with digital mics
+	  dell-m6	Dell desktops/laptops with both type of mics
 
 	STAC9872
 	  vaio		Setup for VAIO FE550G/SZ110
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 8bae2f0..0f5122e 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -215,7 +215,7 @@ So for example arch/.../mach-*/board-*.c files might have code like:
 	/* if your mach-* infrastructure doesn't support kernels that can
 	 * run on multiple boards, pdata wouldn't benefit from "__init".
 	 */
-	static struct mysoc_spi_data __init pdata = { ... };
+	static struct mysoc_spi_data __initdata pdata = { ... };
 
 	static __init board_init(void)
 	{
diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/tracers/mmiotrace.txt
index 5bbbe20..cde23b4 100644
--- a/Documentation/tracers/mmiotrace.txt
+++ b/Documentation/tracers/mmiotrace.txt
@@ -37,7 +37,7 @@ $ echo mmiotrace > /debug/tracing/current_tracer
 $ cat /debug/tracing/trace_pipe > mydump.txt &
 Start X or whatever.
 $ echo "X is up" > /debug/tracing/trace_marker
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
 Check for lost events.
 
 
@@ -66,7 +66,7 @@ which action. It is recommended to place descriptive markers about what you
 do.
 
 Shut down mmiotrace (requires root privileges):
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
 The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
 pressing ctrl+c.
 
@@ -81,7 +81,9 @@ are:
 $ cat /debug/tracing/trace_entries
 gives you a number. Approximately double this number and write it back, for
 instance:
+$ echo 0 > /debug/tracing/tracing_enabled
 $ echo 128000 > /debug/tracing/trace_entries
+$ echo 1 > /debug/tracing/tracing_enabled
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also