Merge branch 'fix/misc' into topic/misc

87 files changed, 3257 insertions, 1585 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 7772928..deb6b48 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -144,3 +144,16 @@ Description:
 
 		Write a 1 to force the device to disconnect
 		(equivalent to unplugging a wired USB device).
+
+What:		/sys/bus/usb/drivers/.../remove_id
+Date:		November 2009
+Contact:	CHENG Renquan <rqcheng@smu.edu.sg>
+Description:
+		Writing a device ID to this file will remove an ID
+		that was dynamically added via the new_id sysfs entry.
+		The format for the device ID is:
+		idVendor idProduct.	After successfully
+		removing an ID, the driver will no longer support the
+		device.  This is useful to ensure auto probing won't
+		match the driver to the device.  For example:
+		# echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id
diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
index 4e8106f..25b1e75 100644
--- a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
+++ b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
@@ -23,3 +23,16 @@ Description:
                 Since this relates to security (specifically, the
                 lifetime of PTKs and GTKs) it should not be changed
                 from the default.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_phy_rate
+Date:           August 2009
+KernelVersion:  2.6.32
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The maximum PHY rate to use for all connected devices.
+                This is only of limited use for testing and
+                development as the hardware's automatic rate
+                adaptation is better then this simple control.
+
+                Refer to [ECMA-368] section 10.3.1.1 for the value to
+                use.
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 9fe91c0..bf1627b 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -60,6 +60,19 @@ Description:
 Users:		hotplug memory remove tools
 		https://w3.opensource.ibm.com/projects/powerpc-utils/
 
+
+What:		/sys/devices/system/memoryX/nodeY
+Date:		October 2009
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		When CONFIG_NUMA is enabled, a symbolic link that
+		points to the corresponding NUMA node directory.
+
+		For example, the following symbolic link is created for
+		memory section 9 on node0:
+		/sys/devices/system/memory/memory9/node0 -> ../../node/node0
+
+
 What:		/sys/devices/system/node/nodeX/memoryY
 Date:		September 2008
 Contact:	Gary Hade <garyhade@us.ibm.com>
@@ -70,4 +83,3 @@ Description:
 		memory section directory.  For example, the following symbolic
 		link is created for memory section 9 on node0.
 		/sys/devices/system/node/node0/memory9 -> ../../memory/memory9
-
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index a703b9e..84a710f 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -62,6 +62,35 @@ Description:	CPU topology files that describe kernel limits related to
 		See Documentation/cputopology.txt for more information.
 
 
+What:		/sys/devices/system/cpu/probe
+		/sys/devices/system/cpu/release
+Date:		November 2009
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Dynamic addition and removal of CPU's.  This is not hotplug
+		removal, this is meant complete removal/addition of the CPU
+		from the system.
+
+		probe: writes to this file will dynamically add a CPU to the
+		system.  Information written to the file to add CPU's is
+		architecture specific.
+
+		release: writes to this file dynamically remove a CPU from
+		the system.  Information writtento the file to remove CPU's
+		is architecture specific.
+
+What:		/sys/devices/system/cpu/cpu#/node
+Date:		October 2009
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Discover NUMA node a CPU belongs to
+
+		When CONFIG_NUMA is enabled, a symbolic link that points
+		to the corresponding NUMA node directory.
+
+		For example, the following symlink is created for cpu42
+		in NUMA node 2:
+
+		/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
+
 
 What:		/sys/devices/system/cpu/cpu#/node
 Date:		October 2009
@@ -136,6 +165,24 @@ Description:	Discover cpuidle policy and mechanism
 		See files in Documentation/cpuidle/ for more information.
 
 
+What:		/sys/devices/system/cpu/cpu#/cpufreq/*
+Date:		pre-git history
+Contact:	cpufreq@vger.kernel.org
+Description:	Discover and change clock speed of CPUs
+
+		Clock scaling allows you to change the clock speed of the
+		CPUs on the fly. This is a nice method to save battery
+		power, because the lower the clock speed, the less power
+		the CPU consumes.
+
+		There are many knobs to tweak in this directory.
+
+		See files in Documentation/cpu-freq/ for more information.
+
+		In particular, read Documentation/cpu-freq/user-guide.txt
+		to learn how to control the knobs.
+
+
 What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
 Date:      August 2008
 KernelVersion:	2.6.27
diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab
index 6dcf75e..8b093f8 100644
--- a/Documentation/ABI/testing/sysfs-kernel-slab
+++ b/Documentation/ABI/testing/sysfs-kernel-slab
@@ -45,8 +45,9 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The alloc_fastpath file is read-only and specifies how many
-		objects have been allocated using the fast path.
+		The alloc_fastpath file shows how many objects have been
+		allocated using the fast path.  It can be written to clear the
+		current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/alloc_from_partial
@@ -55,9 +56,10 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The alloc_from_partial file is read-only and specifies how
-		many times a cpu slab has been full and it has been refilled
-		by using a slab from the list of partially used slabs.
+		The alloc_from_partial file shows how many times a cpu slab has
+		been full and it has been refilled by using a slab from the list
+		of partially used slabs.  It can be written to clear the current
+		count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/alloc_refill
@@ -66,9 +68,9 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The alloc_refill file is read-only and specifies how many
-		times the per-cpu freelist was empty but there were objects
-		available as the result of remote cpu frees.
+		The alloc_refill file shows how many times the per-cpu freelist
+		was empty but there were objects available as the result of
+		remote cpu frees.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/alloc_slab
@@ -77,8 +79,9 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The alloc_slab file is read-only and specifies how many times
-		a new slab had to be allocated from the page allocator.
+		The alloc_slab file is shows how many times a new slab had to
+		be allocated from the page allocator.  It can be written to
+		clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/alloc_slowpath
@@ -87,9 +90,10 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The alloc_slowpath file is read-only and specifies how many
-		objects have been allocated using the slow path because of a
-		refill or allocation from a partial or new slab.
+		The alloc_slowpath file shows how many objects have been
+		allocated using the slow path because of a refill or
+		allocation from a partial or new slab.  It can be written to
+		clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/cache_dma
@@ -117,10 +121,11 @@ KernelVersion:	2.6.31
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The file cpuslab_flush is read-only and specifies how many
-		times a cache's cpu slabs have been flushed as the result of
-		destroying or shrinking a cache, a cpu going offline, or as
-		the result of forcing an allocation from a certain node.
+		The file cpuslab_flush shows how many times a cache's cpu slabs
+		have been flushed as the result of destroying or shrinking a
+		cache, a cpu going offline, or as the result of forcing an
+		allocation from a certain node.  It can be written to clear the
+		current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/ctor
@@ -139,8 +144,8 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The file deactivate_empty is read-only and specifies how many
-		times an empty cpu slab was deactivated.
+		The deactivate_empty file shows how many times an empty cpu slab
+		was deactivated.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/deactivate_full
@@ -149,8 +154,8 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The file deactivate_full is read-only and specifies how many
-		times a full cpu slab was deactivated.
+		The deactivate_full file shows how many times a full cpu slab
+		was deactivated.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/deactivate_remote_frees
@@ -159,9 +164,9 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The file deactivate_remote_frees is read-only and specifies how
-		many times a cpu slab has been deactivated and contained free
-		objects that were freed remotely.
+		The deactivate_remote_frees file shows how many times a cpu slab
+		has been deactivated and contained free objects that were freed
+		remotely.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/deactivate_to_head
@@ -170,9 +175,9 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The file deactivate_to_head is read-only and specifies how
-		many times a partial cpu slab was deactivated and added to the
-		head of its node's partial list.
+		The deactivate_to_head file shows how many times a partial cpu
+		slab was deactivated and added to the head of its node's partial
+		list.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/deactivate_to_tail
@@ -181,9 +186,9 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The file deactivate_to_tail is read-only and specifies how
-		many times a partial cpu slab was deactivated and added to the
-		tail of its node's partial list.
+		The deactivate_to_tail file shows how many times a partial cpu
+		slab was deactivated and added to the tail of its node's partial
+		list.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/destroy_by_rcu
@@ -201,9 +206,9 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The file free_add_partial is read-only and specifies how many
-		times an object has been freed in a full slab so that it had to
-		added to its node's partial list.
+		The free_add_partial file shows how many times an object has
+		been freed in a full slab so that it had to added to its node's
+		partial list.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/free_calls
@@ -222,9 +227,9 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The free_fastpath file is read-only and specifies how many
-		objects have been freed using the fast path because it was an
-		object from the cpu slab.
+		The free_fastpath file shows how many objects have been freed
+		using the fast path because it was an object from the cpu slab.
+		It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/free_frozen
@@ -233,9 +238,9 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The free_frozen file is read-only and specifies how many
-		objects have been freed to a frozen slab (i.e. a remote cpu
-		slab).
+		The free_frozen file shows how many objects have been freed to
+		a frozen slab (i.e. a remote cpu slab).  It can be written to
+		clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/free_remove_partial
@@ -244,9 +249,10 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The file free_remove_partial is read-only and specifies how
-		many times an object has been freed to a now-empty slab so
-		that it had to be removed from its node's partial list.
+		The free_remove_partial file shows how many times an object has
+		been freed to a now-empty slab so that it had to be removed from
+		its node's partial list.  It can be written to clear the current
+		count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/free_slab
@@ -255,8 +261,9 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The free_slab file is read-only and specifies how many times an
-		empty slab has been freed back to the page allocator.
+		The free_slab file shows how many times an empty slab has been
+		freed back to the page allocator.  It can be written to clear
+		the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/free_slowpath
@@ -265,9 +272,9 @@ KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The free_slowpath file is read-only and specifies how many
-		objects have been freed using the slow path (i.e. to a full or
-		partial slab).
+		The free_slowpath file shows how many objects have been freed
+		using the slow path (i.e. to a full or partial slab).  It can
+		be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/hwcache_align
@@ -346,10 +353,10 @@ KernelVersion:	2.6.26
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 		Christoph Lameter <cl@linux-foundation.org>
 Description:
-		The file order_fallback is read-only and specifies how many
-		times an allocation of a new slab has not been possible at the
-		cache's order and instead fallen back to its minimum possible
-		order.
+		The order_fallback file shows how many times an allocation of a
+		new slab has not been possible at the cache's order and instead
+		fallen back to its minimum possible order.  It can be written to
+		clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
 What:		/sys/kernel/slab/cache/partial
diff --git a/Documentation/ABI/testing/sysfs-memory-page-offline b/Documentation/ABI/testing/sysfs-memory-page-offline
new file mode 100644
index 0000000..e14703f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-memory-page-offline
@@ -0,0 +1,44 @@
+What:		/sys/devices/system/memory/soft_offline_page
+Date:		Sep 2009
+KernelVersion:	2.6.33
+Contact:	andi@firstfloor.org
+Description:
+		Soft-offline the memory page containing the physical address
+		written into this file. Input is a hex number specifying the
+		physical address of the page. The kernel will then attempt
+		to soft-offline it, by moving the contents elsewhere or
+		dropping it if possible. The kernel will then be placed
+		on the bad page list and never be reused.
+
+		The offlining is done in kernel specific granuality.
+		Normally it's the base page size of the kernel, but
+		this might change.
+
+		The page must be still accessible, not poisoned. The
+		kernel will never kill anything for this, but rather
+		fail the offline.  Return value is the size of the
+		number, or a error when the offlining failed.  Reading
+		the file is not allowed.
+
+What:		/sys/devices/system/memory/hard_offline_page
+Date:		Sep 2009
+KernelVersion:	2.6.33
+Contact:	andi@firstfloor.org
+Description:
+		Hard-offline the memory page containing the physical
+		address written into this file. Input is a hex number
+		specifying the physical address of the page. The
+		kernel will then attempt to hard-offline the page, by
+		trying to drop the page or killing any owner or
+		triggering IO errors if needed.  Note this may kill
+		any processes owning the page. The kernel will avoid
+		to access this page assuming it's poisoned by the
+		hardware.
+
+		The offlining is done in kernel specific granuality.
+		Normally it's the base page size of the kernel, but
+		this might change.
+
+		Return value is the size of the number, or a error when
+		the offlining failed.
+		Reading the file is not allowed.
diff --git a/Documentation/Changes b/Documentation/Changes
index 6d0f1ef..f08b313 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -49,6 +49,8 @@ o  oprofile               0.9                     # oprofiled --version
 o  udev                   081                     # udevinfo -V
 o  grub                   0.93                    # grub --version
 o  mcelog		  0.6
+o  iptables               1.4.1                   # iptables -V
+
 
 Kernel compilation
 ==================
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index ab8300f..325cfd1 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -8,7 +8,7 @@
 
 DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
-	    procfs-guide.xml writing_usb_driver.xml networking.xml \
+	    writing_usb_driver.xml networking.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
@@ -32,10 +32,10 @@ PS_METHOD	= $(prefer-db2x)
 
 ###
 # The targets that may be used.
-PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs media
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs xmldoclinks
 
 BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
-xmldocs: $(BOOKS)
+xmldocs: $(BOOKS) xmldoclinks
 sgmldocs: xmldocs
 
 PS := $(patsubst %.xml, %.ps, $(BOOKS))
@@ -45,15 +45,24 @@ PDF := $(patsubst %.xml, %.pdf, $(BOOKS))
 pdfdocs: $(PDF)
 
 HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS)))
-htmldocs: media $(HTML)
+htmldocs: $(HTML)
 	$(call build_main_index)
+	$(call build_images)
 
 MAN := $(patsubst %.xml, %.9, $(BOOKS))
 mandocs: $(MAN)
 
-media:
-	mkdir -p $(srctree)/Documentation/DocBook/media/
-	cp $(srctree)/Documentation/DocBook/dvb/*.png $(srctree)/Documentation/DocBook/v4l/*.gif $(srctree)/Documentation/DocBook/media/
+build_images = mkdir -p $(objtree)/Documentation/DocBook/media/ && \
+	       cp $(srctree)/Documentation/DocBook/dvb/*.png $(srctree)/Documentation/DocBook/v4l/*.gif $(objtree)/Documentation/DocBook/media/
+
+xmldoclinks:
+ifneq ($(objtree),$(srctree))
+	for dep in dvb media-entities.tmpl media-indices.tmpl v4l; do \
+		rm -f $(objtree)/Documentation/DocBook/$$dep \
+		&& ln -s $(srctree)/Documentation/DocBook/$$dep $(objtree)/Documentation/DocBook/ \
+		|| exit; \
+	done
+endif
 
 installmandocs: mandocs
 	mkdir -p /usr/local/man/man9/
@@ -65,7 +74,7 @@ KERNELDOC = $(srctree)/scripts/kernel-doc
 DOCPROC   = $(objtree)/scripts/basic/docproc
 
 XMLTOFLAGS = -m $(srctree)/Documentation/DocBook/stylesheet.xsl
-#XMLTOFLAGS += --skip-validation
+XMLTOFLAGS += --skip-validation
 
 ###
 # DOCPROC is used for two purposes:
@@ -101,17 +110,6 @@ endif
 # Changes in kernel-doc force a rebuild of all documentation
 $(BOOKS): $(KERNELDOC)
 
-###
-# procfs guide uses a .c file as example code.
-# This requires an explicit dependency
-C-procfs-example = procfs_example.xml
-C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example))
-$(obj)/procfs-guide.xml: $(C-procfs-example2)
-
-# List of programs to build
-##oops, this is a kernel module::hostprogs-y := procfs_example
-obj-m += procfs_example.o
-
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
 
@@ -238,7 +236,7 @@ clean-files := $(DOCBOOKS) \
 	$(patsubst %.xml, %.pdf,  $(DOCBOOKS)) \
 	$(patsubst %.xml, %.html, $(DOCBOOKS)) \
 	$(patsubst %.xml, %.9,    $(DOCBOOKS)) \
-	$(C-procfs-example) $(index)
+	$(index)
 
 clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
 
diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl
index bb5ab74..c725cb8 100644
--- a/Documentation/DocBook/media-entities.tmpl
+++ b/Documentation/DocBook/media-entities.tmpl
@@ -23,6 +23,7 @@
 <!ENTITY VIDIOC-ENUMINPUT "<link linkend='vidioc-enuminput'><constant>VIDIOC_ENUMINPUT</constant></link>">
 <!ENTITY VIDIOC-ENUMOUTPUT "<link linkend='vidioc-enumoutput'><constant>VIDIOC_ENUMOUTPUT</constant></link>">
 <!ENTITY VIDIOC-ENUMSTD "<link linkend='vidioc-enumstd'><constant>VIDIOC_ENUMSTD</constant></link>">
+<!ENTITY VIDIOC-ENUM-DV-PRESETS "<link linkend='vidioc-enum-dv-presets'><constant>VIDIOC_ENUM_DV_PRESETS</constant></link>">
 <!ENTITY VIDIOC-ENUM-FMT "<link linkend='vidioc-enum-fmt'><constant>VIDIOC_ENUM_FMT</constant></link>">
 <!ENTITY VIDIOC-ENUM-FRAMEINTERVALS "<link linkend='vidioc-enum-frameintervals'><constant>VIDIOC_ENUM_FRAMEINTERVALS</constant></link>">
 <!ENTITY VIDIOC-ENUM-FRAMESIZES "<link linkend='vidioc-enum-framesizes'><constant>VIDIOC_ENUM_FRAMESIZES</constant></link>">
@@ -30,6 +31,8 @@
 <!ENTITY VIDIOC-G-AUDOUT "<link linkend='vidioc-g-audioout'><constant>VIDIOC_G_AUDOUT</constant></link>">
 <!ENTITY VIDIOC-G-CROP "<link linkend='vidioc-g-crop'><constant>VIDIOC_G_CROP</constant></link>">
 <!ENTITY VIDIOC-G-CTRL "<link linkend='vidioc-g-ctrl'><constant>VIDIOC_G_CTRL</constant></link>">
+<!ENTITY VIDIOC-G-DV-PRESET "<link linkend='vidioc-g-dv-preset'><constant>VIDIOC_G_DV_PRESET</constant></link>">
+<!ENTITY VIDIOC-G-DV-TIMINGS "<link linkend='vidioc-g-dv-timings'><constant>VIDIOC_G_DV_TIMINGS</constant></link>">
 <!ENTITY VIDIOC-G-ENC-INDEX "<link linkend='vidioc-g-enc-index'><constant>VIDIOC_G_ENC_INDEX</constant></link>">
 <!ENTITY VIDIOC-G-EXT-CTRLS "<link linkend='vidioc-g-ext-ctrls'><constant>VIDIOC_G_EXT_CTRLS</constant></link>">
 <!ENTITY VIDIOC-G-FBUF "<link linkend='vidioc-g-fbuf'><constant>VIDIOC_G_FBUF</constant></link>">
@@ -53,6 +56,7 @@
 <!ENTITY VIDIOC-QUERYCTRL "<link linkend='vidioc-queryctrl'><constant>VIDIOC_QUERYCTRL</constant></link>">
 <!ENTITY VIDIOC-QUERYMENU "<link linkend='vidioc-queryctrl'><constant>VIDIOC_QUERYMENU</constant></link>">
 <!ENTITY VIDIOC-QUERYSTD "<link linkend='vidioc-querystd'><constant>VIDIOC_QUERYSTD</constant></link>">
+<!ENTITY VIDIOC-QUERY-DV-PRESET "<link linkend='vidioc-query-dv-preset'><constant>VIDIOC_QUERY_DV_PRESET</constant></link>">
 <!ENTITY VIDIOC-REQBUFS "<link linkend='vidioc-reqbufs'><constant>VIDIOC_REQBUFS</constant></link>">
 <!ENTITY VIDIOC-STREAMOFF "<link linkend='vidioc-streamon'><constant>VIDIOC_STREAMOFF</constant></link>">
 <!ENTITY VIDIOC-STREAMON "<link linkend='vidioc-streamon'><constant>VIDIOC_STREAMON</constant></link>">
@@ -60,6 +64,8 @@
 <!ENTITY VIDIOC-S-AUDOUT "<link linkend='vidioc-g-audioout'><constant>VIDIOC_S_AUDOUT</constant></link>">
 <!ENTITY VIDIOC-S-CROP "<link linkend='vidioc-g-crop'><constant>VIDIOC_S_CROP</constant></link>">
 <!ENTITY VIDIOC-S-CTRL "<link linkend='vidioc-g-ctrl'><constant>VIDIOC_S_CTRL</constant></link>">
+<!ENTITY VIDIOC-S-DV-PRESET "<link linkend='vidioc-g-dv-preset'><constant>VIDIOC_S_DV_PRESET</constant></link>">
+<!ENTITY VIDIOC-S-DV-TIMINGS "<link linkend='vidioc-g-dv-timings'><constant>VIDIOC_S_DV_TIMINGS</constant></link>">
 <!ENTITY VIDIOC-S-EXT-CTRLS "<link linkend='vidioc-g-ext-ctrls'><constant>VIDIOC_S_EXT_CTRLS</constant></link>">
 <!ENTITY VIDIOC-S-FBUF "<link linkend='vidioc-g-fbuf'><constant>VIDIOC_S_FBUF</constant></link>">
 <!ENTITY VIDIOC-S-FMT "<link linkend='vidioc-g-fmt'><constant>VIDIOC_S_FMT</constant></link>">
@@ -118,6 +124,7 @@
 <!-- Structures -->
 <!ENTITY v4l2-audio "struct&nbsp;<link linkend='v4l2-audio'>v4l2_audio</link>">
 <!ENTITY v4l2-audioout "struct&nbsp;<link linkend='v4l2-audioout'>v4l2_audioout</link>">
+<!ENTITY v4l2-bt-timings "struct&nbsp;<link linkend='v4l2-bt-timings'>v4l2_bt_timings</link>">
 <!ENTITY v4l2-buffer "struct&nbsp;<link linkend='v4l2-buffer'>v4l2_buffer</link>">
 <!ENTITY v4l2-capability "struct&nbsp;<link linkend='v4l2-capability'>v4l2_capability</link>">
 <!ENTITY v4l2-captureparm "struct&nbsp;<link linkend='v4l2-captureparm'>v4l2_captureparm</link>">
@@ -128,6 +135,9 @@
 <!ENTITY v4l2-dbg-chip-ident "struct&nbsp;<link linkend='v4l2-dbg-chip-ident'>v4l2_dbg_chip_ident</link>">
 <!ENTITY v4l2-dbg-match "struct&nbsp;<link linkend='v4l2-dbg-match'>v4l2_dbg_match</link>">
 <!ENTITY v4l2-dbg-register "struct&nbsp;<link linkend='v4l2-dbg-register'>v4l2_dbg_register</link>">
+<!ENTITY v4l2-dv-enum-preset "struct&nbsp;<link linkend='v4l2-dv-enum-preset'>v4l2_dv_enum_preset</link>">
+<!ENTITY v4l2-dv-preset "struct&nbsp;<link linkend='v4l2-dv-preset'>v4l2_dv_preset</link>">
+<!ENTITY v4l2-dv-timings "struct&nbsp;<link linkend='v4l2-dv-timings'>v4l2_dv_timings</link>">
 <!ENTITY v4l2-enc-idx "struct&nbsp;<link linkend='v4l2-enc-idx'>v4l2_enc_idx</link>">
 <!ENTITY v4l2-enc-idx-entry "struct&nbsp;<link linkend='v4l2-enc-idx-entry'>v4l2_enc_idx_entry</link>">
 <!ENTITY v4l2-encoder-cmd "struct&nbsp;<link linkend='v4l2-encoder-cmd'>v4l2_encoder_cmd</link>">
@@ -243,6 +253,10 @@
 <!ENTITY sub-enumaudioout SYSTEM "v4l/vidioc-enumaudioout.xml">
 <!ENTITY sub-enuminput SYSTEM "v4l/vidioc-enuminput.xml">
 <!ENTITY sub-enumoutput SYSTEM "v4l/vidioc-enumoutput.xml">
+<!ENTITY sub-enum-dv-presets SYSTEM "v4l/vidioc-enum-dv-presets.xml">
+<!ENTITY sub-g-dv-preset SYSTEM "v4l/vidioc-g-dv-preset.xml">
+<!ENTITY sub-query-dv-preset SYSTEM "v4l/vidioc-query-dv-preset.xml">
+<!ENTITY sub-g-dv-timings SYSTEM "v4l/vidioc-g-dv-timings.xml">
 <!ENTITY sub-enumstd SYSTEM "v4l/vidioc-enumstd.xml">
 <!ENTITY sub-g-audio SYSTEM "v4l/vidioc-g-audio.xml">
 <!ENTITY sub-g-audioout SYSTEM "v4l/vidioc-g-audioout.xml">
@@ -333,6 +347,10 @@
 <!ENTITY enumaudioout SYSTEM "v4l/vidioc-enumaudioout.xml">
 <!ENTITY enuminput SYSTEM "v4l/vidioc-enuminput.xml">
 <!ENTITY enumoutput SYSTEM "v4l/vidioc-enumoutput.xml">
+<!ENTITY enum-dv-presets SYSTEM "v4l/vidioc-enum-dv-presets.xml">
+<!ENTITY g-dv-preset SYSTEM "v4l/vidioc-g-dv-preset.xml">
+<!ENTITY query-dv-preset SYSTEM "v4l/vidioc-query-dv-preset.xml">
+<!ENTITY g-dv-timings SYSTEM "v4l/vidioc-g-dv-timings.xml">
 <!ENTITY enumstd SYSTEM "v4l/vidioc-enumstd.xml">
 <!ENTITY g-audio SYSTEM "v4l/vidioc-g-audio.xml">
 <!ENTITY g-audioout SYSTEM "v4l/vidioc-g-audioout.xml">
diff --git a/Documentation/DocBook/media-indices.tmpl b/Documentation/DocBook/media-indices.tmpl
index 9e30a23..78d6031 100644
--- a/Documentation/DocBook/media-indices.tmpl
+++ b/Documentation/DocBook/media-indices.tmpl
@@ -36,6 +36,7 @@
 <indexentry><primaryie>enum&nbsp;<link linkend='v4l2-preemphasis'>v4l2_preemphasis</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-audio'>v4l2_audio</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-audioout'>v4l2_audioout</link></primaryie></indexentry>
+<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-bt-timings'>v4l2_bt_timings</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-buffer'>v4l2_buffer</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-capability'>v4l2_capability</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-captureparm'>v4l2_captureparm</link></primaryie></indexentry>
@@ -46,6 +47,9 @@
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dbg-chip-ident'>v4l2_dbg_chip_ident</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dbg-match'>v4l2_dbg_match</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dbg-register'>v4l2_dbg_register</link></primaryie></indexentry>
+<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dv-enum-preset'>v4l2_dv_enum_preset</link></primaryie></indexentry>
+<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dv-preset'>v4l2_dv_preset</link></primaryie></indexentry>
+<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dv-timings'>v4l2_dv_timings</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-enc-idx'>v4l2_enc_idx</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-enc-idx-entry'>v4l2_enc_idx_entry</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-encoder-cmd'>v4l2_encoder_cmd</link></primaryie></indexentry>
diff --git a/Documentation/DocBook/procfs-guide.tmpl b/Documentation/DocBook/procfs-guide.tmpl
deleted file mode 100644
index 9eba4b7..0000000
--- a/Documentation/DocBook/procfs-guide.tmpl
+++ /dev/null
@@ -1,626 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" [
-<!ENTITY procfsexample SYSTEM "procfs_example.xml">
-]>
-
-<book id="LKProcfsGuide">
-  <bookinfo>
-    <title>Linux Kernel Procfs Guide</title>
-
-    <authorgroup>
-      <author>
-	<firstname>Erik</firstname>
-	<othername>(J.A.K.)</othername>
-	<surname>Mouw</surname>
-	<affiliation>
-	  <address>
-            <email>mouw@nl.linux.org</email>
-          </address>
-	</affiliation>
-      </author>
-      <othercredit>
-	<contrib>
-	This software and documentation were written while working on the
-	LART computing board
-	(<ulink url="http://www.lartmaker.nl/">http://www.lartmaker.nl/</ulink>),
-	which was sponsored by the Delt University of Technology projects
-	Mobile Multi-media Communications and Ubiquitous Communications.
-	</contrib>
-      </othercredit>
-    </authorgroup>
-
-    <revhistory>
-      <revision>
-	<revnumber>1.0</revnumber>
-	<date>May 30, 2001</date>
-	<revremark>Initial revision posted to linux-kernel</revremark>
-      </revision>
-      <revision>
-	<revnumber>1.1</revnumber>
-	<date>June 3, 2001</date>
-	<revremark>Revised after comments from linux-kernel</revremark>
-      </revision>
-    </revhistory>
-
-    <copyright>
-      <year>2001</year>
-      <holder>Erik Mouw</holder>
-    </copyright>
-
-
-    <legalnotice>
-      <para>
-        This documentation is free software; you can redistribute it
-        and/or modify it under the terms of the GNU General Public
-        License as published by the Free Software Foundation; either
-        version 2 of the License, or (at your option) any later
-        version.
-      </para>
-      
-      <para>
-        This documentation is distributed in the hope that it will be
-        useful, but WITHOUT ANY WARRANTY; without even the implied
-        warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
-        PURPOSE.  See the GNU General Public License for more details.
-      </para>
-      
-      <para>
-        You should have received a copy of the GNU General Public
-        License along with this program; if not, write to the Free
-        Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-        MA 02111-1307 USA
-      </para>
-      
-      <para>
-        For more details see the file COPYING in the source
-        distribution of Linux.
-      </para>
-    </legalnotice>
-  </bookinfo>
-
-
-
-
-  <toc>
-  </toc>
-
-
-
-
-  <preface id="Preface">
-    <title>Preface</title>
-
-    <para>
-      This guide describes the use of the procfs file system from
-      within the Linux kernel. The idea to write this guide came up on
-      the #kernelnewbies IRC channel (see <ulink
-      url="http://www.kernelnewbies.org/">http://www.kernelnewbies.org/</ulink>),
-      when Jeff Garzik explained the use of procfs and forwarded me a
-      message Alexander Viro wrote to the linux-kernel mailing list. I
-      agreed to write it up nicely, so here it is.
-    </para>
-
-    <para>
-      I'd like to thank Jeff Garzik
-      <email>jgarzik@pobox.com</email> and Alexander Viro
-      <email>viro@parcelfarce.linux.theplanet.co.uk</email> for their input,
-      Tim Waugh <email>twaugh@redhat.com</email> for his <ulink
-      url="http://people.redhat.com/twaugh/docbook/selfdocbook/">Selfdocbook</ulink>,
-      and Marc Joosen <email>marcj@historia.et.tudelft.nl</email> for
-      proofreading.
-    </para>
-
-    <para>
-      Erik
-    </para>
-  </preface>
-
-
-
-
-  <chapter id="intro">
-    <title>Introduction</title>
-
-    <para>
-      The <filename class="directory">/proc</filename> file system
-      (procfs) is a special file system in the linux kernel. It's a
-      virtual file system: it is not associated with a block device
-      but exists only in memory. The files in the procfs are there to
-      allow userland programs access to certain information from the
-      kernel (like process information in <filename
-      class="directory">/proc/[0-9]+/</filename>), but also for debug
-      purposes (like <filename>/proc/ksyms</filename>).
-    </para>
-
-    <para>
-      This guide describes the use of the procfs file system from
-      within the Linux kernel. It starts by introducing all relevant
-      functions to manage the files within the file system. After that
-      it shows how to communicate with userland, and some tips and
-      tricks will be pointed out. Finally a complete example will be
-      shown.
-    </para>
-
-    <para>
-      Note that the files in <filename
-      class="directory">/proc/sys</filename> are sysctl files: they
-      don't belong to procfs and are governed by a completely
-      different API described in the Kernel API book.
-    </para>
-  </chapter>
-
-
-
-
-  <chapter id="managing">
-    <title>Managing procfs entries</title>
-    
-    <para>
-      This chapter describes the functions that various kernel
-      components use to populate the procfs with files, symlinks,
-      device nodes, and directories.
-    </para>
-
-    <para>
-      A minor note before we start: if you want to use any of the
-      procfs functions, be sure to include the correct header file! 
-      This should be one of the first lines in your code:
-    </para>
-
-    <programlisting>
-#include &lt;linux/proc_fs.h&gt;
-    </programlisting>
-
-
-
-
-    <sect1 id="regularfile">
-      <title>Creating a regular file</title>
-      
-      <funcsynopsis>
-	<funcprototype>
-	  <funcdef>struct proc_dir_entry* <function>create_proc_entry</function></funcdef>
-	  <paramdef>const char* <parameter>name</parameter></paramdef>
-	  <paramdef>mode_t <parameter>mode</parameter></paramdef>
-	  <paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
-	</funcprototype>
-      </funcsynopsis>
-
-      <para>
-        This function creates a regular file with the name
-        <parameter>name</parameter>, file mode
-        <parameter>mode</parameter> in the directory
-        <parameter>parent</parameter>. To create a file in the root of
-        the procfs, use <constant>NULL</constant> as
-        <parameter>parent</parameter> parameter. When successful, the
-        function will return a pointer to the freshly created
-        <structname>struct proc_dir_entry</structname>; otherwise it
-        will return <constant>NULL</constant>. <xref
-        linkend="userland"/> describes how to do something useful with
-        regular files.
-      </para>
-
-      <para>
-        Note that it is specifically supported that you can pass a
-        path that spans multiple directories. For example
-        <function>create_proc_entry</function>(<parameter>"drivers/via0/info"</parameter>)
-        will create the <filename class="directory">via0</filename>
-        directory if necessary, with standard
-        <constant>0755</constant> permissions.
-      </para>
-
-    <para>
-      If you only want to be able to read the file, the function
-      <function>create_proc_read_entry</function> described in <xref
-      linkend="convenience"/> may be used to create and initialise
-      the procfs entry in one single call.
-    </para>
-    </sect1>
-
-
-
-
-    <sect1 id="Creating_a_symlink">
-      <title>Creating a symlink</title>
-
-      <funcsynopsis>
-	<funcprototype>
-	  <funcdef>struct proc_dir_entry*
-	  <function>proc_symlink</function></funcdef> <paramdef>const
-	  char* <parameter>name</parameter></paramdef>
-	  <paramdef>struct proc_dir_entry*
-	  <parameter>parent</parameter></paramdef> <paramdef>const
-	  char* <parameter>dest</parameter></paramdef>
-	</funcprototype>
-      </funcsynopsis>
-      
-      <para>
-        This creates a symlink in the procfs directory
-        <parameter>parent</parameter> that points from
-        <parameter>name</parameter> to
-        <parameter>dest</parameter>. This translates in userland to
-        <literal>ln -s</literal> <parameter>dest</parameter>
-        <parameter>name</parameter>.
-      </para>
-    </sect1>
-
-    <sect1 id="Creating_a_directory">
-      <title>Creating a directory</title>
-      
-      <funcsynopsis>
-	<funcprototype>
-	  <funcdef>struct proc_dir_entry* <function>proc_mkdir</function></funcdef>
-	  <paramdef>const char* <parameter>name</parameter></paramdef>
-	  <paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
-	</funcprototype>
-      </funcsynopsis>
-
-      <para>
-        Create a directory <parameter>name</parameter> in the procfs
-        directory <parameter>parent</parameter>.
-      </para>
-    </sect1>
-
-
-
-
-    <sect1 id="Removing_an_entry">
-      <title>Removing an entry</title>
-      
-      <funcsynopsis>
-	<funcprototype>
-	  <funcdef>void <function>remove_proc_entry</function></funcdef>
-	  <paramdef>const char* <parameter>name</parameter></paramdef>
-	  <paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
-	</funcprototype>
-      </funcsynopsis>
-
-      <para>
-        Removes the entry <parameter>name</parameter> in the directory
-        <parameter>parent</parameter> from the procfs. Entries are
-        removed by their <emphasis>name</emphasis>, not by the
-        <structname>struct proc_dir_entry</structname> returned by the
-        various create functions. Note that this function doesn't
-        recursively remove entries.
-      </para>
-
-      <para>
-        Be sure to free the <structfield>data</structfield> entry from
-        the <structname>struct proc_dir_entry</structname> before
-        <function>remove_proc_entry</function> is called (that is: if
-        there was some <structfield>data</structfield> allocated, of
-        course). See <xref linkend="usingdata"/> for more information
-        on using the <structfield>data</structfield> entry.
-      </para>
-    </sect1>
-  </chapter>
-
-
-
-
-  <chapter id="userland">
-    <title>Communicating with userland</title>
-    
-    <para>
-       Instead of reading (or writing) information directly from
-       kernel memory, procfs works with <emphasis>call back
-       functions</emphasis> for files: functions that are called when
-       a specific file is being read or written. Such functions have
-       to be initialised after the procfs file is created by setting
-       the <structfield>read_proc</structfield> and/or
-       <structfield>write_proc</structfield> fields in the
-       <structname>struct proc_dir_entry*</structname> that the
-       function <function>create_proc_entry</function> returned:
-    </para>
-
-    <programlisting>
-struct proc_dir_entry* entry;
-
-entry->read_proc = read_proc_foo;
-entry->write_proc = write_proc_foo;
-    </programlisting>
-
-    <para>
-      If you only want to use a the
-      <structfield>read_proc</structfield>, the function
-      <function>create_proc_read_entry</function> described in <xref
-      linkend="convenience"/> may be used to create and initialise the
-      procfs entry in one single call.
-    </para>
-
-
-
-    <sect1 id="Reading_data">
-      <title>Reading data</title>
-
-      <para>
-        The read function is a call back function that allows userland
-        processes to read data from the kernel. The read function
-        should have the following format:
-      </para>
-
-      <funcsynopsis>
-	<funcprototype>
-	  <funcdef>int <function>read_func</function></funcdef>
-	  <paramdef>char* <parameter>buffer</parameter></paramdef>
-	  <paramdef>char** <parameter>start</parameter></paramdef>
-	  <paramdef>off_t <parameter>off</parameter></paramdef>
-	  <paramdef>int <parameter>count</parameter></paramdef>
-	  <paramdef>int* <parameter>peof</parameter></paramdef>
-	  <paramdef>void* <parameter>data</parameter></paramdef>
-	</funcprototype>
-      </funcsynopsis>
-
-      <para>
-        The read function should write its information into the
-        <parameter>buffer</parameter>, which will be exactly
-        <literal>PAGE_SIZE</literal> bytes long.
-      </para>
-
-      <para>
-        The parameter
-        <parameter>peof</parameter> should be used to signal that the
-        end of the file has been reached by writing
-        <literal>1</literal> to the memory location
-        <parameter>peof</parameter> points to.
-      </para>
-
-      <para>
-        The <parameter>data</parameter>
-        parameter can be used to create a single call back function for
-        several files, see <xref linkend="usingdata"/>.
-      </para>
-
-      <para>
-        The rest of the parameters and the return value are described
-	by a comment in <filename>fs/proc/generic.c</filename> as follows:
-      </para>
-
-      <blockquote>
-        <para>
-	You have three ways to return data:
-       	</para>
-        <orderedlist>
-          <listitem>
-            <para>
-	      Leave <literal>*start = NULL</literal>.  (This is the default.)
-	      Put the data of the requested offset at that
-	      offset within the buffer.  Return the number (<literal>n</literal>)
-	      of bytes there are from the beginning of the
-	      buffer up to the last byte of data.  If the
-	      number of supplied bytes (<literal>= n - offset</literal>) is
-	      greater than zero and you didn't signal eof
-	      and the reader is prepared to take more data
-	      you will be called again with the requested
-	      offset advanced by the number of bytes
-	      absorbed.  This interface is useful for files
-	      no larger than the buffer.
-	    </para>
-	  </listitem>
-	  <listitem>
-            <para>
-	      Set <literal>*start</literal> to an unsigned long value less than
-	      the buffer address but greater than zero.
-	      Put the data of the requested offset at the
-	      beginning of the buffer.  Return the number of
-	      bytes of data placed there.  If this number is
-	      greater than zero and you didn't signal eof
-	      and the reader is prepared to take more data
-	      you will be called again with the requested
-	      offset advanced by <literal>*start</literal>.  This interface is
-	      useful when you have a large file consisting
-	      of a series of blocks which you want to count
-	      and return as wholes.
-	      (Hack by Paul.Russell@rustcorp.com.au)
-	    </para>
-	  </listitem>
-	  <listitem>
-            <para>
-	      Set <literal>*start</literal> to an address within the buffer.
-	      Put the data of the requested offset at <literal>*start</literal>.
-	      Return the number of bytes of data placed there.
-	      If this number is greater than zero and you
-	      didn't signal eof and the reader is prepared to
-	      take more data you will be called again with the
-	      requested offset advanced by the number of bytes
-	      absorbed.
-	    </para>
-	  </listitem>
-	</orderedlist>
-      </blockquote>
-
-      <para>
-        <xref linkend="example"/> shows how to use a read call back
-        function.
-      </para>
-    </sect1>
-
-
-
-
-    <sect1 id="Writing_data">
-      <title>Writing data</title>
-
-      <para>
-        The write call back function allows a userland process to write
-        data to the kernel, so it has some kind of control over the
-        kernel. The write function should have the following format:
-      </para>
-
-      <funcsynopsis>
-	<funcprototype>
-	  <funcdef>int <function>write_func</function></funcdef>
-	  <paramdef>struct file* <parameter>file</parameter></paramdef>
-	  <paramdef>const char* <parameter>buffer</parameter></paramdef>
-	  <paramdef>unsigned long <parameter>count</parameter></paramdef>
-	  <paramdef>void* <parameter>data</parameter></paramdef>
-	</funcprototype>
-      </funcsynopsis>
-
-      <para>
-        The write function should read <parameter>count</parameter>
-        bytes at maximum from the <parameter>buffer</parameter>. Note
-        that the <parameter>buffer</parameter> doesn't live in the
-        kernel's memory space, so it should first be copied to kernel
-        space with <function>copy_from_user</function>. The
-        <parameter>file</parameter> parameter is usually
-        ignored. <xref linkend="usingdata"/> shows how to use the
-        <parameter>data</parameter> parameter.
-      </para>
-
-      <para>
-        Again, <xref linkend="example"/> shows how to use this call back
-        function.
-      </para>
-    </sect1>
-
-
-
-
-    <sect1 id="usingdata">
-      <title>A single call back for many files</title>
-
-      <para>
-         When a large number of almost identical files is used, it's
-         quite inconvenient to use a separate call back function for
-         each file. A better approach is to have a single call back
-         function that distinguishes between the files by using the
-         <structfield>data</structfield> field in <structname>struct
-         proc_dir_entry</structname>. First of all, the
-         <structfield>data</structfield> field has to be initialised:
-      </para>
-
-      <programlisting>
-struct proc_dir_entry* entry;
-struct my_file_data *file_data;
-
-file_data = kmalloc(sizeof(struct my_file_data), GFP_KERNEL);
-entry->data = file_data;
-      </programlisting>
-     
-      <para>
-          The <structfield>data</structfield> field is a <type>void
-          *</type>, so it can be initialised with anything.
-      </para>
-
-      <para>
-        Now that the <structfield>data</structfield> field is set, the
-        <function>read_proc</function> and
-        <function>write_proc</function> can use it to distinguish
-        between files because they get it passed into their
-        <parameter>data</parameter> parameter:
-      </para>
-
-      <programlisting>
-int foo_read_func(char *page, char **start, off_t off,
-                  int count, int *eof, void *data)
-{
-        int len;
-
-        if(data == file_data) {
-                /* special case for this file */
-        } else {
-                /* normal processing */
-        }
-
-        return len;
-}
-      </programlisting>
-
-      <para>
-        Be sure to free the <structfield>data</structfield> data field
-        when removing the procfs entry.
-      </para>
-    </sect1>
-  </chapter>
-
-
-
-
-  <chapter id="tips">
-    <title>Tips and tricks</title>
-
-
-
-
-    <sect1 id="convenience">
-      <title>Convenience functions</title>
-
-      <funcsynopsis>
-	<funcprototype>
-	  <funcdef>struct proc_dir_entry* <function>create_proc_read_entry</function></funcdef>
-	  <paramdef>const char* <parameter>name</parameter></paramdef>
-	  <paramdef>mode_t <parameter>mode</parameter></paramdef>
-	  <paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
-	  <paramdef>read_proc_t* <parameter>read_proc</parameter></paramdef>
-	  <paramdef>void* <parameter>data</parameter></paramdef>
-	</funcprototype>
-      </funcsynopsis>
-      
-      <para>
-        This function creates a regular file in exactly the same way
-        as <function>create_proc_entry</function> from <xref
-        linkend="regularfile"/> does, but also allows to set the read
-        function <parameter>read_proc</parameter> in one call. This
-        function can set the <parameter>data</parameter> as well, like
-        explained in <xref linkend="usingdata"/>.
-      </para>
-    </sect1>
-
-
-
-    <sect1 id="Modules">
-      <title>Modules</title>
-
-      <para>
-        If procfs is being used from within a module, be sure to set
-        the <structfield>owner</structfield> field in the
-        <structname>struct proc_dir_entry</structname> to
-        <constant>THIS_MODULE</constant>.
-      </para>
-
-      <programlisting>
-struct proc_dir_entry* entry;
-
-entry->owner = THIS_MODULE;
-      </programlisting>
-    </sect1>
-
-
-
-
-    <sect1 id="Mode_and_ownership">
-      <title>Mode and ownership</title>
-
-      <para>
-        Sometimes it is useful to change the mode and/or ownership of
-        a procfs entry. Here is an example that shows how to achieve
-        that:
-      </para>
-
-      <programlisting>
-struct proc_dir_entry* entry;
-
-entry->mode =  S_IWUSR |S_IRUSR | S_IRGRP | S_IROTH;
-entry->uid = 0;
-entry->gid = 100;
-      </programlisting>
-
-    </sect1>
-  </chapter>
-
-
-
-
-  <chapter id="example">
-    <title>Example</title>
-
-    <!-- be careful with the example code: it shouldn't be wider than
-    approx. 60 columns, or otherwise it won't fit properly on a page
-    -->
-
-&procfsexample;
-
-  </chapter>
-</book>
diff --git a/Documentation/DocBook/procfs_example.c b/Documentation/DocBook/procfs_example.c
deleted file mode 100644
index a5b1179..0000000
--- a/Documentation/DocBook/procfs_example.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * procfs_example.c: an example proc interface
- *
- * Copyright (C) 2001, Erik Mouw (mouw@nl.linux.org)
- *
- * This file accompanies the procfs-guide in the Linux kernel
- * source. Its main use is to demonstrate the concepts and
- * functions described in the guide.
- *
- * This software has been developed while working on the LART
- * computing board (http://www.lartmaker.nl), which was sponsored
- * by the Delt University of Technology projects Mobile Multi-media
- * Communications and Ubiquitous Communications.
- *
- * This program is free software; you can redistribute
- * it and/or modify it under the terms of the GNU General
- * Public License as published by the Free Software
- * Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be
- * useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE.  See the GNU General Public License for more
- * details.
- * 
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place,
- * Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/proc_fs.h>
-#include <linux/jiffies.h>
-#include <asm/uaccess.h>
-
-
-#define MODULE_VERS "1.0"
-#define MODULE_NAME "procfs_example"
-
-#define FOOBAR_LEN 8
-
-struct fb_data_t {
-	char name[FOOBAR_LEN + 1];
-	char value[FOOBAR_LEN + 1];
-};
-
-
-static struct proc_dir_entry *example_dir, *foo_file,
-	*bar_file, *jiffies_file, *symlink;
-
-
-struct fb_data_t foo_data, bar_data;
-
-
-static int proc_read_jiffies(char *page, char **start,
-			     off_t off, int count,
-			     int *eof, void *data)
-{
-	int len;
-
-	len = sprintf(page, "jiffies = %ld\n",
-                      jiffies);
-
-	return len;
-}
-
-
-static int proc_read_foobar(char *page, char **start,
-			    off_t off, int count, 
-			    int *eof, void *data)
-{
-	int len;
-	struct fb_data_t *fb_data = (struct fb_data_t *)data;
-
-	/* DON'T DO THAT - buffer overruns are bad */
-	len = sprintf(page, "%s = '%s'\n", 
-		      fb_data->name, fb_data->value);
-
-	return len;
-}
-
-
-static int proc_write_foobar(struct file *file,
-			     const char *buffer,
-			     unsigned long count, 
-			     void *data)
-{
-	int len;
-	struct fb_data_t *fb_data = (struct fb_data_t *)data;
-
-	if(count > FOOBAR_LEN)
-		len = FOOBAR_LEN;
-	else
-		len = count;
-
-	if(copy_from_user(fb_data->value, buffer, len))
-		return -EFAULT;
-
-	fb_data->value[len] = '\0';
-
-	return len;
-}
-
-
-static int __init init_procfs_example(void)
-{
-	int rv = 0;
-
-	/* create directory */
-	example_dir = proc_mkdir(MODULE_NAME, NULL);
-	if(example_dir == NULL) {
-		rv = -ENOMEM;
-		goto out;
-	}
-	/* create jiffies using convenience function */
-	jiffies_file = create_proc_read_entry("jiffies", 
-					      0444, example_dir, 
-					      proc_read_jiffies,
-					      NULL);
-	if(jiffies_file == NULL) {
-		rv  = -ENOMEM;
-		goto no_jiffies;
-	}
-
-	/* create foo and bar files using same callback
-	 * functions 
-	 */
-	foo_file = create_proc_entry("foo", 0644, example_dir);
-	if(foo_file == NULL) {
-		rv = -ENOMEM;
-		goto no_foo;
-	}
-
-	strcpy(foo_data.name, "foo");
-	strcpy(foo_data.value, "foo");
-	foo_file->data = &foo_data;
-	foo_file->read_proc = proc_read_foobar;
-	foo_file->write_proc = proc_write_foobar;
-		
-	bar_file = create_proc_entry("bar", 0644, example_dir);
-	if(bar_file == NULL) {
-		rv = -ENOMEM;
-		goto no_bar;
-	}
-
-	strcpy(bar_data.name, "bar");
-	strcpy(bar_data.value, "bar");
-	bar_file->data = &bar_data;
-	bar_file->read_proc = proc_read_foobar;
-	bar_file->write_proc = proc_write_foobar;
-		
-	/* create symlink */
-	symlink = proc_symlink("jiffies_too", example_dir, 
-			       "jiffies");
-	if(symlink == NULL) {
-		rv = -ENOMEM;
-		goto no_symlink;
-	}
-
-	/* everything OK */
-	printk(KERN_INFO "%s %s initialised\n",
-	       MODULE_NAME, MODULE_VERS);
-	return 0;
-
-no_symlink:
-	remove_proc_entry("bar", example_dir);
-no_bar:
-	remove_proc_entry("foo", example_dir);
-no_foo:
-	remove_proc_entry("jiffies", example_dir);
-no_jiffies:			      
-	remove_proc_entry(MODULE_NAME, NULL);
-out:
-	return rv;
-}
-
-
-static void __exit cleanup_procfs_example(void)
-{
-	remove_proc_entry("jiffies_too", example_dir);
-	remove_proc_entry("bar", example_dir);
-	remove_proc_entry("foo", example_dir);
-	remove_proc_entry("jiffies", example_dir);
-	remove_proc_entry(MODULE_NAME, NULL);
-
-	printk(KERN_INFO "%s %s removed\n",
-	       MODULE_NAME, MODULE_VERS);
-}
-
-
-module_init(init_procfs_example);
-module_exit(cleanup_procfs_example);
-
-MODULE_AUTHOR("Erik Mouw");
-MODULE_DESCRIPTION("procfs examples");
-MODULE_LICENSE("GPL");
diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml
index b1a81d2..c65f0ac 100644
--- a/Documentation/DocBook/v4l/common.xml
+++ b/Documentation/DocBook/v4l/common.xml
@@ -716,6 +716,41 @@ if (-1 == ioctl (fd, &VIDIOC-S-STD;, &amp;std_id)) {
 }
       </programlisting>
     </example>
+  <section id="dv-timings">
+	<title>Digital Video (DV) Timings</title>
+	<para>
+	The video standards discussed so far has been dealing with Analog TV and the
+corresponding video timings. Today there are many more different hardware interfaces
+such as High Definition TV interfaces (HDMI), VGA, DVI connectors etc., that carry
+video signals and there is a need to extend the API to select the video timings
+for these interfaces. Since it is not possible to extend the &v4l2-std-id; due to
+the limited bits available, a new set of IOCTLs is added to set/get video timings at
+the input and output: </para><itemizedlist>
+	<listitem>
+	<para>DV Presets: Digital Video (DV) presets. These are IDs representing a
+video timing at the input/output. Presets are pre-defined timings implemented
+by the hardware according to video standards. A __u32 data type is used to represent
+a preset unlike the bit mask that is used in &v4l2-std-id; allowing future extensions
+to support as many different presets as needed.</para>
+	</listitem>
+	<listitem>
+	<para>Custom DV Timings: This will allow applications to define more detailed
+custom video timings for the interface. This includes parameters such as width, height,
+polarities, frontporch, backporch etc.
+	</para>
+	</listitem>
+	</itemizedlist>
+	<para>To enumerate and query the attributes of DV presets supported by a device,
+applications use the &VIDIOC-ENUM-DV-PRESETS; ioctl. To get the current DV preset,
+applications use the &VIDIOC-G-DV-PRESET; ioctl and to set a preset they use the
+&VIDIOC-S-DV-PRESET; ioctl.</para>
+	<para>To set custom DV timings for the device, applications use the
+&VIDIOC-S-DV-TIMINGS; ioctl and to get current custom DV timings they use the
+&VIDIOC-G-DV-TIMINGS; ioctl.</para>
+	<para>Applications can make use of the <xref linkend="input-capabilities" /> and
+<xref linkend="output-capabilities"/> flags to decide what ioctls are available to set the
+video timings for the device.</para>
+	</section>
   </section>
 
   &sub-controls;
diff --git a/Documentation/DocBook/v4l/compat.xml b/Documentation/DocBook/v4l/compat.xml
index 4d1902a..b9dbdf9 100644
--- a/Documentation/DocBook/v4l/compat.xml
+++ b/Documentation/DocBook/v4l/compat.xml
@@ -2291,8 +2291,8 @@ was renamed to <structname id="v4l2-chip-ident-old">v4l2_chip_ident_old</structn
 	<listitem>
 	  <para>New control <constant>V4L2_CID_COLORFX</constant> was added.</para>
 	</listitem>
-       </orderedlist>
-     </section>
+      </orderedlist>
+    </section>
     <section>
       <title>V4L2 in Linux 2.6.32</title>
       <orderedlist>
@@ -2322,8 +2322,16 @@ more information.</para>
 	<listitem>
 	  <para>Added Remote Controller chapter, describing the default Remote Controller mapping for media devices.</para>
 	</listitem>
-       </orderedlist>
-     </section>
+      </orderedlist>
+    </section>
+    <section>
+      <title>V4L2 in Linux 2.6.33</title>
+      <orderedlist>
+	<listitem>
+	  <para>Added support for Digital Video timings in order to support HDTV receivers and transmitters.</para>
+	</listitem>
+      </orderedlist>
+    </section>
    </section>
 
    <section id="other">
diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml
index 937b415..060105a 100644
--- a/Documentation/DocBook/v4l/v4l2.xml
+++ b/Documentation/DocBook/v4l/v4l2.xml
@@ -74,6 +74,17 @@ Remote Controller chapter.</contrib>
 	  </address>
 	</affiliation>
       </author>
+
+      <author>
+	<firstname>Muralidharan</firstname>
+	<surname>Karicheri</surname>
+	<contrib>Documented the Digital Video timings API.</contrib>
+	<affiliation>
+	  <address>
+	    <email>m-karicheri2@ti.com</email>
+	  </address>
+	</affiliation>
+      </author>
     </authorgroup>
 
     <copyright>
@@ -89,7 +100,7 @@ Remote Controller chapter.</contrib>
       <year>2008</year>
       <year>2009</year>
       <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin
-Rubli, Andy Walls, Mauro Carvalho Chehab</holder>
+Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder>
     </copyright>
     <legalnotice>
     <para>Except when explicitly stated as GPL, programming examples within
@@ -103,6 +114,13 @@ structs, ioctls) must be noted in more detail in the history chapter
 applications. -->
 
       <revision>
+	<revnumber>2.6.33</revnumber>
+	<date>2009-12-03</date>
+	<authorinitials>mk</authorinitials>
+	<revremark>Added documentation for the Digital Video timings API.</revremark>
+      </revision>
+
+      <revision>
 	<revnumber>2.6.32</revnumber>
 	<date>2009-08-31</date>
 	<authorinitials>mcc</authorinitials>
@@ -355,7 +373,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 2.6.32</subtitle>
+ <subtitle>Revision 2.6.33</subtitle>
 
   <chapter id="common">
     &sub-common;
@@ -411,6 +429,7 @@ and discussions on the V4L mailing list.</revremark>
     &sub-encoder-cmd;
     &sub-enumaudio;
     &sub-enumaudioout;
+    &sub-enum-dv-presets;
     &sub-enum-fmt;
     &sub-enum-framesizes;
     &sub-enum-frameintervals;
@@ -421,6 +440,8 @@ and discussions on the V4L mailing list.</revremark>
     &sub-g-audioout;
     &sub-g-crop;
     &sub-g-ctrl;
+    &sub-g-dv-preset;
+    &sub-g-dv-timings;
     &sub-g-enc-index;
     &sub-g-ext-ctrls;
     &sub-g-fbuf;
@@ -441,6 +462,7 @@ and discussions on the V4L mailing list.</revremark>
     &sub-querybuf;
     &sub-querycap;
     &sub-queryctrl;
+    &sub-query-dv-preset;
     &sub-querystd;
     &sub-reqbufs;
     &sub-s-hw-freq-seek;
diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml
index 3e282ed..0683259 100644
--- a/Documentation/DocBook/v4l/videodev2.h.xml
+++ b/Documentation/DocBook/v4l/videodev2.h.xml
@@ -734,6 +734,99 @@ struct <link linkend="v4l2-standard">v4l2_standard</link> {
 };
 
 /*
+ *      V I D E O       T I M I N G S   D V     P R E S E T
+ */
+struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link> {
+        __u32   preset;
+        __u32   reserved[4];
+};
+
+/*
+ *      D V     P R E S E T S   E N U M E R A T I O N
+ */
+struct <link linkend="v4l2-dv-enum-preset">v4l2_dv_enum_preset</link> {
+        __u32   index;
+        __u32   preset;
+        __u8    name[32]; /* Name of the preset timing */
+        __u32   width;
+        __u32   height;
+        __u32   reserved[4];
+};
+
+/*
+ *      D V     P R E S E T     V A L U E S
+ */
+#define         V4L2_DV_INVALID         0
+#define         V4L2_DV_480P59_94       1 /* BT.1362 */
+#define         V4L2_DV_576P50          2 /* BT.1362 */
+#define         V4L2_DV_720P24          3 /* SMPTE 296M */
+#define         V4L2_DV_720P25          4 /* SMPTE 296M */
+#define         V4L2_DV_720P30          5 /* SMPTE 296M */
+#define         V4L2_DV_720P50          6 /* SMPTE 296M */
+#define         V4L2_DV_720P59_94       7 /* SMPTE 274M */
+#define         V4L2_DV_720P60          8 /* SMPTE 274M/296M */
+#define         V4L2_DV_1080I29_97      9 /* BT.1120/ SMPTE 274M */
+#define         V4L2_DV_1080I30         10 /* BT.1120/ SMPTE 274M */
+#define         V4L2_DV_1080I25         11 /* BT.1120 */
+#define         V4L2_DV_1080I50         12 /* SMPTE 296M */
+#define         V4L2_DV_1080I60         13 /* SMPTE 296M */
+#define         V4L2_DV_1080P24         14 /* SMPTE 296M */
+#define         V4L2_DV_1080P25         15 /* SMPTE 296M */
+#define         V4L2_DV_1080P30         16 /* SMPTE 296M */
+#define         V4L2_DV_1080P50         17 /* BT.1120 */
+#define         V4L2_DV_1080P60         18 /* BT.1120 */
+
+/*
+ *      D V     B T     T I M I N G S
+ */
+
+/* BT.656/BT.1120 timing data */
+struct <link linkend="v4l2-bt-timings">v4l2_bt_timings</link> {
+        __u32   width;          /* width in pixels */
+        __u32   height;         /* height in lines */
+        __u32   interlaced;     /* Interlaced or progressive */
+        __u32   polarities;     /* Positive or negative polarity */
+        __u64   pixelclock;     /* Pixel clock in HZ. Ex. 74.25MHz-&gt;74250000 */
+        __u32   hfrontporch;    /* Horizpontal front porch in pixels */
+        __u32   hsync;          /* Horizontal Sync length in pixels */
+        __u32   hbackporch;     /* Horizontal back porch in pixels */
+        __u32   vfrontporch;    /* Vertical front porch in pixels */
+        __u32   vsync;          /* Vertical Sync length in lines */
+        __u32   vbackporch;     /* Vertical back porch in lines */
+        __u32   il_vfrontporch; /* Vertical front porch for bottom field of
+                                 * interlaced field formats
+                                 */
+        __u32   il_vsync;       /* Vertical sync length for bottom field of
+                                 * interlaced field formats
+                                 */
+        __u32   il_vbackporch;  /* Vertical back porch for bottom field of
+                                 * interlaced field formats
+                                 */
+        __u32   reserved[16];
+} __attribute__ ((packed));
+
+/* Interlaced or progressive format */
+#define V4L2_DV_PROGRESSIVE     0
+#define V4L2_DV_INTERLACED      1
+
+/* Polarities. If bit is not set, it is assumed to be negative polarity */
+#define V4L2_DV_VSYNC_POS_POL   0x00000001
+#define V4L2_DV_HSYNC_POS_POL   0x00000002
+
+
+/* DV timings */
+struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link> {
+        __u32 type;
+        union {
+                struct <link linkend="v4l2-bt-timings">v4l2_bt_timings</link>  bt;
+                __u32   reserved[32];
+        };
+} __attribute__ ((packed));
+
+/* Values for the type field */
+#define V4L2_DV_BT_656_1120     0       /* BT.656/1120 timing type */
+
+/*
  *      V I D E O   I N P U T S
  */
 struct <link linkend="v4l2-input">v4l2_input</link> {
@@ -744,7 +837,8 @@ struct <link linkend="v4l2-input">v4l2_input</link> {
         __u32        tuner;             /*  Associated tuner */
         v4l2_std_id  std;
         __u32        status;
-        __u32        reserved[4];
+        __u32        capabilities;
+        __u32        reserved[3];
 };
 
 /*  Values for the 'type' field */
@@ -775,6 +869,11 @@ struct <link linkend="v4l2-input">v4l2_input</link> {
 #define V4L2_IN_ST_NO_ACCESS   0x02000000  /* Conditional access denied */
 #define V4L2_IN_ST_VTR         0x04000000  /* VTR time constant */
 
+/* capabilities flags */
+#define V4L2_IN_CAP_PRESETS             0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_IN_CAP_CUSTOM_TIMINGS      0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_IN_CAP_STD                 0x00000004 /* Supports S_STD */
+
 /*
  *      V I D E O   O U T P U T S
  */
@@ -785,13 +884,19 @@ struct <link linkend="v4l2-output">v4l2_output</link> {
         __u32        audioset;          /*  Associated audios (bitfield) */
         __u32        modulator;         /*  Associated modulator */
         v4l2_std_id  std;
-        __u32        reserved[4];
+        __u32        capabilities;
+        __u32        reserved[3];
 };
 /*  Values for the 'type' field */
 #define V4L2_OUTPUT_TYPE_MODULATOR              1
 #define V4L2_OUTPUT_TYPE_ANALOG                 2
 #define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY       3
 
+/* capabilities flags */
+#define V4L2_OUT_CAP_PRESETS            0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_OUT_CAP_CUSTOM_TIMINGS     0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_OUT_CAP_STD                0x00000004 /* Supports S_STD */
+
 /*
  *      C O N T R O L S
  */
@@ -1626,6 +1731,13 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> {
 #endif
 
 #define VIDIOC_S_HW_FREQ_SEEK    _IOW('V', 82, struct <link linkend="v4l2-hw-freq-seek">v4l2_hw_freq_seek</link>)
+#define VIDIOC_ENUM_DV_PRESETS  _IOWR('V', 83, struct <link linkend="v4l2-dv-enum-preset">v4l2_dv_enum_preset</link>)
+#define VIDIOC_S_DV_PRESET      _IOWR('V', 84, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
+#define VIDIOC_G_DV_PRESET      _IOWR('V', 85, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
+#define VIDIOC_QUERY_DV_PRESET  _IOR('V',  86, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
+#define VIDIOC_S_DV_TIMINGS     _IOWR('V', 87, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>)
+#define VIDIOC_G_DV_TIMINGS     _IOWR('V', 88, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>)
+
 /* Reminder: when adding new ioctls please add support for them to
    drivers/media/video/v4l2-compat-ioctl32.c as well! */
 
diff --git a/Documentation/DocBook/v4l/vidioc-enum-dv-presets.xml b/Documentation/DocBook/v4l/vidioc-enum-dv-presets.xml
new file mode 100644
index 0000000..1d31427
--- /dev/null
+++ b/Documentation/DocBook/v4l/vidioc-enum-dv-presets.xml
@@ -0,0 +1,238 @@
+<refentry id="vidioc-enum-dv-presets">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_ENUM_DV_PRESETS</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_ENUM_DV_PRESETS</refname>
+    <refpurpose>Enumerate supported Digital Video presets</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct v4l2_dv_enum_preset *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>VIDIOC_ENUM_DV_PRESETS</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>To query the attributes of a DV preset, applications initialize the
+<structfield>index</structfield> field and zero the reserved array of &v4l2-dv-enum-preset;
+and call the <constant>VIDIOC_ENUM_DV_PRESETS</constant> ioctl with a pointer to this
+structure. Drivers fill the rest of the structure or return an
+&EINVAL; when the index is out of bounds. To enumerate all DV Presets supported,
+applications shall begin at index zero, incrementing by one until the
+driver returns <errorcode>EINVAL</errorcode>. Drivers may enumerate a
+different set of DV presets after switching the video input or
+output.</para>
+
+    <table pgwide="1" frame="none" id="v4l2-dv-enum-preset">
+      <title>struct <structname>v4l2_dv_enum_presets</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>index</structfield></entry>
+	    <entry>Number of the DV preset, set by the
+application.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>preset</structfield></entry>
+	    <entry>This field identifies one of the DV preset values listed in <xref linkend="v4l2-dv-presets-vals"/>.</entry>
+	  </row>
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>name</structfield>[24]</entry>
+	    <entry>Name of the preset, a NUL-terminated ASCII string, for example: "720P-60", "1080I-60". This information is
+intended for the user.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>width</structfield></entry>
+	    <entry>Width of the active video in pixels for the DV preset.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>height</structfield></entry>
+	    <entry>Height of the active video in lines for the DV preset.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved</structfield>[4]</entry>
+	    <entry>Reserved for future extensions. Drivers must set the array to zero.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="v4l2-dv-presets-vals">
+      <title>struct <structname>DV Presets</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>Preset</entry>
+	    <entry>Preset value</entry>
+	    <entry>Description</entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_INVALID</entry>
+	    <entry>0</entry>
+	    <entry>Invalid preset value.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_480P59_94</entry>
+	    <entry>1</entry>
+	    <entry>720x480 progressive video at 59.94 fps as per BT.1362.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_576P50</entry>
+	    <entry>2</entry>
+	    <entry>720x576 progressive video at 50 fps as per BT.1362.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_720P24</entry>
+	    <entry>3</entry>
+	    <entry>1280x720 progressive video at 24 fps as per SMPTE 296M.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_720P25</entry>
+	    <entry>4</entry>
+	    <entry>1280x720 progressive video at 25 fps as per SMPTE 296M.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_720P30</entry>
+	    <entry>5</entry>
+	    <entry>1280x720 progressive video at 30 fps as per SMPTE 296M.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_720P50</entry>
+	    <entry>6</entry>
+	    <entry>1280x720 progressive video at 50 fps as per SMPTE 296M.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_720P59_94</entry>
+	    <entry>7</entry>
+	    <entry>1280x720 progressive video at 59.94 fps as per SMPTE 274M.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_720P60</entry>
+	    <entry>8</entry>
+	    <entry>1280x720 progressive video at 60 fps as per SMPTE 274M/296M.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_1080I29_97</entry>
+	    <entry>9</entry>
+	    <entry>1920x1080 interlaced video at 29.97 fps as per BT.1120/SMPTE 274M.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_1080I30</entry>
+	    <entry>10</entry>
+	    <entry>1920x1080 interlaced video at 30 fps as per BT.1120/SMPTE 274M.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_1080I25</entry>
+	    <entry>11</entry>
+	    <entry>1920x1080 interlaced video at 25 fps as per BT.1120.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_1080I50</entry>
+	    <entry>12</entry>
+	    <entry>1920x1080 interlaced video at 50 fps as per SMPTE 296M.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_1080I60</entry>
+	    <entry>13</entry>
+	    <entry>1920x1080 interlaced video at 60 fps as per SMPTE 296M.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_1080P24</entry>
+	    <entry>14</entry>
+	    <entry>1920x1080 progressive video at 24 fps as per SMPTE 296M.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_1080P25</entry>
+	    <entry>15</entry>
+	    <entry>1920x1080 progressive video at 25 fps as per SMPTE 296M.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_1080P30</entry>
+	    <entry>16</entry>
+	    <entry>1920x1080 progressive video at 30 fps as per SMPTE 296M.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_1080P50</entry>
+	    <entry>17</entry>
+	    <entry>1920x1080 progressive video at 50 fps as per BT.1120.</entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_1080P60</entry>
+	    <entry>18</entry>
+	    <entry>1920x1080 progressive video at 60 fps as per BT.1120.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EINVAL</errorcode></term>
+	<listitem>
+	  <para>The &v4l2-dv-enum-preset; <structfield>index</structfield>
+is out of bounds.</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+</refentry>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "v4l2.sgml"
+indent-tabs-mode: nil
+End:
+-->
diff --git a/Documentation/DocBook/v4l/vidioc-enuminput.xml b/Documentation/DocBook/v4l/vidioc-enuminput.xml
index 414856b..71b868e 100644
--- a/Documentation/DocBook/v4l/vidioc-enuminput.xml
+++ b/Documentation/DocBook/v4l/vidioc-enuminput.xml
@@ -124,7 +124,13 @@ current input.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
-	    <entry><structfield>reserved</structfield>[4]</entry>
+	    <entry><structfield>capabilities</structfield></entry>
+	    <entry>This field provides capabilities for the
+input. See <xref linkend="input-capabilities" /> for flags.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved</structfield>[3]</entry>
 	    <entry>Reserved for future extensions. Drivers must set
 the array to zero.</entry>
 	  </row>
@@ -261,6 +267,34 @@ flag is set Macrovision has been detected.</entry>
 	</tbody>
       </tgroup>
     </table>
+
+    <!-- Capability flags based on video timings RFC by Muralidharan
+Karicheri, titled RFC (v1.2): V4L - Support for video timings at the
+input/output interface to linux-media@vger.kernel.org on 19 Oct 2009.
+	-->
+    <table frame="none" pgwide="1" id="input-capabilities">
+      <title>Input capabilities</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>V4L2_IN_CAP_PRESETS</constant></entry>
+	    <entry>0x00000001</entry>
+	    <entry>This input supports setting DV presets by using VIDIOC_S_DV_PRESET.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_OUT_CAP_CUSTOM_TIMINGS</constant></entry>
+	    <entry>0x00000002</entry>
+	    <entry>This input supports setting custom video timings by using VIDIOC_S_DV_TIMINGS.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_IN_CAP_STD</constant></entry>
+	    <entry>0x00000004</entry>
+	    <entry>This input supports setting the TV standard by using VIDIOC_S_STD.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
   </refsect1>
 
   <refsect1>
diff --git a/Documentation/DocBook/v4l/vidioc-enumoutput.xml b/Documentation/DocBook/v4l/vidioc-enumoutput.xml
index e8d16dc..a281d26 100644
--- a/Documentation/DocBook/v4l/vidioc-enumoutput.xml
+++ b/Documentation/DocBook/v4l/vidioc-enumoutput.xml
@@ -114,7 +114,13 @@ details on video standards and how to switch see <xref
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
-	    <entry><structfield>reserved</structfield>[4]</entry>
+	    <entry><structfield>capabilities</structfield></entry>
+	    <entry>This field provides capabilities for the
+output. See <xref linkend="output-capabilities" /> for flags.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved</structfield>[3]</entry>
 	    <entry>Reserved for future extensions. Drivers must set
 the array to zero.</entry>
 	  </row>
@@ -147,6 +153,34 @@ CVBS, S-Video, RGB.</entry>
       </tgroup>
     </table>
 
+    <!-- Capabilities flags based on video timings RFC by Muralidharan
+Karicheri, titled RFC (v1.2): V4L - Support for video timings at the
+input/output interface to linux-media@vger.kernel.org on 19 Oct 2009.
+	-->
+    <table frame="none" pgwide="1" id="output-capabilities">
+      <title>Output capabilities</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>V4L2_OUT_CAP_PRESETS</constant></entry>
+	    <entry>0x00000001</entry>
+	    <entry>This output supports setting DV presets by using VIDIOC_S_DV_PRESET.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_OUT_CAP_CUSTOM_TIMINGS</constant></entry>
+	    <entry>0x00000002</entry>
+	    <entry>This output supports setting custom video timings by using VIDIOC_S_DV_TIMINGS.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_OUT_CAP_STD</constant></entry>
+	    <entry>0x00000004</entry>
+	    <entry>This output supports setting the TV standard by using VIDIOC_S_STD.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
   </refsect1>
   <refsect1>
     &return-value;
diff --git a/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml
new file mode 100644
index 0000000..3c6784e
--- /dev/null
+++ b/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml
@@ -0,0 +1,111 @@
+<refentry id="vidioc-g-dv-preset">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_G_DV_PRESET</refname>
+    <refname>VIDIOC_S_DV_PRESET</refname>
+    <refpurpose>Query or select the DV preset of the current input or output</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>&v4l2-dv-preset;
+*<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+    <para>To query and select the current DV preset, applications
+use the <constant>VIDIOC_G_DV_PRESET</constant> and <constant>VIDIOC_S_DV_PRESET</constant>
+ioctls which take a pointer to a &v4l2-dv-preset; type as argument.
+Applications must zero the reserved array in &v4l2-dv-preset;.
+<constant>VIDIOC_G_DV_PRESET</constant> returns a dv preset in the field
+<structfield>preset</structfield> of &v4l2-dv-preset;.</para>
+
+    <para><constant>VIDIOC_S_DV_PRESET</constant> accepts a pointer to a &v4l2-dv-preset;
+that has the preset value to be set. Applications must zero the reserved array in &v4l2-dv-preset;.
+If the preset is not supported, it returns an &EINVAL; </para>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EINVAL</errorcode></term>
+	<listitem>
+	  <para>This ioctl is not supported, or the
+<constant>VIDIOC_S_DV_PRESET</constant>,<constant>VIDIOC_S_DV_PRESET</constant> parameter was unsuitable.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>EBUSY</errorcode></term>
+	<listitem>
+	  <para>The device is busy and therefore can not change the preset.</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+
+    <table pgwide="1" frame="none" id="v4l2-dv-preset">
+      <title>struct <structname>v4l2_dv_preset</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>preset</structfield></entry>
+	    <entry>Preset value to represent the digital video timings</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved[4]</structfield></entry>
+	    <entry>Reserved fields for future use</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+  </refsect1>
+</refentry>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "v4l2.sgml"
+indent-tabs-mode: nil
+End:
+-->
diff --git a/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml b/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml
new file mode 100644
index 0000000..ecc1957
--- /dev/null
+++ b/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml
@@ -0,0 +1,224 @@
+<refentry id="vidioc-g-dv-timings">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_G_DV_TIMINGS, VIDIOC_S_DV_TIMINGS</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_G_DV_TIMINGS</refname>
+    <refname>VIDIOC_S_DV_TIMINGS</refname>
+    <refpurpose>Get or set custom DV timings for input or output</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>&v4l2-dv-timings;
+*<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>VIDIOC_G_DV_TIMINGS, VIDIOC_S_DV_TIMINGS</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+    <para>To set custom DV timings for the input or output, applications use the
+<constant>VIDIOC_S_DV_TIMINGS</constant> ioctl and to get the current custom timings,
+applications use the <constant>VIDIOC_G_DV_TIMINGS</constant> ioctl. The detailed timing
+information is filled in using the structure &v4l2-dv-timings;. These ioctls take
+a pointer to the &v4l2-dv-timings; structure as argument. If the ioctl is not supported
+or the timing values are not correct, the driver returns &EINVAL;.</para>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EINVAL</errorcode></term>
+	<listitem>
+	  <para>This ioctl is not supported, or the
+<constant>VIDIOC_S_DV_TIMINGS</constant> parameter was unsuitable.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>EBUSY</errorcode></term>
+	<listitem>
+	  <para>The device is busy and therefore can not change the timings.</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+
+    <table pgwide="1" frame="none" id="v4l2-bt-timings">
+      <title>struct <structname>v4l2_bt_timings</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>width</structfield></entry>
+	    <entry>Width of the active video in pixels</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>height</structfield></entry>
+	    <entry>Height of the active video in lines</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>interlaced</structfield></entry>
+	    <entry>Progressive (0) or interlaced (1)</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>polarities</structfield></entry>
+	    <entry>This is a bit mask that defines polarities of sync signals.
+bit 0 (V4L2_DV_VSYNC_POS_POL) is for vertical sync polarity and bit 1 (V4L2_DV_HSYNC_POS_POL) is for horizontal sync polarity. If the bit is set
+(1) it is positive polarity and if is cleared (0), it is negative polarity.</entry>
+	  </row>
+	  <row>
+	    <entry>__u64</entry>
+	    <entry><structfield>pixelclock</structfield></entry>
+	    <entry>Pixel clock in Hz. Ex. 74.25MHz->74250000</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>hfrontporch</structfield></entry>
+	    <entry>Horizontal front porch in pixels</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>hsync</structfield></entry>
+	    <entry>Horizontal sync length in pixels</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>hbackporch</structfield></entry>
+	    <entry>Horizontal back porch in pixels</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>vfrontporch</structfield></entry>
+	    <entry>Vertical front porch in lines</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>vsync</structfield></entry>
+	    <entry>Vertical sync length in lines</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>vbackporch</structfield></entry>
+	    <entry>Vertical back porch in lines</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>il_vfrontporch</structfield></entry>
+	    <entry>Vertical front porch in lines for bottom field of interlaced field formats</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>il_vsync</structfield></entry>
+	    <entry>Vertical sync length in lines for bottom field of interlaced field formats</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>il_vbackporch</structfield></entry>
+	    <entry>Vertical back porch in lines for bottom field of interlaced field formats</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="v4l2-dv-timings">
+      <title>struct <structname>v4l2_dv_timings</structname></title>
+      <tgroup cols="4">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>type</structfield></entry>
+	    <entry></entry>
+	    <entry>Type of DV timings as listed in <xref linkend="dv-timing-types"/>.</entry>
+	  </row>
+	  <row>
+	    <entry>union</entry>
+	    <entry><structfield></structfield></entry>
+	    <entry></entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>&v4l2-bt-timings;</entry>
+	    <entry><structfield>bt</structfield></entry>
+	    <entry>Timings defined by BT.656/1120 specifications</entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved</structfield>[32]</entry>
+	    <entry></entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="dv-timing-types">
+      <title>DV Timing types</title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>Timing type</entry>
+	    <entry>value</entry>
+	    <entry>Description</entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
+	  <row>
+	    <entry>V4L2_DV_BT_656_1120</entry>
+	    <entry>0</entry>
+	    <entry>BT.656/1120 timings</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+</refentry>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "v4l2.sgml"
+indent-tabs-mode: nil
+End:
+-->
diff --git a/Documentation/DocBook/v4l/vidioc-g-std.xml b/Documentation/DocBook/v4l/vidioc-g-std.xml
index b6f5d26..912f851 100644
--- a/Documentation/DocBook/v4l/vidioc-g-std.xml
+++ b/Documentation/DocBook/v4l/vidioc-g-std.xml
@@ -86,6 +86,12 @@ standards.</para>
 <constant>VIDIOC_S_STD</constant> parameter was unsuitable.</para>
 	</listitem>
       </varlistentry>
+      <varlistentry>
+	<term><errorcode>EBUSY</errorcode></term>
+	<listitem>
+	  <para>The device is busy and therefore can not change the standard</para>
+	</listitem>
+      </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
diff --git a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
new file mode 100644
index 0000000..87e4f0f
--- /dev/null
+++ b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
@@ -0,0 +1,85 @@
+<refentry id="vidioc-query-dv-preset">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_QUERY_DV_PRESET</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_QUERY_DV_PRESET</refname>
+    <refpurpose>Sense the DV preset received by the current
+input</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>&v4l2-dv-preset; *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+	<varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>VIDIOC_QUERY_DV_PRESET</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>The hardware may be able to detect the current DV preset
+automatically, similar to sensing the video standard. To do so, applications
+call <constant> VIDIOC_QUERY_DV_PRESET</constant> with a pointer to a
+&v4l2-dv-preset; type. Once the hardware detects a preset, that preset is
+returned in the preset field of &v4l2-dv-preset;. When detection is not
+possible or fails, the value V4L2_DV_INVALID is returned.</para>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EINVAL</errorcode></term>
+	<listitem>
+	  <para>This ioctl is not supported.</para>
+	</listitem>
+    </varlistentry>
+      <varlistentry>
+	<term><errorcode>EBUSY</errorcode></term>
+	<listitem>
+	  <para>The device is busy and therefore can not sense the preset</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+</refentry>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "v4l2.sgml"
+indent-tabs-mode: nil
+End:
+-->
diff --git a/Documentation/DocBook/v4l/vidioc-querystd.xml b/Documentation/DocBook/v4l/vidioc-querystd.xml
index b5a7ff9..1a9e603 100644
--- a/Documentation/DocBook/v4l/vidioc-querystd.xml
+++ b/Documentation/DocBook/v4l/vidioc-querystd.xml
@@ -70,6 +70,12 @@ current video input or output.</para>
 	  <para>This ioctl is not supported.</para>
 	</listitem>
       </varlistentry>
+      <varlistentry>
+	<term><errorcode>EBUSY</errorcode></term>
+	<listitem>
+	  <para>The device is busy and therefore can not detect the standard</para>
+	</listitem>
+      </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index 78a9168..1053a56 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -15,7 +15,7 @@ kernel patches.
 2: Passes allnoconfig, allmodconfig
 
 3: Builds on multiple CPU architectures by using local cross-compile tools
-   or something like PLM at OSDL.
+   or some other build farm.
 
 4: ppc64 is a good architecture for cross-compilation checking because it
    tends to use `unsigned long' for 64-bit quantities.
@@ -88,3 +88,6 @@ kernel patches.
 
 24: All memory barriers {e.g., barrier(), rmb(), wmb()} need a comment in the
     source code that explains the logic of what they are doing and why.
+
+25: If any ioctl's are added by the patch, then also update
+    Documentation/ioctl/ioctl-number.txt.
diff --git a/Documentation/acpi/method-customizing.txt b/Documentation/acpi/method-customizing.txt
new file mode 100644
index 0000000..e628cd2
--- /dev/null
+++ b/Documentation/acpi/method-customizing.txt
@@ -0,0 +1,66 @@
+Linux ACPI Custom Control Method How To
+=======================================
+
+Written by Zhang Rui <rui.zhang@intel.com>
+
+
+Linux supports customizing ACPI control methods at runtime.
+
+Users can use this to
+1. override an existing method which may not work correctly,
+   or just for debugging purposes.
+2. insert a completely new method in order to create a missing
+   method such as _OFF, _ON, _STA, _INI, etc.
+For these cases, it is far simpler to dynamically install a single
+control method rather than override the entire DSDT, because kernel
+rebuild/reboot is not needed and test result can be got in minutes.
+
+Note: Only ACPI METHOD can be overridden, any other object types like
+      "Device", "OperationRegion", are not recognized.
+Note: The same ACPI control method can be overridden for many times,
+      and it's always the latest one that used by Linux/kernel.
+
+1. override an existing method
+   a) get the ACPI table via ACPI sysfs I/F. e.g. to get the DSDT,
+      just run "cat /sys/firmware/acpi/tables/DSDT > /tmp/dsdt.dat"
+   b) disassemble the table by running "iasl -d dsdt.dat".
+   c) rewrite the ASL code of the method and save it in a new file,
+   d) package the new file (psr.asl) to an ACPI table format.
+      Here is an example of a customized \_SB._AC._PSR method,
+
+      DefinitionBlock ("", "SSDT", 1, "", "", 0x20080715)
+      {
+	External (ACON)
+
+	Method (\_SB_.AC._PSR, 0, NotSerialized)
+	{
+		Store ("In AC _PSR", Debug)
+		Return (ACON)
+	}
+      }
+      Note that the full pathname of the method in ACPI namespace
+      should be used.
+      And remember to use "External" to declare external objects.
+   e) assemble the file to generate the AML code of the method.
+      e.g. "iasl psr.asl" (psr.aml is generated as a result)
+   f) mount debugfs by "mount -t debugfs none /sys/kernel/debug"
+   g) override the old method via the debugfs by running
+      "cat /tmp/psr.aml > /sys/kernel/debug/acpi/custom_method"
+
+2. insert a new method
+   This is easier than overriding an existing method.
+   We just need to create the ASL code of the method we want to
+   insert and then follow the step c) ~ g) in section 1.
+
+3. undo your changes
+   The "undo" operation is not supported for a new inserted method
+   right now, i.e. we can not remove a method currently.
+   For an overrided method, in order to undo your changes, please
+   save a copy of the method original ASL code in step c) section 1,
+   and redo step c) ~ g) to override the method with the original one.
+
+
+Note: We can use a kernel with multiple custom ACPI method running,
+      But each individual write to debugfs can implement a SINGLE
+      method override. i.e. if we want to insert/override multiple
+      ACPI methods, we need to redo step c) ~ g) for multiple times.
diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS
new file mode 100644
index 0000000..0af0e9e
--- /dev/null
+++ b/Documentation/arm/OMAP/DSS
@@ -0,0 +1,317 @@
+OMAP2/3 Display Subsystem
+-------------------------
+
+This is an almost total rewrite of the OMAP FB driver in drivers/video/omap
+(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI,
+TV-out and multiple display support, but there are lots of small improvements
+also.
+
+The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB,
+panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live
+currently side by side, you can choose which one to use.
+
+Features
+--------
+
+Working and tested features include:
+
+- MIPI DPI (parallel) output
+- MIPI DSI output in command mode
+- MIPI DBI (RFBI) output
+- SDI output
+- TV output
+- All pieces can be compiled as a module or inside kernel
+- Use DISPC to update any of the outputs
+- Use CPU to update RFBI or DSI output
+- OMAP DISPC planes
+- RGB16, RGB24 packed, RGB24 unpacked
+- YUV2, UYVY
+- Scaling
+- Adjusting DSS FCK to find a good pixel clock
+- Use DSI DPLL to create DSS FCK
+
+Tested boards include:
+- OMAP3 SDP board
+- Beagle board
+- N810
+
+omapdss driver
+--------------
+
+The DSS driver does not itself have any support for Linux framebuffer, V4L or
+such like the current ones, but it has an internal kernel API that upper level
+drivers can use.
+
+The DSS driver models OMAP's overlays, overlay managers and displays in a
+flexible way to enable non-common multi-display configuration. In addition to
+modelling the hardware overlays, omapdss supports virtual overlays and overlay
+managers. These can be used when updating a display with CPU or system DMA.
+
+Panel and controller drivers
+----------------------------
+
+The drivers implement panel or controller specific functionality and are not
+usually visible to users except through omapfb driver.  They register
+themselves to the DSS driver.
+
+omapfb driver
+-------------
+
+The omapfb driver implements arbitrary number of standard linux framebuffers.
+These framebuffers can be routed flexibly to any overlays, thus allowing very
+dynamic display architecture.
+
+The driver exports some omapfb specific ioctls, which are compatible with the
+ioctls in the old driver.
+
+The rest of the non standard features are exported via sysfs. Whether the final
+implementation will use sysfs, or ioctls, is still open.
+
+V4L2 drivers
+------------
+
+V4L2 is being implemented in TI.
+
+From omapdss point of view the V4L2 drivers should be similar to framebuffer
+driver.
+
+Architecture
+--------------------
+
+Some clarification what the different components do:
+
+    - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the
+      pixel data for the image. Framebuffer has width and height and color
+      depth.
+    - Overlay defines where the pixels are read from and where they go on the
+      screen. The overlay may be smaller than framebuffer, thus displaying only
+      part of the framebuffer. The position of the overlay may be changed if
+      the overlay is smaller than the display.
+    - Overlay manager combines the overlays in to one image and feeds them to
+      display.
+    - Display is the actual physical display device.
+
+A framebuffer can be connected to multiple overlays to show the same pixel data
+on all of the overlays. Note that in this case the overlay input sizes must be
+the same, but, in case of video overlays, the output size can be different. Any
+framebuffer can be connected to any overlay.
+
+An overlay can be connected to one overlay manager. Also DISPC overlays can be
+connected only to DISPC overlay managers, and virtual overlays can be only
+connected to virtual overlays.
+
+An overlay manager can be connected to one display. There are certain
+restrictions which kinds of displays an overlay manager can be connected:
+
+    - DISPC TV overlay manager can be only connected to TV display.
+    - Virtual overlay managers can only be connected to DBI or DSI displays.
+    - DISPC LCD overlay manager can be connected to all displays, except TV
+      display.
+
+Sysfs
+-----
+The sysfs interface is mainly used for testing. I don't think sysfs
+interface is the best for this in the final version, but I don't quite know
+what would be the best interfaces for these things.
+
+The sysfs interface is divided to two parts: DSS and FB.
+
+/sys/class/graphics/fb? directory:
+mirror		0=off, 1=on
+rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
+rotate_type	0 = DMA rotation, 1 = VRFB rotation
+overlays	List of overlay numbers to which framebuffer pixels go
+phys_addr	Physical address of the framebuffer
+virt_addr	Virtual address of the framebuffer
+size		Size of the framebuffer
+
+/sys/devices/platform/omapdss/overlay? directory:
+enabled		0=off, 1=on
+input_size	width,height (ie. the framebuffer size)
+manager		Destination overlay manager name
+name
+output_size	width,height
+position	x,y
+screen_width	width
+global_alpha   	global alpha 0-255 0=transparent 255=opaque
+
+/sys/devices/platform/omapdss/manager? directory:
+display				Destination display
+name
+alpha_blending_enabled		0=off, 1=on
+trans_key_enabled		0=off, 1=on
+trans_key_type			gfx-destination, video-source
+trans_key_value			transparency color key (RGB24)
+default_color			default background color (RGB24)
+
+/sys/devices/platform/omapdss/display? directory:
+ctrl_name	Controller name
+mirror		0=off, 1=on
+update_mode	0=off, 1=auto, 2=manual
+enabled		0=off, 1=on
+name
+rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
+timings		Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw)
+		When writing, two special timings are accepted for tv-out:
+		"pal" and "ntsc"
+panel_name
+tear_elim	Tearing elimination 0=off, 1=on
+
+There are also some debugfs files at <debugfs>/omapdss/ which show information
+about clocks and registers.
+
+Examples
+--------
+
+The following definitions have been made for the examples below:
+
+ovl0=/sys/devices/platform/omapdss/overlay0
+ovl1=/sys/devices/platform/omapdss/overlay1
+ovl2=/sys/devices/platform/omapdss/overlay2
+
+mgr0=/sys/devices/platform/omapdss/manager0
+mgr1=/sys/devices/platform/omapdss/manager1
+
+lcd=/sys/devices/platform/omapdss/display0
+dvi=/sys/devices/platform/omapdss/display1
+tv=/sys/devices/platform/omapdss/display2
+
+fb0=/sys/class/graphics/fb0
+fb1=/sys/class/graphics/fb1
+fb2=/sys/class/graphics/fb2
+
+Default setup on OMAP3 SDP
+--------------------------
+
+Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI
+and TV-out are not in use. The columns from left to right are:
+framebuffers, overlays, overlay managers, displays. Framebuffers are
+handled by omapfb, and the rest by the DSS.
+
+FB0 --- GFX  -\            DVI
+FB1 --- VID1 --+- LCD ---- LCD
+FB2 --- VID2 -/   TV ----- TV
+
+Example: Switch from LCD to DVI
+----------------------
+
+w=`cat $dvi/timings | cut -d "," -f 2 | cut -d "/" -f 1`
+h=`cat $dvi/timings | cut -d "," -f 3 | cut -d "/" -f 1`
+
+echo "0" > $lcd/enabled
+echo "" > $mgr0/display
+fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h
+# at this point you have to switch the dvi/lcd dip-switch from the omap board
+echo "dvi" > $mgr0/display
+echo "1" > $dvi/enabled
+
+After this the configuration looks like:
+
+FB0 --- GFX  -\         -- DVI
+FB1 --- VID1 --+- LCD -/   LCD
+FB2 --- VID2 -/   TV ----- TV
+
+Example: Clone GFX overlay to LCD and TV
+-------------------------------
+
+w=`cat $tv/timings | cut -d "," -f 2 | cut -d "/" -f 1`
+h=`cat $tv/timings | cut -d "," -f 3 | cut -d "/" -f 1`
+
+echo "0" > $ovl0/enabled
+echo "0" > $ovl1/enabled
+
+echo "" > $fb1/overlays
+echo "0,1" > $fb0/overlays
+
+echo "$w,$h" > $ovl1/output_size
+echo "tv" > $ovl1/manager
+
+echo "1" > $ovl0/enabled
+echo "1" > $ovl1/enabled
+
+echo "1" > $tv/enabled
+
+After this the configuration looks like (only relevant parts shown):
+
+FB0 +-- GFX  ---- LCD ---- LCD
+     \- VID1 ---- TV  ---- TV
+
+Misc notes
+----------
+
+OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator.
+
+Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
+of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI.
+
+Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB
+does not support mirroring.
+
+VRFB rotation requires much more memory than non-rotated framebuffer, so you
+probably need to increase your vram setting before using VRFB rotation. Also,
+many applications may not work with VRFB if they do not pay attention to all
+framebuffer parameters.
+
+Kernel boot arguments
+---------------------
+
+vram=<size>
+	- Amount of total VRAM to preallocate. For example, "10M". omapfb
+	  allocates memory for framebuffers from VRAM.
+
+omapfb.mode=<display>:<mode>[,...]
+	- Default video mode for specified displays. For example,
+	  "dvi:800x400MR-24@60".  See drivers/video/modedb.c.
+	  There are also two special modes: "pal" and "ntsc" that
+	  can be used to tv out.
+
+omapfb.vram=<fbnum>:<size>[@<physaddr>][,...]
+	- VRAM allocated for a framebuffer. Normally omapfb allocates vram
+	  depending on the display size. With this you can manually allocate
+	  more or define the physical address of each framebuffer. For example,
+	  "1:4M" to allocate 4M for fb1.
+
+omapfb.debug=<y|n>
+	- Enable debug printing. You have to have OMAPFB debug support enabled
+	  in kernel config.
+
+omapfb.test=<y|n>
+	- Draw test pattern to framebuffer whenever framebuffer settings change.
+	  You need to have OMAPFB debug support enabled in kernel config.
+
+omapfb.vrfb=<y|n>
+	- Use VRFB rotation for all framebuffers.
+
+omapfb.rotate=<angle>
+	- Default rotation applied to all framebuffers.
+	  0 - 0 degree rotation
+	  1 - 90 degree rotation
+	  2 - 180 degree rotation
+	  3 - 270 degree rotation
+
+omapfb.mirror=<y|n>
+	- Default mirror for all framebuffers. Only works with DMA rotation.
+
+omapdss.def_disp=<display>
+	- Name of default display, to which all overlays will be connected.
+	  Common examples are "lcd" or "tv".
+
+omapdss.debug=<y|n>
+	- Enable debug printing. You have to have DSS debug support enabled in
+	  kernel config.
+
+TODO
+----
+
+DSS locking
+
+Error checking
+- Lots of checks are missing or implemented just as BUG()
+
+System DMA update for DSI
+- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how
+  to skip the empty byte?)
+
+OMAP1 support
+- Not sure if needed
+
diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX
index d6840a9..c34e124 100644
--- a/Documentation/blackfin/00-INDEX
+++ b/Documentation/blackfin/00-INDEX
@@ -1,9 +1,6 @@
 00-INDEX
 	- This file
 
-cache-lock.txt
-	- HOWTO for blackfin cache locking.
-
 cachefeatures.txt
 	- Supported cache features.
 
diff --git a/Documentation/blackfin/Makefile b/Documentation/blackfin/Makefile
new file mode 100644
index 0000000..773dbb1
--- /dev/null
+++ b/Documentation/blackfin/Makefile
@@ -0,0 +1,6 @@
+obj-m := gptimers-example.o
+
+all: modules
+
+modules clean:
+	$(MAKE) -C ../.. SUBDIRS=$(PWD) $@
diff --git a/Documentation/blackfin/cache-lock.txt b/Documentation/blackfin/cache-lock.txt
deleted file mode 100644
index 88ba1e6..0000000
--- a/Documentation/blackfin/cache-lock.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * File:         Documentation/blackfin/cache-lock.txt
- * Based on:
- * Author:
- *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
- *
- * Rev:          $Id: cache-lock.txt 2384 2006-11-01 04:12:43Z magicyang $
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- */
-
-How to lock your code in cache in uClinux/blackfin
---------------------------------------------------
-
-There are only a few steps required to lock your code into the cache.
-Currently you can lock the code by Way.
-
-Below are the interface provided for locking the cache.
-
-
-1. cache_grab_lock(int Ways);
-
-This function grab the lock for locking your code into the cache specified
-by Ways.
-
-
-2. cache_lock(int Ways);
-
-This function should be called after your critical code has been executed.
-Once the critical code exits, the code is now loaded into the cache. This
-function locks the code into the cache.
-
-
-So, the example sequence will be:
-
-	cache_grab_lock(WAY0_L);	/* Grab the lock */
-
-	critical_code();		/* Execute the code of interest */
-
-	cache_lock(WAY0_L);		/* Lock the cache */
-
-Where WAY0_L signifies WAY0 locking.
diff --git a/Documentation/blackfin/cachefeatures.txt b/Documentation/blackfin/cachefeatures.txt
index 0fbec23..75de51f 100644
--- a/Documentation/blackfin/cachefeatures.txt
+++ b/Documentation/blackfin/cachefeatures.txt
@@ -41,16 +41,6 @@
 		icplb_flush();
 		dcplb_flush();
 
-	- Locking the cache.
-
-		cache_grab_lock();
-		cache_lock();
-
-	Please refer linux-2.6.x/Documentation/blackfin/cache-lock.txt for how to
-	lock the cache.
-
-	Locking the cache is optional feature.
-
 	- Miscellaneous cache functions.
 
 		flush_cache_all();
diff --git a/Documentation/blackfin/gptimers-example.c b/Documentation/blackfin/gptimers-example.c
new file mode 100644
index 0000000..b1bd634
--- /dev/null
+++ b/Documentation/blackfin/gptimers-example.c
@@ -0,0 +1,83 @@
+/*
+ * Simple gptimers example
+ *	http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:gptimers
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/gptimers.h>
+#include <asm/portmux.h>
+
+/* ... random driver includes ... */
+
+#define DRIVER_NAME "gptimer_example"
+
+struct gptimer_data {
+	uint32_t period, width;
+};
+static struct gptimer_data data;
+
+/* ... random driver state ... */
+
+static irqreturn_t gptimer_example_irq(int irq, void *dev_id)
+{
+	struct gptimer_data *data = dev_id;
+
+	/* make sure it was our timer which caused the interrupt */
+	if (!get_gptimer_intr(TIMER5_id))
+		return IRQ_NONE;
+
+	/* read the width/period values that were captured for the waveform */
+	data->width = get_gptimer_pwidth(TIMER5_id);
+	data->period = get_gptimer_period(TIMER5_id);
+
+	/* acknowledge the interrupt */
+	clear_gptimer_intr(TIMER5_id);
+
+	/* tell the upper layers we took care of things */
+	return IRQ_HANDLED;
+}
+
+/* ... random driver code ... */
+
+static int __init gptimer_example_init(void)
+{
+	int ret;
+
+	/* grab the peripheral pins */
+	ret = peripheral_request(P_TMR5, DRIVER_NAME);
+	if (ret) {
+		printk(KERN_NOTICE DRIVER_NAME ": peripheral request failed\n");
+		return ret;
+	}
+
+	/* grab the IRQ for the timer */
+	ret = request_irq(IRQ_TIMER5, gptimer_example_irq, IRQF_SHARED, DRIVER_NAME, &data);
+	if (ret) {
+		printk(KERN_NOTICE DRIVER_NAME ": IRQ request failed\n");
+		peripheral_free(P_TMR5);
+		return ret;
+	}
+
+	/* setup the timer and enable it */
+	set_gptimer_config(TIMER5_id, WDTH_CAP | PULSE_HI | PERIOD_CNT | IRQ_ENA);
+	enable_gptimers(TIMER5bit);
+
+	return 0;
+}
+module_init(gptimer_example_init);
+
+static void __exit gptimer_example_exit(void)
+{
+	disable_gptimers(TIMER5bit);
+	free_irq(IRQ_TIMER5, &data);
+	peripheral_free(P_TMR5);
+}
+module_exit(gptimer_example_exit);
+
+MODULE_LICENSE("BSD");
diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt
index 75a58d1..6c30e930 100644
--- a/Documentation/cpu-freq/cpu-drivers.txt
+++ b/Documentation/cpu-freq/cpu-drivers.txt
@@ -92,9 +92,9 @@ policy->cpuinfo.max_freq -	the minimum and maximum frequency
 				(in kHz) which is supported by 
 				this CPU
 policy->cpuinfo.transition_latency   the time it takes on this CPU to
-				switch between two frequencies (if
-				appropriate, else specify
-				CPUFREQ_ETERNAL)
+				switch between two frequencies in
+				nanoseconds (if appropriate, else
+				specify CPUFREQ_ETERNAL)
 
 policy->cur			The current operating frequency of
 				this CPU (if appropriate)
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index 2a5b850..04f6b32 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -203,6 +203,17 @@ scaling_cur_freq :		Current frequency of the CPU as determined by
 				the frequency the kernel thinks the CPU runs
 				at.
 
+bios_limit :			If the BIOS tells the OS to limit a CPU to
+				lower frequencies, the user can read out the
+				maximum available frequency from this file.
+				This typically can happen through (often not
+				intended) BIOS settings, restrictions
+				triggered through a service processor or other
+				BIOS/HW based implementations.
+				This does not cover thermal ACPI limitations
+				which can be detected through the generic
+				thermal driver.
+
 If you have selected the "userspace" governor which allows you to
 set the CPU operating frequency to a specific value, you can read out
 the current frequency in
diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt
index 9d620c1..4d4a644b 100644
--- a/Documentation/cpu-hotplug.txt
+++ b/Documentation/cpu-hotplug.txt
@@ -49,6 +49,12 @@ maxcpus=n    Restrict boot time cpus to n. Say if you have 4 cpus, using
 additional_cpus=n (*)	Use this to limit hotpluggable cpus. This option sets
   			cpu_possible_map = cpu_present_map + additional_cpus
 
+cede_offline={"off","on"}  Use this option to disable/enable putting offlined
+		            processors to an extended H_CEDE state on
+			    supported pseries platforms.
+			    If nothing is specified,
+			    cede_offline is set to "on".
+
 (*) Option valid only for following architectures
 - ia64
 
diff --git a/Documentation/device-mapper/snapshot.txt b/Documentation/device-mapper/snapshot.txt
index a5009c8..e3a77b2 100644
--- a/Documentation/device-mapper/snapshot.txt
+++ b/Documentation/device-mapper/snapshot.txt
@@ -8,13 +8,19 @@ the block device which are also writable without interfering with the
 original content;
 *) To create device "forks", i.e. multiple different versions of the
 same data stream.
+*) To merge a snapshot of a block device back into the snapshot's origin
+device.
 
+In the first two cases, dm copies only the chunks of data that get
+changed and uses a separate copy-on-write (COW) block device for
+storage.
 
-In both cases, dm copies only the chunks of data that get changed and
-uses a separate copy-on-write (COW) block device for storage.
+For snapshot merge the contents of the COW storage are merged back into
+the origin device.
 
 
-There are two dm targets available: snapshot and snapshot-origin.
+There are three dm targets available:
+snapshot, snapshot-origin, and snapshot-merge.
 
 *) snapshot-origin <origin>
 
@@ -40,8 +46,25 @@ The difference is that for transient snapshots less metadata must be
 saved on disk - they can be kept in memory by the kernel.
 
 
-How this is used by LVM2
-========================
+* snapshot-merge <origin> <COW device> <persistent> <chunksize>
+
+takes the same table arguments as the snapshot target except it only
+works with persistent snapshots.  This target assumes the role of the
+"snapshot-origin" target and must not be loaded if the "snapshot-origin"
+is still present for <origin>.
+
+Creates a merging snapshot that takes control of the changed chunks
+stored in the <COW device> of an existing snapshot, through a handover
+procedure, and merges these chunks back into the <origin>.  Once merging
+has started (in the background) the <origin> may be opened and the merge
+will continue while I/O is flowing to it.  Changes to the <origin> are
+deferred until the merging snapshot's corresponding chunk(s) have been
+merged.  Once merging has started the snapshot device, associated with
+the "snapshot" target, will return -EIO when accessed.
+
+
+How snapshot is used by LVM2
+============================
 When you create the first LVM2 snapshot of a volume, four dm devices are used:
 
 1) a device containing the original mapping table of the source volume;
@@ -72,3 +95,30 @@ brw-------  1 root root 254, 12 29 ago 18:15 /dev/mapper/volumeGroup-snap-cow
 brw-------  1 root root 254, 13 29 ago 18:15 /dev/mapper/volumeGroup-snap
 brw-------  1 root root 254, 10 29 ago 18:14 /dev/mapper/volumeGroup-base
 
+
+How snapshot-merge is used by LVM2
+==================================
+A merging snapshot assumes the role of the "snapshot-origin" while
+merging.  As such the "snapshot-origin" is replaced with
+"snapshot-merge".  The "-real" device is not changed and the "-cow"
+device is renamed to <origin name>-cow to aid LVM2's cleanup of the
+merging snapshot after it completes.  The "snapshot" that hands over its
+COW device to the "snapshot-merge" is deactivated (unless using lvchange
+--refresh); but if it is left active it will simply return I/O errors.
+
+A snapshot will merge into its origin with the following command:
+
+lvconvert --merge volumeGroup/snap
+
+we'll now have this situation:
+
+# dmsetup table|grep volumeGroup
+
+volumeGroup-base-real: 0 2097152 linear 8:19 384
+volumeGroup-base-cow: 0 204800 linear 8:19 2097536
+volumeGroup-base: 0 2097152 snapshot-merge 254:11 254:12 P 16
+
+# ls -lL /dev/mapper/volumeGroup-*
+brw-------  1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
+brw-------  1 root root 254, 12 29 ago 18:16 /dev/mapper/volumeGroup-base-cow
+brw-------  1 root root 254, 10 29 ago 18:16 /dev/mapper/volumeGroup-base
diff --git a/Documentation/fb/viafb.txt b/Documentation/fb/viafb.txt
index 67dbf44..f3e046a 100644
--- a/Documentation/fb/viafb.txt
+++ b/Documentation/fb/viafb.txt
@@ -7,7 +7,7 @@
     VIA UniChrome Family(CLE266, PM800 / CN400 / CN300,
                         P4M800CE / P4M800Pro / CN700 / VN800,
                         CX700 / VX700, K8M890, P4M890,
-                        CN896 / P4M900, VX800)
+                        CN896 / P4M900, VX800, VX855)
 
 [Driver features]
 ------------------------
@@ -154,13 +154,6 @@
         0 : No Dual Edge Panel (default)
         1 : Dual Edge Panel
 
-    viafb_video_dev:
-        This option is used to specify video output devices(CRT, DVI, LCD) for
-        duoview case.
-        For example:
-        To output video on DVI, we should use:
-            modprobe viafb viafb_video_dev=DVI...
-
     viafb_lcd_port:
         This option is used to specify LCD output port,
         available values are "DVP0" "DVP1" "DFP_HIGHLOW" "DFP_HIGH" "DFP_LOW".
@@ -181,9 +174,6 @@ Notes:
        and bpp, need to call VIAFB specified ioctl interface VIAFB_SET_DEVICE
        instead of calling common ioctl function FBIOPUT_VSCREENINFO since
        viafb doesn't support multi-head well, or it will cause screen crush.
-    4. VX800 2D accelerator hasn't been supported in this driver yet. When
-       using driver on VX800, the driver will disable the acceleration
-       function as default.
 
 
 [Configure viafb with "fbset" tool]
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 2a4d779..870d190 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -291,22 +291,6 @@ Who:	Michael Buesch <mb@bu3sch.de>
 
 ---------------------------
 
-What:	usedac i386 kernel parameter
-When:	2.6.27
-Why:	replaced by allowdac and no dac combination
-Who:	Glauber Costa <gcosta@redhat.com>
-
----------------------------
-
-What: print_fn_descriptor_symbol()
-When: October 2009
-Why:  The %pF vsprintf format provides the same functionality in a
-      simpler way.  print_fn_descriptor_symbol() is deprecated but
-      still present to give out-of-tree modules time to change.
-Who:  Bjorn Helgaas <bjorn.helgaas@hp.com>
-
----------------------------
-
 What:	/sys/o2cb symlink
 When:	January 2010
 Why:	/sys/fs/o2cb is the proper location for this information - /sys/o2cb
@@ -490,3 +474,22 @@ Why:	Obsoleted by the adt7475 driver.
 Who:	Jean Delvare <khali@linux-fr.org>
 
 ---------------------------
+What:	Support for lcd_switch and display_get in asus-laptop driver
+When:	March 2010
+Why:	These two features use non-standard interfaces. There are the
+	only features that really need multiple path to guess what's
+	the right method name on a specific laptop.
+
+	Removing them will allow to remove a lot of code an significantly
+	clean the drivers.
+
+	This will affect the backlight code which won't be able to know
+	if the backlight is on or off. The platform display file will also be
+	write only (like the one in eeepc-laptop).
+
+	This should'nt affect a lot of user because they usually know
+	when their display is on or off.
+
+Who:	Corentin Chary <corentin.chary@gmail.com>
+
+----------------------------
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index f15621e..875d496 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -1,7 +1,5 @@
 00-INDEX
 	- this file (info on some of the filesystems supported by linux).
-Exporting
-	- explanation of how to make filesystems exportable.
 Locking
 	- info on locking rules as they pertain to Linux VFS.
 9p.txt
@@ -36,6 +34,8 @@ dnotify.txt
 	- info about directory notification in Linux.
 ecryptfs.txt
 	- docs on eCryptfs: stacked cryptographic filesystem for Linux.
+exofs.txt
+	- info, usage, mount options, design about EXOFS.
 ext2.txt
 	- info, mount options and specifications for the Ext2 filesystem.
 ext3.txt
@@ -66,12 +66,8 @@ mandatory-locking.txt
 	- info on the Linux implementation of Sys V mandatory file locking.
 ncpfs.txt
 	- info on Novell Netware(tm) filesystem using NCP protocol.
-nfs41-server.txt
-	- info on the Linux server implementation of NFSv4 minor version 1.
-nfs-rdma.txt
-	- how to install and setup the Linux NFS/RDMA client and server software.
-nfsroot.txt
-	- short guide on setting up a diskless box with NFS root filesystem.
+nfs/
+	- nfs-related documentation.
 nilfs2.txt
 	- info and mount options for the NILFS2 filesystem.
 ntfs.txt
@@ -90,8 +86,6 @@ relay.txt
 	- info on relay, for efficient streaming from kernel to user space.
 romfs.txt
 	- description of the ROMFS filesystem.
-rpc-cache.txt
-	- introduction to the caching mechanisms in the sunrpc layer.
 seq_file.txt
 	- how to use the seq_file API
 sharedsubtree.txt
diff --git a/Documentation/filesystems/exofs.txt b/Documentation/filesystems/exofs.txt
index 0ced74c..abd2a9b 100644
--- a/Documentation/filesystems/exofs.txt
+++ b/Documentation/filesystems/exofs.txt
@@ -60,13 +60,13 @@ USAGE
 
    mkfs.exofs --pid=65536 --format /dev/osd0
 
-   The --format is optional if not specified no OSD_FORMAT will be
-   preformed and a clean file system will be created in the specified pid,
+   The --format is optional. If not specified, no OSD_FORMAT will be
+   performed and a clean file system will be created in the specified pid,
    in the available space of the target. (Use --format=size_in_meg to limit
    the total LUN space available)
 
-   If pid already exist it will be deleted and a new one will be created in it's
-   place. Be careful.
+   If pid already exists, it will be deleted and a new one will be created in
+   its place. Be careful.
 
    An exofs lives inside a single OSD partition. You can create multiple exofs
    filesystems on the same device using multiple pids.
@@ -81,7 +81,7 @@ USAGE
 
 7. For reference (See do-exofs example script):
 	do-exofs start - an example of how to perform the above steps.
-	do-exofs stop -  an example of how to unmount the file system.
+	do-exofs stop - an example of how to unmount the file system.
 	do-exofs format - an example of how to format and mkfs a new exofs.
 
 8. Extra compilation flags (uncomment in fs/exofs/Kbuild):
@@ -104,8 +104,8 @@ Where:
     exofs specific options: Options are separated by commas (,)
 		pid=<integer> - The partition number to mount/create as
                                 container of the filesystem.
-                                This option is mandatory
-                to=<integer>  - Timeout in ticks for a single command
+                                This option is mandatory.
+                to=<integer>  - Timeout in ticks for a single command.
                                 default is (60 * HZ) [for debugging only]
 
 ===============================================================================
@@ -116,7 +116,7 @@ DESIGN
   with a special ID (defined in common.h).
   Information included in the file system control block is used to fill the
   in-memory superblock structure at mount time. This object is created before
-  the file system is used by mkexofs.c It contains information such as:
+  the file system is used by mkexofs.c. It contains information such as:
 	- The file system's magic number
 	- The next inode number to be allocated
 
@@ -134,8 +134,8 @@ DESIGN
   attributes. This applies to both regular files and other types (directories,
   device files, symlinks, etc.).
 
-* Credentials are generated per object (inode and superblock) when they is
-  created in memory (read off disk or created). The credential works for all
+* Credentials are generated per object (inode and superblock) when they are
+  created in memory (read from disk or created). The credential works for all
   operations and is used as long as the object remains in memory.
 
 * Async OSD operations are used whenever possible, but the target may execute
@@ -145,7 +145,8 @@ DESIGN
   from executing in reverse order:
 	- The following are handled with the OBJ_CREATED and OBJ_2BCREATED
 	  flags. OBJ_CREATED is set when we know the object exists on the OSD -
-	  in create's callback function, and when we successfully do a read_inode.
+	  in create's callback function, and when we successfully do a
+	  read_inode.
 	  OBJ_2BCREATED is set in the beginning of the create function, so we
 	  know that we should wait.
 		- create/delete: delete should wait until the object is created
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 05d5cf1..867c5b50 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -32,8 +32,8 @@ journal_dev=devnum	When the external journal device's major/minor numbers
 			identified through its new major/minor numbers encoded
 			in devnum.
 
-noload			Don't load the journal on mounting. Note that this forces
-			mount of inconsistent filesystem, which can lead to
+norecovery		Don't load the journal on mounting. Note that this forces
+noload			mount of inconsistent filesystem, which can lead to
 			various problems.
 
 data=journal		All data are committed into the journal prior to being
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 6d94e06..af6885c 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -153,8 +153,8 @@ journal_dev=devnum	When the external journal device's major/minor numbers
 			identified through its new major/minor numbers encoded
 			in devnum.
 
-noload			Don't load the journal on mounting.  Note that
-                     	if the filesystem was not unmounted cleanly,
+norecovery		Don't load the journal on mounting.  Note that
+noload			if the filesystem was not unmounted cleanly,
                      	skipping the journal replay will lead to the
                      	filesystem containing inconsistencies that can
                      	lead to any number of problems.
@@ -353,6 +353,12 @@ noauto_da_alloc		replacing existing files via patterns such as
 			system crashes before the delayed allocation
 			blocks are forced to disk.
 
+discard		Controls whether ext4 should issue discard/TRIM
+nodiscard(*)		commands to the underlying block device when
+			blocks are freed.  This is useful for SSD devices
+			and sparse/thinly-provisioned LUNs, but it is off
+			by default until sufficient testing has been done.
+
 Data Mode
 =========
 There are 3 different data modes:
diff --git a/Documentation/filesystems/nfs/00-INDEX b/Documentation/filesystems/nfs/00-INDEX
new file mode 100644
index 0000000..2f68cd6
--- /dev/null
+++ b/Documentation/filesystems/nfs/00-INDEX
@@ -0,0 +1,16 @@
+00-INDEX
+	- this file (nfs-related documentation).
+Exporting
+	- explanation of how to make filesystems exportable.
+knfsd-stats.txt
+	- statistics which the NFS server makes available to user space.
+nfs.txt
+	- nfs client, and DNS resolution for fs_locations.
+nfs41-server.txt
+	- info on the Linux server implementation of NFSv4 minor version 1.
+nfs-rdma.txt
+	- how to install and setup the Linux NFS/RDMA client and server software
+nfsroot.txt
+	- short guide on setting up a diskless box with NFS root filesystem.
+rpc-cache.txt
+	- introduction to the caching mechanisms in the sunrpc layer.
diff --git a/Documentation/filesystems/Exporting b/Documentation/filesystems/nfs/Exporting
index 87019d2..87019d2 100644
--- a/Documentation/filesystems/Exporting
+++ b/Documentation/filesystems/nfs/Exporting
diff --git a/Documentation/filesystems/knfsd-stats.txt b/Documentation/filesystems/nfs/knfsd-stats.txt
index 64ced51..64ced51 100644
--- a/Documentation/filesystems/knfsd-stats.txt
+++ b/Documentation/filesystems/nfs/knfsd-stats.txt
diff --git a/Documentation/filesystems/nfs-rdma.txt b/Documentation/filesystems/nfs/nfs-rdma.txt
index e386f7e..e386f7e 100644
--- a/Documentation/filesystems/nfs-rdma.txt
+++ b/Documentation/filesystems/nfs/nfs-rdma.txt
diff --git a/Documentation/filesystems/nfs.txt b/Documentation/filesystems/nfs/nfs.txt
index f50f26c..f50f26c 100644
--- a/Documentation/filesystems/nfs.txt
+++ b/Documentation/filesystems/nfs/nfs.txt
diff --git a/Documentation/filesystems/nfs41-server.txt b/Documentation/filesystems/nfs/nfs41-server.txt
index 5920fe2..1bd0d0c 100644
--- a/Documentation/filesystems/nfs41-server.txt
+++ b/Documentation/filesystems/nfs/nfs41-server.txt
@@ -41,7 +41,7 @@ interoperability problems with future clients.  Known issues:
 	  conformant with the spec (for example, we don't use kerberos
 	  on the backchannel correctly).
 	- no trunking support: no clients currently take advantage of
-	  trunking, but this is a mandatory failure, and its use is
+	  trunking, but this is a mandatory feature, and its use is
 	  recommended to clients in a number of places.  (E.g. to ensure
 	  timely renewal in case an existing connection's retry timeouts
 	  have gotten too long; see section 8.3 of the draft.)
@@ -213,3 +213,10 @@ The following cases aren't supported yet:
   DESTROY_CLIENTID, DESTROY_SESSION, EXCHANGE_ID.
 * DESTROY_SESSION MUST be the final operation in the COMPOUND request.
 
+Nonstandard compound limitations:
+* No support for a sessions fore channel RPC compound that requires both a
+  ca_maxrequestsize request and a ca_maxresponsesize reply, so we may
+  fail to live up to the promise we made in CREATE_SESSION fore channel
+  negotiation.
+* No more than one IO operation (read, write, readdir) allowed per
+  compound.
diff --git a/Documentation/filesystems/nfsroot.txt b/Documentation/filesystems/nfs/nfsroot.txt
index 3ba0b94..3ba0b94 100644
--- a/Documentation/filesystems/nfsroot.txt
+++ b/Documentation/filesystems/nfs/nfsroot.txt
diff --git a/Documentation/filesystems/rpc-cache.txt b/Documentation/filesystems/nfs/rpc-cache.txt
index 8a382be..8a382be 100644
--- a/Documentation/filesystems/rpc-cache.txt
+++ b/Documentation/filesystems/nfs/rpc-cache.txt
diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt
index 01539f4..4949fca 100644
--- a/Documentation/filesystems/nilfs2.txt
+++ b/Documentation/filesystems/nilfs2.txt
@@ -49,8 +49,7 @@ Mount options
 NILFS2 supports the following mount options:
 (*) == default
 
-barrier=on(*)		This enables/disables barriers. barrier=off disables
-			it, barrier=on enables it.
+nobarrier		Disables barriers.
 errors=continue(*)	Keep going on a filesystem error.
 errors=remount-ro	Remount the filesystem read-only on an error.
 errors=panic		Panic and halt the machine if an error occurs.
@@ -71,6 +70,10 @@ order=strict		Apply strict in-order semantics that preserves sequence
 			blocks.  That means, it is guaranteed that no
 			overtaking of events occurs in the recovered file
 			system after a crash.
+norecovery		Disable recovery of the filesystem on mount.
+			This disables every write access on the device for
+			read-only mounts or snapshots.  This option will fail
+			for r/w mounts on an unclean volume.
 
 NILFS2 usage
 ============
diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting
index 92b888d..a7e9746 100644
--- a/Documentation/filesystems/porting
+++ b/Documentation/filesystems/porting
@@ -140,7 +140,7 @@ Callers of notify_change() need ->i_mutex now.
 New super_block field "struct export_operations *s_export_op" for
 explicit support for exporting, e.g. via NFS.  The structure is fully
 documented at its declaration in include/linux/fs.h, and in
-Documentation/filesystems/Exporting.
+Documentation/filesystems/nfs/Exporting.
 
 Briefly it allows for the definition of decode_fh and encode_fh operations
 to encode and decode filehandles, and allows the filesystem to use
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 94b9f20..220cc63 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -38,6 +38,7 @@ Table of Contents
   3.3	/proc/<pid>/io - Display the IO accounting fields
   3.4	/proc/<pid>/coredump_filter - Core dump filtering settings
   3.5	/proc/<pid>/mountinfo - Information about mounts
+  3.6	/proc/<pid>/comm  & /proc/<pid>/task/<tid>/comm
 
 
 ------------------------------------------------------------------------------
@@ -1409,3 +1410,11 @@ For more information on mount propagation see:
 
   Documentation/filesystems/sharedsubtree.txt
 
+
+3.6	/proc/<pid>/comm  & /proc/<pid>/task/<tid>/comm
+--------------------------------------------------------
+These files provide a method to access a tasks comm value. It also allows for
+a task to set its own or one of its thread siblings comm value. The comm value
+is limited in size compared to the cmdline value, so writing anything longer
+then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated
+comm value.
diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt
index 0d15ebc..a1e2e0d 100644
--- a/Documentation/filesystems/seq_file.txt
+++ b/Documentation/filesystems/seq_file.txt
@@ -248,9 +248,7 @@ code, that is done in the initialization code in the usual way:
 	{
 	        struct proc_dir_entry *entry;
 
-	        entry = create_proc_entry("sequence", 0, NULL);
-	        if (entry)
-	                entry->proc_fops = &ct_file_ops;
+	        proc_create("sequence", 0, NULL, &ct_file_ops);
 	        return 0;
 	}
 
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 623f094..3de2f32 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -472,7 +472,7 @@ __sync_single_inode) to check if ->writepages has been successful in
 writing out the whole address_space.
 
 The Writeback tag is used by filemap*wait* and sync_page* functions,
-via wait_on_page_writeback_range, to wait for all writeback to
+via filemap_fdatawait_range, to wait for all writeback to
 complete.  While waiting ->sync_page (if defined) will be called on
 each page that is found to require writeback.
 
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index e4e7daed2..1866c27 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -531,6 +531,13 @@ and have the following read/write attributes:
 		This file exists only if the pin can be configured as an
 		interrupt generating input pin.
 
+	"active_low" ... reads as either 0 (false) or 1 (true).  Write
+		any nonzero value to invert the value attribute both
+		for reading and writing.  Existing and subsequent
+		poll(2) support configuration via the edge attribute
+		for "rising" and "falling" edges will follow this
+		setting.
+
 GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
 controller implementing GPIOs starting at #42) and have the following
 read-only attributes:
@@ -566,6 +573,8 @@ requested using gpio_request():
 	int gpio_export_link(struct device *dev, const char *name,
 		unsigned gpio)
 
+	/* change the polarity of a GPIO node in sysfs */
+	int gpio_sysfs_set_active_low(unsigned gpio, int value);
 
 After a kernel driver requests a GPIO, it may only be made available in
 the sysfs interface by gpio_export().  The driver can control whether the
@@ -580,3 +589,9 @@ After the GPIO has been exported, gpio_export_link() allows creating
 symlinks from elsewhere in sysfs to the GPIO sysfs node.  Drivers can
 use this to provide the interface under their own device in sysfs with
 a descriptive name.
+
+Drivers can use gpio_sysfs_set_active_low() to hide GPIO line polarity
+differences between boards from user space.  This only affects the
+sysfs interface.  Polarity change can be done both before and after
+gpio_export(), and previously enabled poll(2) support for either
+rising or falling edge will be reconfigured to follow this setting.
diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/hwmon/lis3lv02d
index effe949..06534f2 100644
--- a/Documentation/hwmon/lis3lv02d
+++ b/Documentation/hwmon/lis3lv02d
@@ -3,7 +3,8 @@ Kernel driver lis3lv02d
 
 Supported chips:
 
-  * STMicroelectronics LIS3LV02DL and LIS3LV02DQ
+  * STMicroelectronics LIS3LV02DL, LIS3LV02DQ (12 bits precision)
+  * STMicroelectronics LIS302DL, LIS3L02DQ, LIS331DL (8 bits)
 
 Authors:
         Yan Burman <burman.yan@gmail.com>
@@ -13,32 +14,52 @@ Authors:
 Description
 -----------
 
-This driver provides support for the accelerometer found in various HP
-laptops sporting the feature officially called "HP Mobile Data
-Protection System 3D" or "HP 3D DriveGuard". It detects automatically
-laptops with this sensor. Known models (for now the HP 2133, nc6420,
-nc2510, nc8510, nc84x0, nw9440 and nx9420) will have their axis
-automatically oriented on standard way (eg: you can directly play
-neverball).  The accelerometer data is readable via
-/sys/devices/platform/lis3lv02d.
+This driver provides support for the accelerometer found in various HP laptops
+sporting the feature officially called "HP Mobile Data Protection System 3D" or
+"HP 3D DriveGuard". It detects automatically laptops with this sensor. Known
+models (full list can be found in drivers/hwmon/hp_accel.c) will have their
+axis automatically oriented on standard way (eg: you can directly play
+neverball). The accelerometer data is readable via
+/sys/devices/platform/lis3lv02d. Reported values are scaled
+to mg values (1/1000th of earth gravity).
 
 Sysfs attributes under /sys/devices/platform/lis3lv02d/:
 position - 3D position that the accelerometer reports. Format: "(x,y,z)"
-calibrate - read: values (x, y, z) that are used as the base for input
-		  class device operation.
-            write: forces the base to be recalibrated with the current
-		   position.
-rate - reports the sampling rate of the accelerometer device in HZ
+rate - read reports the sampling rate of the accelerometer device in HZ.
+	write changes sampling rate of the accelerometer device.
+	Only values which are supported by HW are accepted.
+selftest - performs selftest for the chip as specified by chip manufacturer.
 
 This driver also provides an absolute input class device, allowing
-the laptop to act as a pinball machine-esque joystick.
+the laptop to act as a pinball machine-esque joystick. Joystick device can be
+calibrated. Joystick device can be in two different modes.
+By default output values are scaled between -32768 .. 32767. In joystick raw
+mode, joystick and sysfs position entry have the same scale. There can be
+small difference due to input system fuzziness feature.
+Events are also available as input event device.
+
+Selftest is meant only for hardware diagnostic purposes. It is not meant to be
+used during normal operations. Position data is not corrupted during selftest
+but interrupt behaviour is not guaranteed to work reliably. In test mode, the
+sensing element is internally moved little bit. Selftest measures difference
+between normal mode and test mode. Chip specifications tell the acceptance
+limit for each type of the chip. Limits are provided via platform data
+to allow adjustment of the limits without a change to the actual driver.
+Seltest returns either "OK x y z" or "FAIL x y z" where x, y and z are
+measured difference between modes. Axes are not remapped in selftest mode.
+Measurement values are provided to help HW diagnostic applications to make
+final decision.
+
+On HP laptops, if the led infrastructure is activated, support for a led
+indicating disk protection will be provided as /sys/class/leds/hp::hddprotect.
 
 Another feature of the driver is misc device called "freefall" that
 acts similar to /dev/rtc and reacts on free-fall interrupts received
 from the device. It supports blocking operations, poll/select and
 fasync operation modes. You must read 1 bytes from the device.  The
 result is number of free-fall interrupts since the last successful
-read (or 255 if number of interrupts would not fit).
+read (or 255 if number of interrupts would not fit). See the hpfall.c
+file for an example on using the device.
 
 
 Axes orientation
@@ -55,7 +76,7 @@ the accelerometer are converted into a "standard" organisation of the axes
  * If the laptop is put upside-down, Z becomes negative
 
 If your laptop model is not recognized (cf "dmesg"), you can send an
-email to the authors to add it to the database.  When reporting a new
+email to the maintainer to add it to the database.  When reporting a new
 laptop, please include the output of "dmidecode" plus the value of
 /sys/devices/platform/lis3lv02d/position in these four cases.
 
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index 02b7489..b7e42ec 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -81,8 +81,14 @@ pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
 	   0 (stop) to 255 (full)
 
 pwm[1-4]_enable - this file controls mode of fan/temperature control:
-	* 1 Manual Mode, write to pwm file any value 0-255 (full speed)
-	* 2 Thermal Cruise
+	* 1 Manual mode, write to pwm file any value 0-255 (full speed)
+	* 2 "Thermal Cruise" mode
+	* 3 "Fan Speed Cruise" mode
+	* 4 "Smart Fan III" mode
+
+pwm[1-4]_mode - controls if output is PWM or DC level
+        * 0 DC output (0 - 12v)
+        * 1 PWM output
 
 Thermal Cruise mode
 -------------------
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index 7860aaf..0a74603 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -44,7 +44,7 @@ static struct i2c_driver foo_driver = {
 	/* if device autodetection is needed: */
 	.class		= I2C_CLASS_SOMETHING,
 	.detect		= foo_detect,
-	.address_data	= &addr_data,
+	.address_list	= normal_i2c,
 
 	.shutdown	= foo_shutdown,	/* optional */
 	.suspend	= foo_suspend,	/* optional */
diff --git a/Documentation/infiniband/ipoib.txt b/Documentation/infiniband/ipoib.txt
index 6d40f00..64eeb55 100644
--- a/Documentation/infiniband/ipoib.txt
+++ b/Documentation/infiniband/ipoib.txt
@@ -36,11 +36,11 @@ Datagram vs Connected modes
   fabric with a 2K MTU, the IPoIB MTU will be 2048 - 4 = 2044 bytes.
 
   In connected mode, the IB RC (Reliable Connected) transport is used.
-  Connected mode is to takes advantage of the connected nature of the
-  IB transport and allows an MTU up to the maximal IP packet size of
-  64K, which reduces the number of IP packets needed for handling
-  large UDP datagrams, TCP segments, etc and increases the performance
-  for large messages.
+  Connected mode takes advantage of the connected nature of the IB
+  transport and allows an MTU up to the maximal IP packet size of 64K,
+  which reduces the number of IP packets needed for handling large UDP
+  datagrams, TCP segments, etc and increases the performance for large
+  messages.
 
   In connected mode, the interface's UD QP is still used for multicast
   and communication with peers that don't support connected mode. In
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index 0fc9831..794941f 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -68,22 +68,38 @@ GigaSet 307x Device Driver
      for troubleshooting or to pass module parameters.
 
      The module ser_gigaset provides a serial line discipline N_GIGASET_M101
-     which drives the device through the regular serial line driver. It must
-     be attached to the serial line to which the M101 is connected with the
-     ldattach(8) command (requires util-linux-ng release 2.14 or later), for
-     example:
-	 ldattach GIGASET_M101 /dev/ttyS1
+     which uses the regular serial port driver to access the device, and must
+     therefore be attached to the serial device to which the M101 is connected.
+     The ldattach(8) command (included in util-linux-ng release 2.14 or later)
+     can be used for that purpose, for example:
+	ldattach GIGASET_M101 /dev/ttyS1
      This will open the device file, attach the line discipline to it, and
      then sleep in the background, keeping the device open so that the line
      discipline remains active. To deactivate it, kill the daemon, for example
      with
-	 killall ldattach
+	killall ldattach
      before disconnecting the device. To have this happen automatically at
      system startup/shutdown on an LSB compatible system, create and activate
      an appropriate LSB startup script /etc/init.d/gigaset. (The init name
      'gigaset' is officially assigned to this project by LANANA.)
      Alternatively, just add the 'ldattach' command line to /etc/rc.local.
 
+     The modules accept the following parameters:
+
+	Module	 	Parameter  Meaning
+
+	gigaset	 	debug	   debug level (see section 3.2.)
+
+			startmode  initial operation mode (see section 2.5.):
+	bas_gigaset )		   1=ISDN4linux/CAPI (default), 0=Unimodem
+	ser_gigaset )
+	usb_gigaset )	cidmode    initial Call-ID mode setting (see section
+				   2.5.): 1=on (default), 0=off
+
+     Depending on your distribution you may want to create a separate module
+     configuration file /etc/modprobe.d/gigaset for these, or add them to a
+     custom file like /etc/modprobe.conf.local.
+
 2.2. Device nodes for user space programs
      ------------------------------------
      The device can be accessed from user space (eg. by the user space tools
@@ -93,11 +109,48 @@ GigaSet 307x Device Driver
      - /dev/ttyGU0 for M105 (USB data boxes)
      - /dev/ttyGB0 for the base driver (direct USB connection)
 
-     You can also select a "default device" which is used by the frontends when
+     If you connect more than one device of a type, they will get consecutive
+     device nodes, eg. /dev/ttyGU1 for a second M105.
+
+     You can also set a "default device" for the user space tools to use when
      no device node is given as parameter, by creating a symlink /dev/ttyG to
      one of them, eg.:
 
-        ln -s /dev/ttyGB0 /dev/ttyG
+	ln -s /dev/ttyGB0 /dev/ttyG
+
+     The devices accept the following device specific ioctl calls
+     (defined in gigaset_dev.h):
+
+     ioctl(int fd, GIGASET_REDIR, int *cmd);
+     If cmd==1, the device is set to be controlled exclusively through the
+     character device node; access from the ISDN subsystem is blocked.
+     If cmd==0, the device is set to be used from the ISDN subsystem and does
+     not communicate through the character device node.
+
+     ioctl(int fd, GIGASET_CONFIG, int *cmd);
+     (ser_gigaset and usb_gigaset only)
+     If cmd==1, the device is set to adapter configuration mode where commands
+     are interpreted by the M10x DECT adapter itself instead of being
+     forwarded to the base station. In this mode, the device accepts the
+     commands described in Siemens document "AT-Kommando Alignment M10x Data"
+     for setting the operation mode, associating with a base station and
+     querying parameters like field strengh and signal quality.
+     Note that there is no ioctl command for leaving adapter configuration
+     mode and returning to regular operation. In order to leave adapter
+     configuration mode, write the command ATO to the device.
+
+     ioctl(int fd, GIGASET_BRKCHARS, unsigned char brkchars[6]);
+     (usb_gigaset only)
+     Set the break characters on an M105's internal serial adapter to the six
+     bytes stored in brkchars[]. Unused bytes should be set to zero.
+
+     ioctl(int fd, GIGASET_VERSION, unsigned version[4]);
+     Retrieve version information from the driver. version[0] must be set to
+     one of:
+     - GIGVER_DRIVER: retrieve driver version
+     - GIGVER_COMPAT: retrieve interface compatibility version
+     - GIGVER_FWBASE: retrieve the firmware version of the base
+     Upon return, version[] is filled with the requested version information.
 
 2.3. ISDN4linux
      ----------
@@ -113,15 +166,24 @@ GigaSet 307x Device Driver
          Connection State: 0, Response: -1
          gigaset_process_response: resp_code -1 in ConState 0 !
          Timeout occurred
-     you might need to use unimodem mode. (see section 2.5.)
+     you probably need to use unimodem mode. (see section 2.5.)
 
 2.4. CAPI
      ----
      If the driver is compiled with CAPI support (kernel configuration option
      GIGASET_CAPI, experimental) it can also be used with CAPI 2.0 kernel and
-     user space applications.  ISDN4Linux is supported in this configuration
+     user space applications. For user space access, the module capi.ko must
+     be loaded. The capiinit command (included in the capi4k-utils package)
+     does this for you.
+
+     The CAPI variant of the driver supports legacy ISDN4Linux applications
      via the capidrv compatibility driver. The kernel module capidrv.ko must
-     be loaded explicitly ("modprobe capidrv") if needed.
+     be loaded explicitly with the command
+        modprobe capidrv
+     if needed, and cannot be unloaded again without unloading the driver
+     first. (These are limitations of capidrv.)
+
+     The note about unimodem mode in the preceding section applies here, too.
 
 2.5. Unimodem mode
      -------------
@@ -134,9 +196,14 @@ GigaSet 307x Device Driver
      You can switch back using
          gigacontr --mode isdn
 
-     You can also load the driver using e.g.
-         modprobe usb_gigaset startmode=0
-     to prevent the driver from starting in "isdn4linux mode".
+     You can also put the driver directly into Unimodem mode when it's loaded,
+     by passing the module parameter startmode=0 to the hardware specific
+     module, e.g.
+	modprobe usb_gigaset startmode=0
+     or by adding a line like
+	options usb_gigaset startmode=0
+     to an appropriate module configuration file, like /etc/modprobe.d/gigaset
+     or /etc/modprobe.conf.local.
 
      In this mode the device works like a modem connected to a serial port
      (the /dev/ttyGU0, ... mentioned above) which understands the commands
@@ -164,9 +231,8 @@ GigaSet 307x Device Driver
 
         options ppp_async flag_time=0
 
-     to /etc/modprobe.conf. If your distribution has some local module
-     configuration file like /etc/modprobe.conf.local,
-     using that should be preferred.
+     to an appropriate module configuration file, like /etc/modprobe.d/gigaset
+     or /etc/modprobe.conf.local.
 
 2.6. Call-ID (CID) mode
      ------------------
@@ -189,12 +255,13 @@ GigaSet 307x Device Driver
        settings (CID mode).
      - If you have several DECT data devices (M10x) which you want to use
        in turn, select Unimodem mode by passing the parameter "cidmode=0" to
-       the driver ("modprobe usb_gigaset cidmode=0" or modprobe.conf).
+       the appropriate driver module (ser_gigaset or usb_gigaset).
 
      If you want both of these at once, you are out of luck.
 
-     You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode
-     setting (ttyGxy is ttyGU0 or ttyGB0).
+     You can also use the tty class parameter "cidmode" of the device to
+     change its CID mode while the driver is loaded, eg.
+        echo 0 > /sys/class/tty/ttyGU0/cidmode
 
 2.7. Unregistered Wireless Devices (M101/M105)
      -----------------------------------------
@@ -208,7 +275,7 @@ GigaSet 307x Device Driver
      driver. In that situation, a restricted set of functions is available
      which includes, in particular, those necessary for registering the device
      to a base or for switching it between Fixed Part and Portable Part
-     modes.
+     modes. See the gigacontr(8) manpage for details.
 
 3.   Troubleshooting
      ---------------
@@ -222,9 +289,7 @@ GigaSet 307x Device Driver
 
            options isdn dialtimeout=15
 
-        to /etc/modprobe.conf. If your distribution has some local module
-        configuration file like /etc/modprobe.conf.local,
-        using that should be preferred.
+        to /etc/modprobe.d/gigaset, /etc/modprobe.conf.local or a similar file.
 
      Problem:
         Your isdn script aborts with a message about isdnlog.
@@ -264,7 +329,8 @@ GigaSet 307x Device Driver
      The initial value can be set using the debug parameter when loading the
      module "gigaset", e.g. by adding a line
         options gigaset debug=0
-     to /etc/modprobe.conf, ...
+     to your module configuration file, eg. /etc/modprobe.d/gigaset or
+     /etc/modprobe.conf.local.
 
      Generated debugging information can be found
      - as output of the command
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 777dc8a..5ba4d9d 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1032,7 +1032,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			No delay
 
 	ip=		[IP_PNP]
-			See Documentation/filesystems/nfsroot.txt.
+			See Documentation/filesystems/nfs/nfsroot.txt.
 
 	ip2=		[HW] Set IO/IRQ pairs for up to 4 IntelliPort boards
 			See comment before ip2_setup() in
@@ -1553,10 +1553,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			going to be removed in 2.6.29.
 
 	nfsaddrs=	[NFS]
-			See Documentation/filesystems/nfsroot.txt.
+			See Documentation/filesystems/nfs/nfsroot.txt.
 
 	nfsroot=	[NFS] nfs root filesystem for disk-less boxes.
-			See Documentation/filesystems/nfsroot.txt.
+			See Documentation/filesystems/nfs/nfsroot.txt.
 
 	nfs.callback_tcpport=
 			[NFS] set the TCP port on which the NFSv4 callback
@@ -1787,6 +1787,11 @@ and is between 256 and 4096 characters. It is defined in the file
 			waiting for the ACK, so if this is set too high
 			interrupts *may* be lost!
 
+	omap_mux=	[OMAP] Override bootloader pin multiplexing.
+			Format: <mux_mode0.mode_name=value>...
+			For example, to override I2C bus2:
+			omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
+
 	opl3=		[HW,OSS]
 			Format: <io>
 
@@ -2663,6 +2668,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			to a common usb-storage quirk flag as follows:
 				a = SANE_SENSE (collect more than 18 bytes
 					of sense data);
+				b = BAD_SENSE (don't collect more than 18
+					bytes of sense data);
 				c = FIX_CAPACITY (decrease the reported
 					device capacity by one sector);
 				h = CAPACITY_HEURISTICS (decrease the
@@ -2722,6 +2729,11 @@ and is between 256 and 4096 characters. It is defined in the file
 	vmpoff=		[KNL,S390] Perform z/VM CP command after power off.
 			Format: <command>
 
+	vt.cur_default=	[VT] Default cursor shape.
+			Format: 0xCCBBAA, where AA, BB, and CC are the same as
+			the parameters of the <Esc>[?A;B;Cc escape sequence;
+			see VGA-softcursor.txt. Default: 2 = underline.
+
 	vt.default_blu=	[VT]
 			Format: <blue0>,<blue1>,<blue2>,...,<blue15>
 			Change the default blue palette of the console.
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index aafcaa6..169091f 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.23
-                          April 10th, 2009
+                            Version 0.24
+                        December 11th,  2009
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -460,6 +460,8 @@ event	code	Key		Notes
 				For Lenovo ThinkPads with a new
 				BIOS, it has to be handled either
 				by the ACPI OSI, or by userspace.
+				The driver does the right thing,
+				never mess with this.
 0x1011	0x10	FN+END		Brightness down.  See brightness
 				up for details.
 
@@ -582,46 +584,15 @@ with hotkey_report_mode.
 
 Brightness hotkey notes:
 
-These are the current sane choices for brightness key mapping in
-thinkpad-acpi:
+Don't mess with the brightness hotkeys in a Thinkpad.  If you want
+notifications for OSD, use the sysfs backlight class event support.
 
-For IBM and Lenovo models *without* ACPI backlight control (the ones on
-which thinkpad-acpi will autoload its backlight interface by default,
-and on which ACPI video does not export a backlight interface):
-
-1. Don't enable or map the brightness hotkeys in thinkpad-acpi, as
-   these older firmware versions unfortunately won't respect the hotkey
-   mask for brightness keys anyway, and always reacts to them.  This
-   usually work fine, unless X.org drivers are doing something to block
-   the BIOS.  In that case, use (3) below.  This is the default mode of
-   operation.
-
-2. Enable the hotkeys, but map them to something else that is NOT
-   KEY_BRIGHTNESS_UP/DOWN or any other keycode that would cause
-   userspace to try to change the backlight level, and use that as an
-   on-screen-display hint.
-
-3. IF AND ONLY IF X.org drivers find a way to block the firmware from
-   automatically changing the brightness, enable the hotkeys and map
-   them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN, and feed that to
-   something that calls xbacklight.  thinkpad-acpi will not be able to
-   change brightness in that case either, so you should disable its
-   backlight interface.
-
-For Lenovo models *with* ACPI backlight control:
-
-1. Load up ACPI video and use that.  ACPI video will report ACPI
-   events for brightness change keys.  Do not mess with thinkpad-acpi
-   defaults in this case.  thinkpad-acpi should not have anything to do
-   with backlight events in a scenario where ACPI video is loaded:
-   brightness hotkeys must be disabled, and the backlight interface is
-   to be kept disabled as well.  This is the default mode of operation.
-
-2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi,
-   and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN.  Process
-   these keys on userspace somehow (e.g. by calling xbacklight).
-   The driver will do this automatically if it detects that ACPI video
-   has been disabled.
+The driver will issue KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN events
+automatically for the cases were userspace has to do something to
+implement brightness changes.  When you override these events, you will
+either fail to handle properly the ThinkPads that require explicit
+action to change backlight brightness, or the ThinkPads that require
+that no action be taken to work properly.
 
 
 Bluetooth
@@ -1121,25 +1092,61 @@ WARNING:
     its level up and down at every change.
 
 
-Volume control -- /proc/acpi/ibm/volume
----------------------------------------
+Volume control
+--------------
+
+procfs: /proc/acpi/ibm/volume
+ALSA: "ThinkPad Console Audio Control", default ID: "ThinkPadEC"
+
+NOTE: by default, the volume control interface operates in read-only
+mode, as it is supposed to be used for on-screen-display purposes.
+The read/write mode can be enabled through the use of the
+"volume_control=1" module parameter.
 
-This feature allows volume control on ThinkPad models which don't have
-a hardware volume knob. The available commands are:
+NOTE: distros are urged to not enable volume_control by default, this
+should be done by the local admin only.  The ThinkPad UI is for the
+console audio control to be done through the volume keys only, and for
+the desktop environment to just provide on-screen-display feedback.
+Software volume control should be done only in the main AC97/HDA
+mixer.
+
+This feature allows volume control on ThinkPad models with a digital
+volume knob (when available, not all models have it), as well as
+mute/unmute control.  The available commands are:
 
 	echo up   >/proc/acpi/ibm/volume
 	echo down >/proc/acpi/ibm/volume
 	echo mute >/proc/acpi/ibm/volume
+	echo unmute >/proc/acpi/ibm/volume
 	echo 'level <level>' >/proc/acpi/ibm/volume
 
-The <level> number range is 0 to 15 although not all of them may be
+The <level> number range is 0 to 14 although not all of them may be
 distinct. The unmute the volume after the mute command, use either the
-up or down command (the level command will not unmute the volume).
+up or down command (the level command will not unmute the volume), or
+the unmute command.
+
 The current volume level and mute state is shown in the file.
 
-The ALSA mixer interface to this feature is still missing, but patches
-to add it exist.  That problem should be addressed in the not so
-distant future.
+You can use the volume_capabilities parameter to tell the driver
+whether your thinkpad has volume control or mute-only control:
+volume_capabilities=1 for mixers with mute and volume control,
+volume_capabilities=2 for mixers with only mute control.
+
+If the driver misdetects the capabilities for your ThinkPad model,
+please report this to ibm-acpi-devel@lists.sourceforge.net, so that we
+can update the driver.
+
+There are two strategies for volume control.  To select which one
+should be used, use the volume_mode module parameter: volume_mode=1
+selects EC mode, and volume_mode=3 selects EC mode with NVRAM backing
+(so that volume/mute changes are remembered across shutdown/reboot).
+
+The driver will operate in volume_mode=3 by default. If that does not
+work well on your ThinkPad model, please report this to
+ibm-acpi-devel@lists.sourceforge.net.
+
+The driver supports the standard ALSA module parameters.  If the ALSA
+mixer is disabled, the driver will disable all volume functionality.
 
 
 Fan control and monitoring: fan speed, fan enable/disable
@@ -1405,6 +1412,7 @@ to enable more than one output class, just add their values.
 	0x0008			HKEY event interface, hotkeys
 	0x0010			Fan control
 	0x0020			Backlight brightness
+	0x0040			Audio mixer/volume control
 
 There is also a kernel build option to enable more debugging
 information, which may be necessary to debug driver problems.
@@ -1465,3 +1473,9 @@ Sysfs interface changelog:
 		and it is always able to disable hot keys.  Very old
 		thinkpads are properly supported.  hotkey_bios_mask
 		is deprecated and marked for removal.
+
+0x020600:	Marker for backlight change event support.
+
+0x020700:	Support for mute-only mixers.
+		Volume control in read-only mode by default.
+		Marker for ALSA mixer support.
diff --git a/Documentation/lockstat.txt b/Documentation/lockstat.txt
index 9cb9138..65f4c79 100644
--- a/Documentation/lockstat.txt
+++ b/Documentation/lockstat.txt
@@ -62,8 +62,20 @@ applicable).
 It also tracks 4 contention points per class. A contention point is a call site
 that had to wait on lock acquisition.
 
+ - CONFIGURATION
+
+Lock statistics are enabled via CONFIG_LOCK_STATS.
+
  - USAGE
 
+Enable collection of statistics:
+
+# echo 1 >/proc/sys/kernel/lock_stat
+
+Disable collection of statistics:
+
+# echo 0 >/proc/sys/kernel/lock_stat
+
 Look at the current lock statistics:
 
 ( line numbers not part of actual output, done for clarity in the explanation
diff --git a/Documentation/md.txt b/Documentation/md.txt
index 4edd39e..188f476 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -233,9 +233,9 @@ All md devices contain:
 
   resync_start
      The point at which resync should start.  If no resync is needed,
-     this will be a very large number.  At array creation it will
-     default to 0, though starting the array as 'clean' will
-     set it much larger.
+     this will be a very large number (or 'none' since 2.6.30-rc1).  At
+     array creation it will default to 0, though starting the array as
+     'clean' will set it much larger.
 
    new_dev
      This file can be written but not read.  The value written should
@@ -296,6 +296,51 @@ All md devices contain:
      active-idle
          like active, but no writes have been seen for a while (safe_mode_delay).
 
+  bitmap/location
+     This indicates where the write-intent bitmap for the array is
+     stored.
+     It can be one of "none", "file" or "[+-]N".
+     "file" may later be extended to "file:/file/name"
+     "[+-]N" means that many sectors from the start of the metadata.
+       This is replicated on all devices.  For arrays with externally
+       managed metadata, the offset is from the beginning of the
+       device.
+  bitmap/chunksize
+     The size, in bytes, of the chunk which will be represented by a
+     single bit.  For RAID456, it is a portion of an individual
+     device. For RAID10, it is a portion of the array.  For RAID1, it
+     is both (they come to the same thing).
+  bitmap/time_base
+     The time, in seconds, between looking for bits in the bitmap to
+     be cleared. In the current implementation, a bit will be cleared
+     between 2 and 3 times "time_base" after all the covered blocks
+     are known to be in-sync.
+  bitmap/backlog
+     When write-mostly devices are active in a RAID1, write requests
+     to those devices proceed in the background - the filesystem (or
+     other user of the device) does not have to wait for them.
+     'backlog' sets a limit on the number of concurrent background
+     writes.  If there are more than this, new writes will by
+     synchronous.
+  bitmap/metadata
+     This can be either 'internal' or 'external'.
+     'internal' is the default and means the metadata for the bitmap
+     is stored in the first 256 bytes of the allocated space and is
+     managed by the md module.
+     'external' means that bitmap metadata is managed externally to
+     the kernel (i.e. by some userspace program)
+  bitmap/can_clear
+     This is either 'true' or 'false'.  If 'true', then bits in the
+     bitmap will be cleared when the corresponding blocks are thought
+     to be in-sync.  If 'false', bits will never be cleared.
+     This is automatically set to 'false' if a write happens on a
+     degraded array, or if the array becomes degraded during a write.
+     When metadata is managed externally, it should be set to true
+     once the array becomes non-degraded, and this fact has been
+     recorded in the metadata.
+     
+     
+     
 
 As component devices are added to an md array, they appear in the 'md'
 directory as new directories named
@@ -334,8 +379,9 @@ Each directory contains:
 	Writing "writemostly" sets the writemostly flag.
 	Writing "-writemostly" clears the writemostly flag.
 	Writing "blocked" sets the "blocked" flag.
-	Writing "-blocked" clear the "blocked" flag and allows writes
+	Writing "-blocked" clears the "blocked" flag and allows writes
 		to complete.
+	Writing "in_sync" sets the in_sync flag.
 
 	This file responds to select/poll. Any change to 'faulty'
 	or 'blocked' causes an event.
@@ -372,6 +418,24 @@ Each directory contains:
         array.  If a value less than the current component_size is
         written, it will be rejected.
 
+      recovery_start
+
+        When the device is not 'in_sync', this records the number of
+	sectors from the start of the device which are known to be
+	correct.  This is normally zero, but during a recovery
+	operation is will steadily increase, and if the recovery is
+	interrupted, restoring this value can cause recovery to
+	avoid repeating the earlier blocks.  With v1.x metadata, this
+	value is saved and restored automatically.
+
+	This can be set whenever the device is not an active member of
+	the array, either before the array is activated, or before
+	the 'slot' is set.
+
+	Setting this to 'none' is equivalent to setting 'in_sync'.
+	Setting to any other value also clears the 'in_sync' flag.
+	
+
 
 An active md device will also contain and entry for each active device
 in the array.  These are named
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index bbc8a6a..57e7e9c 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -160,12 +160,15 @@ Under each section, you can see 4 files.
 NOTE:
   These directories/files appear after physical memory hotplug phase.
 
-If CONFIG_NUMA is enabled the
-/sys/devices/system/memory/memoryXXX memory section
-directories can also be accessed via symbolic links located in
-the /sys/devices/system/node/node* directories.  For example:
+If CONFIG_NUMA is enabled the memoryXXX/ directories can also be accessed
+via symbolic links located in the /sys/devices/system/node/node* directories.
+
+For example:
 /sys/devices/system/node/node0/memory9 -> ../../memory/memory9
 
+A backlink will also be created:
+/sys/devices/system/memory/memory9/node0 -> ../../node/node0
+
 --------------------------------
 4. Physical memory hot-add phase
 --------------------------------
diff --git a/Documentation/misc-devices/ad525x_dpot.txt b/Documentation/misc-devices/ad525x_dpot.txt
new file mode 100644
index 0000000..0c9413b
--- /dev/null
+++ b/Documentation/misc-devices/ad525x_dpot.txt
@@ -0,0 +1,57 @@
+---------------------------------
+  AD525x Digital Potentiometers
+---------------------------------
+
+The ad525x_dpot driver exports a simple sysfs interface.  This allows you to
+work with the immediate resistance settings as well as update the saved startup
+settings.  Access to the factory programmed tolerance is also provided, but
+interpretation of this settings is required by the end application according to
+the specific part in use.
+
+---------
+  Files
+---------
+
+Each dpot device will have a set of eeprom, rdac, and tolerance files.  How
+many depends on the actual part you have, as will the range of allowed values.
+
+The eeprom files are used to program the startup value of the device.
+
+The rdac files are used to program the immediate value of the device.
+
+The tolerance files are the read-only factory programmed tolerance settings
+and may vary greatly on a part-by-part basis.  For exact interpretation of
+this field, please consult the datasheet for your part.  This is presented
+as a hex file for easier parsing.
+
+-----------
+  Example
+-----------
+
+Locate the device in your sysfs tree.  This is probably easiest by going into
+the common i2c directory and locating the device by the i2c slave address.
+
+	# ls /sys/bus/i2c/devices/
+	0-0022  0-0027  0-002f
+
+So assuming the device in question is on the first i2c bus and has the slave
+address of 0x2f, we descend (unrelated sysfs entries have been trimmed).
+
+	# ls /sys/bus/i2c/devices/0-002f/
+	eeprom0 rdac0 tolerance0
+
+You can use simple reads/writes to access these files:
+
+	# cd /sys/bus/i2c/devices/0-002f/
+
+	# cat eeprom0
+	0
+	# echo 10 > eeprom0
+	# cat eeprom0
+	10
+
+	# cat rdac0
+	5
+	# echo 3 > rdac0
+	# cat rdac0
+	3
diff --git a/Documentation/nommu-mmap.txt b/Documentation/nommu-mmap.txt
index b565e82..8e1ddec 100644
--- a/Documentation/nommu-mmap.txt
+++ b/Documentation/nommu-mmap.txt
@@ -119,6 +119,32 @@ FURTHER NOTES ON NO-MMU MMAP
      granule but will only discard the excess if appropriately configured as
      this has an effect on fragmentation.
 
+ (*) The memory allocated by a request for an anonymous mapping will normally
+     be cleared by the kernel before being returned in accordance with the
+     Linux man pages (ver 2.22 or later).
+
+     In the MMU case this can be achieved with reasonable performance as
+     regions are backed by virtual pages, with the contents only being mapped
+     to cleared physical pages when a write happens on that specific page
+     (prior to which, the pages are effectively mapped to the global zero page
+     from which reads can take place).  This spreads out the time it takes to
+     initialize the contents of a page - depending on the write-usage of the
+     mapping.
+
+     In the no-MMU case, however, anonymous mappings are backed by physical
+     pages, and the entire map is cleared at allocation time.  This can cause
+     significant delays during a userspace malloc() as the C library does an
+     anonymous mapping and the kernel then does a memset for the entire map.
+
+     However, for memory that isn't required to be precleared - such as that
+     returned by malloc() - mmap() can take a MAP_UNINITIALIZED flag to
+     indicate to the kernel that it shouldn't bother clearing the memory before
+     returning it.  Note that CONFIG_MMAP_ALLOW_UNINITIALIZED must be enabled
+     to permit this, otherwise the flag will be ignored.
+
+     uClibc uses this to speed up malloc(), and the ELF-FDPIC binfmt uses this
+     to allocate the brk and stack region.
+
  (*) A list of all the private copy and anonymous mappings on the system is
      visible through /proc/maps in no-MMU mode.
 
diff --git a/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt b/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt
new file mode 100644
index 0000000..515ebcf
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt
@@ -0,0 +1,93 @@
+PPC440SPe DMA/XOR (DMA Controller and XOR Accelerator)
+
+Device nodes needed for operation of the ppc440spe-adma driver
+are specified hereby. These are I2O/DMA, DMA and XOR nodes
+for DMA engines and Memory Queue Module node. The latter is used
+by ADMA driver for configuration of RAID-6 H/W capabilities of
+the PPC440SPe. In addition to the nodes and properties described
+below, the ranges property of PLB node must specify ranges for
+DMA devices.
+
+ i) The I2O node
+
+ Required properties:
+
+ - compatible		: "ibm,i2o-440spe";
+ - reg			: <registers mapping>
+ - dcr-reg		: <DCR registers range>
+
+ Example:
+
+	I2O: i2o@400100000 {
+		compatible = "ibm,i2o-440spe";
+		reg = <0x00000004 0x00100000 0x100>;
+		dcr-reg = <0x060 0x020>;
+	};
+
+
+ ii) The DMA node
+
+ Required properties:
+
+ - compatible		: "ibm,dma-440spe";
+ - cell-index		: 1 cell, hardware index of the DMA engine
+			  (typically 0x0 and 0x1 for DMA0 and DMA1)
+ - reg			: <registers mapping>
+ - dcr-reg		: <DCR registers range>
+ - interrupts		: <interrupt mapping for DMA0/1 interrupts sources:
+			   2 sources: DMAx CS FIFO Needs Service IRQ (on UIC0)
+			   and DMA Error IRQ (on UIC1). The latter is common
+			   for both DMA engines>.
+ - interrupt-parent	: needed for interrupt mapping
+
+ Example:
+
+	DMA0: dma0@400100100 {
+		compatible = "ibm,dma-440spe";
+		cell-index = <0>;
+		reg = <0x00000004 0x00100100 0x100>;
+		dcr-reg = <0x060 0x020>;
+		interrupt-parent = <&DMA0>;
+		interrupts = <0 1>;
+		#interrupt-cells = <1>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		interrupt-map = <
+			0 &UIC0 0x14 4
+			1 &UIC1 0x16 4>;
+	};
+
+
+ iii) XOR Accelerator node
+
+ Required properties:
+
+ - compatible		: "amcc,xor-accelerator";
+ - reg			: <registers mapping>
+ - interrupts		: <interrupt mapping for XOR interrupt source>
+ - interrupt-parent	: for interrupt mapping
+
+ Example:
+
+	xor-accel@400200000 {
+		compatible = "amcc,xor-accelerator";
+		reg = <0x00000004 0x00200000 0x400>;
+		interrupt-parent = <&UIC1>;
+		interrupts = <0x1f 4>;
+	};
+
+
+ iv) Memory Queue Module node
+
+ Required properties:
+
+ - compatible		: "ibm,mq-440spe";
+ - dcr-reg		: <DCR registers range>
+
+ Example:
+
+	MQ0: mq {
+		compatible = "ibm,mq-440spe";
+		dcr-reg = <0x040 0x020>;
+	};
+
diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt
index e8b5bc2..39e9415 100644
--- a/Documentation/powerpc/dts-bindings/fsl/board.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/board.txt
@@ -20,12 +20,16 @@ Required properities:
 - compatible : should be "fsl,fpga-pixis".
 - reg : should contain the address and the length of the FPPGA register
   set.
+- interrupt-parent: should specify phandle for the interrupt controller.
+- interrupts : should specify event (wakeup) IRQ.
 
 Example (MPC8610HPCD):
 
 	board-control@e8000000 {
 		compatible = "fsl,fpga-pixis";
 		reg = <0xe8000000 32>;
+		interrupt-parent = <&mpic>;
+		interrupts = <8 8>;
 	};
 
 * Freescale BCSR GPIO banks
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
index cabc780..5c6602d 100644
--- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
@@ -103,7 +103,22 @@ fsl,mpc5200-gpt nodes
 ---------------------
 On the mpc5200 and 5200b, GPT0 has a watchdog timer function.  If the board
 design supports the internal wdt, then the device node for GPT0 should
-include the empty property 'fsl,has-wdt'.
+include the empty property 'fsl,has-wdt'.  Note that this does not activate
+the watchdog.  The timer will function as a GPT if the timer api is used, and
+it will function as watchdog if the watchdog device is used.  The watchdog
+mode has priority over the gpt mode, i.e. if the watchdog is activated, any
+gpt api call to this timer will fail with -EBUSY.
+
+If you add the property
+	fsl,wdt-on-boot = <n>;
+GPT0 will be marked as in-use watchdog, i.e. blocking every gpt access to it.
+If n>0, the watchdog is started with a timeout of n seconds.  If n=0, the
+configuration of the watchdog is not touched.  This is useful in two cases:
+- just mark GPT0 as watchdog, blocking gpt accesses, and configure it later;
+- do not touch a configuration assigned by the boot loader which supervises
+  the boot process itself.
+
+The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option.
 
 An mpc5200-gpt can be used as a single line GPIO controller.  To do so,
 add the following properties to the gpt node:
diff --git a/Documentation/powerpc/dts-bindings/nintendo/gamecube.txt b/Documentation/powerpc/dts-bindings/nintendo/gamecube.txt
new file mode 100644
index 0000000..b558585
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/nintendo/gamecube.txt
@@ -0,0 +1,109 @@
+
+Nintendo GameCube device tree
+=============================
+
+1) The "flipper" node
+
+  This node represents the multi-function "Flipper" chip, which packages
+  many of the devices found in the Nintendo GameCube.
+
+  Required properties:
+
+   - compatible : Should be "nintendo,flipper"
+
+1.a) The Video Interface (VI) node
+
+  Represents the interface between the graphics processor and a external
+  video encoder.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-vi"
+   - reg : should contain the VI registers location and length
+   - interrupts : should contain the VI interrupt
+
+1.b) The Processor Interface (PI) node
+
+  Represents the data and control interface between the main processor
+  and graphics and audio processor.
+
+  Required properties:
+
+  - compatible : should be "nintendo,flipper-pi"
+  - reg : should contain the PI registers location and length
+
+1.b.i) The "Flipper" interrupt controller node
+
+  Represents the interrupt controller within the "Flipper" chip.
+  The node for the "Flipper" interrupt controller must be placed under
+  the PI node.
+
+  Required properties:
+
+  - compatible : should be "nintendo,flipper-pic"
+
+1.c) The Digital Signal Procesor (DSP) node
+
+  Represents the digital signal processor interface, designed to offload
+  audio related tasks.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-dsp"
+   - reg : should contain the DSP registers location and length
+   - interrupts : should contain the DSP interrupt
+
+1.c.i) The Auxiliary RAM (ARAM) node
+
+  Represents the non cpu-addressable ram designed mainly to store audio
+  related information.
+  The ARAM node must be placed under the DSP node.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-aram"
+   - reg : should contain the ARAM start (zero-based) and length
+
+1.d) The Disk Interface (DI) node
+
+  Represents the interface used to communicate with mass storage devices.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-di"
+   - reg : should contain the DI registers location and length
+   - interrupts : should contain the DI interrupt
+
+1.e) The Audio Interface (AI) node
+
+  Represents the interface to the external 16-bit stereo digital-to-analog
+  converter.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-ai"
+   - reg : should contain the AI registers location and length
+   - interrupts : should contain the AI interrupt
+
+1.f) The Serial Interface (SI) node
+
+  Represents the interface to the four single bit serial interfaces.
+  The SI is a proprietary serial interface used normally to control gamepads.
+  It's NOT a RS232-type interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-si"
+   - reg : should contain the SI registers location and length
+   - interrupts : should contain the SI interrupt
+
+1.g) The External Interface (EXI) node
+
+  Represents the multi-channel SPI-like interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-exi"
+   - reg : should contain the EXI registers location and length
+   - interrupts : should contain the EXI interrupt
+
diff --git a/Documentation/powerpc/dts-bindings/nintendo/wii.txt b/Documentation/powerpc/dts-bindings/nintendo/wii.txt
new file mode 100644
index 0000000..a7e155a
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/nintendo/wii.txt
@@ -0,0 +1,184 @@
+
+Nintendo Wii device tree
+========================
+
+0) The root node
+
+  This node represents the Nintendo Wii video game console.
+
+  Required properties:
+
+   - model : Should be "nintendo,wii"
+   - compatible : Should be "nintendo,wii"
+
+1) The "hollywood" node
+
+  This node represents the multi-function "Hollywood" chip, which packages
+  many of the devices found in the Nintendo Wii.
+
+  Required properties:
+
+   - compatible : Should be "nintendo,hollywood"
+
+1.a) The Video Interface (VI) node
+
+  Represents the interface between the graphics processor and a external
+  video encoder.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-vi","nintendo,flipper-vi"
+   - reg : should contain the VI registers location and length
+   - interrupts : should contain the VI interrupt
+
+1.b) The Processor Interface (PI) node
+
+  Represents the data and control interface between the main processor
+  and graphics and audio processor.
+
+  Required properties:
+
+  - compatible : should be "nintendo,hollywood-pi","nintendo,flipper-pi"
+  - reg : should contain the PI registers location and length
+
+1.b.i) The "Flipper" interrupt controller node
+
+  Represents the "Flipper" interrupt controller within the "Hollywood" chip.
+  The node for the "Flipper" interrupt controller must be placed under
+  the PI node.
+
+  Required properties:
+
+  - #interrupt-cells : <1>
+  - compatible : should be "nintendo,flipper-pic"
+  - interrupt-controller
+
+1.c) The Digital Signal Procesor (DSP) node
+
+  Represents the digital signal processor interface, designed to offload
+  audio related tasks.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-dsp","nintendo,flipper-dsp"
+   - reg : should contain the DSP registers location and length
+   - interrupts : should contain the DSP interrupt
+
+1.d) The Serial Interface (SI) node
+
+  Represents the interface to the four single bit serial interfaces.
+  The SI is a proprietary serial interface used normally to control gamepads.
+  It's NOT a RS232-type interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-si","nintendo,flipper-si"
+   - reg : should contain the SI registers location and length
+   - interrupts : should contain the SI interrupt
+
+1.e) The Audio Interface (AI) node
+
+  Represents the interface to the external 16-bit stereo digital-to-analog
+  converter.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-ai","nintendo,flipper-ai"
+   - reg : should contain the AI registers location and length
+   - interrupts : should contain the AI interrupt
+
+1.f) The External Interface (EXI) node
+
+  Represents the multi-channel SPI-like interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-exi","nintendo,flipper-exi"
+   - reg : should contain the EXI registers location and length
+   - interrupts : should contain the EXI interrupt
+
+1.g) The Open Host Controller Interface (OHCI) nodes
+
+  Represent the USB 1.x Open Host Controller Interfaces.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-usb-ohci","usb-ohci"
+   - reg : should contain the OHCI registers location and length
+   - interrupts : should contain the OHCI interrupt
+
+1.h) The Enhanced Host Controller Interface (EHCI) node
+
+  Represents the USB 2.0 Enhanced Host Controller Interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-usb-ehci","usb-ehci"
+   - reg : should contain the EHCI registers location and length
+   - interrupts : should contain the EHCI interrupt
+
+1.i) The Secure Digital Host Controller Interface (SDHCI) nodes
+
+  Represent the Secure Digital Host Controller Interfaces.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-sdhci","sdhci"
+   - reg : should contain the SDHCI registers location and length
+   - interrupts : should contain the SDHCI interrupt
+
+1.j) The Inter-Processsor Communication (IPC) node
+
+  Represent the Inter-Processor Communication interface. This interface
+  enables communications between the Broadway and the Starlet processors.
+
+   - compatible : should be "nintendo,hollywood-ipc"
+   - reg : should contain the IPC registers location and length
+   - interrupts : should contain the IPC interrupt
+
+1.k) The "Hollywood" interrupt controller node
+
+  Represents the "Hollywood" interrupt controller within the
+  "Hollywood" chip.
+
+  Required properties:
+
+  - #interrupt-cells : <1>
+  - compatible : should be "nintendo,hollywood-pic"
+  - reg : should contain the controller registers location and length
+  - interrupt-controller
+  - interrupts : should contain the cascade interrupt of the "flipper" pic
+  - interrupt-parent: should contain the phandle of the "flipper" pic
+
+1.l) The General Purpose I/O (GPIO) controller node
+
+  Represents the dual access 32 GPIO controller interface.
+
+  Required properties:
+
+  - #gpio-cells : <2>
+  - compatible : should be "nintendo,hollywood-gpio"
+  - reg : should contain the IPC registers location and length
+  - gpio-controller
+
+1.m) The control node
+
+  Represents the control interface used to setup several miscellaneous
+  settings of the "Hollywood" chip like boot memory mappings, resets,
+  disk interface mode, etc.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-control"
+   - reg : should contain the control registers location and length
+
+1.n) The Disk Interface (DI) node
+
+  Represents the interface used to communicate with mass storage devices.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-di"
+   - reg : should contain the DI registers location and length
+   - interrupts : should contain the DI interrupt
+
diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt
index 80339fe..ea68046 100644
--- a/Documentation/powerpc/dts-bindings/xilinx.txt
+++ b/Documentation/powerpc/dts-bindings/xilinx.txt
@@ -292,4 +292,15 @@
        - reg-offset : A value of 3 is required
        - reg-shift : A value of 2 is required
 
+      vii) Xilinx USB Host controller
+
+      The Xilinx USB host controller is EHCI compatible but with a different
+      base address for the EHCI registers, and it is always a big-endian
+      USB Host controller. The hardware can be configured as high speed only,
+      or high speed/full speed hybrid.
+
+      Required properties:
+      - xlnx,support-usb-fs: A value 0 means the core is built as high speed
+                             only. A value 1 means the core also supports
+                             full speed devices.
 
diff --git a/Documentation/serial/hayes-esp.txt b/Documentation/serial/hayes-esp.txt
deleted file mode 100644
index 09b5d58..0000000
--- a/Documentation/serial/hayes-esp.txt
+++ /dev/null
@@ -1,154 +0,0 @@
-HAYES ESP DRIVER VERSION 2.1
-
-A big thanks to the people at Hayes, especially Alan Adamson.  Their support
-has enabled me to provide enhancements to the driver.
-
-Please report your experiences with this driver to me (arobinso@nyx.net).  I
-am looking for both positive and negative feedback.
-
-*** IMPORTANT CHANGES FOR 2.1 ***
-Support for PIO mode.  Five situations will cause PIO mode to be used:
-1) A multiport card is detected.  PIO mode will always be used.  (8 port cards
-do not support DMA).
-2) The DMA channel is set to an invalid value (anything other than 1 or 3).
-3) The DMA buffer/channel could not be allocated.  The port will revert to PIO
-mode until it is reopened.
-4) Less than a specified number of bytes need to be transferred to/from the
-FIFOs.  PIO mode will be used for that transfer only.
-5) A port needs to do a DMA transfer and another port is already using the
-DMA channel.  PIO mode will be used for that transfer only.
-
-Since the Hayes ESP seems to conflict with other cards (notably sound cards)
-when using DMA, DMA is turned off by default.  To use DMA, it must be turned
-on explicitly, either with the "dma=" option described below or with
-setserial.  A multiport card can be forced into DMA mode by using setserial;
-however, most multiport cards don't support DMA.
-
-The latest version of setserial allows the enhanced configuration of the ESP
-card to be viewed and modified.
-***
-
-This package contains the files needed to compile a module to support the Hayes
-ESP card.  The drivers are basically a modified version of the serial drivers.
-
-Features:
-
-- Uses the enhanced mode of the ESP card, allowing a wider range of
-  interrupts and features than compatibility mode
-- Uses DMA and 16 bit PIO mode to transfer data to and from the ESP's FIFOs,
-  reducing CPU load
-- Supports primary and secondary ports
-
-
-If the driver is compiled as a module, the IRQs to use can be specified by
-using the irq= option.  The format is:
-
-irq=[0x100],[0x140],[0x180],[0x200],[0x240],[0x280],[0x300],[0x380]
-
-The address in brackets is the base address of the card.  The IRQ of
-nonexistent cards can be set to 0.  If an IRQ of a card that does exist is set
-to 0, the driver will attempt to guess at the correct IRQ.  For example, to set
-the IRQ of the card at address 0x300 to 12, the insmod command would be:
-
-insmod esp irq=0,0,0,0,0,0,12,0
-
-The custom divisor can be set by using the divisor= option.  The format is the
-same as for the irq= option.  Each divisor value is a series of hex digits,
-with each digit representing the divisor to use for a corresponding port.  The
-divisor value is constructed RIGHT TO LEFT.  Specifying a nonzero divisor value
-will automatically set the spd_cust flag.  To calculate the divisor to use for
-a certain baud rate, divide the port's base baud (generally 921600) by the
-desired rate.  For example, to set the divisor of the primary port at 0x300 to
-4 and the divisor of the secondary port at 0x308 to 8, the insmod command would
-be:
-
-insmod esp divisor=0,0,0,0,0,0,0x84,0
-
-The dma= option can be used to set the DMA channel.  The channel can be either
-1 or 3.  Specifying any other value will force the driver to use PIO mode.
-For example, to set the DMA channel to 3, the insmod command would be:
-
-insmod esp dma=3
-
-The rx_trigger= and tx_trigger= options can be used to set the FIFO trigger
-levels.  They specify when the ESP card should send an interrupt.  Larger
-values will decrease the number of interrupts; however, a value too high may
-result in data loss.  Valid values are 1 through 1023, with 768 being the
-default.  For example, to set the receive trigger level to 512 bytes and the
-transmit trigger level to 700 bytes, the insmod command would be:
-
-insmod esp rx_trigger=512 tx_trigger=700
-
-The flow_off= and flow_on= options can be used to set the hardware flow off/
-flow on levels.  The flow on level must be lower than the flow off level, and
-the flow off level should be higher than rx_trigger.  Valid values are 1
-through 1023, with 1016 being the default flow off level and 944 being the
-default flow on level.  For example, to set the flow off level to 1000 bytes
-and the flow on level to 935 bytes, the insmod command would be:
-
-insmod esp flow_off=1000 flow_on=935
-
-The rx_timeout= option can be used to set the receive timeout value.  This
-value indicates how long after receiving the last character that the ESP card
-should wait before signalling an interrupt.  Valid values are 0 though 255,
-with 128 being the default.  A value too high will increase latency, and a
-value too low will cause unnecessary interrupts.  For example, to set the
-receive timeout to 255, the insmod command would be:
-
-insmod esp rx_timeout=255
-
-The pio_threshold= option sets the threshold (in number of characters) for
-using PIO mode instead of DMA mode.  For example, if this value is 32,
-transfers of 32 bytes or less will always use PIO mode.
-
-insmod esp pio_threshold=32
-
-Multiple options can be listed on the insmod command line by separating each
-option with a space.  For example:
-
-insmod esp dma=3 trigger=512
-
-The esp module can be automatically loaded when needed.  To cause this to
-happen, add the following lines to /etc/modprobe.conf (replacing the last line
-with options for your configuration):
-
-alias char-major-57 esp
-alias char-major-58 esp
-options esp irq=0,0,0,0,0,0,3,0 divisor=0,0,0,0,0,0,0x4,0
-
-You may also need to run 'depmod -a'.
-
-Devices must be created manually.  To create the devices, note the output from
-the module after it is inserted.  The output will appear in the location where
-kernel messages usually appear (usually /var/adm/messages).  Create two devices
-for each 'tty' mentioned, one with major of 57 and the other with major of 58.
-The minor number should be the same as the tty number reported.  The commands
-would be (replace ? with the tty number):
-
-mknod /dev/ttyP? c 57 ?
-mknod /dev/cup? c 58 ?
-
-For example, if the following line appears:
-
-Oct 24 18:17:23 techno kernel: ttyP8 at 0x0140 (irq = 3) is an ESP primary port
-
-...two devices should be created:
-
-mknod /dev/ttyP8 c 57 8
-mknod /dev/cup8 c 58 8
-
-You may need to set the permissions on the devices:
-
-chmod 666 /dev/ttyP*
-chmod 666 /dev/cup*
-
-The ESP module and the serial module should not conflict (they can be used at
-the same time).  After the ESP module has been loaded the ports on the ESP card
-will no longer be accessible by the serial driver.
-
-If I/O errors are experienced when accessing the port, check for IRQ and DMA
-conflicts ('cat /proc/interrupts' and 'cat /proc/dma' for a list of IRQs and
-DMAs currently in use).
-
-Enjoy!
-Andrew J. Robinson <arobinso@nyx.net>
diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt
index 8e65c44..5e5349a 100644
--- a/Documentation/serial/tty.txt
+++ b/Documentation/serial/tty.txt
@@ -42,7 +42,8 @@ TTY side interfaces:
 open()		-	Called when the line discipline is attached to
 			the terminal. No other call into the line
 			discipline for this tty will occur until it
-			completes successfully. Can sleep.
+			completes successfully. Returning an error will
+			prevent the ldisc from being attached. Can sleep.
 
 close()		-	This is called on a terminal when the line
 			discipline is being unplugged. At the point of
@@ -52,7 +53,7 @@ close()		-	This is called on a terminal when the line
 hangup()	-	Called when the tty line is hung up.
 			The line discipline should cease I/O to the tty.
 			No further calls into the ldisc code will occur.
-			Can sleep.
+			The return value is ignored. Can sleep.
 
 write()		-	A process is writing data through the line
 			discipline.  Multiple write calls are serialized
@@ -83,6 +84,10 @@ ioctl()		-	Called when an ioctl is handed to the tty layer
 			that might be for the ldisc. Multiple ioctl calls
 			may occur in parallel. May sleep. 
 
+compat_ioctl()	-	Called when a 32 bit ioctl is handed to the tty layer
+			that might be for the ldisc. Multiple ioctl calls
+			may occur in parallel. May sleep.
+
 Driver Side Interfaces:
 
 receive_buf()	-	Hand buffers of bytes from the driver to the ldisc
diff --git a/Documentation/spinlocks.txt b/Documentation/spinlocks.txt
index 619699d..178c831 100644
--- a/Documentation/spinlocks.txt
+++ b/Documentation/spinlocks.txt
@@ -1,73 +1,8 @@
-SPIN_LOCK_UNLOCKED and RW_LOCK_UNLOCKED defeat lockdep state tracking and
-are hence deprecated.
+Lesson 1: Spin locks
 
-Please use DEFINE_SPINLOCK()/DEFINE_RWLOCK() or
-__SPIN_LOCK_UNLOCKED()/__RW_LOCK_UNLOCKED() as appropriate for static
-initialization.
-
-Most of the time, you can simply turn:
-
-	static spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
-
-into:
-
-	static DEFINE_SPINLOCK(xxx_lock);
-
-Static structure member variables go from:
-
-	struct foo bar {
-		.lock	=	SPIN_LOCK_UNLOCKED;
-	};
-
-to:
-
-	struct foo bar {
-		.lock	=	__SPIN_LOCK_UNLOCKED(bar.lock);
-	};
-
-Declaration of static rw_locks undergo a similar transformation.
-
-Dynamic initialization, when necessary, may be performed as
-demonstrated below.
-
-   spinlock_t xxx_lock;
-   rwlock_t xxx_rw_lock;
-
-   static int __init xxx_init(void)
-   {
-   	spin_lock_init(&xxx_lock);
-	rwlock_init(&xxx_rw_lock);
-	...
-   }
-
-   module_init(xxx_init);
-
-The following discussion is still valid, however, with the dynamic
-initialization of spinlocks or with DEFINE_SPINLOCK, etc., used
-instead of SPIN_LOCK_UNLOCKED.
-
------------------------
-
-On Fri, 2 Jan 1998, Doug Ledford wrote:
-> 
-> I'm working on making the aic7xxx driver more SMP friendly (as well as
-> importing the latest FreeBSD sequencer code to have 7895 support) and wanted
-> to get some info from you.  The goal here is to make the various routines
-> SMP safe as well as UP safe during interrupts and other manipulating
-> routines.  So far, I've added a spin_lock variable to things like my queue
-> structs.  Now, from what I recall, there are some spin lock functions I can
-> use to lock these spin locks from other use as opposed to a (nasty)
-> save_flags(); cli(); stuff; restore_flags(); construct.  Where do I find
-> these routines and go about making use of them?  Do they only lock on a
-> per-processor basis or can they also lock say an interrupt routine from
-> mucking with a queue if the queue routine was manipulating it when the
-> interrupt occurred, or should I still use a cli(); based construct on that
-> one?
-
-See <asm/spinlock.h>. The basic version is:
-
-   spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
+The most basic primitive for locking is spinlock.
 
+static DEFINE_SPINLOCK(xxx_lock);
 
 	unsigned long flags;
 
@@ -75,13 +10,11 @@ See <asm/spinlock.h>. The basic version is:
 	... critical section here ..
 	spin_unlock_irqrestore(&xxx_lock, flags);
 
-and the above is always safe. It will disable interrupts _locally_, but the
+The above is always safe. It will disable interrupts _locally_, but the
 spinlock itself will guarantee the global lock, so it will guarantee that
 there is only one thread-of-control within the region(s) protected by that
-lock. 
-
-Note that it works well even under UP - the above sequence under UP
-essentially is just the same as doing a
+lock. This works well even under UP. The above sequence under UP
+essentially is just the same as doing
 
 	unsigned long flags;
 
@@ -91,15 +24,13 @@ essentially is just the same as doing a
 
 so the code does _not_ need to worry about UP vs SMP issues: the spinlocks
 work correctly under both (and spinlocks are actually more efficient on
-architectures that allow doing the "save_flags + cli" in one go because I
-don't export that interface normally).
+architectures that allow doing the "save_flags + cli" in one operation).
+
+   NOTE! Implications of spin_locks for memory are further described in:
 
-NOTE NOTE NOTE! The reason the spinlock is so much faster than a global
-interrupt lock under SMP is exactly because it disables interrupts only on
-the local CPU. The spin-lock is safe only when you _also_ use the lock
-itself to do locking across CPU's, which implies that EVERYTHING that
-touches a shared variable has to agree about the spinlock they want to
-use.
+     Documentation/memory-barriers.txt
+       (5) LOCK operations.
+       (6) UNLOCK operations.
 
 The above is usually pretty simple (you usually need and want only one
 spinlock for most things - using more than one spinlock can make things a
@@ -120,20 +51,24 @@ and another sequence that does
 then they are NOT mutually exclusive, and the critical regions can happen
 at the same time on two different CPU's. That's fine per se, but the
 critical regions had better be critical for different things (ie they
-can't stomp on each other). 
+can't stomp on each other).
 
 The above is a problem mainly if you end up mixing code - for example the
 routines in ll_rw_block() tend to use cli/sti to protect the atomicity of
 their actions, and if a driver uses spinlocks instead then you should
-think about issues like the above..
+think about issues like the above.
 
 This is really the only really hard part about spinlocks: once you start
 using spinlocks they tend to expand to areas you might not have noticed
 before, because you have to make sure the spinlocks correctly protect the
 shared data structures _everywhere_ they are used. The spinlocks are most
-easily added to places that are completely independent of other code (ie
-internal driver data structures that nobody else ever touches, for
-example). 
+easily added to places that are completely independent of other code (for
+example, internal driver data structures that nobody else ever touches).
+
+   NOTE! The spin-lock is safe only when you _also_ use the lock itself
+   to do locking across CPU's, which implies that EVERYTHING that
+   touches a shared variable has to agree about the spinlock they want
+   to use.
 
 ----
 
@@ -141,13 +76,17 @@ Lesson 2: reader-writer spinlocks.
 
 If your data accesses have a very natural pattern where you usually tend
 to mostly read from the shared variables, the reader-writer locks
-(rw_lock) versions of the spinlocks are often nicer. They allow multiple
+(rw_lock) versions of the spinlocks are sometimes useful. They allow multiple
 readers to be in the same critical region at once, but if somebody wants
-to change the variables it has to get an exclusive write lock. The
-routines look the same as above:
+to change the variables it has to get an exclusive write lock.
 
-   rwlock_t xxx_lock = RW_LOCK_UNLOCKED;
+   NOTE! reader-writer locks require more atomic memory operations than
+   simple spinlocks.  Unless the reader critical section is long, you
+   are better off just using spinlocks.
 
+The routines look the same as above:
+
+   rwlock_t xxx_lock = RW_LOCK_UNLOCKED;
 
 	unsigned long flags;
 
@@ -159,18 +98,21 @@ routines look the same as above:
 	.. read and write exclusive access to the info ...
 	write_unlock_irqrestore(&xxx_lock, flags);
 
-The above kind of lock is useful for complex data structures like linked
-lists etc, especially when you know that most of the work is to just
-traverse the list searching for entries without changing the list itself,
-for example. Then you can use the read lock for that kind of list
-traversal, which allows many concurrent readers. Anything that _changes_
-the list will have to get the write lock. 
+The above kind of lock may be useful for complex data structures like
+linked lists, especially searching for entries without changing the list
+itself.  The read lock allows many concurrent readers.  Anything that
+_changes_ the list will have to get the write lock.
+
+   NOTE! RCU is better for list traversal, but requires careful
+   attention to design detail (see Documentation/RCU/listRCU.txt).
 
-Note: you cannot "upgrade" a read-lock to a write-lock, so if you at _any_
+Also, you cannot "upgrade" a read-lock to a write-lock, so if you at _any_
 time need to do any changes (even if you don't do it every time), you have
-to get the write-lock at the very beginning. I could fairly easily add a
-primitive to create a "upgradeable" read-lock, but it hasn't been an issue
-yet. Tell me if you'd want one. 
+to get the write-lock at the very beginning.
+
+   NOTE! We are working hard to remove reader-writer spinlocks in most
+   cases, so please don't add a new one without consensus.  (Instead, see
+   Documentation/RCU/rcu.txt for complete information.)
 
 ----
 
@@ -233,4 +175,46 @@ indeed), while write-locks need to protect themselves against interrupts.
 
 		Linus
 
+----
+
+Reference information:
+
+For dynamic initialization, use spin_lock_init() or rwlock_init() as
+appropriate:
+
+   spinlock_t xxx_lock;
+   rwlock_t xxx_rw_lock;
+
+   static int __init xxx_init(void)
+   {
+	spin_lock_init(&xxx_lock);
+	rwlock_init(&xxx_rw_lock);
+	...
+   }
+
+   module_init(xxx_init);
+
+For static initialization, use DEFINE_SPINLOCK() / DEFINE_RWLOCK() or
+__SPIN_LOCK_UNLOCKED() / __RW_LOCK_UNLOCKED() as appropriate.
+
+SPIN_LOCK_UNLOCKED and RW_LOCK_UNLOCKED are deprecated.  These interfere
+with lockdep state tracking.
+
+Most of the time, you can simply turn:
+	static spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
+into:
+	static DEFINE_SPINLOCK(xxx_lock);
+
+Static structure member variables go from:
+
+	struct foo bar {
+		.lock	=	SPIN_LOCK_UNLOCKED;
+	};
+
+to:
 
+	struct foo bar {
+		.lock	=	__SPIN_LOCK_UNLOCKED(bar.lock);
+	};
+
+Declaration of static rw_locks undergo a similar transformation.
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 8f7a0e7..3894eaa 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -19,6 +19,8 @@ Currently, these files might (depending on your configuration)
 show up in /proc/sys/kernel:
 - acpi_video_flags
 - acct
+- bootloader_type	     [ X86 only ]
+- bootloader_version	     [ X86 only ]
 - callhome		     [ S390 only ]
 - auto_msgmni
 - core_pattern
@@ -93,6 +95,35 @@ valid for 30 seconds.
 
 ==============================================================
 
+bootloader_type:
+
+x86 bootloader identification
+
+This gives the bootloader type number as indicated by the bootloader,
+shifted left by 4, and OR'd with the low four bits of the bootloader
+version.  The reason for this encoding is that this used to match the
+type_of_loader field in the kernel header; the encoding is kept for
+backwards compatibility.  That is, if the full bootloader type number
+is 0x15 and the full version number is 0x234, this file will contain
+the value 340 = 0x154.
+
+See the type_of_loader and ext_loader_type fields in
+Documentation/x86/boot.txt for additional information.
+
+==============================================================
+
+bootloader_version:
+
+x86 bootloader version
+
+The complete bootloader version number.  In the example above, this
+file will contain the value 564 = 0x234.
+
+See the type_of_loader and ext_loader_ver fields in
+Documentation/x86/boot.txt for additional information.
+
+==============================================================
+
 callhome:
 
 Controls the kernel's callhome behavior in case of a kernel panic.
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index a87dc27..cb3d15b 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -206,6 +206,7 @@ passive
 	passive trip point for the zone. Activation is done by polling with
 	an interval of 1 second.
 	Unit: millidegrees Celsius
+	Valid values: 0 (disabled) or greater than 1000
 	RW, Optional
 
 *****************************
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index ad64261..c7c1dc2 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -2,7 +2,7 @@
 
 		 Alan Stern <stern@rowland.harvard.edu>
 
-			    October 5, 2007
+			    November 10, 2009
 
 
 
@@ -123,9 +123,9 @@ relevant attribute files are: wakeup, level, and autosuspend.
 
 	power/level
 
-		This file contains one of three words: "on", "auto",
-		or "suspend".  You can write those words to the file
-		to change the device's setting.
+		This file contains one of two words: "on" or "auto".
+		You can write those words to the file to change the
+		device's setting.
 
 		"on" means that the device should be resumed and
 		autosuspend is not allowed.  (Of course, system
@@ -134,10 +134,10 @@ relevant attribute files are: wakeup, level, and autosuspend.
 		"auto" is the normal state in which the kernel is
 		allowed to autosuspend and autoresume the device.
 
-		"suspend" means that the device should remain
-		suspended, and autoresume is not allowed.  (But remote
-		wakeup may still be allowed, since it is controlled
-		separately by the power/wakeup attribute.)
+		(In kernels up to 2.6.32, you could also specify
+		"suspend", meaning that the device should remain
+		suspended and autoresume was not allowed.  This
+		setting is no longer supported.)
 
 	power/autosuspend
 
@@ -313,13 +313,14 @@ three of the methods listed above.  In addition, a driver indicates
 that it supports autosuspend by setting the .supports_autosuspend flag
 in its usb_driver structure.  It is then responsible for informing the
 USB core whenever one of its interfaces becomes busy or idle.  The
-driver does so by calling these five functions:
+driver does so by calling these six functions:
 
 	int  usb_autopm_get_interface(struct usb_interface *intf);
 	void usb_autopm_put_interface(struct usb_interface *intf);
-	int  usb_autopm_set_interface(struct usb_interface *intf);
 	int  usb_autopm_get_interface_async(struct usb_interface *intf);
 	void usb_autopm_put_interface_async(struct usb_interface *intf);
+	void usb_autopm_get_interface_no_resume(struct usb_interface *intf);
+	void usb_autopm_put_interface_no_suspend(struct usb_interface *intf);
 
 The functions work by maintaining a counter in the usb_interface
 structure.  When intf->pm_usage_count is > 0 then the interface is
@@ -331,11 +332,13 @@ considered to be idle, and the kernel may autosuspend the device.
 associated with the device itself rather than any of its interfaces.
 This field is used only by the USB core.)
 
-The driver owns intf->pm_usage_count; it can modify the value however
-and whenever it likes.  A nice aspect of the non-async usb_autopm_*
-routines is that the changes they make are protected by the usb_device
-structure's PM mutex (udev->pm_mutex); however drivers may change
-pm_usage_count without holding the mutex.  Drivers using the async
+Drivers must not modify intf->pm_usage_count directly; its value
+should be changed only be using the functions listed above.  Drivers
+are responsible for insuring that the overall change to pm_usage_count
+during their lifetime balances out to 0 (it may be necessary for the
+disconnect method to call usb_autopm_put_interface() one or more times
+to fulfill this requirement).  The first two routines use the PM mutex
+in struct usb_device for mutual exclusion; drivers using the async
 routines are responsible for their own synchronization and mutual
 exclusion.
 
@@ -347,11 +350,6 @@ exclusion.
 	attempts an autosuspend if the new value is <= 0 and the
 	device isn't suspended.
 
-	usb_autopm_set_interface() leaves pm_usage_count alone.
-	It attempts an autoresume if the value is > 0 and the device
-	is suspended, and it attempts an autosuspend if the value is
-	<= 0 and the device isn't suspended.
-
 	usb_autopm_get_interface_async() and
 	usb_autopm_put_interface_async() do almost the same things as
 	their non-async counterparts.  The differences are: they do
@@ -360,13 +358,11 @@ exclusion.
 	such as an URB's completion handler, but when they return the
 	device will not generally not yet be in the desired state.
 
-There also are a couple of utility routines drivers can use:
-
-	usb_autopm_enable() sets pm_usage_cnt to 0 and then calls
-	usb_autopm_set_interface(), which will attempt an autosuspend.
-
-	usb_autopm_disable() sets pm_usage_cnt to 1 and then calls
-	usb_autopm_set_interface(), which will attempt an autoresume.
+	usb_autopm_get_interface_no_resume() and
+	usb_autopm_put_interface_no_suspend() merely increment or
+	decrement the pm_usage_count value; they do not attempt to
+	carry out an autoresume or an autosuspend.  Hence they can be
+	called in an atomic context.
 
 The conventional usage pattern is that a driver calls
 usb_autopm_get_interface() in its open routine and
@@ -400,11 +396,11 @@ though, setting this flag won't cause the kernel to autoresume it.
 Normally a driver would set this flag in its probe method, at which
 time the device is guaranteed not to be autosuspended.)
 
-The usb_autopm_* routines have to run in a sleepable process context;
-they must not be called from an interrupt handler or while holding a
-spinlock.  In fact, the entire autosuspend mechanism is not well geared
-toward interrupt-driven operation.  However there is one thing a
-driver can do in an interrupt handler:
+The synchronous usb_autopm_* routines have to run in a sleepable
+process context; they must not be called from an interrupt handler or
+while holding a spinlock.  In fact, the entire autosuspend mechanism
+is not well geared toward interrupt-driven operation.  However there
+is one thing a driver can do in an interrupt handler:
 
 	usb_mark_last_busy(struct usb_device *udev);
 
@@ -423,15 +419,16 @@ an URB had completed too recently.
 
 External suspend calls should never be allowed to fail in this way,
 only autosuspend calls.  The driver can tell them apart by checking
-udev->auto_pm; this flag will be set to 1 for internal PM events
-(autosuspend or autoresume) and 0 for external PM events.
+the PM_EVENT_AUTO bit in the message.event argument to the suspend
+method; this bit will be set for internal PM events (autosuspend) and
+clear for external PM events.
 
 Many of the ingredients in the autosuspend framework are oriented
 towards interfaces: The usb_interface structure contains the
 pm_usage_cnt field, and the usb_autopm_* routines take an interface
 pointer as their argument.  But somewhat confusingly, a few of the
-pieces (usb_mark_last_busy() and udev->auto_pm) use the usb_device
-structure instead.  Drivers need to keep this straight; they can call
+pieces (i.e., usb_mark_last_busy()) use the usb_device structure
+instead.  Drivers need to keep this straight; they can call
 interface_to_usbdev() to find the device structure for a given
 interface.
 
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 319d983..1800a62 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -12,6 +12,7 @@ m5602		0402:5602	ALi Video Camera Controller
 spca501		040a:0002	Kodak DVC-325
 spca500		040a:0300	Kodak EZ200
 zc3xx		041e:041e	Creative WebCam Live!
+ov519		041e:4003	Video Blaster WebCam Go Plus
 spca500		041e:400a	Creative PC-CAM 300
 sunplus		041e:400b	Creative PC-CAM 600
 sunplus		041e:4012	PC-Cam350
@@ -168,10 +169,14 @@ sunplus		055f:c650	Mustek MDC5500Z
 zc3xx		055f:d003	Mustek WCam300A
 zc3xx		055f:d004	Mustek WCam300 AN
 conex		0572:0041	Creative Notebook cx11646
+ov519		05a9:0511	Video Blaster WebCam 3/WebCam Plus, D-Link USB Digital Video Camera
+ov519		05a9:0518	Creative WebCam
 ov519		05a9:0519	OV519 Microphone
 ov519		05a9:0530	OmniVision
+ov519		05a9:2800	OmniVision SuperCAM
 ov519		05a9:4519	Webcam Classic
 ov519		05a9:8519	OmniVision
+ov519		05a9:a511	D-Link USB Digital Video Camera
 ov519		05a9:a518	D-Link DSB-C310 Webcam
 sunplus		05da:1018	Digital Dream Enigma 1.3
 stk014		05e1:0893	Syntek DV4000
@@ -187,7 +192,7 @@ ov534		06f8:3002	Hercules Blog Webcam
 ov534		06f8:3003	Hercules Dualpix HD Weblog
 sonixj		06f8:3004	Hercules Classic Silver
 sonixj		06f8:3008	Hercules Deluxe Optical Glass
-pac7311		06f8:3009	Hercules Classic Link
+pac7302		06f8:3009	Hercules Classic Link
 spca508		0733:0110	ViewQuest VQ110
 spca501		0733:0401	Intel Create and Share
 spca501		0733:0402	ViewQuest M318B
@@ -199,6 +204,7 @@ sunplus		0733:2221	Mercury Digital Pro 3.1p
 sunplus		0733:3261	Concord 3045 spca536a
 sunplus		0733:3281	Cyberpix S550V
 spca506		0734:043b	3DeMon USB Capture aka
+ov519		0813:0002	Dual Mode USB Camera Plus
 spca500		084d:0003	D-Link DSC-350
 spca500		08ca:0103	Aiptek PocketDV
 sunplus		08ca:0104	Aiptek PocketDVII 1.3
@@ -236,15 +242,15 @@ pac7311		093a:2603	Philips SPC 500 NC
 pac7311		093a:2608	Trust WB-3300p
 pac7311		093a:260e	Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
 pac7311		093a:260f	SnakeCam
-pac7311		093a:2620	Apollo AC-905
-pac7311		093a:2621	PAC731x
-pac7311		093a:2622	Genius Eye 312
-pac7311		093a:2624	PAC7302
-pac7311		093a:2626	Labtec 2200
-pac7311		093a:2628	Genius iLook 300
-pac7311		093a:2629	Genious iSlim 300
-pac7311		093a:262a	Webcam 300k
-pac7311		093a:262c	Philips SPC 230 NC
+pac7302		093a:2620	Apollo AC-905
+pac7302		093a:2621	PAC731x
+pac7302		093a:2622	Genius Eye 312
+pac7302		093a:2624	PAC7302
+pac7302		093a:2626	Labtec 2200
+pac7302		093a:2628	Genius iLook 300
+pac7302		093a:2629	Genious iSlim 300
+pac7302		093a:262a	Webcam 300k
+pac7302		093a:262c	Philips SPC 230 NC
 jeilinj		0979:0280	Sakar 57379
 zc3xx		0ac8:0302	Z-star Vimicro zc0302
 vc032x		0ac8:0321	Vimicro generic vc0321
@@ -259,6 +265,7 @@ vc032x		0ac8:c002	Sony embedded vimicro
 vc032x		0ac8:c301	Samsung Q1 Ultra Premium
 spca508		0af9:0010	Hama USB Sightcam 100
 spca508		0af9:0011	Hama USB Sightcam 100
+ov519		0b62:0059	iBOT2 Webcam
 sonixb		0c45:6001	Genius VideoCAM NB
 sonixb		0c45:6005	Microdia Sweex Mini Webcam
 sonixb		0c45:6007	Sonix sn9c101 + Tas5110D
@@ -318,8 +325,10 @@ sn9c20x		0c45:62b3	PC Camera (SN9C202 + OV9655)
 sn9c20x		0c45:62bb	PC Camera (SN9C202 + OV7660)
 sn9c20x		0c45:62bc	PC Camera (SN9C202 + HV7131R)
 sunplus		0d64:0303	Sunplus FashionCam DXG
+ov519		0e96:c001	TRUST 380 USB2 SPACEC@M
 etoms		102c:6151	Qcam Sangha CIF
 etoms		102c:6251	Qcam xxxxxx VGA
+ov519		1046:9967	W9967CF/W9968CF WebCam IC, Video Blaster WebCam Go
 zc3xx		10fd:0128	Typhoon Webshot II USB 300k 0x0128
 spca561		10fd:7e50	FlyCam Usb 100
 zc3xx		10fd:8050	Typhoon Webshot II USB 300k
@@ -332,7 +341,12 @@ spca501		1776:501c	Arowana 300K CMOS Camera
 t613		17a1:0128	TASCORP JPEG Webcam, NGS Cyclops
 vc032x		17ef:4802	Lenovo Vc0323+MI1310_SOC
 pac207		2001:f115	D-Link DSB-C120
+sq905c		2770:9050	sq905c
+sq905c		2770:905c	DualCamera
+sq905		2770:9120	Argus Digital Camera DC1512
+sq905c		2770:913d	sq905c
 spca500		2899:012c	Toptro Industrial
+ov519		8020:ef04	ov519
 spca508		8086:0110	Intel Easy PC Camera
 spca500		8086:0630	Intel Pocket PC Camera
 spca506		99fa:8988	Grandtec V.cap
diff --git a/Documentation/video4linux/sh_mobile_ceu_camera.txt b/Documentation/video4linux/sh_mobile_ceu_camera.txt
new file mode 100644
index 0000000..2ae1634
--- /dev/null
+++ b/Documentation/video4linux/sh_mobile_ceu_camera.txt
@@ -0,0 +1,157 @@
+	Cropping and Scaling algorithm, used in the sh_mobile_ceu_camera driver
+	=======================================================================
+
+Terminology
+-----------
+
+sensor scales: horizontal and vertical scales, configured by the sensor driver
+host scales: -"- host driver
+combined scales: sensor_scale * host_scale
+
+
+Generic scaling / cropping scheme
+---------------------------------
+
+-1--
+|
+-2-- -\
+|      --\
+|         --\
++-5-- -\     -- -3--
+|       ---\
+|           --- -4-- -\
+|                      -\
+|                        - -6--
+|
+|                        - -6'-
+|                      -/
+|           --- -4'- -/
+|       ---/
++-5'- -/
+|            -- -3'-
+|         --/
+|      --/
+-2'- -/
+|
+|
+-1'-
+
+Produced by user requests:
+
+S_CROP(left / top = (5) - (1), width / height = (5') - (5))
+S_FMT(width / height = (6') - (6))
+
+Here:
+
+(1) to (1') - whole max width or height
+(1) to (2)  - sensor cropped left or top
+(2) to (2') - sensor cropped width or height
+(3) to (3') - sensor scale
+(3) to (4)  - CEU cropped left or top
+(4) to (4') - CEU cropped width or height
+(5) to (5') - reverse sensor scale applied to CEU cropped width or height
+(2) to (5)  - reverse sensor scale applied to CEU cropped left or top
+(6) to (6') - CEU scale - user window
+
+
+S_FMT
+-----
+
+Do not touch input rectangle - it is already optimal.
+
+1. Calculate current sensor scales:
+
+	scale_s = ((3') - (3)) / ((2') - (2))
+
+2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at
+current sensor scales onto input window - this is user S_CROP:
+
+	width_u = (5') - (5) = ((4') - (4)) * scale_s
+
+3. Calculate new combined scales from "effective" input window to requested user
+window:
+
+	scale_comb = width_u / ((6') - (6))
+
+4. Calculate sensor output window by applying combined scales to real input
+window:
+
+	width_s_out = ((2') - (2)) / scale_comb
+
+5. Apply iterative sensor S_FMT for sensor output window.
+
+	subdev->video_ops->s_fmt(.width = width_s_out)
+
+6. Retrieve sensor output window (g_fmt)
+
+7. Calculate new sensor scales:
+
+	scale_s_new = ((3')_new - (3)_new) / ((2') - (2))
+
+8. Calculate new CEU crop - apply sensor scales to previously calculated
+"effective" crop:
+
+	width_ceu = (4')_new - (4)_new = width_u / scale_s_new
+	left_ceu = (4)_new - (3)_new = ((5) - (2)) / scale_s_new
+
+9. Use CEU cropping to crop to the new window:
+
+	ceu_crop(.width = width_ceu, .left = left_ceu)
+
+10. Use CEU scaling to scale to the requested user window:
+
+	scale_ceu = width_ceu / width
+
+
+S_CROP
+------
+
+If old scale applied to new crop is invalid produce nearest new scale possible
+
+1. Calculate current combined scales.
+
+	scale_comb = (((4') - (4)) / ((6') - (6))) * (((2') - (2)) / ((3') - (3)))
+
+2. Apply iterative sensor S_CROP for new input window.
+
+3. If old combined scales applied to new crop produce an impossible user window,
+adjust scales to produce nearest possible window.
+
+	width_u_out = ((5') - (5)) / scale_comb
+
+	if (width_u_out > max)
+		scale_comb = ((5') - (5)) / max;
+	else if (width_u_out < min)
+		scale_comb = ((5') - (5)) / min;
+
+4. Issue G_CROP to retrieve actual input window.
+
+5. Using actual input window and calculated combined scales calculate sensor
+target output window.
+
+	width_s_out = ((3') - (3)) = ((2') - (2)) / scale_comb
+
+6. Apply iterative S_FMT for new sensor target output window.
+
+7. Issue G_FMT to retrieve the actual sensor output window.
+
+8. Calculate sensor scales.
+
+	scale_s = ((3') - (3)) / ((2') - (2))
+
+9. Calculate sensor output subwindow to be cropped on CEU by applying sensor
+scales to the requested window.
+
+	width_ceu = ((5') - (5)) / scale_s
+
+10. Use CEU cropping for above calculated window.
+
+11. Calculate CEU scales from sensor scales from results of (10) and user window
+from (3)
+
+	scale_ceu = calc_scale(((5') - (5)), &width_u_out)
+
+12. Apply CEU scales.
+
+--
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index b806eda..74d677c 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -561,6 +561,8 @@ video_device helper functions
 
 There are a few useful helper functions:
 
+- file/video_device private data
+
 You can set/get driver private data in the video_device struct using:
 
 void *video_get_drvdata(struct video_device *vdev);
@@ -575,8 +577,7 @@ struct video_device *video_devdata(struct file *file);
 
 returns the video_device belonging to the file struct.
 
-The final helper function combines video_get_drvdata with
-video_devdata:
+The video_drvdata function combines video_get_drvdata with video_devdata:
 
 void *video_drvdata(struct file *file);
 
@@ -584,6 +585,17 @@ You can go from a video_device struct to the v4l2_device struct using:
 
 struct v4l2_device *v4l2_dev = vdev->v4l2_dev;
 
+- Device node name
+
+The video_device node kernel name can be retrieved using
+
+const char *video_device_node_name(struct video_device *vdev);
+
+The name is used as a hint by userspace tools such as udev. The function
+should be used where possible instead of accessing the video_device::num and
+video_device::minor fields.
+
+
 video buffer helper functions
 -----------------------------
 
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index 82a7bd1..bc31636 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -11,23 +11,21 @@ This optimization is more critical now as bigger and bigger physical memories
 (several GBs) are more readily available.
 
 Users can use the huge page support in Linux kernel by either using the mmap
-system call or standard SYSv shared memory system calls (shmget, shmat).
+system call or standard SYSV shared memory system calls (shmget, shmat).
 
 First the Linux kernel needs to be built with the CONFIG_HUGETLBFS
 (present under "File systems") and CONFIG_HUGETLB_PAGE (selected
 automatically when CONFIG_HUGETLBFS is selected) configuration
 options.
 
-The kernel built with huge page support should show the number of configured
-huge pages in the system by running the "cat /proc/meminfo" command.
+The /proc/meminfo file provides information about the total number of
+persistent hugetlb pages in the kernel's huge page pool.  It also displays
+information about the number of free, reserved and surplus huge pages and the
+default huge page size.  The huge page size is needed for generating the
+proper alignment and size of the arguments to system calls that map huge page
+regions.
 
-/proc/meminfo also provides information about the total number of hugetlb
-pages configured in the kernel.  It also displays information about the
-number of free hugetlb pages at any time.  It also displays information about
-the configured huge page size - this is needed for generating the proper
-alignment and size of the arguments to the above system calls.
-
-The output of "cat /proc/meminfo" will have lines like:
+The output of "cat /proc/meminfo" will include lines like:
 
 .....
 HugePages_Total: vvv
@@ -53,59 +51,63 @@ HugePages_Surp  is short for "surplus," and is the number of huge pages in
 /proc/filesystems should also show a filesystem of type "hugetlbfs" configured
 in the kernel.
 
-/proc/sys/vm/nr_hugepages indicates the current number of configured hugetlb
-pages in the kernel.  Super user can dynamically request more (or free some
-pre-configured) huge pages.
-The allocation (or deallocation) of hugetlb pages is possible only if there are
-enough physically contiguous free pages in system (freeing of huge pages is
-possible only if there are enough hugetlb pages free that can be transferred
-back to regular memory pool).
+/proc/sys/vm/nr_hugepages indicates the current number of "persistent" huge
+pages in the kernel's huge page pool.  "Persistent" huge pages will be
+returned to the huge page pool when freed by a task.  A user with root
+privileges can dynamically allocate more or free some persistent huge pages
+by increasing or decreasing the value of 'nr_hugepages'.
 
-Pages that are used as hugetlb pages are reserved inside the kernel and cannot
-be used for other purposes.
+Pages that are used as huge pages are reserved inside the kernel and cannot
+be used for other purposes.  Huge pages cannot be swapped out under
+memory pressure.
 
-Once the kernel with Hugetlb page support is built and running, a user can
-use either the mmap system call or shared memory system calls to start using
-the huge pages.  It is required that the system administrator preallocate
-enough memory for huge page purposes.
+Once a number of huge pages have been pre-allocated to the kernel huge page
+pool, a user with appropriate privilege can use either the mmap system call
+or shared memory system calls to use the huge pages.  See the discussion of
+Using Huge Pages, below.
 
-The administrator can preallocate huge pages on the kernel boot command line by
-specifying the "hugepages=N" parameter, where 'N' = the number of huge pages
-requested.  This is the most reliable method for preallocating huge pages as
-memory has not yet become fragmented.
+The administrator can allocate persistent huge pages on the kernel boot
+command line by specifying the "hugepages=N" parameter, where 'N' = the
+number of huge pages requested.  This is the most reliable method of
+allocating huge pages as memory has not yet become fragmented.
 
-Some platforms support multiple huge page sizes.  To preallocate huge pages
+Some platforms support multiple huge page sizes.  To allocate huge pages
 of a specific size, one must preceed the huge pages boot command parameters
 with a huge page size selection parameter "hugepagesz=<size>".  <size> must
 be specified in bytes with optional scale suffix [kKmMgG].  The default huge
 page size may be selected with the "default_hugepagesz=<size>" boot parameter.
 
-/proc/sys/vm/nr_hugepages indicates the current number of configured [default
-size] hugetlb pages in the kernel.  Super user can dynamically request more
-(or free some pre-configured) huge pages.
-
-Use the following command to dynamically allocate/deallocate default sized
-huge pages:
+When multiple huge page sizes are supported, /proc/sys/vm/nr_hugepages
+indicates the current number of pre-allocated huge pages of the default size.
+Thus, one can use the following command to dynamically allocate/deallocate
+default sized persistent huge pages:
 
 	echo 20 > /proc/sys/vm/nr_hugepages
 
-This command will try to configure 20 default sized huge pages in the system.
+This command will try to adjust the number of default sized huge pages in the
+huge page pool to 20, allocating or freeing huge pages, as required.
+
 On a NUMA platform, the kernel will attempt to distribute the huge page pool
-over the all on-line nodes.  These huge pages, allocated when nr_hugepages
-is increased, are called "persistent huge pages".
+over all the set of allowed nodes specified by the NUMA memory policy of the
+task that modifies nr_hugepages.  The default for the allowed nodes--when the
+task has default memory policy--is all on-line nodes with memory.  Allowed
+nodes with insufficient available, contiguous memory for a huge page will be
+silently skipped when allocating persistent huge pages.  See the discussion
+below of the interaction of task memory policy, cpusets and per node attributes
+with the allocation and freeing of persistent huge pages.
 
 The success or failure of huge page allocation depends on the amount of
-physically contiguous memory that is preset in system at the time of the
+physically contiguous memory that is present in system at the time of the
 allocation attempt.  If the kernel is unable to allocate huge pages from
 some nodes in a NUMA system, it will attempt to make up the difference by
 allocating extra pages on other nodes with sufficient available contiguous
 memory, if any.
 
-System administrators may want to put this command in one of the local rc init
-files.  This will enable the kernel to request huge pages early in the boot
-process when the possibility of getting physical contiguous pages is still
-very high.  Administrators can verify the number of huge pages actually
-allocated by checking the sysctl or meminfo.  To check the per node
+System administrators may want to put this command in one of the local rc
+init files.  This will enable the kernel to allocate huge pages early in
+the boot process when the possibility of getting physical contiguous pages
+is still very high.  Administrators can verify the number of huge pages
+actually allocated by checking the sysctl or meminfo.  To check the per node
 distribution of huge pages in a NUMA system, use:
 
 	cat /sys/devices/system/node/node*/meminfo | fgrep Huge
@@ -113,45 +115,47 @@ distribution of huge pages in a NUMA system, use:
 /proc/sys/vm/nr_overcommit_hugepages specifies how large the pool of
 huge pages can grow, if more huge pages than /proc/sys/vm/nr_hugepages are
 requested by applications.  Writing any non-zero value into this file
-indicates that the hugetlb subsystem is allowed to try to obtain "surplus"
-huge pages from the buddy allocator, when the normal pool is exhausted. As
-these surplus huge pages go out of use, they are freed back to the buddy
-allocator.
+indicates that the hugetlb subsystem is allowed to try to obtain that
+number of "surplus" huge pages from the kernel's normal page pool, when the
+persistent huge page pool is exhausted. As these surplus huge pages become
+unused, they are freed back to the kernel's normal page pool.
 
-When increasing the huge page pool size via nr_hugepages, any surplus
+When increasing the huge page pool size via nr_hugepages, any existing surplus
 pages will first be promoted to persistent huge pages.  Then, additional
 huge pages will be allocated, if necessary and if possible, to fulfill
-the new huge page pool size.
+the new persistent huge page pool size.
 
-The administrator may shrink the pool of preallocated huge pages for
+The administrator may shrink the pool of persistent huge pages for
 the default huge page size by setting the nr_hugepages sysctl to a
 smaller value.  The kernel will attempt to balance the freeing of huge pages
-across all on-line nodes.  Any free huge pages on the selected nodes will
-be freed back to the buddy allocator.
-
-Caveat: Shrinking the pool via nr_hugepages such that it becomes less
-than the number of huge pages in use will convert the balance to surplus
-huge pages even if it would exceed the overcommit value.  As long as
-this condition holds, however, no more surplus huge pages will be
-allowed on the system until one of the two sysctls are increased
-sufficiently, or the surplus huge pages go out of use and are freed.
+across all nodes in the memory policy of the task modifying nr_hugepages.
+Any free huge pages on the selected nodes will be freed back to the kernel's
+normal page pool.
+
+Caveat: Shrinking the persistent huge page pool via nr_hugepages such that
+it becomes less than the number of huge pages in use will convert the balance
+of the in-use huge pages to surplus huge pages.  This will occur even if
+the number of surplus pages it would exceed the overcommit value.  As long as
+this condition holds--that is, until nr_hugepages+nr_overcommit_hugepages is
+increased sufficiently, or the surplus huge pages go out of use and are freed--
+no more surplus huge pages will be allowed to be allocated.
 
 With support for multiple huge page pools at run-time available, much of
-the huge page userspace interface has been duplicated in sysfs. The above
-information applies to the default huge page size which will be
-controlled by the /proc interfaces for backwards compatibility. The root
-huge page control directory in sysfs is:
+the huge page userspace interface in /proc/sys/vm has been duplicated in sysfs.
+The /proc interfaces discussed above have been retained for backwards
+compatibility. The root huge page control directory in sysfs is:
 
 	/sys/kernel/mm/hugepages
 
 For each huge page size supported by the running kernel, a subdirectory
-will exist, of the form
+will exist, of the form:
 
 	hugepages-${size}kB
 
 Inside each of these directories, the same set of files will exist:
 
 	nr_hugepages
+	nr_hugepages_mempolicy
 	nr_overcommit_hugepages
 	free_hugepages
 	resv_hugepages
@@ -159,6 +163,102 @@ Inside each of these directories, the same set of files will exist:
 
 which function as described above for the default huge page-sized case.
 
+
+Interaction of Task Memory Policy with Huge Page Allocation/Freeing
+
+Whether huge pages are allocated and freed via the /proc interface or
+the /sysfs interface using the nr_hugepages_mempolicy attribute, the NUMA
+nodes from which huge pages are allocated or freed are controlled by the
+NUMA memory policy of the task that modifies the nr_hugepages_mempolicy
+sysctl or attribute.  When the nr_hugepages attribute is used, mempolicy
+is ignored.
+
+The recommended method to allocate or free huge pages to/from the kernel
+huge page pool, using the nr_hugepages example above, is:
+
+    numactl --interleave <node-list> echo 20 \
+				>/proc/sys/vm/nr_hugepages_mempolicy
+
+or, more succinctly:
+
+    numactl -m <node-list> echo 20 >/proc/sys/vm/nr_hugepages_mempolicy
+
+This will allocate or free abs(20 - nr_hugepages) to or from the nodes
+specified in <node-list>, depending on whether number of persistent huge pages
+is initially less than or greater than 20, respectively.  No huge pages will be
+allocated nor freed on any node not included in the specified <node-list>.
+
+When adjusting the persistent hugepage count via nr_hugepages_mempolicy, any
+memory policy mode--bind, preferred, local or interleave--may be used.  The
+resulting effect on persistent huge page allocation is as follows:
+
+1) Regardless of mempolicy mode [see Documentation/vm/numa_memory_policy.txt],
+   persistent huge pages will be distributed across the node or nodes
+   specified in the mempolicy as if "interleave" had been specified.
+   However, if a node in the policy does not contain sufficient contiguous
+   memory for a huge page, the allocation will not "fallback" to the nearest
+   neighbor node with sufficient contiguous memory.  To do this would cause
+   undesirable imbalance in the distribution of the huge page pool, or
+   possibly, allocation of persistent huge pages on nodes not allowed by
+   the task's memory policy.
+
+2) One or more nodes may be specified with the bind or interleave policy.
+   If more than one node is specified with the preferred policy, only the
+   lowest numeric id will be used.  Local policy will select the node where
+   the task is running at the time the nodes_allowed mask is constructed.
+   For local policy to be deterministic, the task must be bound to a cpu or
+   cpus in a single node.  Otherwise, the task could be migrated to some
+   other node at any time after launch and the resulting node will be
+   indeterminate.  Thus, local policy is not very useful for this purpose.
+   Any of the other mempolicy modes may be used to specify a single node.
+
+3) The nodes allowed mask will be derived from any non-default task mempolicy,
+   whether this policy was set explicitly by the task itself or one of its
+   ancestors, such as numactl.  This means that if the task is invoked from a
+   shell with non-default policy, that policy will be used.  One can specify a
+   node list of "all" with numactl --interleave or --membind [-m] to achieve
+   interleaving over all nodes in the system or cpuset.
+
+4) Any task mempolicy specifed--e.g., using numactl--will be constrained by
+   the resource limits of any cpuset in which the task runs.  Thus, there will
+   be no way for a task with non-default policy running in a cpuset with a
+   subset of the system nodes to allocate huge pages outside the cpuset
+   without first moving to a cpuset that contains all of the desired nodes.
+
+5) Boot-time huge page allocation attempts to distribute the requested number
+   of huge pages over all on-lines nodes with memory.
+
+Per Node Hugepages Attributes
+
+A subset of the contents of the root huge page control directory in sysfs,
+described above, will be replicated under each the system device of each
+NUMA node with memory in:
+
+	/sys/devices/system/node/node[0-9]*/hugepages/
+
+Under this directory, the subdirectory for each supported huge page size
+contains the following attribute files:
+
+	nr_hugepages
+	free_hugepages
+	surplus_hugepages
+
+The free_' and surplus_' attribute files are read-only.  They return the number
+of free and surplus [overcommitted] huge pages, respectively, on the parent
+node.
+
+The nr_hugepages attribute returns the total number of huge pages on the
+specified node.  When this attribute is written, the number of persistent huge
+pages on the parent node will be adjusted to the specified value, if sufficient
+resources exist, regardless of the task's mempolicy or cpuset constraints.
+
+Note that the number of overcommit and reserve pages remain global quantities,
+as we don't know until fault time, when the faulting task's mempolicy is
+applied, from which node the huge page allocation will be attempted.
+
+
+Using Huge Pages
+
 If the user applications are going to request huge pages using mmap system
 call, then it is required that system administrator mount a file system of
 type hugetlbfs:
@@ -206,9 +306,11 @@ map_hugetlb.c.
  * requesting huge pages.
  *
  * For the ia64 architecture, the Linux kernel reserves Region number 4 for
- * huge pages.  That means the addresses starting with 0x800000... will need
- * to be specified.  Specifying a fixed address is not required on ppc64,
- * i386 or x86_64.
+ * huge pages.  That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required.  If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
  *
  * Note: The default shared memory limit is quite low on many kernels,
  * you may need to increase it via:
@@ -237,14 +339,8 @@ map_hugetlb.c.
 
 #define dprintf(x)  printf(x)
 
-/* Only ia64 requires this */
-#ifdef __ia64__
-#define ADDR (void *)(0x8000000000000000UL)
-#define SHMAT_FLAGS (SHM_RND)
-#else
-#define ADDR (void *)(0x0UL)
+#define ADDR (void *)(0x0UL)	/* let kernel choose address */
 #define SHMAT_FLAGS (0)
-#endif
 
 int main(void)
 {
@@ -302,10 +398,12 @@ int main(void)
  * example, the app is requesting memory of size 256MB that is backed by
  * huge pages.
  *
- * For ia64 architecture, Linux kernel reserves Region number 4 for huge pages.
- * That means the addresses starting with 0x800000... will need to be
- * specified.  Specifying a fixed address is not required on ppc64, i386
- * or x86_64.
+ * For the ia64 architecture, the Linux kernel reserves Region number 4 for
+ * huge pages.  That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required.  If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
  */
 #include <stdlib.h>
 #include <stdio.h>
@@ -317,14 +415,8 @@ int main(void)
 #define LENGTH (256UL*1024*1024)
 #define PROTECTION (PROT_READ | PROT_WRITE)
 
-/* Only ia64 requires this */
-#ifdef __ia64__
-#define ADDR (void *)(0x8000000000000000UL)
-#define FLAGS (MAP_SHARED | MAP_FIXED)
-#else
-#define ADDR (void *)(0x0UL)
+#define ADDR (void *)(0x0UL)	/* let kernel choose address */
 #define FLAGS (MAP_SHARED)
-#endif
 
 void check_bytes(char *addr)
 {
diff --git a/Documentation/vm/hwpoison.txt b/Documentation/vm/hwpoison.txt
index 3ffadf8..12f9ba2 100644
--- a/Documentation/vm/hwpoison.txt
+++ b/Documentation/vm/hwpoison.txt
@@ -92,16 +92,62 @@ PR_MCE_KILL_GET
 
 Testing:
 
-madvise(MADV_POISON, ....)
+madvise(MADV_HWPOISON, ....)
 	(as root)
 	Poison a page in the process for testing
 
 
 hwpoison-inject module through debugfs
-	/sys/debug/hwpoison/corrupt-pfn
 
-Inject hwpoison fault at PFN echoed into this file
+/sys/debug/hwpoison/
 
+corrupt-pfn
+
+Inject hwpoison fault at PFN echoed into this file. This does
+some early filtering to avoid corrupted unintended pages in test suites.
+
+unpoison-pfn
+
+Software-unpoison page at PFN echoed into this file. This
+way a page can be reused again.
+This only works for Linux injected failures, not for real
+memory failures.
+
+Note these injection interfaces are not stable and might change between
+kernel versions
+
+corrupt-filter-dev-major
+corrupt-filter-dev-minor
+
+Only handle memory failures to pages associated with the file system defined
+by block device major/minor.  -1U is the wildcard value.
+This should be only used for testing with artificial injection.
+
+corrupt-filter-memcg
+
+Limit injection to pages owned by memgroup. Specified by inode number
+of the memcg.
+
+Example:
+        mkdir /cgroup/hwpoison
+
+        usemem -m 100 -s 1000 &
+        echo `jobs -p` > /cgroup/hwpoison/tasks
+
+        memcg_ino=$(ls -id /cgroup/hwpoison | cut -f1 -d' ')
+        echo $memcg_ino > /debug/hwpoison/corrupt-filter-memcg
+
+        page-types -p `pidof init`   --hwpoison  # shall do nothing
+        page-types -p `pidof usemem` --hwpoison  # poison its pages
+
+corrupt-filter-flags-mask
+corrupt-filter-flags-value
+
+When specified, only poison pages if ((page_flags & mask) == value).
+This allows stress testing of many kinds of pages. The page_flags
+are the same as in /proc/kpageflags. The flag bits are defined in
+include/linux/kernel-page-flags.h and documented in
+Documentation/vm/pagemap.txt
 
 Architecture specific MCE injector
 
diff --git a/Documentation/vm/ksm.txt b/Documentation/vm/ksm.txt
index 262d8e6..b392e49 100644
--- a/Documentation/vm/ksm.txt
+++ b/Documentation/vm/ksm.txt
@@ -16,9 +16,9 @@ by sharing the data common between them.  But it can be useful to any
 application which generates many instances of the same data.
 
 KSM only merges anonymous (private) pages, never pagecache (file) pages.
-KSM's merged pages are at present locked into kernel memory for as long
-as they are shared: so cannot be swapped out like the user pages they
-replace (but swapping KSM pages should follow soon in a later release).
+KSM's merged pages were originally locked into kernel memory, but can now
+be swapped out just like other user pages (but sharing is broken when they
+are swapped back in: ksmd must rediscover their identity and merge again).
 
 KSM only operates on those areas of address space which an application
 has advised to be likely candidates for merging, by using the madvise(2)
@@ -44,20 +44,12 @@ includes unmapped gaps (though working on the intervening mapped areas),
 and might fail with EAGAIN if not enough memory for internal structures.
 
 Applications should be considerate in their use of MADV_MERGEABLE,
-restricting its use to areas likely to benefit.  KSM's scans may use
-a lot of processing power, and its kernel-resident pages are a limited
-resource.  Some installations will disable KSM for these reasons.
+restricting its use to areas likely to benefit.  KSM's scans may use a lot
+of processing power: some installations will disable KSM for that reason.
 
 The KSM daemon is controlled by sysfs files in /sys/kernel/mm/ksm/,
 readable by all but writable only by root:
 
-max_kernel_pages - set to maximum number of kernel pages that KSM may use
-                   e.g. "echo 100000 > /sys/kernel/mm/ksm/max_kernel_pages"
-                   Value 0 imposes no limit on the kernel pages KSM may use;
-                   but note that any process using MADV_MERGEABLE can cause
-                   KSM to allocate these pages, unswappable until it exits.
-                   Default: quarter of memory (chosen to not pin too much)
-
 pages_to_scan    - how many present pages to scan before ksmd goes to sleep
                    e.g. "echo 100 > /sys/kernel/mm/ksm/pages_to_scan"
                    Default: 100 (chosen for demonstration purposes)
@@ -75,7 +67,7 @@ run              - set 0 to stop ksmd from running but keep merged pages,
 
 The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/:
 
-pages_shared     - how many shared unswappable kernel pages KSM is using
+pages_shared     - how many shared pages are being used
 pages_sharing    - how many more sites are sharing them i.e. how much saved
 pages_unshared   - how many pages unique but repeatedly checked for merging
 pages_volatile   - how many pages changing too fast to be placed in a tree
@@ -87,4 +79,4 @@ pages_volatile embraces several different kinds of activity, but a high
 proportion there would also indicate poor use of madvise MADV_MERGEABLE.
 
 Izik Eidus,
-Hugh Dickins, 24 Sept 2009
+Hugh Dickins, 17 Nov 2009
diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c
index ea44ea5..66e9358 100644
--- a/Documentation/vm/page-types.c
+++ b/Documentation/vm/page-types.c
@@ -1,11 +1,22 @@
 /*
  * page-types: Tool for querying page flags
  *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should find a copy of v2 of the GNU General Public License somewhere on
+ * your Linux system; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
  * Copyright (C) 2009 Intel corporation
  *
  * Authors: Wu Fengguang <fengguang.wu@intel.com>
- *
- * Released under the General Public License (GPL).
  */
 
 #define _LARGEFILE64_SOURCE
@@ -100,7 +111,7 @@
 #define BIT(name)		(1ULL << KPF_##name)
 #define BITS_COMPOUND		(BIT(COMPOUND_HEAD) | BIT(COMPOUND_TAIL))
 
-static char *page_flag_names[] = {
+static const char *page_flag_names[] = {
 	[KPF_LOCKED]		= "L:locked",
 	[KPF_ERROR]		= "E:error",
 	[KPF_REFERENCED]	= "R:referenced",
@@ -173,7 +184,7 @@ static int		kpageflags_fd;
 static int		opt_hwpoison;
 static int		opt_unpoison;
 
-static char		*hwpoison_debug_fs = "/debug/hwpoison";
+static const char	hwpoison_debug_fs[] = "/debug/hwpoison";
 static int		hwpoison_inject_fd;
 static int		hwpoison_forget_fd;
 
@@ -560,7 +571,7 @@ static void walk_pfn(unsigned long voffset,
 {
 	uint64_t buf[KPAGEFLAGS_BATCH];
 	unsigned long batch;
-	unsigned long pages;
+	long pages;
 	unsigned long i;
 
 	while (count) {
@@ -673,30 +684,35 @@ static void usage(void)
 
 	printf(
 "page-types [options]\n"
-"            -r|--raw                  Raw mode, for kernel developers\n"
-"            -a|--addr    addr-spec    Walk a range of pages\n"
-"            -b|--bits    bits-spec    Walk pages with specified bits\n"
-"            -p|--pid     pid          Walk process address space\n"
+"            -r|--raw                   Raw mode, for kernel developers\n"
+"            -d|--describe flags        Describe flags\n"
+"            -a|--addr    addr-spec     Walk a range of pages\n"
+"            -b|--bits    bits-spec     Walk pages with specified bits\n"
+"            -p|--pid     pid           Walk process address space\n"
 #if 0 /* planned features */
-"            -f|--file    filename     Walk file address space\n"
+"            -f|--file    filename      Walk file address space\n"
 #endif
-"            -l|--list                 Show page details in ranges\n"
-"            -L|--list-each            Show page details one by one\n"
-"            -N|--no-summary           Don't show summay info\n"
-"            -X|--hwpoison             hwpoison pages\n"
-"            -x|--unpoison             unpoison pages\n"
-"            -h|--help                 Show this usage message\n"
+"            -l|--list                  Show page details in ranges\n"
+"            -L|--list-each             Show page details one by one\n"
+"            -N|--no-summary            Don't show summay info\n"
+"            -X|--hwpoison              hwpoison pages\n"
+"            -x|--unpoison              unpoison pages\n"
+"            -h|--help                  Show this usage message\n"
+"flags:\n"
+"            0x10                       bitfield format, e.g.\n"
+"            anon                       bit-name, e.g.\n"
+"            0x10,anon                  comma-separated list, e.g.\n"
 "addr-spec:\n"
-"            N                         one page at offset N (unit: pages)\n"
-"            N+M                       pages range from N to N+M-1\n"
-"            N,M                       pages range from N to M-1\n"
-"            N,                        pages range from N to end\n"
-"            ,M                        pages range from 0 to M-1\n"
+"            N                          one page at offset N (unit: pages)\n"
+"            N+M                        pages range from N to N+M-1\n"
+"            N,M                        pages range from N to M-1\n"
+"            N,                         pages range from N to end\n"
+"            ,M                         pages range from 0 to M-1\n"
 "bits-spec:\n"
-"            bit1,bit2                 (flags & (bit1|bit2)) != 0\n"
-"            bit1,bit2=bit1            (flags & (bit1|bit2)) == bit1\n"
-"            bit1,~bit2                (flags & (bit1|bit2)) == bit1\n"
-"            =bit1,bit2                flags == (bit1|bit2)\n"
+"            bit1,bit2                  (flags & (bit1|bit2)) != 0\n"
+"            bit1,bit2=bit1             (flags & (bit1|bit2)) == bit1\n"
+"            bit1,~bit2                 (flags & (bit1|bit2)) == bit1\n"
+"            =bit1,bit2                 flags == (bit1|bit2)\n"
 "bit-names:\n"
 	);
 
@@ -884,13 +900,23 @@ static void parse_bits_mask(const char *optarg)
 	add_bits_filter(mask, bits);
 }
 
+static void describe_flags(const char *optarg)
+{
+	uint64_t flags = parse_flag_names(optarg, 0);
+
+	printf("0x%016llx\t%s\t%s\n",
+		(unsigned long long)flags,
+		page_flag_name(flags),
+		page_flag_longname(flags));
+}
 
-static struct option opts[] = {
+static const struct option opts[] = {
 	{ "raw"       , 0, NULL, 'r' },
 	{ "pid"       , 1, NULL, 'p' },
 	{ "file"      , 1, NULL, 'f' },
 	{ "addr"      , 1, NULL, 'a' },
 	{ "bits"      , 1, NULL, 'b' },
+	{ "describe"  , 1, NULL, 'd' },
 	{ "list"      , 0, NULL, 'l' },
 	{ "list-each" , 0, NULL, 'L' },
 	{ "no-summary", 0, NULL, 'N' },
@@ -907,7 +933,7 @@ int main(int argc, char *argv[])
 	page_size = getpagesize();
 
 	while ((c = getopt_long(argc, argv,
-				"rp:f:a:b:lLNXxh", opts, NULL)) != -1) {
+				"rp:f:a:b:d:lLNXxh", opts, NULL)) != -1) {
 		switch (c) {
 		case 'r':
 			opt_raw = 1;
@@ -924,6 +950,9 @@ int main(int argc, char *argv[])
 		case 'b':
 			parse_bits_mask(optarg);
 			break;
+		case 'd':
+			describe_flags(optarg);
+			exit(0);
 		case 'l':
 			opt_list = 1;
 			break;