summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-10-15 08:07:35 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-10-15 08:07:35 -0700
commit5f2434a66dfa4701b81b79a78eaf9c32da0f8839 (patch)
tree8c38f1fb0d0fbcd15e496df89be00ad8c4918a43 /Documentation
parent278429cff8809958d25415ba0ed32b59866ab1a8 (diff)
parent6dc6472581f693b5fc95aebedf67b4960fb85cf0 (diff)
downloadop-kernel-dev-5f2434a66dfa4701b81b79a78eaf9c32da0f8839.zip
op-kernel-dev-5f2434a66dfa4701b81b79a78eaf9c32da0f8839.tar.gz
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (158 commits) powerpc: Fix CHRP PCI config access for indirect_pci powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPs powerpc: Fix 32-bit SMP boot on CHRP powerpc: Fix link errors on 32-bit machines using legacy DMA powerpc/pci: Improve detection of unassigned bridge resources hvc_console: Fix free_irq in spinlocked section powerpc: Get USE_STRICT_MM_TYPECHECKS working again powerpc: Reflect the used arguments in machine_init() prototype powerpc: Fix DMA offset for non-coherent DMA powerpc: fix fsl_upm nand driver modular build powerpc/83xx: add NAND support for the MPC8360E-RDK boards powerpc: FPGA support for GE Fanuc SBC610 i2c: MPC8349E-mITX Power Management and GPIO expander driver powerpc: reserve two DMA channels for audio in MPC8610 HPCD device tree powerpc: document the "fsl,ssi-dma-channel" compatible property powerpc: disable CHRP and PMAC support in various defconfigs OF: add fsl,mcu-mpc8349emitx to the exception list powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards powerpc: remove support for bootmem-allocated memory for the DIU driver powerpc: remove non-dependent load fsl_booke PTE_64BIT ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/powerpc/00-INDEX4
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt40
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt40
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/dma.txt13
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/ssi.txt23
-rw-r--r--Documentation/powerpc/ppc_htab.txt118
-rw-r--r--Documentation/powerpc/smp.txt34
7 files changed, 114 insertions, 158 deletions
diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX
index 29d839c..e3960b8 100644
--- a/Documentation/powerpc/00-INDEX
+++ b/Documentation/powerpc/00-INDEX
@@ -18,10 +18,6 @@ mpc52xx.txt
- Linux 2.6.x on MPC52xx family
mpc52xx-device-tree-bindings.txt
- MPC5200 Device Tree Bindings
-ppc_htab.txt
- - info about the Linux/PPC /proc/ppc_htab entry
-smp.txt
- - use and state info about Linux/PPC on MP machines
sound.txt
- info on sound support under Linux/PPC
zImage_layout.txt
diff --git a/Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt b/Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt
new file mode 100644
index 0000000..35a4653
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/83xx-512x-pci.txt
@@ -0,0 +1,40 @@
+* Freescale 83xx and 512x PCI bridges
+
+Freescale 83xx and 512x SOCs include the same pci bridge core.
+
+83xx/512x specific notes:
+- reg: should contain two address length tuples
+ The first is for the internal pci bridge registers
+ The second is for the pci config space access registers
+
+Example (MPC8313ERDB)
+ pci0: pci@e0008500 {
+ cell-index = <1>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0E -mini PCI */
+ 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+ 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+ 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+ 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+ /* IDSEL 0x0F - PCI slot */
+ 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+ 0x7800 0x0 0x0 0x2 &ipic 18 0x8
+ 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+ 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <66 0x8>;
+ bus-range = <0x0 0x0>;
+ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+ 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ clock-frequency = <66666666>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
diff --git a/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt b/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt
new file mode 100644
index 0000000..d015dce
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt
@@ -0,0 +1,40 @@
+GPIO controllers on MPC8xxx SoCs
+
+This is for the non-QE/CPM/GUTs GPIO controllers as found on
+8349, 8572, 8610 and compatible.
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Required properties:
+- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
+ 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters (currently unused).
+ - interrupts : Interrupt mapping for GPIO IRQ (currently unused).
+ - interrupt-parent : Phandle for the interrupt controller that
+ services interrupts for this device.
+- gpio-controller : Marks the port as GPIO controller.
+
+Example of gpio-controller nodes for a MPC8347 SoC:
+
+ gpio1: gpio-controller@c00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
+ reg = <0xc00 0x100>;
+ interrupts = <74 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+ gpio2: gpio-controller@d00 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
+ reg = <0xd00 0x100>;
+ interrupts = <75 0x8>;
+ interrupt-parent = <&ipic>;
+ gpio-controller;
+ };
+
+See booting-without-of.txt for details of how to specify GPIO
+information for devices.
diff --git a/Documentation/powerpc/dts-bindings/fsl/dma.txt b/Documentation/powerpc/dts-bindings/fsl/dma.txt
index 86826df..cc45311 100644
--- a/Documentation/powerpc/dts-bindings/fsl/dma.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/dma.txt
@@ -20,7 +20,7 @@ Required properties:
- compatible : compatible list, contains 2 entries, first is
"fsl,CHIP-dma-channel", where CHIP is the processor
(mpc8349, mpc8350, etc.) and the second is
- "fsl,elo-dma-channel"
+ "fsl,elo-dma-channel". However, see note below.
- reg : <registers mapping for channel>
- cell-index : dma channel index starts at 0.
@@ -82,7 +82,7 @@ Required properties:
- compatible : compatible list, contains 2 entries, first is
"fsl,CHIP-dma-channel", where CHIP is the processor
(mpc8540, mpc8560, etc.) and the second is
- "fsl,eloplus-dma-channel"
+ "fsl,eloplus-dma-channel". However, see note below.
- cell-index : dma channel index starts at 0.
- reg : <registers mapping for channel>
- interrupts : <interrupt mapping for DMA channel IRQ>
@@ -125,3 +125,12 @@ Example:
interrupts = <17 2>;
};
};
+
+Note on DMA channel compatible properties: The compatible property must say
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
+driver (fsldma). Any DMA channel used by fsldma cannot be used by another
+DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA
+channel that should be used for another driver should not use
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for
+example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt
+for more information.
diff --git a/Documentation/powerpc/dts-bindings/fsl/ssi.txt b/Documentation/powerpc/dts-bindings/fsl/ssi.txt
index d100555..a2d9639 100644
--- a/Documentation/powerpc/dts-bindings/fsl/ssi.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/ssi.txt
@@ -24,6 +24,12 @@ Required properties:
"rj-master" - r.j., SSI is clock master
"ac97-slave" - AC97 mode, SSI is clock slave
"ac97-master" - AC97 mode, SSI is clock master
+- fsl,playback-dma: phandle to a node for the DMA channel to use for
+ playback of audio. This is typically dictated by SOC
+ design. See the notes below.
+- fsl,capture-dma: phandle to a node for the DMA channel to use for
+ capture (recording) of audio. This is typically dictated
+ by SOC design. See the notes below.
Optional properties:
- codec-handle : phandle to a 'codec' node that defines an audio
@@ -36,3 +42,20 @@ Child 'codec' node required properties:
Child 'codec' node optional properties:
- clock-frequency : The frequency of the input clock, which typically
comes from an on-board dedicated oscillator.
+
+Notes on fsl,playback-dma and fsl,capture-dma:
+
+On SOCs that have an SSI, specific DMA channels are hard-wired for playback
+and capture. On the MPC8610, for example, SSI1 must use DMA channel 0 for
+playback and DMA channel 1 for capture. SSI2 must use DMA channel 2 for
+playback and DMA channel 3 for capture. The developer can choose which
+DMA controller to use, but the channels themselves are hard-wired. The
+purpose of these two properties is to represent this hardware design.
+
+The device tree nodes for the DMA channels that are referenced by
+"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
+"fsl,ssi-dma-channel". The SOC-specific compatible string (e.g.
+"fsl,mpc8610-dma-channel") can remain. If these nodes are left as
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA
+drivers (fsldma) will attempt to use them, and it will conflict with the
+sound drivers.
diff --git a/Documentation/powerpc/ppc_htab.txt b/Documentation/powerpc/ppc_htab.txt
deleted file mode 100644
index 8b8c7df..0000000
--- a/Documentation/powerpc/ppc_htab.txt
+++ /dev/null
@@ -1,118 +0,0 @@
- Information about /proc/ppc_htab
-=====================================================================
-
-This document and the related code was written by me (Cort Dougan), please
-email me (cort@fsmlabs.com) if you have questions, comments or corrections.
-
-Last Change: 2.16.98
-
-This entry in the proc directory is readable by all users but only
-writable by root.
-
-The ppc_htab interface is a user level way of accessing the
-performance monitoring registers as well as providing information
-about the PTE hash table.
-
-1. Reading
-
- Reading this file will give you information about the memory management
- hash table that serves as an extended tlb for page translation on the
- powerpc. It will also give you information about performance measurement
- specific to the cpu that you are using.
-
- Explanation of the 604 Performance Monitoring Fields:
- MMCR0 - the current value of the MMCR0 register
- PMC1
- PMC2 - the value of the performance counters and a
- description of what events they are counting
- which are based on MMCR0 bit settings.
- Explanation of the PTE Hash Table fields:
-
- Size - hash table size in Kb.
- Buckets - number of buckets in the table.
- Address - the virtual kernel address of the hash table base.
- Entries - the number of ptes that can be stored in the hash table.
- User/Kernel - how many pte's are in use by the kernel or user at that time.
- Overflows - How many of the entries are in their secondary hash location.
- Percent full - ratio of free pte entries to in use entries.
- Reloads - Count of how many hash table misses have occurred
- that were fixed with a reload from the linux tables.
- Should always be 0 on 603 based machines.
- Non-error Misses - Count of how many hash table misses have occurred
- that were completed with the creation of a pte in the linux
- tables with a call to do_page_fault().
- Error Misses - Number of misses due to errors such as bad address
- and permission violations. This includes kernel access of
- bad user addresses that are fixed up by the trap handler.
-
- Note that calculation of the data displayed from /proc/ppc_htab takes
- a long time and spends a great deal of time in the kernel. It would
- be quite hard on performance to read this file constantly. In time
- there may be a counter in the kernel that allows successive reads from
- this file only after a given amount of time has passed to reduce the
- possibility of a user slowing the system by reading this file.
-
-2. Writing
-
- Writing to the ppc_htab allows you to change the characteristics of
- the powerpc PTE hash table and setup performance monitoring.
-
- Resizing the PTE hash table is not enabled right now due to many
- complications with moving the hash table, rehashing the entries
- and many many SMP issues that would have to be dealt with.
-
- Write options to ppc_htab:
-
- - To set the size of the hash table to 64Kb:
-
- echo 'size 64' > /proc/ppc_htab
-
- The size must be a multiple of 64 and must be greater than or equal to
- 64.
-
- - To turn off performance monitoring:
-
- echo 'off' > /proc/ppc_htab
-
- - To reset the counters without changing what they're counting:
-
- echo 'reset' > /proc/ppc_htab
-
- Note that counting will continue after the reset if it is enabled.
-
- - To count only events in user mode or only in kernel mode:
-
- echo 'user' > /proc/ppc_htab
- ...or...
- echo 'kernel' > /proc/ppc_htab
-
- Note that these two options are exclusive of one another and the
- lack of either of these options counts user and kernel.
- Using 'reset' and 'off' reset these flags.
-
- - The 604 has 2 performance counters which can each count events from
- a specific set of events. These sets are disjoint so it is not
- possible to count _any_ combination of 2 events. One event can
- be counted by PMC1 and one by PMC2.
-
- To start counting a particular event use:
-
- echo 'event' > /proc/ppc_htab
-
- and choose from these events:
-
- PMC1
- ----
- 'ic miss' - instruction cache misses
- 'dtlb' - data tlb misses (not hash table misses)
-
- PMC2
- ----
- 'dc miss' - data cache misses
- 'itlb' - instruction tlb misses (not hash table misses)
- 'load miss time' - cycles to complete a load miss
-
-3. Bugs
-
- The PMC1 and PMC2 counters can overflow and give no indication of that
- in /proc/ppc_htab.
diff --git a/Documentation/powerpc/smp.txt b/Documentation/powerpc/smp.txt
deleted file mode 100644
index 5b581b8..0000000
--- a/Documentation/powerpc/smp.txt
+++ /dev/null
@@ -1,34 +0,0 @@
- Information about Linux/PPC SMP mode
-=====================================================================
-
-This document and the related code was written by me
-(Cort Dougan, cort@fsmlabs.com) please email me if you have questions,
-comments or corrections.
-
-Last Change: 3.31.99
-
-If you want to help by writing code or testing different hardware please
-email me!
-
-1. State of Supported Hardware
-
- PowerSurge Architecture - tested on UMAX s900, Apple 9600
- The second processor on this machine boots up just fine and
- enters its idle loop. Hopefully a completely working SMP kernel
- on this machine will be done shortly.
-
- The code makes the assumption of only two processors. The changes
- necessary to work with any number would not be overly difficult but
- I don't have any machines with >2 processors so it's not high on my
- list of priorities. If anyone else would like do to the work email
- me and I can point out the places that need changed. If you have >2
- processors and don't want to add support yourself let me know and I
- can take a look into it.
-
- BeBox
- BeBox support hasn't been added to the 2.1.X kernels from 2.0.X
- but work is being done and SMP support for BeBox is in the works.
-
- CHRP
- CHRP SMP works and is fairly solid. It's been tested on the IBM F50
- with 4 processors for quite some time now.
OpenPOWER on IntegriCloud