summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorTakashi Iwai <tiwai@suse.de>2005-09-05 17:12:29 +0200
committerJaroslav Kysela <perex@suse.cz>2005-09-12 10:41:43 +0200
commit6243008b82222d6244b055beeeba94b14f23b7e2 (patch)
treed390cbdaa701221b1815c276d02b7df20ceaeb7e /Documentation
parent0be3b5d3fb94c36c517655d18a936681d7108667 (diff)
downloadop-kernel-dev-6243008b82222d6244b055beeeba94b14f23b7e2.zip
op-kernel-dev-6243008b82222d6244b055beeeba94b14f23b7e2.tar.gz
[ALSA] Update/fix ALSA document
Documentation Update/fix ALSA document. Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt106
1 files changed, 70 insertions, 36 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index f626f4a..a7fc75f 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -75,7 +75,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
adsp_map - PCM device number maps assigned to the 2st OSS device.
- Default: 1
nonblock_open
- - Don't block opening busy PCM devices.
+ - Don't block opening busy PCM devices. Default: 1
For example, when dsp_map=2, /dev/dsp will be mapped to PCM #2 of
the card #0. Similarly, when adsp_map=0, /dev/adsp will be mapped
@@ -199,15 +199,20 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module snd-atiixp
-----------------
- Module for ATI IXP 150/200/250 AC97 controllers.
+ Module for ATI IXP 150/200/250/400 AC97 controllers.
- ac97_clock - AC'97 clock (defalut = 48000)
+ ac97_clock - AC'97 clock (default = 48000)
ac97_quirk - AC'97 workaround for strange hardware
- See the description of intel8x0 module for details.
+ See "AC97 Quirk Option" section below.
spdif_aclink - S/PDIF transfer over AC-link (default = 1)
This module supports up to 8 cards and autoprobe.
+ ATI IXP has two different methods to control SPDIF output. One is
+ over AC-link and another is over the "direct" SPDIF output. The
+ implementation depends on the motherboard, and you'll need to
+ choose the correct one via spdif_aclink module option.
+
Module snd-atiixp-modem
-----------------------
@@ -240,7 +245,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
The hardware EQ hardware and SPDIF is only present in the Vortex2 and
Advantage.
- Note: Some ALSA mixer applicactions don't handle the SPDIF samplerate
+ Note: Some ALSA mixer applications don't handle the SPDIF sample rate
control correctly. If you have problems regarding this, try
another ALSA compliant mixer (alsamixer works).
@@ -312,7 +317,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
mpu_port - 0x300,0x310,0x320,0x330, 0 = disable (default)
fm_port - 0x388 (default), 0 = disable (default)
- soft_ac3 - Sofware-conversion of raw SPDIF packets (model 033 only)
+ soft_ac3 - Software-conversion of raw SPDIF packets (model 033 only)
(default = 1)
joystick_port - Joystick port address (0 = disable, 1 = auto-detect)
@@ -394,7 +399,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for PCI sound cards based on CS4610/CS4612/CS4614/CS4615/CS4622/
CS4624/CS4630/CS4280 PCI chips.
- external_amp - Force to enable external amplifer.
+ external_amp - Force to enable external amplifier.
thinkpad - Force to enable Thinkpad's CLKRUN control.
mmap_valid - Support OSS mmap mode (default = 0).
@@ -630,7 +635,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
VIA VT8251/VT8237A
model - force the model name
- position_fix - Fix DMA pointer (0 = FIFO size, 1 = none, 2 = POSBUF)
+ position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size)
Module supports up to 8 cards.
@@ -666,6 +671,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
allout 5-jack in back, 2-jack in front, SPDIF out
auto auto-config reading BIOS (default)
+ If the default configuration doesn't work and one of the above
+ matches with your device, report it together with the PCI
+ subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
+ ML (see the section "Links and Addresses").
+
Note 2: If you get click noises on output, try the module option
position_fix=1 or 2. position_fix=1 will use the SD_LPIB
register value without FIFO size correction as the current
@@ -793,18 +803,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
ac97_clock - AC'97 codec clock base (0 = auto-detect)
ac97_quirk - AC'97 workaround for strange hardware
- The following strings are accepted:
- default = don't override the default setting
- disable = disable the quirk
- hp_only = use headphone control as master
- swap_hp = swap headphone and master controls
- swap_surround = swap master and surround controls
- ad_sharing = for AD1985, turn on OMS bit and use headphone
- alc_jack = for ALC65x, turn on the jack sense mode
- inv_eapd = inverted EAPD implementation
- mute_led = bind EAPD bit for turning on/off mute LED
- For backward compatibility, the corresponding integer
- value -1, 0, ... are accepted, too.
+ See "AC97 Quirk Option" section below.
buggy_irq - Enable workaround for buggy interrupts on some
motherboards (default off)
@@ -818,13 +817,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
motherboard has these devices, use the ns558 or snd-mpu401
modules, respectively.
- The ac97_quirk option is used to enable/override the workaround
- for specific devices. Some hardware have swapped output pins
- between Master and Headphone, or Surround. The driver provides
- the auto-detection of known problematic devices, but some might
- be unknown or wrongly detected. In such a case, pass the proper
- value with this option.
-
The power-management is supported.
Module snd-intel8x0m
@@ -976,7 +968,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
with machines with other (most likely CS423x or OPL3SAx) chips,
even though the device is detected in lspci. In such a case, try
other drivers, e.g. snd-cs4232 or snd-opl3sa2. Some has ISA-PnP
- but some doesn't have ISA PnP. You'll need to speicfy isapnp=0
+ but some doesn't have ISA PnP. You'll need to specify isapnp=0
and proper hardware parameters in the case without ISA PnP.
Note: some laptops need a workaround for AC97 RESET. For the
@@ -1312,7 +1304,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
channels
[VIA8233/C, 8235, 8237 only]
ac97_quirk - AC'97 workaround for strange hardware
- See the description of intel8x0 module for details.
+ See "AC97 Quirk Option" section below.
Module supports autoprobe and multiple bus-master chips (max 8).
@@ -1337,16 +1329,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
"lspci -nv").
If dxs_support=5 does not work, try dxs_support=4; if it
doesn't work too, try dxs_support=1. (dxs_support=1 is
- usually for old motherboards. The correct implementated
+ usually for old motherboards. The correct implemented
board should work with 4 or 5.) If it still doesn't
work and the default setting is ok, dxs_support=3 is the
right choice. If the default setting doesn't work at all,
try dxs_support=2 to disable the DXS channels.
In any cases, please let us know the result and the
- subsystem vendor/device ids.
+ subsystem vendor/device ids. See "Links and Addresses"
+ below.
Note: for the MPU401 on VIA823x, use snd-mpu401 driver
- additonally. The mpu_port option is for VIA686 chips only.
+ additionally. The mpu_port option is for VIA686 chips only.
Module snd-via82xx-modem
------------------------
@@ -1408,8 +1401,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module supports up to 8 cards. The module is compiled only when
PCMCIA is supported on kernel.
- To activate the driver via the card manager, you'll need to set
- up /etc/pcmcia/vxpocket.conf. See the sound/pcmcia/vx/vxpocket.c.
+ With the older 2.6.x kernel, to activate the driver via the card
+ manager, you'll need to set up /etc/pcmcia/vxpocket.conf. See the
+ sound/pcmcia/vx/vxpocket.c. 2.6.13 or later kernel requires no
+ longer require a config file.
When the driver is compiled as a module and the hotplug firmware
is supported, the firmware data is loaded via hotplug automatically.
@@ -1421,6 +1416,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Note: the driver is build only when CONFIG_ISA is set.
+ Note2: snd-vxp440 driver is merged to snd-vxpocket driver since
+ ALSA 1.0.10.
+
Module snd-ymfpci
-----------------
@@ -1446,6 +1444,37 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Note: the driver is build only when CONFIG_ISA is set.
+AC97 Quirk Option
+=================
+
+The ac97_quirk option is used to enable/override the workaround for
+specific devices on drivers for on-board AC'97 controllers like
+snd-intel8x0. Some hardware have swapped output pins between Master
+and Headphone, or Surround (thanks to confusion of AC'97
+specifications from version to version :-)
+
+The driver provides the auto-detection of known problematic devices,
+but some might be unknown or wrongly detected. In such a case, pass
+the proper value with this option.
+
+The following strings are accepted:
+ - default Don't override the default setting
+ - disable Disable the quirk
+ - hp_only Bind Master and Headphone controls as a single control
+ - swap_hp Swap headphone and master controls
+ - swap_surround Swap master and surround controls
+ - ad_sharing For AD1985, turn on OMS bit and use headphone
+ - alc_jack For ALC65x, turn on the jack sense mode
+ - inv_eapd Inverted EAPD implementation
+ - mute_led Bind EAPD bit for turning on/off mute LED
+
+For backward compatibility, the corresponding integer value -1, 0,
+... are accepted, too.
+
+For example, if "Master" volume control has no effect on your device
+but only "Headphone" does, pass ac97_quirk=hp_only module option.
+
+
Configuring Non-ISAPNP Cards
============================
@@ -1599,9 +1628,14 @@ commands to the snd-page-alloc driver:
use.
-Links
-=====
+Links and Addresses
+===================
ALSA project homepage
http://www.alsa-project.org
+ ALSA Bug Tracking System
+ https://bugtrack.alsa-project.org/bugs/
+
+ ALSA Developers ML
+ mailto:alsa-devel@lists.sourceforge.net
OpenPOWER on IntegriCloud