summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-11-16 16:05:01 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-11-16 16:05:01 -0800
commitcf9b0772f2e410645fece13b749bd56505b998b8 (patch)
tree8b171a2c49d1e9e41d4e43fb91602e664cde8551 /Documentation
parent527d1470744d338c912f94bc1f4dba08ffdff349 (diff)
parent339cd0ea082287ea8e2b7e7159a5a33665a2cbe3 (diff)
downloadop-kernel-dev-cf9b0772f2e410645fece13b749bd56505b998b8.zip
op-kernel-dev-cf9b0772f2e410645fece13b749bd56505b998b8.tar.gz
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt6
-rw-r--r--Documentation/devicetree/bindings/arm/samsung/pmu.txt1
-rw-r--r--Documentation/devicetree/bindings/firmware/qcom,scm.txt2
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt27
-rw-r--r--Documentation/devicetree/bindings/mips/brcm/soc.txt153
-rw-r--r--Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt61
-rw-r--r--Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt1
-rw-r--r--Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt51
-rw-r--r--Documentation/devicetree/bindings/reset/renesas,rst.txt1
-rw-r--r--Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt33
-rw-r--r--Documentation/devicetree/bindings/reset/uniphier-reset.txt3
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/bman.txt12
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/qman.txt26
-rw-r--r--Documentation/devicetree/bindings/soc/mediatek/pwrap.txt6
14 files changed, 368 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
index 0d0c1ae..790e6b0 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
@@ -164,6 +164,8 @@ Control registers for this memory controller's DDR PHY.
Required properties:
- compatible : should contain one of these
+ "brcm,brcmstb-ddr-phy-v71.1"
+ "brcm,brcmstb-ddr-phy-v72.0"
"brcm,brcmstb-ddr-phy-v225.1"
"brcm,brcmstb-ddr-phy-v240.1"
"brcm,brcmstb-ddr-phy-v240.2"
@@ -184,7 +186,9 @@ Sequencer DRAM parameters and control registers. Used for Self-Refresh
Power-Down (SRPD), among other things.
Required properties:
-- compatible : should contain "brcm,brcmstb-memc-ddr"
+- compatible : should contain one of these
+ "brcm,brcmstb-memc-ddr-rev-b.2.2"
+ "brcm,brcmstb-memc-ddr"
- reg : the MEMC DDR register range
Example:
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
index 088584a..779f561 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
@@ -4,7 +4,6 @@ Properties:
- compatible : should contain two values. First value must be one from following list:
- "samsung,exynos3250-pmu" - for Exynos3250 SoC,
- "samsung,exynos4210-pmu" - for Exynos4210 SoC,
- - "samsung,exynos4212-pmu" - for Exynos4212 SoC,
- "samsung,exynos4412-pmu" - for Exynos4412 SoC,
- "samsung,exynos5250-pmu" - for Exynos5250 SoC,
- "samsung,exynos5260-pmu" - for Exynos5260 SoC.
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index 20f26fb..7b40054 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -18,6 +18,8 @@ Required properties:
* Core, iface, and bus clocks required for "qcom,scm"
- clock-names: Must contain "core" for the core clock, "iface" for the interface
clock and "bus" for the bus clock per the requirements of the compatible.
+- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
+ download mode control register (optional)
Example for MSM8916:
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt
new file mode 100644
index 0000000..82d923e
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt
@@ -0,0 +1,27 @@
+DDR PHY Front End (DPFE) for Broadcom STB
+=========================================
+
+DPFE and the DPFE firmware provide an interface for the host CPU to
+communicate with the DCPU, which resides inside the DDR PHY.
+
+There are three memory regions for interacting with the DCPU. These are
+specified in a single reg property.
+
+Required properties:
+ - compatible: must be "brcm,bcm7271-dpfe-cpu", "brcm,bcm7268-dpfe-cpu"
+ or "brcm,dpfe-cpu"
+ - reg: must reference three register ranges
+ - start address and length of the DCPU register space
+ - start address and length of the DCPU data memory space
+ - start address and length of the DCPU instruction memory space
+ - reg-names: must contain "dpfe-cpu", "dpfe-dmem", and "dpfe-imem";
+ they must be in the same order as the register declarations
+
+Example:
+ dpfe_cpu0: dpfe-cpu@f1132000 {
+ compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu";
+ reg = <0xf1132000 0x180
+ 0xf1134000 0x1000
+ 0xf1138000 0x4000>;
+ reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem";
+ };
diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt
index e4e1cd9..356c297 100644
--- a/Documentation/devicetree/bindings/mips/brcm/soc.txt
+++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt
@@ -11,3 +11,156 @@ Required properties:
The experimental -viper variants are for running Linux on the 3384's
BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor.
+
+Power management
+----------------
+
+For power management (particularly, S2/S3/S5 system suspend), the following SoC
+components are needed:
+
+= Always-On control block (AON CTRL)
+
+This hardware provides control registers for the "always-on" (even in low-power
+modes) hardware, such as the Power Management State Machine (PMSM).
+
+Required properties:
+- compatible : should be one of
+ "brcm,bcm7425-aon-ctrl"
+ "brcm,bcm7429-aon-ctrl"
+ "brcm,bcm7435-aon-ctrl" and
+ "brcm,brcmstb-aon-ctrl"
+- reg : the register start and length for the AON CTRL block
+
+Example:
+
+syscon@410000 {
+ compatible = "brcm,bcm7425-aon-ctrl", "brcm,brcmstb-aon-ctrl";
+ reg = <0x410000 0x400>;
+};
+
+= Memory controllers
+
+A Broadcom STB SoC typically has a number of independent memory controllers,
+each of which may have several associated hardware blocks, which are versioned
+independently (control registers, DDR PHYs, etc.). One might consider
+describing these controllers as a parent "memory controllers" block, which
+contains N sub-nodes (one for each controller in the system), each of which is
+associated with a number of hardware register resources (e.g., its PHY.
+
+== MEMC (MEMory Controller)
+
+Represents a single memory controller instance.
+
+Required properties:
+- compatible : should contain "brcm,brcmstb-memc" and "simple-bus"
+- ranges : should contain the child address in the parent address
+ space, must be 0 here, and the register start and length of
+ the entire memory controller (including all sub nodes: DDR PHY,
+ arbiter, etc.)
+- #address-cells : must be 1
+- #size-cells : must be 1
+
+Example:
+
+ memory-controller@0 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges = <0x0 0x0 0xa000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memc-arb@1000 {
+ ...
+ };
+
+ memc-ddr@2000 {
+ ...
+ };
+
+ ddr-phy@6000 {
+ ...
+ };
+ };
+
+Should contain subnodes for any of the following relevant hardware resources:
+
+== DDR PHY control
+
+Control registers for this memory controller's DDR PHY.
+
+Required properties:
+- compatible : should contain one of these
+ "brcm,brcmstb-ddr-phy-v64.5"
+ "brcm,brcmstb-ddr-phy"
+
+- reg : the DDR PHY register range and length
+
+Example:
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy-v64.5";
+ reg = <0x6000 0xc8>;
+ };
+
+== DDR memory controller sequencer
+
+Control registers for this memory controller's DDR memory sequencer
+
+Required properties:
+- compatible : should contain one of these
+ "brcm,bcm7425-memc-ddr"
+ "brcm,bcm7429-memc-ddr"
+ "brcm,bcm7435-memc-ddr" and
+ "brcm,brcmstb-memc-ddr"
+
+- reg : the DDR sequencer register range and length
+
+Example:
+
+ memc-ddr@2000 {
+ compatible = "brcm,bcm7425-memc-ddr", "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x300>;
+ };
+
+== MEMC Arbiter
+
+The memory controller arbiter is responsible for memory clients allocation
+(bandwidth, priorities etc.) and needs to have its contents restored during
+deep sleep states (S3).
+
+Required properties:
+
+- compatible : should contain one of these
+ "brcm,brcmstb-memc-arb-v10.0.0.0"
+ "brcm,brcmstb-memc-arb"
+
+- reg : the DDR Arbiter register range and length
+
+Example:
+
+ memc-arb@1000 {
+ compatible = "brcm,brcmstb-memc-arb-v10.0.0.0";
+ reg = <0x1000 0x248>;
+ };
+
+== Timers
+
+The Broadcom STB chips contain a timer block with several general purpose
+timers that can be used.
+
+Required properties:
+
+- compatible : should contain one of:
+ "brcm,bcm7425-timers"
+ "brcm,bcm7429-timers"
+ "brcm,bcm7435-timers and
+ "brcm,brcmstb-timers"
+- reg : the timers register range
+- interrupts : the interrupt line for this timer block
+
+Example:
+
+ timers: timer@4067c0 {
+ compatible = "brcm,bcm7425-timers", "brcm,brcmstb-timers";
+ reg = <0x4067c0 0x40>;
+ interrupts = <&periph_intc 19>;
+ };
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
new file mode 100644
index 0000000..1cd050b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
@@ -0,0 +1,61 @@
+Amlogic Meson Power Controller
+==============================
+
+The Amlogic Meson SoCs embeds an internal Power domain controller.
+
+VPU Power Domain
+----------------
+
+The Video Processing Unit power domain is controlled by this power controller,
+but the domain requires some external resources to meet the correct power
+sequences.
+The bindings must respect the power domain bindings as described in the file
+power_domain.txt
+
+Device Tree Bindings:
+---------------------
+
+Required properties:
+- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+- #power-domain-cells: should be 0
+- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node
+- resets: phandles to the reset lines needed for this power demain sequence
+ as described in ../reset/reset.txt
+- clocks: from common clock binding: handle to VPU and VAPB clocks
+- clock-names: from common clock binding: must contain "vpu", "vapb"
+ corresponding to entry in the clocks property.
+
+Parent node should have the following properties :
+- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
+- reg: base address and size of the AO system control register space.
+
+Example:
+-------
+
+ao_sysctrl: sys-ctrl@0 {
+ compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+ reg = <0x0 0x0 0x0 0x100>;
+
+ pwrc_vpu: power-controller-vpu {
+ compatible = "amlogic,meson-gx-pwrc-vpu";
+ #power-domain-cells = <0>;
+ amlogic,hhi-sysctrl = <&sysctrl>;
+ resets = <&reset RESET_VIU>,
+ <&reset RESET_VENC>,
+ <&reset RESET_VCBUS>,
+ <&reset RESET_BT656>,
+ <&reset RESET_DVIN_RESET>,
+ <&reset RESET_RDMA>,
+ <&reset RESET_VENCI>,
+ <&reset RESET_VENCP>,
+ <&reset RESET_VDAC>,
+ <&reset RESET_VDI6>,
+ <&reset RESET_VENCL>,
+ <&reset RESET_VID_LOCK>;
+ clocks = <&clkc CLKID_VPU>,
+ <&clkc CLKID_VAPB>;
+ clock-names = "vpu", "vapb";
+ };
+};
+
+
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
index 98cc8c0..8690f10 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
@@ -17,6 +17,7 @@ Required properties:
- "renesas,r8a7794-sysc" (R-Car E2)
- "renesas,r8a7795-sysc" (R-Car H3)
- "renesas,r8a7796-sysc" (R-Car M3-W)
+ - "renesas,r8a77970-sysc" (R-Car V3M)
- "renesas,r8a77995-sysc" (R-Car D3)
- reg: Address start and address range for the device.
- #power-domain-cells: Must be 1.
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt
new file mode 100644
index 0000000..8562ba1
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt
@@ -0,0 +1,51 @@
+Qualcomm Remote File System Memory binding
+
+This binding describes the Qualcomm remote filesystem memory, which serves the
+purpose of describing the shared memory region used for remote processors to
+access block device data using the Remote Filesystem protocol.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be:
+ "qcom,rmtfs-mem"
+
+- reg:
+ Usage: required for static allocation
+ Value type: <prop-encoded-array>
+ Definition: must specify base address and size of the memory region,
+ as described in reserved-memory.txt
+
+- size:
+ Usage: required for dynamic allocation
+ Value type: <prop-encoded-array>
+ Definition: must specify a size of the memory region, as described in
+ reserved-memory.txt
+
+- qcom,client-id:
+ Usage: required
+ Value type: <u32>
+ Definition: identifier of the client to use this region for buffers.
+
+- qcom,vmid:
+ Usage: optional
+ Value type: <u32>
+ Definition: vmid of the remote processor, to set up memory protection.
+
+= EXAMPLE
+The following example shows the remote filesystem memory setup for APQ8016,
+with the rmtfs region for the Hexagon DSP (id #1) located at 0x86700000.
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ rmtfs@86700000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0x86700000 0x0 0xe0000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
index e5a03ff..a8014f3 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.txt
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt
@@ -26,6 +26,7 @@ Required properties:
- "renesas,r8a7794-rst" (R-Car E2)
- "renesas,r8a7795-rst" (R-Car H3)
- "renesas,r8a7796-rst" (R-Car M3-W)
+ - "renesas,r8a77970-rst" (R-Car V3M)
- "renesas,r8a77995-rst" (R-Car D3)
- reg: Address start and address range for the device.
diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
new file mode 100644
index 0000000..32d8435
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
@@ -0,0 +1,33 @@
+Binding for the AXS10x reset controller
+
+This binding describes the ARC AXS10x boards custom IP-block which allows
+to control reset signals of selected peripherals. For example DW GMAC, etc...
+This block is controlled via memory-mapped register (AKA CREG) which
+represents up-to 32 reset lines.
+
+As of today only the following lines are used:
+ - DW GMAC - line 5
+
+This binding uses the common reset binding[1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
+Required properties:
+- compatible: should be "snps,axs10x-reset".
+- reg: should always contain pair address - length: for creg reset
+ bits register.
+- #reset-cells: from common reset binding; Should always be set to 1.
+
+Example:
+ reset: reset-controller@11220 {
+ compatible = "snps,axs10x-reset";
+ #reset-cells = <1>;
+ reg = <0x11220 0x4>;
+ };
+
+Specifying reset lines connected to IP modules:
+ ethernet@.... {
+ ....
+ resets = <&reset 5>;
+ ....
+ };
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index 68a6f48..93efed6 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -13,6 +13,7 @@ Required properties:
"socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
"socionext,uniphier-ld11-reset" - for LD11 SoC
"socionext,uniphier-ld20-reset" - for LD20 SoC
+ "socionext,uniphier-pxs3-reset" - for PXs3 SoC
- #reset-cells: should be 1.
Example:
@@ -44,6 +45,7 @@ Required properties:
"socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
"socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD)
"socionext,uniphier-ld20-sd-reset" - for LD20 SoC
+ "socionext,uniphier-pxs3-sd-reset" - for PXs3 SoC
- #reset-cells: should be 1.
Example:
@@ -74,6 +76,7 @@ Required properties:
"socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
"socionext,uniphier-ld11-peri-reset" - for LD11 SoC
"socionext,uniphier-ld20-peri-reset" - for LD20 SoC
+ "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC
- #reset-cells: should be 1.
Example:
diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt
index 47ac834..48eed14 100644
--- a/Documentation/devicetree/bindings/soc/fsl/bman.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt
@@ -65,8 +65,8 @@ to the respective BMan instance
BMan Private Memory Node
BMan requires a contiguous range of physical memory used for the backing store
-for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as a
-node under the /reserved-memory node
+for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as
+a node under the /reserved-memory node.
The BMan FBPR memory node must be named "bman-fbpr"
@@ -75,7 +75,9 @@ PROPERTIES
- compatible
Usage: required
Value type: <stringlist>
- Definition: Must inclide "fsl,bman-fbpr"
+ Definition: PPC platforms: Must include "fsl,bman-fbpr"
+ ARM platforms: Must include "shared-dma-pool"
+ as well as the "no-map" property
The following constraints are relevant to the FBPR private memory:
- The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to
@@ -100,10 +102,10 @@ The example below shows a BMan FBPR dynamic allocation memory node
ranges;
bman_fbpr: bman-fbpr {
- compatible = "fsl,bman-fbpr";
- alloc-ranges = <0 0 0x10 0>;
+ compatible = "shared-mem-pool";
size = <0 0x1000000>;
alignment = <0 0x1000000>;
+ no-map;
};
};
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt
index 556ebb8..ee96afd 100644
--- a/Documentation/devicetree/bindings/soc/fsl/qman.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt
@@ -60,6 +60,12 @@ are located at offsets 0xbf8 and 0xbfc
Value type: <prop-encoded-array>
Definition: Reference input clock. Its frequency is half of the
platform clock
+- memory-regions
+ Usage: Required for ARM
+ Value type: <phandle array>
+ Definition: List of phandles referencing the QMan private memory
+ nodes (described below). The qman-fqd node must be
+ first followed by qman-pfdr node. Only used on ARM
Devices connected to a QMan instance via Direct Connect Portals (DCP) must link
to the respective QMan instance
@@ -74,7 +80,9 @@ QMan Private Memory Nodes
QMan requires two contiguous range of physical memory used for the backing store
for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
-This memory is reserved/allocated as a nodes under the /reserved-memory node
+This memory is reserved/allocated as a node under the /reserved-memory node.
+
+For additional details about reserved memory regions see reserved-memory.txt
The QMan FQD memory node must be named "qman-fqd"
@@ -83,7 +91,9 @@ PROPERTIES
- compatible
Usage: required
Value type: <stringlist>
- Definition: Must inclide "fsl,qman-fqd"
+ Definition: PPC platforms: Must include "fsl,qman-fqd"
+ ARM platforms: Must include "shared-dma-pool"
+ as well as the "no-map" property
The QMan PFDR memory node must be named "qman-pfdr"
@@ -92,7 +102,9 @@ PROPERTIES
- compatible
Usage: required
Value type: <stringlist>
- Definition: Must inclide "fsl,qman-pfdr"
+ Definition: PPC platforms: Must include "fsl,qman-pfdr"
+ ARM platforms: Must include "shared-dma-pool"
+ as well as the "no-map" property
The following constraints are relevant to the FQD and PFDR private memory:
- The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
@@ -117,16 +129,16 @@ The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
ranges;
qman_fqd: qman-fqd {
- compatible = "fsl,qman-fqd";
- alloc-ranges = <0 0 0x10 0>;
+ compatible = "shared-dma-pool";
size = <0 0x400000>;
alignment = <0 0x400000>;
+ no-map;
};
qman_pfdr: qman-pfdr {
- compatible = "fsl,qman-pfdr";
- alloc-ranges = <0 0 0x10 0>;
+ compatible = "shared-dma-pool";
size = <0 0x2000000>;
alignment = <0 0x2000000>;
+ no-map;
};
};
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
index 107700d..bf80e3f 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
@@ -19,6 +19,7 @@ IP Pairing
Required properties in pwrap device node.
- compatible:
"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
+ "mediatek,mt7622-pwrap" for MT7622 SoCs
"mediatek,mt8135-pwrap" for MT8135 SoCs
"mediatek,mt8173-pwrap" for MT8173 SoCs
- interrupts: IRQ for pwrap in SOC
@@ -36,9 +37,12 @@ Required properties in pwrap device node.
- clocks: Must contain an entry for each entry in clock-names.
Optional properities:
-- pmic: Mediatek PMIC MFD is the child device of pwrap
+- pmic: Using either MediaTek PMIC MFD as the child device of pwrap
See the following for child node definitions:
Documentation/devicetree/bindings/mfd/mt6397.txt
+ or the regulator-only device as the child device of pwrap, such as MT6380.
+ See the following definitions for such kinds of devices.
+ Documentation/devicetree/bindings/regulator/mt6380-regulator.txt
Example:
pwrap: pwrap@1000f000 {
OpenPOWER on IntegriCloud