summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-07-24 14:05:46 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-07-24 14:05:46 -0700
commit914311c9fb9bc01a215de9d848b72b5449c0e342 (patch)
treee130f41c9c721bae03d6e293ffe0039d1a9018ea /Documentation
parent5dedb9f3bd5bcb186313ea0c0cff8f2c525d4122 (diff)
parent8b8b091bf07fa7ef7f13c1ac40b30bcf74050b60 (diff)
downloadop-kernel-dev-914311c9fb9bc01a215de9d848b72b5449c0e342.zip
op-kernel-dev-914311c9fb9bc01a215de9d848b72b5449c0e342.tar.gz
Merge tag 'pinctrl-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control changes from Linus Walleij: "These are the accumulated pin control patches for v3.6: - Various cleanups to the U300 driver - Refactor the pin control core to automatically remove any GPIO ranges when the drivers are removed, instead of having the drivers do this explicitly. - Add a function for registering a batch of GPIO ranges. - Fix a number of incorrect but non-regressive error checks. - Incremental improvements to the COH901, i.MX and Nomadik drivers - Add a one-register-per-pin entirely Device Tree-based pin control driver from Tony Lindgren." * tag 'pinctrl-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: Add one-register-per-pin type device tree based pinctrl driver pinctrl/nomadik: add spi2_oc1_2 pin group pinctrl/nomadik: kerneldoc fix pinctrl/nomadik: use devm_* allocators for gpio probe pinctrl/nomadik: add pin group to mco function pinctrl/nomadik: add hsit_a_2 pin group pinctrl/nomadik: add pin group smcs1 and smps0 pinctrl/nomadik: fix hsir_a_1_pins pin list pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL is set pinctrl/coh901: use clk_prepare_[en|dis]able() pinctrl/pinctrl-tegra: remove IS_ERR checking of pmx->pctl pinctrl/pinctrl-spear: remove IS_ERR checking of pmx->pctl pinctrl/u300: drop unused variable pinctrl: select the proper symbol pinctrl: add pinctrl_add_gpio_ranges function pinctrl: remove pinctrl_remove_gpio_range pinctrl/pinctrl-core: cleanup pinctrl_register pinctrl/u300: delete pointless debug print pinctrl/pinctrl-u300: remove devm_kfree at driver unload
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt93
1 files changed, 93 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
new file mode 100644
index 0000000..5187f0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
@@ -0,0 +1,93 @@
+One-register-per-pin type device tree based pinctrl driver
+
+Required properties:
+- compatible : "pinctrl-single"
+
+- reg : offset and length of the register set for the mux registers
+
+- pinctrl-single,register-width : pinmux register access width in bits
+
+- pinctrl-single,function-mask : mask of allowed pinmux function bits
+ in the pinmux register
+
+Optional properties:
+- pinctrl-single,function-off : function off mode for disabled state if
+ available and same for all registers; if not specified, disabling of
+ pin functions is ignored
+
+This driver assumes that there is only one register for each pin,
+and uses the common pinctrl bindings as specified in the pinctrl-bindings.txt
+document in this directory.
+
+The pin configuration nodes for pinctrl-single are specified as pinctrl
+register offset and value pairs using pinctrl-single,pins. Only the bits
+specified in pinctrl-single,function-mask are updated. For example, setting
+a pin for a device could be done with:
+
+ pinctrl-single,pins = <0xdc 0x118>;
+
+Where 0xdc is the offset from the pinctrl register base address for the
+device pinctrl register, and 0x118 contains the desired value of the
+pinctrl register. See the device example and static board pins example
+below for more information.
+
+Example:
+
+/* SoC common file */
+
+/* first controller instance for pins in core domain */
+pmx_core: pinmux@4a100040 {
+ compatible = "pinctrl-single";
+ reg = <0x4a100040 0x0196>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xffff>;
+};
+
+/* second controller instance for pins in wkup domain */
+pmx_wkup: pinmux@4a31e040 {
+ compatible = "pinctrl-single;
+ reg = <0x4a31e040 0x0038>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xffff>;
+};
+
+
+/* board specific .dts file */
+
+&pmx_core {
+
+ /*
+ * map all board specific static pins enabled by the pinctrl driver
+ * itself during the boot (or just set them up in the bootloader)
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&board_pins>;
+
+ board_pins: pinmux_board_pins {
+ pinctrl-single,pins = <
+ 0x6c 0xf
+ 0x6e 0xf
+ 0x70 0xf
+ 0x72 0xf
+ >;
+ };
+
+ /* map uart2 pins */
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ 0xd8 0x118
+ 0xda 0
+ 0xdc 0x118
+ 0xde 0
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
OpenPOWER on IntegriCloud