summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-03-03 08:48:58 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2010-03-03 08:48:58 -0800
commit7f5b09c15ab989ed5ce4adda0be42c1302df70b7 (patch)
tree9695b00983d1bd077ff91c463abcb136330cf344 /Documentation
parent94468080220162f74dc6ce5c3e95e5fec8022902 (diff)
parentcedf8a78421943441b9011ce7bcdab55f07d2ea6 (diff)
downloadop-kernel-dev-7f5b09c15ab989ed5ce4adda0be42c1302df70b7.zip
op-kernel-dev-7f5b09c15ab989ed5ce4adda0be42c1302df70b7.tar.gz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (220 commits) USB: backlight, appledisplay: fix incomplete registration failure handling USB: pl2303: remove unnecessary reset of usb_device in urbs USB: ftdi_sio: remove obsolete check in unthrottle USB: ftdi_sio: remove unused tx_bytes counter USB: qcaux: driver for auxiliary serial ports on Qualcomm devices USB: pl2303: initial TIOCGSERIAL support USB: option: add Longcheer/Longsung vendor ID USB: fix I2C API usage in ohci-pnx4008. USB: usbmon: mask seconds properly in text API USB: sisusbvga: no unnecessary GFP_ATOMIC USB: storage: onetouch: unnecessary GFP_ATOMIC USB: serial: ftdi: add CONTEC vendor and product id USB: remove references to port->port.count from the serial drivers USB: tty: Prune uses of tty_request_room in the USB layer USB: tty: Add a function to insert a string of characters with the same flag USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration() USB: tty: kill request_room for USB ACM class USB: tty: sort out the request_room handling for whiteheat USB: storage: fix misplaced parenthesis USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-usb11
-rw-r--r--Documentation/ioctl/ioctl-number.txt1
-rw-r--r--Documentation/networking/00-INDEX2
-rw-r--r--Documentation/networking/cxacru-cf.py48
-rw-r--r--Documentation/networking/cxacru.txt16
-rw-r--r--Documentation/usb/error-codes.txt6
-rw-r--r--Documentation/usb/power-management.txt235
7 files changed, 176 insertions, 143 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index a07c0f3..a986e9b 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -159,3 +159,14 @@ Description:
device. This is useful to ensure auto probing won't
match the driver to the device. For example:
# echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id
+
+What: /sys/bus/usb/device/.../avoid_reset
+Date: December 2009
+Contact: Oliver Neukum <oliver@neukum.org>
+Description:
+ Writing 1 to this file tells the kernel that this
+ device will morph into another mode when it is reset.
+ Drivers will not use reset for error handling for
+ such devices.
+Users:
+ usb_modeswitch
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 35cf64d..35c9b51 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -139,7 +139,6 @@ Code Seq#(hex) Include File Comments
'K' all linux/kd.h
'L' 00-1F linux/loop.h conflict!
'L' 10-1F drivers/scsi/mpt2sas/mpt2sas_ctl.h conflict!
-'L' 20-2F linux/usb/vstusb.h
'L' E0-FF linux/ppdd.h encrypted disk device driver
<http://linux01.gwdg.de/~alatham/ppdd.html>
'M' all linux/soundcard.h conflict!
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 50189bf..fe5c099 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -32,6 +32,8 @@ cs89x0.txt
- the Crystal LAN (CS8900/20-based) Ethernet ISA adapter driver
cxacru.txt
- Conexant AccessRunner USB ADSL Modem
+cxacru-cf.py
+ - Conexant AccessRunner USB ADSL Modem configuration file parser
de4x5.txt
- the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver
decnet.txt
diff --git a/Documentation/networking/cxacru-cf.py b/Documentation/networking/cxacru-cf.py
new file mode 100644
index 0000000..b41d298
--- /dev/null
+++ b/Documentation/networking/cxacru-cf.py
@@ -0,0 +1,48 @@
+#!/usr/bin/env python
+# Copyright 2009 Simon Arlott
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc., 59
+# Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# Usage: cxacru-cf.py < cxacru-cf.bin
+# Output: values string suitable for the sysfs adsl_config attribute
+#
+# Warning: cxacru-cf.bin with MD5 hash cdbac2689969d5ed5d4850f117702110
+# contains mis-aligned values which will stop the modem from being able
+# to make a connection. If the first and last two bytes are removed then
+# the values become valid, but the modulation will be forced to ANSI
+# T1.413 only which may not be appropriate.
+#
+# The original binary format is a packed list of le32 values.
+
+import sys
+import struct
+
+i = 0
+while True:
+ buf = sys.stdin.read(4)
+
+ if len(buf) == 0:
+ break
+ elif len(buf) != 4:
+ sys.stdout.write("\n")
+ sys.stderr.write("Error: read {0} not 4 bytes\n".format(len(buf)))
+ sys.exit(1)
+
+ if i > 0:
+ sys.stdout.write(" ")
+ sys.stdout.write("{0:x}={1}".format(i, struct.unpack("<I", buf)[0]))
+ i += 1
+
+sys.stdout.write("\n")
diff --git a/Documentation/networking/cxacru.txt b/Documentation/networking/cxacru.txt
index b074681..2cce044 100644
--- a/Documentation/networking/cxacru.txt
+++ b/Documentation/networking/cxacru.txt
@@ -4,6 +4,12 @@ While it is capable of managing/maintaining the ADSL connection without the
module loaded, the device will sometimes stop responding after unloading the
driver and it is necessary to unplug/remove power to the device to fix this.
+Note: support for cxacru-cf.bin has been removed. It was not loaded correctly
+so it had no effect on the device configuration. Fixing it could have stopped
+existing devices working when an invalid configuration is supplied.
+
+There is a script cxacru-cf.py to convert an existing file to the sysfs form.
+
Detected devices will appear as ATM devices named "cxacru". In /sys/class/atm/
these are directories named cxacruN where N is the device number. A symlink
named device points to the USB interface device's directory which contains
@@ -15,6 +21,15 @@ several sysfs attribute files for retrieving device statistics:
* adsl_headend_environment
Information about the remote headend.
+* adsl_config
+ Configuration writing interface.
+ Write parameters in hexadecimal format <index>=<value>,
+ separated by whitespace, e.g.:
+ "1=0 a=5"
+ Up to 7 parameters at a time will be sent and the modem will restart
+ the ADSL connection when any value is set. These are logged for future
+ reference.
+
* downstream_attenuation (dB)
* downstream_bits_per_frame
* downstream_rate (kbps)
@@ -61,6 +76,7 @@ several sysfs attribute files for retrieving device statistics:
* mac_address
* modulation
+ "" (when not connected)
"ANSI T1.413"
"ITU-T G.992.1 (G.DMT)"
"ITU-T G.992.2 (G.LITE)"
diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt
index 9cf83e8..d83703e 100644
--- a/Documentation/usb/error-codes.txt
+++ b/Documentation/usb/error-codes.txt
@@ -41,8 +41,8 @@ USB-specific:
-EFBIG Host controller driver can't schedule that many ISO frames.
--EPIPE Specified endpoint is stalled. For non-control endpoints,
- reset this status with usb_clear_halt().
+-EPIPE The pipe type specified in the URB doesn't match the
+ endpoint's actual type.
-EMSGSIZE (a) endpoint maxpacket size is zero; it is not usable
in the current interface altsetting.
@@ -60,6 +60,8 @@ USB-specific:
-EHOSTUNREACH URB was rejected because the device is suspended.
+-ENOEXEC A control URB doesn't contain a Setup packet.
+
**************************************************************************
* Error codes returned by in urb->status *
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index 3bf6818..2790ad4 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -2,7 +2,7 @@
Alan Stern <stern@rowland.harvard.edu>
- November 10, 2009
+ December 11, 2009
@@ -29,9 +29,9 @@ covered to some extent (see Documentation/power/*.txt for more
information about system PM).
Note: Dynamic PM support for USB is present only if the kernel was
-built with CONFIG_USB_SUSPEND enabled. System PM support is present
-only if the kernel was built with CONFIG_SUSPEND or CONFIG_HIBERNATION
-enabled.
+built with CONFIG_USB_SUSPEND enabled (which depends on
+CONFIG_PM_RUNTIME). System PM support is present only if the kernel
+was built with CONFIG_SUSPEND or CONFIG_HIBERNATION enabled.
What is Remote Wakeup?
@@ -229,6 +229,11 @@ necessary operations by hand or add them to a udev script. You can
also change the idle-delay time; 2 seconds is not the best choice for
every device.
+If a driver knows that its device has proper suspend/resume support,
+it can enable autosuspend all by itself. For example, the video
+driver for a laptop's webcam might do this, since these devices are
+rarely used and so should normally be autosuspended.
+
Sometimes it turns out that even when a device does work okay with
autosuspend there are still problems. For example, there are
experimental patches adding autosuspend support to the usbhid driver,
@@ -321,69 +326,81 @@ driver does so by calling these six functions:
void usb_autopm_get_interface_no_resume(struct usb_interface *intf);
void usb_autopm_put_interface_no_suspend(struct usb_interface *intf);
-The functions work by maintaining a counter in the usb_interface
-structure. When intf->pm_usage_count is > 0 then the interface is
-deemed to be busy, and the kernel will not autosuspend the interface's
-device. When intf->pm_usage_count is <= 0 then the interface is
-considered to be idle, and the kernel may autosuspend the device.
+The functions work by maintaining a usage counter in the
+usb_interface's embedded device structure. When the counter is > 0
+then the interface is deemed to be busy, and the kernel will not
+autosuspend the interface's device. When the usage counter is = 0
+then the interface is considered to be idle, and the kernel may
+autosuspend the device.
-(There is a similar pm_usage_count field in struct usb_device,
+(There is a similar usage counter field in struct usb_device,
associated with the device itself rather than any of its interfaces.
-This field is used only by the USB core.)
-
-Drivers must not modify intf->pm_usage_count directly; its value
-should be changed only be using the functions listed above. Drivers
-are responsible for insuring that the overall change to pm_usage_count
-during their lifetime balances out to 0 (it may be necessary for the
-disconnect method to call usb_autopm_put_interface() one or more times
-to fulfill this requirement). The first two routines use the PM mutex
-in struct usb_device for mutual exclusion; drivers using the async
-routines are responsible for their own synchronization and mutual
-exclusion.
-
- usb_autopm_get_interface() increments pm_usage_count and
- attempts an autoresume if the new value is > 0 and the
- device is suspended.
-
- usb_autopm_put_interface() decrements pm_usage_count and
- attempts an autosuspend if the new value is <= 0 and the
- device isn't suspended.
+This counter is used only by the USB core.)
+
+Drivers need not be concerned about balancing changes to the usage
+counter; the USB core will undo any remaining "get"s when a driver
+is unbound from its interface. As a corollary, drivers must not call
+any of the usb_autopm_* functions after their diconnect() routine has
+returned.
+
+Drivers using the async routines are responsible for their own
+synchronization and mutual exclusion.
+
+ usb_autopm_get_interface() increments the usage counter and
+ does an autoresume if the device is suspended. If the
+ autoresume fails, the counter is decremented back.
+
+ usb_autopm_put_interface() decrements the usage counter and
+ attempts an autosuspend if the new value is = 0.
usb_autopm_get_interface_async() and
usb_autopm_put_interface_async() do almost the same things as
- their non-async counterparts. The differences are: they do
- not acquire the PM mutex, and they use a workqueue to do their
+ their non-async counterparts. The big difference is that they
+ use a workqueue to do the resume or suspend part of their
jobs. As a result they can be called in an atomic context,
such as an URB's completion handler, but when they return the
- device will not generally not yet be in the desired state.
+ device will generally not yet be in the desired state.
usb_autopm_get_interface_no_resume() and
usb_autopm_put_interface_no_suspend() merely increment or
- decrement the pm_usage_count value; they do not attempt to
- carry out an autoresume or an autosuspend. Hence they can be
- called in an atomic context.
+ decrement the usage counter; they do not attempt to carry out
+ an autoresume or an autosuspend. Hence they can be called in
+ an atomic context.
-The conventional usage pattern is that a driver calls
+The simplest usage pattern is that a driver calls
usb_autopm_get_interface() in its open routine and
-usb_autopm_put_interface() in its close or release routine. But
-other patterns are possible.
+usb_autopm_put_interface() in its close or release routine. But other
+patterns are possible.
The autosuspend attempts mentioned above will often fail for one
reason or another. For example, the power/level attribute might be
set to "on", or another interface in the same device might not be
idle. This is perfectly normal. If the reason for failure was that
-the device hasn't been idle for long enough, a delayed workqueue
-routine is automatically set up to carry out the operation when the
-autosuspend idle-delay has expired.
+the device hasn't been idle for long enough, a timer is scheduled to
+carry out the operation automatically when the autosuspend idle-delay
+has expired.
Autoresume attempts also can fail, although failure would mean that
the device is no longer present or operating properly. Unlike
-autosuspend, there's no delay for an autoresume.
+autosuspend, there's no idle-delay for an autoresume.
Other parts of the driver interface
-----------------------------------
+Drivers can enable autosuspend for their devices by calling
+
+ usb_enable_autosuspend(struct usb_device *udev);
+
+in their probe() routine, if they know that the device is capable of
+suspending and resuming correctly. This is exactly equivalent to
+writing "auto" to the device's power/level attribute. Likewise,
+drivers can disable autosuspend by calling
+
+ usb_disable_autosuspend(struct usb_device *udev);
+
+This is exactly the same as writing "on" to the power/level attribute.
+
Sometimes a driver needs to make sure that remote wakeup is enabled
during autosuspend. For example, there's not much point
autosuspending a keyboard if the user can't cause the keyboard to do a
@@ -395,26 +412,27 @@ though, setting this flag won't cause the kernel to autoresume it.
Normally a driver would set this flag in its probe method, at which
time the device is guaranteed not to be autosuspended.)
-The synchronous usb_autopm_* routines have to run in a sleepable
-process context; they must not be called from an interrupt handler or
-while holding a spinlock. In fact, the entire autosuspend mechanism
-is not well geared toward interrupt-driven operation. However there
-is one thing a driver can do in an interrupt handler:
+If a driver does its I/O asynchronously in interrupt context, it
+should call usb_autopm_get_interface_async() before starting output and
+usb_autopm_put_interface_async() when the output queue drains. When
+it receives an input event, it should call
usb_mark_last_busy(struct usb_device *udev);
-This sets udev->last_busy to the current time. udev->last_busy is the
-field used for idle-delay calculations; updating it will cause any
-pending autosuspend to be moved back. The usb_autopm_* routines will
-also set the last_busy field to the current time.
-
-Calling urb_mark_last_busy() from within an URB completion handler is
-subject to races: The kernel may have just finished deciding the
-device has been idle for long enough but not yet gotten around to
-calling the driver's suspend method. The driver would have to be
-responsible for synchronizing its suspend method with its URB
-completion handler and causing the autosuspend to fail with -EBUSY if
-an URB had completed too recently.
+in the event handler. This sets udev->last_busy to the current time.
+udev->last_busy is the field used for idle-delay calculations;
+updating it will cause any pending autosuspend to be moved back. Most
+of the usb_autopm_* routines will also set the last_busy field to the
+current time.
+
+Asynchronous operation is always subject to races. For example, a
+driver may call one of the usb_autopm_*_interface_async() routines at
+a time when the core has just finished deciding the device has been
+idle for long enough but not yet gotten around to calling the driver's
+suspend method. The suspend method must be responsible for
+synchronizing with the output request routine and the URB completion
+handler; it should cause autosuspends to fail with -EBUSY if the
+driver needs to use the device.
External suspend calls should never be allowed to fail in this way,
only autosuspend calls. The driver can tell them apart by checking
@@ -422,75 +440,23 @@ the PM_EVENT_AUTO bit in the message.event argument to the suspend
method; this bit will be set for internal PM events (autosuspend) and
clear for external PM events.
-Many of the ingredients in the autosuspend framework are oriented
-towards interfaces: The usb_interface structure contains the
-pm_usage_cnt field, and the usb_autopm_* routines take an interface
-pointer as their argument. But somewhat confusingly, a few of the
-pieces (i.e., usb_mark_last_busy()) use the usb_device structure
-instead. Drivers need to keep this straight; they can call
-interface_to_usbdev() to find the device structure for a given
-interface.
-
- Locking requirements
- --------------------
+ Mutual exclusion
+ ----------------
-All three suspend/resume methods are always called while holding the
-usb_device's PM mutex. For external events -- but not necessarily for
-autosuspend or autoresume -- the device semaphore (udev->dev.sem) will
-also be held. This implies that external suspend/resume events are
-mutually exclusive with calls to probe, disconnect, pre_reset, and
-post_reset; the USB core guarantees that this is true of internal
-suspend/resume events as well.
+For external events -- but not necessarily for autosuspend or
+autoresume -- the device semaphore (udev->dev.sem) will be held when a
+suspend or resume method is called. This implies that external
+suspend/resume events are mutually exclusive with calls to probe,
+disconnect, pre_reset, and post_reset; the USB core guarantees that
+this is true of autosuspend/autoresume events as well.
If a driver wants to block all suspend/resume calls during some
-critical section, it can simply acquire udev->pm_mutex. Note that
-calls to resume may be triggered indirectly. Block IO due to memory
-allocations can make the vm subsystem resume a device. Thus while
-holding this lock you must not allocate memory with GFP_KERNEL or
-GFP_NOFS.
-
-Alternatively, if the critical section might call some of the
-usb_autopm_* routines, the driver can avoid deadlock by doing:
-
- down(&udev->dev.sem);
- rc = usb_autopm_get_interface(intf);
-
-and at the end of the critical section:
-
- if (!rc)
- usb_autopm_put_interface(intf);
- up(&udev->dev.sem);
-
-Holding the device semaphore will block all external PM calls, and the
-usb_autopm_get_interface() will prevent any internal PM calls, even if
-it fails. (Exercise: Why?)
-
-The rules for locking order are:
-
- Never acquire any device semaphore while holding any PM mutex.
-
- Never acquire udev->pm_mutex while holding the PM mutex for
- a device that isn't a descendant of udev.
-
-In other words, PM mutexes should only be acquired going up the device
-tree, and they should be acquired only after locking all the device
-semaphores you need to hold. These rules don't matter to drivers very
-much; they usually affect just the USB core.
-
-Still, drivers do need to be careful. For example, many drivers use a
-private mutex to synchronize their normal I/O activities with their
-disconnect method. Now if the driver supports autosuspend then it
-must call usb_autopm_put_interface() from somewhere -- maybe from its
-close method. It should make the call while holding the private mutex,
-since a driver shouldn't call any of the usb_autopm_* functions for an
-interface from which it has been unbound.
-
-But the usb_autpm_* routines always acquire the device's PM mutex, and
-consequently the locking order has to be: private mutex first, PM
-mutex second. Since the suspend method is always called with the PM
-mutex held, it mustn't try to acquire the private mutex. It has to
-synchronize with the driver's I/O activities in some other way.
+critical section, the best way is to lock the device and call
+usb_autopm_get_interface() (and do the reverse at the end of the
+critical section). Holding the device semaphore will block all
+external PM calls, and the usb_autopm_get_interface() will prevent any
+internal PM calls, even if it fails. (Exercise: Why?)
Interaction between dynamic PM and system PM
@@ -499,22 +465,11 @@ synchronize with the driver's I/O activities in some other way.
Dynamic power management and system power management can interact in
a couple of ways.
-Firstly, a device may already be manually suspended or autosuspended
-when a system suspend occurs. Since system suspends are supposed to
-be as transparent as possible, the device should remain suspended
-following the system resume. The 2.6.23 kernel obeys this principle
-for manually suspended devices but not for autosuspended devices; they
-do get resumed when the system wakes up. (Presumably they will be
-autosuspended again after their idle-delay time expires.) In later
-kernels this behavior will be fixed.
-
-(There is an exception. If a device would undergo a reset-resume
-instead of a normal resume, and the device is enabled for remote
-wakeup, then the reset-resume takes place even if the device was
-already suspended when the system suspend began. The justification is
-that a reset-resume is a kind of remote-wakeup event. Or to put it
-another way, a device which needs a reset won't be able to generate
-normal remote-wakeup signals, so it ought to be resumed immediately.)
+Firstly, a device may already be autosuspended when a system suspend
+occurs. Since system suspends are supposed to be as transparent as
+possible, the device should remain suspended following the system
+resume. But this theory may not work out well in practice; over time
+the kernel's behavior in this regard has changed.
Secondly, a dynamic power-management event may occur as a system
suspend is underway. The window for this is short, since system
OpenPOWER on IntegriCloud