Merge tag 'ib-mfd-iio-pwm-4.11' into test

Immutable branch between MFD, IIO and PWM due for the v4.11 merge window

Pulled into IIO to allow follow up series of triggered capture for the
STM32 ADCs.

4 files changed, 133 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
new file mode 100644
index 0000000..6534a60
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
@@ -0,0 +1,29 @@
+What:		/sys/bus/iio/devices/triggerX/master_mode_available
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the list possible master modes which are:
+		- "reset"     :	The UG bit from the TIMx_EGR register is used as trigger output (TRGO).
+		- "enable"    : The Counter Enable signal CNT_EN is used as trigger output.
+		- "update"    : The update event is selected as trigger output.
+				For instance a master timer can then be used as a prescaler for a slave timer.
+		- "compare_pulse" : The trigger output send a positive pulse when the CC1IF flag is to be set.
+		- "OC1REF"    : OC1REF signal is used as trigger output.
+		- "OC2REF"    : OC2REF signal is used as trigger output.
+		- "OC3REF"    : OC3REF signal is used as trigger output.
+		- "OC4REF"    : OC4REF signal is used as trigger output.
+
+What:		/sys/bus/iio/devices/triggerX/master_mode
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the current master modes.
+		Writing set the master mode
+
+What:		/sys/bus/iio/devices/triggerX/sampling_frequency
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the current sampling frequency.
+		Writing an value different of 0 set and start sampling.
+		Writing 0 stop sampling.
diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt
new file mode 100644
index 0000000..55a653d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt
@@ -0,0 +1,23 @@
+STMicroelectronics STM32 Timers IIO timer bindings
+
+Must be a sub-node of an STM32 Timers device tree node.
+See ../mfd/stm32-timers.txt for details about the parent node.
+
+Required parameters:
+- compatible:	Must be "st,stm32-timer-trigger".
+- reg:		Identify trigger hardware block.
+
+Example:
+	timers@40010000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "st,stm32-timers";
+		reg = <0x40010000 0x400>;
+		clocks = <&rcc 0 160>;
+		clock-names = "clk_int";
+
+		timer@0 {
+			compatible = "st,stm32-timer-trigger";
+			reg = <0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
new file mode 100644
index 0000000..bbd083f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
@@ -0,0 +1,46 @@
+STM32 Timers driver bindings
+
+This IP provides 3 types of timer along with PWM functionality:
+- advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable
+  prescaler, break input feature, PWM outputs and complementary PWM ouputs channels.
+- general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a
+  programmable prescaler and PWM outputs.
+- basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler.
+
+Required parameters:
+- compatible: must be "st,stm32-timers"
+
+- reg:			Physical base address and length of the controller's
+			registers.
+- clock-names:		Set to "int".
+- clocks: 		Phandle to the clock used by the timer module.
+			For Clk properties, please refer to ../clock/clock-bindings.txt
+
+Optional parameters:
+- resets:		Phandle to the parent reset controller.
+			See ../reset/st,stm32-rcc.txt
+
+Optional subnodes:
+- pwm:			See ../pwm/pwm-stm32.txt
+- timer:		See ../iio/timer/stm32-timer-trigger.txt
+
+Example:
+	timers@40010000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "st,stm32-timers";
+		reg = <0x40010000 0x400>;
+		clocks = <&rcc 0 160>;
+		clock-names = "clk_int";
+
+		pwm {
+			compatible = "st,stm32-pwm";
+			pinctrl-0	= <&pwm1_pins>;
+			pinctrl-names	= "default";
+		};
+
+		timer@0 {
+			compatible = "st,stm32-timer-trigger";
+			reg = <0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
new file mode 100644
index 0000000..6dd0403
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
@@ -0,0 +1,35 @@
+STMicroelectronics STM32 Timers PWM bindings
+
+Must be a sub-node of an STM32 Timers device tree node.
+See ../mfd/stm32-timers.txt for details about the parent node.
+
+Required parameters:
+- compatible:		Must be "st,stm32-pwm".
+- pinctrl-names: 	Set to "default".
+- pinctrl-0: 		List of phandles pointing to pin configuration nodes for PWM module.
+			For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
+
+Optional parameters:
+- st,breakinput:	One or two <index level filter> to describe break input configurations.
+			"index" indicates on which break input (0 or 1) the configuration
+			should be applied.
+			"level" gives the active level (0=low or 1=high) of the input signal
+			for this configuration.
+			"filter" gives the filtering value to be applied.
+
+Example:
+	timers@40010000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "st,stm32-timers";
+		reg = <0x40010000 0x400>;
+		clocks = <&rcc 0 160>;
+		clock-names = "clk_int";
+
+		pwm {
+			compatible = "st,stm32-pwm";
+			pinctrl-0	= <&pwm1_pins>;
+			pinctrl-names	= "default";
+			st,breakinput = <0 1 5>;
+		};
+	};