Merge branch 'i2c-mux-dt-3' of https://github.com/peda-r/i2c-mux into i2c/for-4.9

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

5 files changed, 125 insertions, 11 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
index 71191ff..248a155 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
@@ -44,8 +44,7 @@ Required properties:
 - our-claim-gpio: The GPIO that we use to claim the bus.
 - their-claim-gpios: The GPIOs that the other sides use to claim the bus.
   Note that some implementations may only support a single other master.
-- Standard I2C mux properties. See i2c-mux.txt in this directory.
-- Single I2C child bus node at reg 0. See i2c-mux.txt in this directory.
+- I2C arbitration bus node. See i2c-arb.txt in this directory.
 
 Optional properties:
 - slew-delay-us: microseconds to wait for a GPIO to go high. Default is 10 us.
@@ -63,8 +62,6 @@ Example:
 
 	i2c-arbitrator {
 		compatible = "i2c-arb-gpio-challenge";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		i2c-parent = <&{/i2c@12CA0000}>;
 
@@ -74,8 +71,7 @@ Example:
 		wait-retry-us = <3000>;
 		wait-free-us = <50000>;
 
-		i2c@0 {
-			reg = <0>;
+		i2c-arb {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb.txt b/Documentation/devicetree/bindings/i2c/i2c-arb.txt
new file mode 100644
index 0000000..59abf92
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb.txt
@@ -0,0 +1,35 @@
+Common i2c arbitration bus properties.
+
+- i2c-arb child node
+
+Required properties for the i2c-arb child node:
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties for i2c-arb child node:
+- Child nodes conforming to i2c bus binding
+
+
+Example :
+
+	/*
+	   An NXP pca9541 I2C bus master selector at address 0x74
+	   with a NXP pca8574 GPIO expander attached.
+	 */
+
+	arb@74 {
+		compatible = "nxp,pca9541";
+		reg = <0x74>;
+
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@38 {
+				compatible = "nxp,pca8574";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gate.txt b/Documentation/devicetree/bindings/i2c/i2c-gate.txt
new file mode 100644
index 0000000..1846d23
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-gate.txt
@@ -0,0 +1,41 @@
+An i2c gate is useful to e.g. reduce the digital noise for RF tuners connected
+to the i2c bus. Gates are similar to arbitrators in that you need to perform
+some kind of operation to access the i2c bus past the arbitrator/gate, but
+there are no competing masters to consider for gates and therefore there is
+no arbitration happening for gates.
+
+Common i2c gate properties.
+
+- i2c-gate child node
+
+Required properties for the i2c-gate child node:
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties for i2c-gate child node:
+- Child nodes conforming to i2c bus binding
+
+
+Example :
+
+	/*
+	   An Invensense mpu9150 at address 0x68 featuring an on-chip Asahi
+	   Kasei ak8975 compass behind a gate.
+	 */
+
+	mpu9150@68 {
+		compatible = "invensense,mpu9150";
+		reg = <0x68>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <18 1>;
+
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ax8975@c {
+				compatible = "ak,ak8975";
+				reg = <0x0c>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux.txt
index af84cce..212e677 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux.txt
@@ -2,19 +2,32 @@ Common i2c bus multiplexer/switch properties.
 
 An i2c bus multiplexer/switch will have several child busses that are
 numbered uniquely in a device dependent manner.  The nodes for an i2c bus
-multiplexer/switch will have one child node for each child
-bus.
+multiplexer/switch will have one child node for each child bus.
 
-Required properties:
+Optional properties:
+- #address-cells = <1>;
+   This property is required is the i2c-mux child node does not exist.
+
+- #size-cells = <0>;
+   This property is required is the i2c-mux child node does not exist.
+
+- i2c-mux
+   For i2c multiplexers/switches that have child nodes that are a mixture
+   of both i2c child busses and other child nodes, the 'i2c-mux' subnode
+   can be used for populating the i2c child busses.  If an 'i2c-mux'
+   subnode is present, only subnodes of this will be considered as i2c
+   child busses.
+
+Required properties for the i2c-mux child node:
 - #address-cells = <1>;
 - #size-cells = <0>;
 
-Required properties for child nodes:
+Required properties for i2c child bus nodes:
 - #address-cells = <1>;
 - #size-cells = <0>;
 - reg : The sub-bus number.
 
-Optional properties for child nodes:
+Optional properties for i2c child bus nodes:
 - Other properties specific to the multiplexer/switch hardware.
 - Child nodes conforming to i2c bus binding
 
diff --git a/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt b/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
new file mode 100644
index 0000000..0fbbc69
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
@@ -0,0 +1,29 @@
+* NXP PCA9541 I2C bus master selector
+
+Required Properties:
+
+  - compatible: Must be "nxp,pca9541"
+
+  - reg: The I2C address of the device.
+
+  The following required properties are defined externally:
+
+  - I2C arbitration bus node. See i2c-arb.txt in this directory.
+
+
+Example:
+
+	i2c-arbitrator@74 {
+		compatible = "nxp,pca9541";
+		reg = <0x74>;
+
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@54 {
+				compatible = "at,24c08";
+				reg = <0x54>;
+			};
+		};
+	};