summaryrefslogtreecommitdiffstats
path: root/Documentation/x86_64
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/x86_64
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/x86_64')
-rw-r--r--Documentation/x86_64/boot-options.txt180
-rw-r--r--Documentation/x86_64/mm.txt24
2 files changed, 204 insertions, 0 deletions
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
new file mode 100644
index 0000000..44b6eea
--- /dev/null
+++ b/Documentation/x86_64/boot-options.txt
@@ -0,0 +1,180 @@
+AMD64 specific boot options
+
+There are many others (usually documented in driver documentation), but
+only the AMD64 specific ones are listed here.
+
+Machine check
+
+ mce=off disable machine check
+
+ nomce (for compatibility with i386): same as mce=off
+
+ Everything else is in sysfs now.
+
+APICs
+
+ apic Use IO-APIC. Default
+
+ noapic Don't use the IO-APIC.
+
+ disableapic Don't use the local APIC
+
+ nolapic Don't use the local APIC (alias for i386 compatibility)
+
+ pirq=... See Documentation/i386/IO-APIC.txt
+
+ noapictimer Don't set up the APIC timer
+
+Early Console
+
+ syntax: earlyprintk=vga
+ earlyprintk=serial[,ttySn[,baudrate]]
+
+ The early console is useful when the kernel crashes before the
+ normal console is initialized. It is not enabled by
+ default because it has some cosmetic problems.
+ Append ,keep to not disable it when the real console takes over.
+ Only vga or serial at a time, not both.
+ Currently only ttyS0 and ttyS1 are supported.
+ Interaction with the standard serial driver is not very good.
+ The VGA output is eventually overwritten by the real console.
+
+Timing
+
+ notsc
+ Don't use the CPU time stamp counter to read the wall time.
+ This can be used to work around timing problems on multiprocessor systems
+ with not properly synchronized CPUs. Only useful with a SMP kernel
+
+ report_lost_ticks
+ Report when timer interrupts are lost because some code turned off
+ interrupts for too long.
+
+ nmi_watchdog=NUMBER[,panic]
+ NUMBER can be:
+ 0 don't use an NMI watchdog
+ 1 use the IO-APIC timer for the NMI watchdog
+ 2 use the local APIC for the NMI watchdog using a performance counter. Note
+ This will use one performance counter and the local APIC's performance
+ vector.
+ When panic is specified panic when an NMI watchdog timeout occurs.
+ This is useful when you use a panic=... timeout and need the box
+ quickly up again.
+
+ nohpet
+ Don't use the HPET timer.
+
+Idle loop
+
+ idle=poll
+ Don't do power saving in the idle loop using HLT, but poll for rescheduling
+ event. This will make the CPUs eat a lot more power, but may be useful
+ to get slightly better performance in multiprocessor benchmarks. It also
+ makes some profiling using performance counters more accurate.
+
+Rebooting
+
+ reboot=b[ios] | t[riple] | k[bd] [, [w]arm | [c]old]
+ bios Use the CPU reboto vector for warm reset
+ warm Don't set the cold reboot flag
+ cold Set the cold reboot flag
+ triple Force a triple fault (init)
+ kbd Use the keyboard controller. cold reset (default)
+
+ Using warm reset will be much faster especially on big memory
+ systems because the BIOS will not go through the memory check.
+ Disadvantage is that not all hardware will be completely reinitialized
+ on reboot so there may be boot problems on some systems.
+
+ reboot=force
+
+ Don't stop other CPUs on reboot. This can make reboot more reliable
+ in some cases.
+
+Non Executable Mappings
+
+ noexec=on|off
+
+ on Enable(default)
+ off Disable
+
+SMP
+
+ nosmp Only use a single CPU
+
+ maxcpus=NUMBER only use upto NUMBER CPUs
+
+ cpumask=MASK only use cpus with bits set in mask
+
+NUMA
+
+ numa=off Only set up a single NUMA node spanning all memory.
+
+ numa=noacpi Don't parse the SRAT table for NUMA setup
+
+ numa=fake=X Fake X nodes and ignore NUMA setup of the actual machine.
+
+ACPI
+
+ acpi=off Don't enable ACPI
+ acpi=ht Use ACPI boot table parsing, but don't enable ACPI
+ interpreter
+ acpi=force Force ACPI on (currently not needed)
+
+ acpi=strict Disable out of spec ACPI workarounds.
+
+ acpi_sci={edge,level,high,low} Set up ACPI SCI interrupt.
+
+ acpi=noirq Don't route interrupts
+
+PCI
+
+ pci=off Don't use PCI
+ pci=conf1 Use conf1 access.
+ pci=conf2 Use conf2 access.
+ pci=rom Assign ROMs.
+ pci=assign-busses Assign busses
+ pci=irqmask=MASK Set PCI interrupt mask to MASK
+ pci=lastbus=NUMBER Scan upto NUMBER busses, no matter what the mptable says.
+ pci=noacpi Don't use ACPI to set up PCI interrupt routing.
+
+IOMMU
+
+ iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]][,merge]
+ [,forcesac][,fullflush][,nomerge][,noaperture]
+ size set size of iommu (in bytes)
+ noagp don't initialize the AGP driver and use full aperture.
+ off don't use the IOMMU
+ leak turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on)
+ memaper[=order] allocate an own aperture over RAM with size 32MB^order.
+ noforce don't force IOMMU usage. Default.
+ force Force IOMMU.
+ merge Do SG merging. Implies force (experimental)
+ nomerge Don't do SG merging.
+ forcesac For SAC mode for masks <40bits (experimental)
+ fullflush Flush IOMMU on each allocation (default)
+ nofullflush Don't use IOMMU fullflush
+ allowed overwrite iommu off workarounds for specific chipsets.
+ soft Use software bounce buffering (default for Intel machines)
+ noaperture Don't touch the aperture for AGP.
+
+ swiotlb=pages[,force]
+
+ pages Prereserve that many 128K pages for the software IO bounce buffering.
+ force Force all IO through the software TLB.
+
+Debugging
+
+ oops=panic Always panic on oopses. Default is to just kill the process,
+ but there is a small probability of deadlocking the machine.
+ This will also cause panics on machine check exceptions.
+ Useful together with panic=30 to trigger a reboot.
+
+ kstack=N Print that many words from the kernel stack in oops dumps.
+
+Misc
+
+ noreplacement Don't replace instructions with more appropiate ones
+ for the CPU. This may be useful on asymmetric MP systems
+ where some CPU have less capabilities than the others.
+
diff --git a/Documentation/x86_64/mm.txt b/Documentation/x86_64/mm.txt
new file mode 100644
index 0000000..662b739
--- /dev/null
+++ b/Documentation/x86_64/mm.txt
@@ -0,0 +1,24 @@
+
+<previous description obsolete, deleted>
+
+Virtual memory map with 4 level page tables:
+
+0000000000000000 - 00007fffffffffff (=47bits) user space, different per mm
+hole caused by [48:63] sign extension
+ffff800000000000 - ffff80ffffffffff (=40bits) guard hole
+ffff810000000000 - ffffc0ffffffffff (=46bits) direct mapping of phys. memory
+ffffc10000000000 - ffffc1ffffffffff (=40bits) hole
+ffffc20000000000 - ffffe1ffffffffff (=45bits) vmalloc/ioremap space
+... unused hole ...
+ffffffff80000000 - ffffffff82800000 (=40MB) kernel text mapping, from phys 0
+... unused hole ...
+ffffffff88000000 - fffffffffff00000 (=1919MB) module mapping space
+
+vmalloc space is lazily synchronized into the different PML4 pages of
+the processes using the page fault handler, with init_level4_pgt as
+reference.
+
+Current X86-64 implementations only support 40 bit of address space,
+but we support upto 46bits. This expands into MBZ space in the page tables.
+
+-Andi Kleen, Jul 2004
OpenPOWER on IntegriCloud