summaryrefslogtreecommitdiffstats
path: root/Documentation/scsi/qla2xxx.revision.notes
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/scsi/qla2xxx.revision.notes
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/scsi/qla2xxx.revision.notes')
-rw-r--r--Documentation/scsi/qla2xxx.revision.notes457
1 files changed, 457 insertions, 0 deletions
diff --git a/Documentation/scsi/qla2xxx.revision.notes b/Documentation/scsi/qla2xxx.revision.notes
new file mode 100644
index 0000000..290cdaf
--- /dev/null
+++ b/Documentation/scsi/qla2xxx.revision.notes
@@ -0,0 +1,457 @@
+/*
+ * QLogic ISP2200 and ISP2300 Linux Driver Revision List File.
+ *
+ ********************************************************************
+ *
+ * Revision History
+ *
+ * Rev 8.00.00b8 December 5, 2003 AV
+ * - Instruct mid-layer to perform initial scan.
+ *
+ * Rev 8.00.00b7 December 5, 2003 AV
+ * - Resync with Linux Kernel 2.6.0-test11.
+ * - Add basic NVRAM parser (extras/qla_nvr).
+ *
+ * Rev 8.00.00b7-pre11 December 3, 2003 AV
+ * - Sanitize the scsi_qla_host structure:
+ * - Purge unused elements.
+ * - Reorganize high-priority members (cache coherency).
+ * - Add support for NVRAM access via a sysfs binary attribute:
+ * - Consolidate semaphore locking access.
+ * - Fix more PCI posting issues.
+ * - Add extras directory for dump/NVRAM tools.
+ * - Remove unused qla_vendor.c file.
+ *
+ * Rev 8.00.00b7-pre11 November 26, 2003 DG/AV
+ * - Merge several patches from Christoph Hellwig [hch@lst.de]:
+ * - in Linux 2.6 both pci and the scsi layer use the generic
+ * dma direction bits, use them directly instead of the scsi
+ * and pci variants and the (noop) conversion routines.
+ * - Fix _IOXX_BAD() usage for external IOCTL interface.
+ * - Use atomic construct for HA loop_state member.
+ * - Add generic model description text for HBA types.
+ *
+ * Rev 8.00.00b7-pre5 November 17, 2003 AV
+ * - Merge several patches from Christoph Hellwig [hch@lst.de]:
+ * - patch to split the driver into a common qla2xxx.ko and a
+ * qla2?00.ko for each HBA type - the latter modules are
+ * only very small wrappers, mostly for the firmware
+ * images, all the meat is in the common qla2xxx.ko.
+ * - make the failover code optional.
+ * - kill useless lock_kernel in dpc thread startup.
+ * - no need for modversions hacks in 2.6 (or 2.4).
+ * - kill qla2x00_register_with_Linux.
+ * - simplify EH code, cmd or it's hostdata can't be NULL, no
+ * need to search whether the host it's ours, the midlayer
+ * makes sure it won't call into a driver for some else
+ * host.
+ * - Merge several patches from Jes Sorensen
+ * [jes@wildopensource.com]:
+ * - Call qla2x00_config_dma_addressing() before performing
+ * any consistent allocations. This is required since the
+ * dma mask settings will affect the memory
+ * pci_alloc_consistent() will return.
+ * - Call pci_set_consistent_dma_mask() to allow for 64 bit
+ * consistent allocations, required on some platforms such
+ * as the SN2.
+ * - Wait 20 usecs (not sure how long is really necessary,
+ * but this seems safe) after setting CSR_ISP_SOFT_RESET in
+ * the ctrl_status register as the card doesn't respond to
+ * PCI reads while in reset state. This causes a machine
+ * check on some architectures.
+ * - Flush PCI writes before calling udelay() to ensure the
+ * write is not sitting idle in-flight for a while before
+ * hitting the hardware.
+ * - Include linux/vmalloc.h in qla_os.c since it uses
+ * vmalloc().
+ * - Use auto-negotiate link speed when using default
+ * parameters rather than NVRAM settings. Disable NVRAM
+ * reading on SN2 since it's not possible to execute the
+ * HBA's BIOS on an SN2. I suggest doing something similar
+ * for all architectures that do not provide x86 BIOS
+ * emulation.
+ * - Clean-up slab-cache allocations:
+ * - locking.
+ * - mempool allocations in case of low-memory situations.
+ * - Fallback to GA_NXT scan if GID_PT call returns more than
+ * MAX_FIBRE_DEVICES.
+ * - Preserve iterating port ID across GA_NXT calls in
+ * qla2x00_find_all_fabric_devs().
+ * - Pre-calculate ASCII firmware dump length as to not incur the
+ * cost-to-calculate at each invocation of a read().
+ *
+ * Rev 8.00.00b6 November 4, 2003 AV
+ * - Add new 2300 TPX firmware (3.02.18).
+ *
+ * Rev 8.00.00b6-pre25 October 20, 2003 RA/AV
+ * - Resync with Linux Kernel 2.6.0-test9.
+ * - Rework firmware dump process:
+ * - Use binary attribute within sysfs tree.
+ * - Add user-space tool (gdump.sh) to retrieve formatted
+ * buffer.
+ * - Add ISP2100 support.
+ * - Use a slab cache for SRB allocations to reduce memory
+ * pressure.
+ * - Initial conversion of driver logging methods to a new
+ * qla_printk() function which uses dev_printk (Daniel
+ * Stekloff, IBM).
+ * - Further reduce stack usage in qla2x00_configure_local_loop()
+ * and qla2x00_find_all_fabric_devs().
+ * - Separate port state used for routing of I/O's from port
+ * mgmt-login retry etc.
+ *
+ * Rev 8.00.00b6-pre19 October 13, 2003 AV
+ * - Resync with Linux Kernel 2.6.0-test7-bk5.
+ * - Add intelligent RSCN event handling:
+ * - reduce scan time during 'port' RSCN events by only
+ * querying specified port ids.
+ * - Available on ISP23xx cards only.
+ * - Increase maximum number of recognizable targets from 256
+ * to 512.
+ * - Backend changes were previously added to support TPX
+ * (2K logins) firmware. Mid-layer can now scan for targets
+ * (H, B, T, L) where 512 < T >= 0.
+ * - Remove IP support from driver.
+ * - Switch firmware types from IP->TP for ISP22xx and
+ * IPX->TPX for ISP23xx cards.
+ * - Remove files qla_ip.[ch].
+ * - Remove type designations from firmware filenames.
+ *
+ * Rev 8.00.00b6-pre11 September 15, 2003 DG/AV
+ * - Resync with 6.06.00.
+ * - Resync with Linux Kernel 2.6.0-test5-bk3.
+ * - Add new 2300 IPX firmware (3.02.15).
+ *
+ * Rev 8.00.00b5 July 31, 2003 AV
+ * - Always create an fc_lun_t entry for lun 0 - as the mid-
+ * layer requires access to this lun for discovery to occur.
+ * - General sanitizing:
+ * - Add generic firmware option definitions.
+ * - Generalize retrieval/update of firmware options.
+ * - Fix compile errors which occur with extended debug.
+ * - Handle failure cases for scsi_add_host() and
+ * down_interruptible().
+ * - Host template updates:
+ * - Use standard bios_param callback function.
+ * - Disable clustering.
+ * - Remove unchecked_is_dma entry.
+ *
+ * Rev 8.00.00b5-pre5 July 29, 2003 DG/AV
+ * - Resync with 6.06.00b13.
+ * - Resync with Linux Kernel 2.6.0-test2.
+ * - Pass the complete loop_id, not the masked (0xff) value
+ * while issuing mailbox commands (qla_mbx.c/qla_fo.c/
+ * qla_iocb.c/qla_init.c).
+ * - Properly handle zero-length return status for an RLC CDB.
+ * - Create an fclun_t structure for 'disconnected' luns,
+ * peripheral-qualifier of 001b.
+ * - Remove unused LIP-sequence register access during AE 8010.
+ * - Generalize qla2x00_mark_device_lost() to handle forced
+ * login request -- modify all direct/indirect invocations
+ * with proper flag.
+ * - Save RSCN notification (AE 8015h) data in a proper and
+ * consistent format (domain, area, al_pa).
+ * - General sanitizing:
+ * - scsi_qla_host structure member reordering for cache-line
+ * coherency.
+ * - Remove unused SCSI opcodes, endian-swap definitions.
+ * - Remove CMD_* pre-processor defines.
+ * - Remove unused SCSIFCHOTSWAP/GAMAP/MULTIHOST codes.
+ * - Backout patch which added a per-scsi_qla_host scsi host
+ * spinlock, since mid-layer already defines one.
+ * - Add new 2300 IPX firmware (3.02.15).
+ *
+ * Rev 8.00.00b4 July 14, 2003 RA/DG/AV
+ * - Resync with 6.06.00b12.
+ * - Resync with Linux Kernel 2.6.0-test1.
+ * - Remove IOCB throttling code -- originally #if'd.
+ * - Remove apidev_*() routines since proc_mknod() has been
+ * removed -- need alternate IOCTL interface.
+ * - Merge several performance/fix patches from Arjan van de
+ * Ven:
+ * - Undefined operation >> 32.
+ * - No need to acquire mid-layer lock during command
+ * callback.
+ * - Use a per-HBA mid-layer lock.
+ * - Use a non-locked cycle for setting the count of the
+ * newly allocated sp (qla2x00_get_new_sp()).
+ * - Modify semantic behavior of qla2x00_queuecommand():
+ * - Reduce cacheline bouncing by having I/Os submitted
+ * by the IRQ handler.
+ * - Remove extraneous calls to qla2x00_next() during I/O
+ * queuing.
+ * - Use list_splice_init() during qla2x00_done() handling
+ * of commands to reduce list_lock contention.
+ * - RIO mode support for ISP2200:
+ * - Implementation differs slightly from original patch.
+ * - Do not use bottom-half handler (tasklet/work queue)
+ * for qla2x00_done() processing.
+ *
+ * Rev 8.00.00b4-pre22 July 12, 2003 AV
+ * - Check for 'Process Response Queue' requests early during
+ * the Host Status check.
+ * - General sanitizing:
+ * - srb_t structure rewrite, removal of unused members.
+ * - Remove unused fcdev array, fabricid, and PORT_*
+ * definitions.
+ * - Remove unused config_reg_t PCI definitions.
+ * - Add new 2200 IP firmware (2.02.06).
+ * - Add new 2300 IPX firmware (3.02.14).
+ *
+ * Rev 8.00.00b4-pre19 June 30, 2003 AV
+ * - Resync with Linux Kernel 2.5.73-bk8.
+ * - Rework IOCB command queuing methods:
+ * - Upper-layer driver *MUST* properly set the direction
+ * bit of SCSI commands.
+ * - Generalize 32bit/64bit queuing path functions.
+ * - Remove costly page-boundary cross check when using
+ * 64bit address capable IOCBs.
+ *
+ * Rev 8.00.00b4-pre15 June 19, 2003 AV
+ * - Resync with 6.06.00b11.
+ * - Continue fcport list consolidation work:
+ * - Updated IOCTL implementations to use new fcports
+ * list.
+ * - Modified product ID check to not verify ISP chip
+ * revision -- ISP2312 v3 (qla2x00_chip_diag()).
+ * - Add new 2300 IPX firmware (3.02.13):
+ *
+ * Rev 8.00.00b4-pre13 June 19, 2003 AV
+ * - Fix build process for qla2100 driver -- no support
+ * for IP.
+ * - SCSI host template modifications:
+ * - Set sg_tablesize based on the derived DMA mask.
+ * - Increase max_sectors since only limit within RISC
+ * is transfer of (((2^32) - 1) >> 9) sectors.
+ *
+ * Rev 8.00.00b4-pre12 June 18, 2003 RA, DG, RL, AV
+ * - Resync with 6.06.00b10.
+ * - Resync with Linux Kernel 2.5.72.
+ * - Initial fcport list consolidation work:
+ * - fcports/fcinitiators/fcdev/fc_ip --> ha->fcports
+ * list.
+ *
+ * Rev 8.00.00b4-pre7 June 05, 2003 AV
+ * - Properly release PCI resouces in init-failure case.
+ * - Reconcile disparite function return code definitions.
+ *
+ * Rev 8.00.00b4-pre4 June 03, 2003 AV
+ * - Resync with Linux Kernel 2.5.70-bk8:
+ * - SHT proc_info() changes.
+ * - Restructure SNS Generic Services routines:
+ * - Add qla_gs.c file to driver distribution.
+ * - Configure PCI latency timer for ISP23xx.
+ *
+ * Rev 8.00.00b4-pre3 June 02, 2003 RA, DG, RL, AV
+ * - Resync with 6.06.00b5.
+ * - Rework (again) PCI I/O space configuration
+ * (Anton Blanchard):
+ * - Use pci_set_mwi() routine;
+ * - Remove uneeded qla2x00_set_cache_line() function.
+ * - Remove extraneous modification of PCI_COMMAND word.
+ *
+ * Rev 8.00.00b3 May 29, 2003 AV
+ * - Resync with Linux Kernel 2.5.70.
+ * - Move RISC paused check from ISR fast-path.
+ *
+ * Rev 8.00.00b3-pre8 May 26, 2003 AV
+ * - Add new 2300 IPX firmware (3.02.12):
+ * - Rework PCI I/O space configuration.
+ *
+ * Rev 8.00.00b3-pre6 May 22, 2003 RA, DG, RL, AV
+ * - Resync with 6.06.00b3.
+ *
+ * Rev 8.00.00b3-pre4 May 21 2003 AV
+ * - Add new 2300 IPX firmware (3.02.11):
+ * - Remove 2300 TPX firmware from distribution.
+ *
+ * Rev 8.00.00b3-pre3 May 21 2003 AV
+ * - Properly setup PCI configuation space during
+ * initialization:
+ * - Properly configure Memory-Mapped I/O during early
+ * configuration stage.
+ * - Rework IP functionality to support 2k logins.
+ * - Add new 2300 IPX firmware (3.02.11):
+ * - Remove 2300 TPX firmware from distribution.
+ *
+ * Rev 8.00.00b3-pre2 May ??, 2003 RA, DG, RL, AV
+ * - Resync with 6.06.00b1.
+ *
+ * Rev 8.00.00b3-pre1 May ??, 2003 RA, DG, RL, AV
+ * - Resync with 6.05.00.
+ *
+ * Rev 8.00.00b2 May 19, 2003 AV
+ * - Simplify dma_addr_t handling during command queuing given
+ * new block-layer defined restrictions:
+ * - Physical addresses not spanning 4GB boundaries.
+ * - Firmware versions: 2100 TP (1.19.24), 2200 IP (2.02.05),
+ * 2300 TPX (3.02.10).
+ *
+ * Rev 8.00.00b2-pre1 May 13, 2003 AV
+ * - Add support for new 'Hotplug initialization' model.
+ * - Simplify host template by removing unused callbacks.
+ * - Use scsicam facilities to determine geometry.
+ * - Fix compilation issues for non-ISP23xx builds:
+ * - Correct register references in qla_dbg.c.
+ * - Correct Makefile build process.
+ *
+ * Rev 8.00.00b1 May 05, 2003 AV
+ * - Resync with Linux Kernel 2.5.69.
+ * - Firmware versions: 2100 TP (1.19.24), 2200 TP (2.02.05),
+ * 2300 TPX (3.02.10).
+ *
+ * Rev 8.00.00b1-pre45 April ??, 2003 AV
+ * - Resync with Linux Kernel 2.5.68-bk11:
+ * - Fix improper return-code assignment during fabric
+ * discovery.
+ * - Remove additional extraneous #defines from
+ * qla_settings.h.
+ * - USE_PORTNAME -- FO will always use portname.
+ * - Default queue depth size set to 64.
+ *
+ * Rev 8.00.00b1-pre42 April ??, 2003 AV
+ * - Convert bottom-half tasklet to a work_queue.
+ * - Initial basic coding of dynamic queue depth handling
+ * during QUEUE FULL statuses.
+ * - Fix mailbox interface problem with
+ * qla2x00_get_retry_cnt().
+ *
+ * Rev 8.00.00b1-pre41 April ??, 2003 AV
+ * - Convert build defines qla2[1|2|3]00 macros to
+ * qla2[1|2|3]xx due to module name stringification clashes.
+ * - Add additional ISP2322 checks during board configuration.
+ *
+ * Rev 8.00.00b1-pre40 April ??, 2003 AV
+ * - Resync with Linux Kernel 2.5.68-bk8:
+ * - Updated IRQ handler interface.
+ * - Add ISP dump code (stub) in case of SYSTEM_ERROR on
+ * ISP2100.
+ * - Add new 2200 IP firmware (2.02.05).
+ *
+ * Rev 8.00.00b1-pre39 April ??, 2003 AV
+ * - Resync with Linux Kernel 2.5.68.
+ * - Add simple build.sh script to aid in external compilation.
+ * - Clean-break with Kernel 2.4 compatibility.
+ * - Rework DPC routine -- completion routines for signaling.
+ * - Re-add HBAAPI character device node for IOCTL support.
+ * - Remove residual QLA2X_PERFORMANCE defines.
+ * - Allocate SP pool via __get_free_pages() rather than
+ * individual kmalloc()'s.
+ * - Inform SCSI mid-layer of 16-byte CDB support
+ * (host->max_cmd_len):
+ * - Remove unecessary 'more_cdb' handling code from
+ * qla_iocb.c and qla_xioct.c.
+ * - Reduce duplicate code in fabric scanning logic (MS IOCB
+ * preparation).
+ * - Add ISP dump code in case of SYSTEM_ERROR.
+ * - Remove 2300 VIX firmware from distribution:
+ * - Add initial code for IPX support.
+ * - Add new 2300 TPX firmware (3.02.10).
+ *
+ * Rev 8.00.00b1-pre34 April ??, 2003 AV
+ * - Resync with Linux Kernel 2.5.67.
+ * - Use domain/area/al_pa fields when displaying PortID
+ * values -- addresses endianess issues.
+ * - Rework large case statement to check 'common' CDB commands
+ * early in qla2x00_get_cmd_direction().
+ *
+ * Rev 8.00.00b1-pre31 April ??, 2003 AV
+ * - Update makefile to support PPC64 build.
+ * - Retool NVRAM configuration routine and structures:
+ * - Consoldate ISP21xx/ISP22xx/ISP23xx configuration
+ * (struct nvram_t).
+ * - Remove big/little endian support structures in favor of
+ * simplified bit-operations within byte fields.
+ * - Fix long-standing 'static' buffer sharing problem in
+ * qla2x00_configure_fabric().
+ *
+ * Rev 8.00.00b1-pre30 April ??, 2003 AV
+ * - Complete implementation of GID_PT scan.
+ * - Use consistent MS IOCB invocation method to query SNS:
+ * - Add RNN_ID and RSNN_NN registrations in a fabric.
+ * - Remove unused Mailbox Command 6Eh (Send SNS) support
+ * structures.
+ * - Use 64bit safe IOCBs while issuing INQUIRY and RLC during
+ * topology scan.
+ * - Until reimplementation of fcdev_t/fcport list
+ * consolidation, valid loop_id ranges are still limited from
+ * 0x00 through 0xFF -- enforce this within the code.
+ *
+ * Rev 8.00.00b1-pre27 March ??, 2003 AV
+ * - Resync with 6.05.00b9.
+ * - Retool HBA PCI configuration -- qla2x00_pci_config().
+ * - Remove inconsistent use of delay routines (UDELAY/SYS*).
+ * - Continue to teardown/clean/add comments and debug
+ * routines.
+ * - Properly swap bytes of the device's nodename in
+ * qla2x00_configure_local_loop().
+ *
+ * Rev 8.00.00b1-pre25 March ??, 2003 AV
+ * - Resync with 6.05.00b8.
+ *
+ * Rev 8.00.00b1-pre23 March ??, 2003 AV
+ * - Remove (#define) IOCB usage throttling.
+ * - Abstract interrupt polling with qla2x00_poll().
+ * - Modify lun scanning logic:
+ * - If the device does not support the SCSI Report Luns
+ * command, the driver will now only scan from 0 to the
+ * max#-luns as defined in the NVRAM (BIOS), rather than
+ * blindly scanning from 0 to 255 -- which could result in
+ * an increase in startup time when running against slow
+ * (JBOD) devices.
+ * - Rework reset logic in qla2x00_reset_chip() (spec).
+ *
+ * Rev 8.00.00b1-pre22 March ??, 2003 AV
+ * - Resync with 6.05.00b7.
+ * - Cleanup (rewrite) ISR handler.
+ * - Rename kmem_zalloc --> qla2x00_kmem_zalloc():
+ * - This function will eventually be removed.
+ * - Add new 2300 VIX firmware (3.02.09):
+ * - Support for Tape, Fabric, 2K logins, IP, and VI.
+ *
+ * Rev 8.00.00b1-pre18 March ??, 2003 AV
+ * - Support 232x type ISPs.
+ * - Support single firmware for each ISP type:
+ * - Restructure brd_info/fw_info methods.
+ * - Streamline firmware load process.
+ * - Properly query firmware for version information.
+ * - Remove extraneous scsi_qla_host members:
+ * - device_id ==> pdev->device
+ * - Fix fc4 features (RFF_ID) registration.
+ * - Convert kmem_zalloc --> qla2x00_kmem_zalloc().
+ * - Remove unused/extraneous #defines (USE_PORTNAME).
+ *
+ * Rev 8.00.00b1-pre14 March ??, 2003 AV
+ * - Resync with 6.05.00b6.
+ * - Initial source-code restructuring effort.
+ * - Build procedure.
+ * - Source file layout -- intuitive component layout.
+ * - Remove unused #defines (*PERFORMANCE, WORD_FW_LOAD, etc).
+ * - Add support for 2K logins (TPX -- firmware).
+ * - Add module parameter ql2xsuspendcount.
+ * - Add new 2200 IP/TP firmware (2.02.04).
+ *
+ * Rev 8.00.00b1-pre9 March ??, 2003 RL/DG/RA/AV
+ * - Use kernel struct list_head for fcport and fclun lists.
+ * - Remove extraneous (L|M)S_64BITS() and QL21_64*() defines.
+ *
+ * Rev 8.00.00b1-pre8 February 28, 2003 RL/DG/RA/AV
+ * - Resync with 6.05.00b3.
+ *
+ * Rev 8.00.00b1-pre7 February 23, 2003 RL/DG/RA/AV
+ * - Add alternate fabric scanning logic (GID_PT/GNN_ID/GPN_ID).
+ * - Remove use of deprecated function check_region().
+ * - Add new 2300 IP/TP firmware (3.02.08).
+ *
+ * Rev 8.00.00b1-pre5 January 28, 2003 RL/DG/RA/AV
+ * - Resync with 6.05.00b3.
+ * - Consolidate device_reg structure definitions for ISP types.
+ * - Add support for new queue-depth selection.
+ * - Add new 2300 IP/TP firmware (3.02.07).
+ *
+ * Rev 8.00.00b1-pre1 January 17, 2003 AV
+ * - Initial branch from 6.04.00b8 driver.
+ * - Remove VMWARE specific code.
+ * - Add support for pci_driver interface.
+ *
+ ********************************************************************/
OpenPOWER on IntegriCloud