Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	drivers/firmware/iscsi_ibft.c

3 files changed, 211 insertions, 0 deletions

diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt
new file mode 100644
index 0000000..8832e87
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt
@@ -0,0 +1,70 @@
+MPC5121 PSC Device Tree Bindings
+
+PSC in UART mode
+----------------
+
+For PSC in UART mode the needed PSC serial devices
+are specified by fsl,mpc5121-psc-uart nodes in the
+fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
+Controller node fsl,mpc5121-psc-fifo is requered there:
+
+fsl,mpc5121-psc-uart nodes
+--------------------------
+
+Required properties :
+ - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
+ - cell-index : Index of the PSC in hardware
+ - reg : Offset and length of the register set for the PSC device
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+Recommended properties :
+ - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
+ - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
+
+
+fsl,mpc5121-psc-fifo node
+-------------------------
+
+Required properties :
+ - compatible : Should be "fsl,mpc5121-psc-fifo"
+ - reg : Offset and length of the register set for the PSC
+         FIFO Controller
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+
+Example for a board using PSC0 and PSC1 devices in serial mode:
+
+serial@11000 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <0>;
+	reg = <0x11000 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+serial@11100 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <1>;
+	reg = <0x11100 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+pscfifo@11f00 {
+	compatible = "fsl,mpc5121-psc-fifo";
+	reg = <0x11f00 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+};
diff --git a/Documentation/powerpc/dts-bindings/fsl/spi.txt b/Documentation/powerpc/dts-bindings/fsl/spi.txt
index e7d9a34..80510c0 100644
--- a/Documentation/powerpc/dts-bindings/fsl/spi.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/spi.txt
@@ -13,6 +13,11 @@ Required properties:
 - interrupt-parent : the phandle for the interrupt controller that
   services interrupts for this device.
 
+Optional properties:
+- gpios : specifies the gpio pins to be used for chipselects.
+  The gpios will be referred to as reg = <index> in the SPI child nodes.
+  If unspecified, a single SPI device without a chip select can be used.
+
 Example:
 	spi@4c0 {
 		cell-index = <0>;
@@ -21,4 +26,6 @@ Example:
 		interrupts = <82 0>;
 		interrupt-parent = <700>;
 		mode = "cpu";
+		gpios = <&gpio 18 1	// device reg=<0>
+			 &gpio 19 1>;	// device reg=<1>
 	};
diff --git a/Documentation/powerpc/ptrace.txt b/Documentation/powerpc/ptrace.txt
new file mode 100644
index 0000000..f4a5499
--- /dev/null
+++ b/Documentation/powerpc/ptrace.txt
@@ -0,0 +1,134 @@
+GDB intends to support the following hardware debug features of BookE
+processors:
+
+4 hardware breakpoints (IAC)
+2 hardware watchpoints (read, write and read-write) (DAC)
+2 value conditions for the hardware watchpoints (DVC)
+
+For that, we need to extend ptrace so that GDB can query and set these
+resources. Since we're extending, we're trying to create an interface
+that's extendable and that covers both BookE and server processors, so
+that GDB doesn't need to special-case each of them. We added the
+following 3 new ptrace requests.
+
+1. PTRACE_PPC_GETHWDEBUGINFO
+
+Query for GDB to discover the hardware debug features. The main info to
+be returned here is the minimum alignment for the hardware watchpoints.
+BookE processors don't have restrictions here, but server processors have
+an 8-byte alignment restriction for hardware watchpoints. We'd like to avoid
+adding special cases to GDB based on what it sees in AUXV.
+
+Since we're at it, we added other useful info that the kernel can return to
+GDB: this query will return the number of hardware breakpoints, hardware
+watchpoints and whether it supports a range of addresses and a condition.
+The query will fill the following structure provided by the requesting process:
+
+struct ppc_debug_info {
+       unit32_t version;
+       unit32_t num_instruction_bps;
+       unit32_t num_data_bps;
+       unit32_t num_condition_regs;
+       unit32_t data_bp_alignment;
+       unit32_t sizeof_condition; /* size of the DVC register */
+       uint64_t features; /* bitmask of the individual flags */
+};
+
+features will have bits indicating whether there is support for:
+
+#define PPC_DEBUG_FEATURE_INSN_BP_RANGE		0x1
+#define PPC_DEBUG_FEATURE_INSN_BP_MASK		0x2
+#define PPC_DEBUG_FEATURE_DATA_BP_RANGE		0x4
+#define PPC_DEBUG_FEATURE_DATA_BP_MASK		0x8
+
+2. PTRACE_SETHWDEBUG
+
+Sets a hardware breakpoint or watchpoint, according to the provided structure:
+
+struct ppc_hw_breakpoint {
+        uint32_t version;
+#define PPC_BREAKPOINT_TRIGGER_EXECUTE  0x1
+#define PPC_BREAKPOINT_TRIGGER_READ     0x2
+#define PPC_BREAKPOINT_TRIGGER_WRITE    0x4
+        uint32_t trigger_type;       /* only some combinations allowed */
+#define PPC_BREAKPOINT_MODE_EXACT               0x0
+#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE     0x1
+#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE     0x2
+#define PPC_BREAKPOINT_MODE_MASK                0x3
+        uint32_t addr_mode;          /* address match mode */
+
+#define PPC_BREAKPOINT_CONDITION_MODE   0x3
+#define PPC_BREAKPOINT_CONDITION_NONE   0x0
+#define PPC_BREAKPOINT_CONDITION_AND    0x1
+#define PPC_BREAKPOINT_CONDITION_EXACT  0x1	/* different name for the same thing as above */
+#define PPC_BREAKPOINT_CONDITION_OR     0x2
+#define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
+#define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000	/* byte enable bits */
+#define PPC_BREAKPOINT_CONDITION_BE(n)  (1<<((n)+16))
+        uint32_t condition_mode;     /* break/watchpoint condition flags */
+
+        uint64_t addr;
+        uint64_t addr2;
+        uint64_t condition_value;
+};
+
+A request specifies one event, not necessarily just one register to be set.
+For instance, if the request is for a watchpoint with a condition, both the
+DAC and DVC registers will be set in the same request.
+
+With this GDB can ask for all kinds of hardware breakpoints and watchpoints
+that the BookE supports. COMEFROM breakpoints available in server processors
+are not contemplated, but that is out of the scope of this work.
+
+ptrace will return an integer (handle) uniquely identifying the breakpoint or
+watchpoint just created. This integer will be used in the PTRACE_DELHWDEBUG
+request to ask for its removal. Return -ENOSPC if the requested breakpoint
+can't be allocated on the registers.
+
+Some examples of using the structure to:
+
+- set a breakpoint in the first breakpoint register
+
+  p.version         = PPC_DEBUG_CURRENT_VERSION;
+  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+  p.addr            = (uint64_t) address;
+  p.addr2           = 0;
+  p.condition_value = 0;
+
+- set a watchpoint which triggers on reads in the second watchpoint register
+
+  p.version         = PPC_DEBUG_CURRENT_VERSION;
+  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
+  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+  p.addr            = (uint64_t) address;
+  p.addr2           = 0;
+  p.condition_value = 0;
+
+- set a watchpoint which triggers only with a specific value
+
+  p.version         = PPC_DEBUG_CURRENT_VERSION;
+  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_READ;
+  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+  p.condition_mode  = PPC_BREAKPOINT_CONDITION_AND | PPC_BREAKPOINT_CONDITION_BE_ALL;
+  p.addr            = (uint64_t) address;
+  p.addr2           = 0;
+  p.condition_value = (uint64_t) condition;
+
+- set a ranged hardware breakpoint
+
+  p.version         = PPC_DEBUG_CURRENT_VERSION;
+  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+  p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+  p.addr            = (uint64_t) begin_range;
+  p.addr2           = (uint64_t) end_range;
+  p.condition_value = 0;
+
+3. PTRACE_DELHWDEBUG
+
+Takes an integer which identifies an existing breakpoint or watchpoint
+(i.e., the value returned from PTRACE_SETHWDEBUG), and deletes the
+corresponding breakpoint or watchpoint..