Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/scsi/fcoe/fcoe.c
	net/core/drop_monitor.c
	net/core/net-traces.c

7 files changed, 9 insertions, 9 deletions

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index d16b7a1..8d999d8 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1356,7 +1356,7 @@ platforms are moved over to use the flattened-device-tree model.
     - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
 			  for, used if phy-address is absent. bit 0x00000001 is
 			  MDIO address 0.
-			  For Axon it can be absent, thouugh my current driver
+			  For Axon it can be absent, though my current driver
 			  doesn't handle phy-address yet so for now, keep
 			  0x00ffffff in it.
     - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
@@ -1438,7 +1438,7 @@ platforms are moved over to use the flattened-device-tree model.
 
    The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
    in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
-   of standard device types (network, serial, etc.) and miscellanious
+   of standard device types (network, serial, etc.) and miscellaneous
    devices (gpio, LCD, spi, etc).  Also, since these devices are
    implemented within the fpga fabric every instance of the device can be
    synthesised with different options that change the behaviour.
diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt
index 6c974d2..e8b5bc2 100644
--- a/Documentation/powerpc/dts-bindings/fsl/board.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/board.txt
@@ -38,7 +38,7 @@ Required properities:
 - reg : Should contain the address and the length of the GPIO bank
   register.
 - #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional paramters (currently unused).
+  second cell is used to specify optional parameters (currently unused).
 - gpio-controller : Marks the port as GPIO controller.
 
 Example:
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
index 088fc47..160c752 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
@@ -19,7 +19,7 @@ Example:
 	reg = <119c0 30>;
      }
 
-* Properties common to mulitple CPM/QE devices
+* Properties common to multiple CPM/QE devices
 
 - fsl,cpm-command : This value is ORed with the opcode and command flag
                     to specify the device on which a CPM command operates.
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
index 1815dfe..349f79f 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
@@ -11,7 +11,7 @@ Required properties:
   "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
   "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
 - #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional paramters (currently unused).
+  second cell is used to specify optional parameters (currently unused).
 - gpio-controller : Marks the port as GPIO controller.
 
 Example of three SOC GPIO banks defined as gpio-controller nodes:
diff --git a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
index b26b919..bcc30ba 100644
--- a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
@@ -1,6 +1,6 @@
 * Freescale MSI interrupt controller
 
-Reguired properities:
+Required properties:
 - compatible : compatible list, contains 2 entries,
   first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
   etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
diff --git a/Documentation/powerpc/dts-bindings/fsl/pmc.txt b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
index 02f6f43..07256b7 100644
--- a/Documentation/powerpc/dts-bindings/fsl/pmc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
@@ -15,8 +15,8 @@ Properties:
   compatible; all statements below that apply to "fsl,mpc8548-pmc" also
   apply to "fsl,mpc8641d-pmc".
 
-  Compatibility does not include bit assigments in SCCR/PMCDR/DEVDISR; these
-  bit assigments are indicated via the sleep specifier in each device's
+  Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
+  bit assignments are indicated via the sleep specifier in each device's
   sleep property.
 
 - reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.txt
index 06da4d4..2031ddb 100644
--- a/Documentation/powerpc/qe_firmware.txt
+++ b/Documentation/powerpc/qe_firmware.txt
@@ -225,7 +225,7 @@ For example, to match the 8323, revision 1.0:
      soc.major = 1
      soc.minor = 0
 
-'padding' is neccessary for structure alignment.  This field ensures that the
+'padding' is necessary for structure alignment.  This field ensures that the
 'extended_modes' field is aligned on a 64-bit boundary.
 
 'extended_modes' is a bitfield that defines special functionality which has an