summaryrefslogtreecommitdiffstats
path: root/Documentation/powerpc
diff options
context:
space:
mode:
authorDavid Gibson <david@gibson.dropbear.id.au>2007-03-14 11:50:40 +1100
committerPaul Mackerras <paulus@samba.org>2007-03-16 16:38:19 +1100
commit0e0293c898c424c52e5d4e7f6923a203d06b9c4b (patch)
tree54078533f47d45c0840095901e416dfa543393ba /Documentation/powerpc
parenta782a9e3a12bcea4916117b0832016c24fffeb85 (diff)
downloadop-kernel-dev-0e0293c898c424c52e5d4e7f6923a203d06b9c4b.zip
op-kernel-dev-0e0293c898c424c52e5d4e7f6923a203d06b9c4b.tar.gz
[POWERPC] Update documentation for flat device tree format v17
This patch updates booting-without-of.txt to describe version 17 of the flattened device tree format. Version 17 is a small, backwards compatible change from version 16, adding an extra field giving the size of the device tree's structure block. At this time, the kernel has no use for the extra information, however its presence can make life easier for bootloaders or other software manipulating the tree. In addition this patch adds information on the size_dt_strings field of the device tree header, present since version 3 of the flattened tree format, but omitted from the documentation. It also makes changes to consistently refer to versions 16 and 17 as versions 16 and 17 in decimal, rather than version 0x10 which was occasionally used for version 16 previously. Finally, we also add the new field to the definition of the device tree header structure in prom.h Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'Documentation/powerpc')
-rw-r--r--Documentation/powerpc/booting-without-of.txt29
1 files changed, 23 insertions, 6 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 6d5a5a0..a1f83f1 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -265,6 +265,9 @@ struct boot_param_header {
booting on */
/* version 3 fields below */
u32 size_dt_strings; /* size of the strings block */
+
+ /* version 17 fields below */
+ u32 size_dt_struct; /* size of the DT structure block */
};
Along with the constants:
@@ -335,10 +338,13 @@ struct boot_param_header {
to reallocate it easily at boot and free up the unused flattened
structure after expansion. Version 16 introduces a new more
"compact" format for the tree itself that is however not backward
- compatible. You should always generate a structure of the highest
- version defined at the time of your implementation. Currently
- that is version 16, unless you explicitly aim at being backward
- compatible.
+ compatible. Version 17 adds an additional field, size_dt_struct,
+ allowing it to be reallocated or moved more easily (this is
+ particularly useful for bootloaders which need to make
+ adjustments to a device tree based on probed information). You
+ should always generate a structure of the highest version defined
+ at the time of your implementation. Currently that is version 17,
+ unless you explicitly aim at being backward compatible.
- last_comp_version
@@ -347,7 +353,7 @@ struct boot_param_header {
is backward compatible with version 1 (that is, a kernel build
for version 1 will be able to boot with a version 2 format). You
should put a 1 in this field if you generate a device tree of
- version 1 to 3, or 0x10 if you generate a tree of version 0x10
+ version 1 to 3, or 16 if you generate a tree of version 16 or 17
using the new unit name format.
- boot_cpuid_phys
@@ -360,6 +366,17 @@ struct boot_param_header {
point (see further chapters for more informations on the required
device-tree contents)
+ - size_dt_strings
+
+ This field only exists on version 3 and later headers. It
+ gives the size of the "strings" section of the device tree (which
+ starts at the offset given by off_dt_strings).
+
+ - size_dt_struct
+
+ This field only exists on version 17 and later headers. It gives
+ the size of the "structure" section of the device tree (which
+ starts at the offset given by off_dt_struct).
So the typical layout of a DT block (though the various parts don't
need to be in that order) looks like this (addresses go from top to
@@ -417,7 +434,7 @@ root node who has no parent.
A node has 2 names. The actual node name is generally contained in a
property of type "name" in the node property list whose value is a
zero terminated string and is mandatory for version 1 to 3 of the
-format definition (as it is in Open Firmware). Version 0x10 makes it
+format definition (as it is in Open Firmware). Version 16 makes it
optional as it can generate it from the unit name defined below.
There is also a "unit name" that is used to differentiate nodes with
OpenPOWER on IntegriCloud