summaryrefslogtreecommitdiffstats
path: root/Documentation/power
diff options
context:
space:
mode:
authorRafael J. Wysocki <rjw@sisk.pl>2007-05-08 00:24:07 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-05-08 11:14:59 -0700
commit5b7952021289b6d04d8c62c0f13acce570730dcd (patch)
tree57bb1363826b41bb2809a0a980f2bf78555bbf73 /Documentation/power
parent8e2c20023f34b652605a5fb7c68bb843d2b100a8 (diff)
downloadop-kernel-dev-5b7952021289b6d04d8c62c0f13acce570730dcd.zip
op-kernel-dev-5b7952021289b6d04d8c62c0f13acce570730dcd.tar.gz
Documentation: Ask driver writers to provide PM support
Add a paragraph in Documentation/SubmittingDrivers requesting that the basic PM support be provided by new device drivers. Add two new documents in Documentation/power/ giving general instructions on debugging the suspend/resume functionality and testing the suspend and resume support in device drivers. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: David Brownell <david-b@pacbell.net> Cc: Nigel Cunningham <ncunningham@linuxmail.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'Documentation/power')
-rw-r--r--Documentation/power/basic-pm-debugging.txt106
-rw-r--r--Documentation/power/drivers-testing.txt42
2 files changed, 148 insertions, 0 deletions
diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt
new file mode 100644
index 0000000..1a85e2b
--- /dev/null
+++ b/Documentation/power/basic-pm-debugging.txt
@@ -0,0 +1,106 @@
+Debugging suspend and resume
+ (C) 2007 Rafael J. Wysocki <rjw@sisk.pl>, GPL
+
+1. Testing suspend to disk (STD)
+
+To verify that the STD works, you can try to suspend in the "reboot" mode:
+
+# echo reboot > /sys/power/disk
+# echo disk > /sys/power/state
+
+and the system should suspend, reboot, resume and get back to the command prompt
+where you have started the transition. If that happens, the STD is most likely
+to work correctly, but you need to repeat the test at least a couple of times in
+a row for confidence. This is necessary, because some problems only show up on
+a second attempt at suspending and resuming the system. You should also test
+the "platform" and "shutdown" modes of suspend:
+
+# echo platform > /sys/power/disk
+# echo disk > /sys/power/state
+
+or
+
+# echo shutdown > /sys/power/disk
+# echo disk > /sys/power/state
+
+in which cases you will have to press the power button to make the system
+resume. If that does not work, you will need to identify what goes wrong.
+
+a) Test mode of STD
+
+To verify if there are any drivers that cause problems you can run the STD
+in the test mode:
+
+# echo test > /sys/power/disk
+# echo disk > /sys/power/state
+
+in which case the system should freeze tasks, suspend devices, disable nonboot
+CPUs (if any), wait for 5 seconds, enable nonboot CPUs, resume devices, thaw
+tasks and return to your command prompt. If that fails, most likely there is
+a driver that fails to either suspend or resume (in the latter case the system
+may hang or be unstable after the test, so please take that into consideration).
+To find this driver, you can carry out a binary search according to the rules:
+- if the test fails, unload a half of the drivers currently loaded and repeat
+(that would probably involve rebooting the system, so always note what drivers
+have been loaded before the test),
+- if the test succeeds, load a half of the drivers you have unloaded most
+recently and repeat.
+
+Once you have found the failing driver (there can be more than just one of
+them), you have to unload it every time before the STD transition. In that case
+please make sure to report the problem with the driver.
+
+It is also possible that a cycle can still fail after you have unloaded
+all modules. In that case, you would want to look in your kernel configuration
+for the drivers that can be compiled as modules (testing again with them as
+modules), and possibly also try boot time options such as "noapic" or "noacpi".
+
+b) Testing minimal configuration
+
+If the test mode of STD works, you can boot the system with "init=/bin/bash"
+and attempt to suspend in the "reboot", "shutdown" and "platform" modes. If
+that does not work, there probably is a problem with a driver statically
+compiled into the kernel and you can try to compile more drivers as modules,
+so that they can be tested individually. Otherwise, there is a problem with a
+modular driver and you can find it by loading a half of the modules you normally
+use and binary searching in accordance with the algorithm:
+- if there are n modules loaded and the attempt to suspend and resume fails,
+unload n/2 of the modules and try again (that would probably involve rebooting
+the system),
+- if there are n modules loaded and the attempt to suspend and resume succeeds,
+load n/2 modules more and try again.
+
+Again, if you find the offending module(s), it(they) must be unloaded every time
+before the STD transition, and please report the problem with it(them).
+
+c) Advanced debugging
+
+In case the STD does not work on your system even in the minimal configuration
+and compiling more drivers as modules is not practical or some modules cannot
+be unloaded, you can use one of the more advanced debugging techniques to find
+the problem. First, if there is a serial port in your box, you can set the
+CONFIG_DISABLE_CONSOLE_SUSPEND kernel configuration option and try to log kernel
+messages using the serial console. This may provide you with some information
+about the reasons of the suspend (resume) failure. Alternatively, it may be
+possible to use a FireWire port for debugging with firescope
+(ftp://ftp.firstfloor.org/pub/ak/firescope/). On i386 it is also possible to
+use the PM_TRACE mechanism documented in Documentation/s2ram.txt .
+
+2. Testing suspend to RAM (STR)
+
+To verify that the STR works, it is generally more convenient to use the s2ram
+tool available from http://suspend.sf.net and documented at
+http://en.opensuse.org/s2ram . However, before doing that it is recommended to
+carry out the procedure described in section 1.
+
+Assume you have resolved the problems with the STD and you have found some
+failing drivers. These drivers are also likely to fail during the STR or
+during the resume, so it is better to unload them every time before the STR
+transition. Now, you can follow the instructions at
+http://en.opensuse.org/s2ram to test the system, but if it does not work
+"out of the box", you may need to boot it with "init=/bin/bash" and test
+s2ram in the minimal configuration. In that case, you may be able to search
+for failing drivers by following the procedure analogous to the one described in
+1b). If you find some failing drivers, you will have to unload them every time
+before the STR transition (ie. before you run s2ram), and please report the
+problems with them.
diff --git a/Documentation/power/drivers-testing.txt b/Documentation/power/drivers-testing.txt
new file mode 100644
index 0000000..33016c2
--- /dev/null
+++ b/Documentation/power/drivers-testing.txt
@@ -0,0 +1,42 @@
+Testing suspend and resume support in device drivers
+ (C) 2007 Rafael J. Wysocki <rjw@sisk.pl>, GPL
+
+1. Preparing the test system
+
+Unfortunately, to effectively test the support for the system-wide suspend and
+resume transitions in a driver, it is necessary to suspend and resume a fully
+functional system with this driver loaded. Moreover, that should be done
+several times, preferably several times in a row, and separately for the suspend
+to disk (STD) and the suspend to RAM (STR) transitions, because each of these
+cases involves different ordering of operations and different interactions with
+the machine's BIOS.
+
+Of course, for this purpose the test system has to be known to suspend and
+resume without the driver being tested. Thus, if possible, you should first
+resolve all suspend/resume-related problems in the test system before you start
+testing the new driver. Please see Documents/power/basic-pm-debugging.txt for
+more information about the debugging of suspend/resume functionality.
+
+2. Testing the driver
+
+Once you have resolved the suspend/resume-related problems with your test system
+without the new driver, you are ready to test it:
+
+a) Build the driver as a module, load it and try the STD in the test mode (see:
+Documents/power/basic-pm-debugging.txt, 1a)).
+
+b) Load the driver and attempt to suspend to disk in the "reboot", "shutdown"
+and "platform" modes (see: Documents/power/basic-pm-debugging.txt, 1).
+
+c) Compile the driver directly into the kernel and try the STD in the test mode.
+
+d) Attempt to suspend to disk with the driver compiled directly into the kernel
+in the "reboot", "shutdown" and "platform" modes.
+
+e) Attempt to suspend to RAM using the s2ram tool with the driver loaded (see:
+Documents/power/basic-pm-debugging.txt, 2). As far as the STR tests are
+concerned, it should not matter whether or not the driver is built as a module.
+
+Each of the above tests should be repeated several times and the STD tests
+should be mixed with the STR tests. If any of them fails, the driver cannot be
+regarded as suspend/resume-safe.
OpenPOWER on IntegriCloud