Merge tag 'for-v3.6' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "The tag contains just a few battery-related changes for v3.6.  It's is
  all pretty straightforward, except one thing.

  One of our patches added thermal support for power supply class, but
  thermal/ subsystem changed under our feet.  We (well, Stephen, that
  is) caught the issue and it was decided[1] that I'd just delay the
  battery pull request, and then will fix it up by merging upstream back
  into battery tree at the specific commit.

  That's not all though: another[2] small fixup for thermal subsystem
  was needed to get rid of a warning in power supply subsystem (the
  warning was not drivers/power's "fault", the thermal registration
  function just needed a proper const annotation, which is also done by
  a small commit on top of the merge.

  So, to sum this up:
   - The 'master' branch of the battery tree was in the -next tree for
     weeks, was never rebased, altered etc.  It should be all OK;
   - Although, for-v3.6 tag contains the 'master' branch + merge + the
     warning fix.

  [1] http://lkml.org/lkml/2012/6/19/23
  [2] http://lkml.org/lkml/2012/6/18/28"

* tag 'for-v3.6' of git://git.infradead.org/battery-2.6: (23 commits)
  thermal: Constify 'type' argument for the registration routine
  olpc-battery: update CHARGE_FULL_DESIGN property for BYD LiFe batteries
  olpc-battery: Add VOLTAGE_MAX_DESIGN property
  charger-manager: Fix build break related to EXTCON
  lp8727_charger: Move header file into platform_data directory
  power_supply: Add min/max alert properties for CAPACITY, TEMP, TEMP_AMBIENT
  bq27x00_battery: Add support for BQ27425 chip
  charger-manager: Set current limit of regulator for over current protection
  charger-manager: Use EXTCON Subsystem to detect charger cables for charging
  test_power: Add VOLTAGE_NOW and BATTERY_TEMP properties
  test_power: Add support for USB AC source
  gpio-charger: Use cansleep version of gpio_set_value
  bq27x00_battery: Add support for power average and health properties
  sbs-battery: Don't trigger false supply_changed event
  twl4030_charger: Allow charger to control the regulator that feeds it
  twl4030_charger: Add backup-battery charging
  twl4030_charger: Fix some typos
  max17042_battery: Support CHARGE_COUNTER power supply attribute
  smb347-charger: Add constant charge and current properties
  power_supply: Add constant charge_current and charge_voltage properties
  ...

1 files changed, 10 insertions, 0 deletions

diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt
index 211831d..2f0ddc1 100644
--- a/Documentation/power/power_supply_class.txt
+++ b/Documentation/power/power_supply_class.txt
@@ -112,14 +112,24 @@ CHARGE_COUNTER - the current charge counter (in µAh).  This could easily
 be negative; there is no empty or full value.  It is only useful for
 relative, time-based measurements.
 
+CONSTANT_CHARGE_CURRENT - constant charge current programmed by charger.
+
+CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger.
+
 ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
 
 CAPACITY - capacity in percents.
+CAPACITY_ALERT_MIN - minimum capacity alert value in percents.
+CAPACITY_ALERT_MAX - maximum capacity alert value in percents.
 CAPACITY_LEVEL - capacity level. This corresponds to
 POWER_SUPPLY_CAPACITY_LEVEL_*.
 
 TEMP - temperature of the power supply.
+TEMP_ALERT_MIN - minimum battery temperature alert value in milli centigrade.
+TEMP_ALERT_MAX - maximum battery temperature alert value in milli centigrade.
 TEMP_AMBIENT - ambient temperature.
+TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert value in milli centigrade.
+TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert value in milli centigrade.
 
 TIME_TO_EMPTY - seconds left for battery to be considered empty (i.e.
 while battery powers a load)