Documentation: update broken web addresses.

Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

3 files changed, 8 insertions, 9 deletions

diff --git a/Documentation/power/apm-acpi.txt b/Documentation/power/apm-acpi.txt
index 1bd799d..6cc423d 100644
--- a/Documentation/power/apm-acpi.txt
+++ b/Documentation/power/apm-acpi.txt
@@ -28,5 +28,5 @@ and be sure that they are started sometime in the system boot process.
 Go ahead and start both.  If ACPI or APM is not available on your
 system the associated daemon will exit gracefully.
 
-  apmd:   http://worldvisions.ca/~apenwarr/apmd/
+  apmd:   http://ftp.debian.org/pool/main/a/apmd/
   acpid:  http://acpid.sf.net/
diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt
index 1555001..ddd78172 100644
--- a/Documentation/power/basic-pm-debugging.txt
+++ b/Documentation/power/basic-pm-debugging.txt
@@ -179,8 +179,7 @@ use the PM_TRACE mechanism documented in Documentation/s2ram.txt .
 
 To verify that the STR works, it is generally more convenient to use the s2ram
 tool available from http://suspend.sf.net and documented at
-http://en.opensuse.org/s2ram .  However, before doing that it is recommended to
-carry out STR testing using the facility described in section 1.
+http://en.opensuse.org/SDB:Suspend_to_RAM.
 
 Namely, after writing "freezer", "devices", "platform", "processors", or "core"
 into /sys/power/pm_test (available if the kernel is compiled with
diff --git a/Documentation/power/video.txt b/Documentation/power/video.txt
index 2b35849..3e6272b 100644
--- a/Documentation/power/video.txt
+++ b/Documentation/power/video.txt
@@ -67,11 +67,11 @@ There are a few types of systems where video works after S3 resume:
   POSTing bios works. Ole Rohne has patch to do just that at
   http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.
 
-(8) on some systems, you can use the video_post utility mentioned here:
-  http://bugzilla.kernel.org/show_bug.cgi?id=3670. Do echo 3 > /sys/power/state
-  && /usr/sbin/video_post - which will initialize the display in console mode.
-  If  you are in X, you can switch to a virtual terminal and back to X using
-  CTRL+ALT+F1 - CTRL+ALT+F7 to get the display working in graphical mode again.
+(8) on some systems, you can use the video_post utility and or 
+  do echo 3 > /sys/power/state  && /usr/sbin/video_post - which will 
+  initialize the display in console mode. If you are in X, you can switch
+  to a virtual terminal and back to X using  CTRL+ALT+F1 - CTRL+ALT+F7 to get
+  the display working in graphical mode again.
 
 Now, if you pass acpi_sleep=something, and it does not work with your
 bios, you'll get a hard crash during resume. Be careful. Also it is
@@ -177,7 +177,7 @@ Mainboard	    Graphics card                 hack (or "how to do it")
 Asus A7V8X	    nVidia RIVA TNT2 model 64	  s3_bios,s3_mode (4)
 
 
-(*) from http://www.ubuntulinux.org/wiki/HoaryPMResults, not sure
+(*) from https://wiki.ubuntu.com/HoaryPMResults, not sure
     which options to use. If you know, please tell me.
 
 (***) To be tested with a newer kernel.