Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "The main theme of this pull request is security covering variants 2
  and 3 for arm64. I expect to send additional patches next week
  covering an improved firmware interface (requires firmware changes)
  for variant 2 and way for KPTI to be disabled on unaffected CPUs
  (Cavium's ThunderX doesn't work properly with KPTI enabled because of
  a hardware erratum).

  Summary:

   - Security mitigations:
      - variant 2: invalidate the branch predictor with a call to
        secure firmware
      - variant 3: implement KPTI for arm64

   - 52-bit physical address support for arm64 (ARMv8.2)

   - arm64 support for RAS (firmware first only) and SDEI (software
     delegated exception interface; allows firmware to inject a RAS
     error into the OS)

   - perf support for the ARM DynamIQ Shared Unit PMU

   - CPUID and HWCAP bits updated for new floating point multiplication
     instructions in ARMv8.4

   - remove some virtual memory layout printks during boot

   - fix initial page table creation to cope with larger than 32M kernel
     images when 16K pages are enabled"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (104 commits)
  arm64: Fix TTBR + PAN + 52-bit PA logic in cpu_do_switch_mm
  arm64: Turn on KPTI only on CPUs that need it
  arm64: Branch predictor hardening for Cavium ThunderX2
  arm64: Run enable method for errata work arounds on late CPUs
  arm64: Move BP hardening to check_and_switch_context
  arm64: mm: ignore memory above supported physical address size
  arm64: kpti: Fix the interaction between ASID switching and software PAN
  KVM: arm64: Emulate RAS error registers and set HCR_EL2's TERR & TEA
  KVM: arm64: Handle RAS SErrors from EL2 on guest exit
  KVM: arm64: Handle RAS SErrors from EL1 on guest exit
  KVM: arm64: Save ESR_EL2 on guest SError
  KVM: arm64: Save/Restore guest DISR_EL1
  KVM: arm64: Set an impdef ESR for Virtual-SError using VSESR_EL2.
  KVM: arm/arm64: mask/unmask daif around VHE guests
  arm64: kernel: Prepare for a DISR user
  arm64: Unconditionally enable IESB on exception entry/return for firmware-first
  arm64: kernel: Survive corrected RAS errors notified by SError
  arm64: cpufeature: Detect CPU RAS Extentions
  arm64: sysreg: Move to use definitions for all the SCTLR bits
  arm64: cpufeature: __this_cpu_has_cap() shouldn't stop early
  ...

1 files changed, 28 insertions, 0 deletions

diff --git a/Documentation/perf/arm_dsu_pmu.txt b/Documentation/perf/arm_dsu_pmu.txt
new file mode 100644
index 0000000..d611e15
--- /dev/null
+++ b/Documentation/perf/arm_dsu_pmu.txt
@@ -0,0 +1,28 @@
+ARM DynamIQ Shared Unit (DSU) PMU
+==================================
+
+ARM DynamIQ Shared Unit integrates one or more cores with an L3 memory system,
+control logic and external interfaces to form a multicore cluster. The PMU
+allows counting the various events related to the L3 cache, Snoop Control Unit
+etc, using 32bit independent counters. It also provides a 64bit cycle counter.
+
+The PMU can only be accessed via CPU system registers and are common to the
+cores connected to the same DSU. Like most of the other uncore PMUs, DSU
+PMU doesn't support process specific events and cannot be used in sampling mode.
+
+The DSU provides a bitmap for a subset of implemented events via hardware
+registers. There is no way for the driver to determine if the other events
+are available or not. Hence the driver exposes only those events advertised
+by the DSU, in "events" directory under :
+
+  /sys/bus/event_sources/devices/arm_dsu_<N>/
+
+The user should refer to the TRM of the product to figure out the supported events
+and use the raw event code for the unlisted events.
+
+The driver also exposes the CPUs connected to the DSU instance in "associated_cpus".
+
+
+e.g usage :
+
+	perf stat -a -e arm_dsu_0/cycles/