caif-driver: Add CAIF-SPI Protocol driver.

This patch introduces the CAIF SPI Protocol Driver for
CAIF Link Layer.

This driver implements a platform driver to accommodate for a
platform specific SPI device. A general platform driver is not
possible as there are no SPI Slave side Kernel API defined.
A sample CAIF SPI Platform device can be found in
.../Documentation/networking/caif/spi_porting.txt

Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 208 insertions, 0 deletions

diff --git a/Documentation/networking/caif/spi_porting.txt b/Documentation/networking/caif/spi_porting.txt
new file mode 100644
index 0000000..61d7c92
--- /dev/null
+++ b/Documentation/networking/caif/spi_porting.txt
@@ -0,0 +1,208 @@
+- CAIF SPI porting -
+
+- CAIF SPI basics:
+
+Running CAIF over SPI needs some extra setup, owing to the nature of SPI.
+Two extra GPIOs have been added in order to negotiate the transfers
+ between the master and the slave. The minimum requirement for running
+CAIF over SPI is a SPI slave chip and two GPIOs (more details below).
+Please note that running as a slave implies that you need to keep up
+with the master clock. An overrun or underrun event is fatal.
+
+- CAIF SPI framework:
+
+To make porting as easy as possible, the CAIF SPI has been divided in
+two parts. The first part (called the interface part) deals with all
+generic functionality such as length framing, SPI frame negotiation
+and SPI frame delivery and transmission. The other part is the CAIF
+SPI slave device part, which is the module that you have to write if
+you want to run SPI CAIF on a new hardware. This part takes care of
+the physical hardware, both with regard to SPI and to GPIOs.
+
+- Implementing a CAIF SPI device:
+
+	- Functionality provided by the CAIF SPI slave device:
+
+	In order to implement a SPI device you will, as a minimum,
+	need to implement the following
+	functions:
+
+	int (*init_xfer) (struct cfspi_xfer * xfer, struct cfspi_dev *dev):
+
+	This function is called by the CAIF SPI interface to give
+	you a chance to set up your hardware to be ready to receive
+	a stream of data from the master. The xfer structure contains
+	both physical and logical adresses, as well as the total length
+	of the transfer in both directions.The dev parameter can be used
+	to map to different CAIF SPI slave devices.
+
+	void (*sig_xfer) (bool xfer, struct cfspi_dev *dev):
+
+	This function is called by the CAIF SPI interface when the output
+	(SPI_INT) GPIO needs to change state. The boolean value of the xfer
+	variable indicates whether the GPIO should be asserted (HIGH) or
+	deasserted (LOW). The dev parameter can be used to map to different CAIF
+	SPI slave devices.
+
+	- Functionality provided by the CAIF SPI interface:
+
+	void (*ss_cb) (bool assert, struct cfspi_ifc *ifc);
+
+	This function is called by the CAIF SPI slave device in order to
+	signal a change of state of the input GPIO (SS) to the interface.
+	Only active edges are mandatory to be reported.
+	This function can be called from IRQ context (recommended in order
+	not to introduce latency). The ifc parameter should be the pointer
+	returned from the platform probe function in the SPI device structure.
+
+	void (*xfer_done_cb) (struct cfspi_ifc *ifc);
+
+	This function is called by the CAIF SPI slave device in order to
+	report that a transfer is completed. This function should only be
+	called once both the transmission and the reception are completed.
+	This function can be called from IRQ context (recommended in order
+	not to introduce latency). The ifc parameter should be the pointer
+	returned from the platform probe function in the SPI device structure.
+
+	- Connecting the bits and pieces:
+
+		- Filling in the SPI slave device structure:
+
+		Connect the necessary callback functions.
+		Indicate clock speed (used to calculate toggle delays).
+		Chose a suitable name (helps debugging if you use several CAIF
+		SPI slave devices).
+		Assign your private data (can be used to map to your structure).
+
+		- Filling in the SPI slave platform device structure:
+		Add name of driver to connect to ("cfspi_sspi").
+		Assign the SPI slave device structure as platform data.
+
+- Padding:
+
+In order to optimize throughput, a number of SPI padding options are provided.
+Padding can be enabled independently for uplink and downlink transfers.
+Padding can be enabled for the head, the tail and for the total frame size.
+The padding needs to be correctly configured on both sides of the link.
+The padding can be changed via module parameters in cfspi_sspi.c or via
+the sysfs directory of the cfspi_sspi driver (before device registration).
+
+- CAIF SPI device template:
+
+/*
+ *	Copyright (C) ST-Ericsson AB 2010
+ *	Author: Daniel Martensson / Daniel.Martensson@stericsson.com
+ *	License terms: GNU General Public License (GPL), version 2.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <net/caif/caif_spi.h>
+
+MODULE_LICENSE("GPL");
+
+struct sspi_struct {
+	struct cfspi_dev sdev;
+	struct cfspi_xfer *xfer;
+};
+
+static struct sspi_struct slave;
+static struct platform_device slave_device;
+
+static irqreturn_t sspi_irq(int irq, void *arg)
+{
+	/* You only need to trigger on an edge to the active state of the
+	 * SS signal. Once a edge is detected, the ss_cb() function should be
+	 * called with the parameter assert set to true. It is OK
+	 * (and even advised) to call the ss_cb() function in IRQ context in
+	 * order not to add any delay. */
+
+	return IRQ_HANDLED;
+}
+
+static void sspi_complete(void *context)
+{
+	/* Normally the DMA or the SPI framework will call you back
+	 * in something similar to this. The only thing you need to
+	 * do is to call the xfer_done_cb() function, providing the pointer
+	 * to the CAIF SPI interface. It is OK to call this function
+	 * from IRQ context. */
+}
+
+static int sspi_init_xfer(struct cfspi_xfer *xfer, struct cfspi_dev *dev)
+{
+	/* Store transfer info. For a normal implementation you should
+	 * set up your DMA here and make sure that you are ready to
+	 * receive the data from the master SPI. */
+
+	struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
+
+	sspi->xfer = xfer;
+
+	return 0;
+}
+
+void sspi_sig_xfer(bool xfer, struct cfspi_dev *dev)
+{
+	/* If xfer is true then you should assert the SPI_INT to indicate to
+	 * the master that you are ready to recieve the data from the master
+	 * SPI. If xfer is false then you should de-assert SPI_INT to indicate
+	 * that the transfer is done.
+	 */
+
+	struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
+}
+
+static void sspi_release(struct device *dev)
+{
+	/*
+	 * Here you should release your SPI device resources.
+	 */
+}
+
+static int __init sspi_init(void)
+{
+	/* Here you should initialize your SPI device by providing the
+	 * necessary functions, clock speed, name and private data. Once
+	 * done, you can register your device with the
+	 * platform_device_register() function. This function will return
+	 * with the CAIF SPI interface initialized. This is probably also
+	 * the place where you should set up your GPIOs, interrupts and SPI
+	 * resources. */
+
+	int res = 0;
+
+	/* Initialize slave device. */
+	slave.sdev.init_xfer = sspi_init_xfer;
+	slave.sdev.sig_xfer = sspi_sig_xfer;
+	slave.sdev.clk_mhz = 13;
+	slave.sdev.priv = &slave;
+	slave.sdev.name = "spi_sspi";
+	slave_device.dev.release = sspi_release;
+
+	/* Initialize platform device. */
+	slave_device.name = "cfspi_sspi";
+	slave_device.dev.platform_data = &slave.sdev;
+
+	/* Register platform device. */
+	res = platform_device_register(&slave_device);
+	if (res) {
+		printk(KERN_WARNING "sspi_init: failed to register dev.\n");
+		return -ENODEV;
+	}
+
+	return res;
+}
+
+static void __exit sspi_exit(void)
+{
+	platform_device_del(&slave_device);
+}
+
+module_init(sspi_init);
+module_exit(sspi_exit);