Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 214 insertions, 0 deletions

diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
new file mode 100644
index 0000000..cc4b4d0
--- /dev/null
+++ b/Documentation/networking/pktgen.txt
@@ -0,0 +1,214 @@
+
+
+                  HOWTO for the linux packet generator 
+                  ------------------------------------
+
+Date: 041221
+
+Enable CONFIG_NET_PKTGEN to compile and build pktgen.o either in kernel
+or as module. Module is preferred. insmod pktgen if needed. Once running
+pktgen creates a thread on each CPU where each thread has affinty it's CPU.
+Monitoring and controlling is done via /proc. Easiest to select a suitable 
+a sample script and configure.
+
+On a dual CPU:
+
+ps aux | grep pkt
+root       129  0.3  0.0     0    0 ?        SW    2003 523:20 [pktgen/0]
+root       130  0.3  0.0     0    0 ?        SW    2003 509:50 [pktgen/1]
+
+
+For montoring and control pktgen creates:
+	/proc/net/pktgen/pgctrl
+	/proc/net/pktgen/kpktgend_X
+        /proc/net/pktgen/ethX
+
+
+Viewing threads
+===============
+/proc/net/pktgen/kpktgend_0 
+Name: kpktgend_0  max_before_softirq: 10000
+Running: 
+Stopped: eth1 
+Result: OK: max_before_softirq=10000
+
+Most important the devices assigend to thread. Note! A device can only belong 
+to one thread.
+
+
+Viewing devices
+===============
+
+Parm section holds configured info. Current hold running stats. 
+Result is printed after run or after interruption. Example:
+
+/proc/net/pktgen/eth1       
+
+Params: count 10000000  min_pkt_size: 60  max_pkt_size: 60
+     frags: 0  delay: 0  clone_skb: 1000000  ifname: eth1
+     flows: 0 flowlen: 0
+     dst_min: 10.10.11.2  dst_max: 
+     src_min:   src_max: 
+     src_mac: 00:00:00:00:00:00  dst_mac: 00:04:23:AC:FD:82
+     udp_src_min: 9  udp_src_max: 9  udp_dst_min: 9  udp_dst_max: 9
+     src_mac_count: 0  dst_mac_count: 0 
+     Flags: 
+Current:
+     pkts-sofar: 10000000  errors: 39664
+     started: 1103053986245187us  stopped: 1103053999346329us idle: 880401us
+     seq_num: 10000011  cur_dst_mac_offset: 0  cur_src_mac_offset: 0
+     cur_saddr: 0x10a0a0a  cur_daddr: 0x20b0a0a
+     cur_udp_dst: 9  cur_udp_src: 9
+     flows: 0
+Result: OK: 13101142(c12220741+d880401) usec, 10000000 (60byte,0frags)
+  763292pps 390Mb/sec (390805504bps) errors: 39664
+
+Confguring threads and devices
+==============================
+This is done via the /proc interface easiest done via pgset in the scripts
+
+Examples:
+
+ pgset "clone_skb 1"     sets the number of copies of the same packet
+ pgset "clone_skb 0"     use single SKB for all transmits
+ pgset "pkt_size 9014"   sets packet size to 9014
+ pgset "frags 5"         packet will consist of 5 fragments
+ pgset "count 200000"    sets number of packets to send, set to zero
+                         for continious sends untill explicitl stopped.
+
+ pgset "delay 5000"      adds delay to hard_start_xmit(). nanoseconds
+
+ pgset "dst 10.0.0.1"    sets IP destination address
+                         (BEWARE! This generator is very aggressive!)
+
+ pgset "dst_min 10.0.0.1"            Same as dst
+ pgset "dst_max 10.0.0.254"          Set the maximum destination IP.
+ pgset "src_min 10.0.0.1"            Set the minimum (or only) source IP.
+ pgset "src_max 10.0.0.254"          Set the maximum source IP.
+ pgset "dst6 fec0::1"     IPV6 destination address
+ pgset "src6 fec0::2"     IPV6 source address
+ pgset "dstmac 00:00:00:00:00:00"    sets MAC destination address
+ pgset "srcmac 00:00:00:00:00:00"    sets MAC source address
+
+ pgset "src_mac_count 1" Sets the number of MACs we'll range through.  
+                         The 'minimum' MAC is what you set with srcmac.
+
+ pgset "dst_mac_count 1" Sets the number of MACs we'll range through.
+                         The 'minimum' MAC is what you set with dstmac.
+
+ pgset "flag [name]"     Set a flag to determine behaviour.  Current flags
+                         are: IPSRC_RND #IP Source is random (between min/max),
+                              IPDST_RND, UDPSRC_RND,
+                              UDPDST_RND, MACSRC_RND, MACDST_RND 
+
+ pgset "udp_src_min 9"   set UDP source port min, If < udp_src_max, then
+                         cycle through the port range.
+
+ pgset "udp_src_max 9"   set UDP source port max.
+ pgset "udp_dst_min 9"   set UDP destination port min, If < udp_dst_max, then
+                         cycle through the port range.
+ pgset "udp_dst_max 9"   set UDP destination port max.
+
+ pgset stop    	          aborts injection. Also, ^C aborts generator.
+
+
+Example scripts
+===============
+
+A collection of small tutorial scripts for pktgen is in expamples dir.
+
+pktgen.conf-1-1                  # 1 CPU 1 dev 
+pktgen.conf-1-2                  # 1 CPU 2 dev
+pktgen.conf-2-1                  # 2 CPU's 1 dev 
+pktgen.conf-2-2                  # 2 CPU's 2 dev
+pktgen.conf-1-1-rdos             # 1 CPU 1 dev w. route DoS 
+pktgen.conf-1-1-ip6              # 1 CPU 1 dev ipv6
+pktgen.conf-1-1-ip6-rdos         # 1 CPU 1 dev ipv6  w. route DoS
+pktgen.conf-1-1-flows            # 1 CPU 1 dev multiple flows.
+
+Run in shell: ./pktgen.conf-X-Y It does all the setup including sending. 
+
+
+Interrupt affinity
+===================
+Note when adding devices to a specific CPU there good idea to also assign 
+/proc/irq/XX/smp_affinity so the TX-interrupts gets bound to the same CPU.
+as this reduces cache bouncing when freeing skb's.
+
+
+Current commands and configuration options
+==========================================
+
+** Pgcontrol commands:
+
+start
+stop
+
+** Thread commands:
+
+add_device
+rem_device_all
+max_before_softirq
+
+
+** Device commands:
+
+count
+clone_skb
+debug
+
+frags
+delay
+
+src_mac_count
+dst_mac_count
+
+pkt_size 
+min_pkt_size
+max_pkt_size
+
+udp_src_min
+udp_src_max
+
+udp_dst_min
+udp_dst_max
+
+flag
+  IPSRC_RND
+  TXSIZE_RND
+  IPDST_RND
+  UDPSRC_RND
+  UDPDST_RND
+  MACSRC_RND
+  MACDST_RND
+
+dst_min
+dst_max
+
+src_min
+src_max
+
+dst_mac
+src_mac
+
+clear_counters
+
+dst6
+src6
+
+flows
+flowlen
+
+References:
+ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/
+ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/examples/
+
+Paper from Linux-Kongress in Erlangen 2004.
+ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/pktgen_paper.pdf
+
+Thanks to:
+Grant Grundler for testing on IA-64 and parisc, Harald Welte,  Lennert Buytenhek
+Stephen Hemminger, Andi Kleen, Dave Miller and many others.
+
+
+Good luck with the linux net-development.
\ No newline at end of file