Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 324 insertions, 0 deletions

diff --git a/Documentation/networking/net-modules.txt b/Documentation/networking/net-modules.txt
new file mode 100644
index 0000000..3830a83
--- /dev/null
+++ b/Documentation/networking/net-modules.txt
@@ -0,0 +1,324 @@
+Wed 2-Aug-95  <matti.aarnio@utu.fi>
+
+		Linux network driver modules
+
+	Do not mistake this for "README.modules" at the top-level
+	directory!  That document tells about modules in general, while
+	this one tells only about network device driver modules.
+
+	This is a potpourri of INSMOD-time(*) configuration options
+	(if such exists) and their default values of various modules
+	in the Linux network drivers collection.
+
+	Some modules have also hidden (= non-documented) tunable values.
+	The choice of not documenting them is based on general belief, that
+	the less the user needs to know, the better.  (There are things that
+	driver developers can use, others should not confuse themselves.)
+
+	In many cases it is highly preferred that insmod:ing is done
+	ONLY with defining an explicit address for the card, AND BY
+	NOT USING AUTO-PROBING!
+
+	Now most cards have some explicitly defined base address that they
+	are compiled with (to avoid auto-probing, among other things).
+	If that compiled value does not match your actual configuration,
+	do use the "io=0xXXX" -parameter for the insmod, and give there
+	a value matching your environment.
+
+	If you are adventurous, you can ask the driver to autoprobe
+	by using the "io=0" parameter, however it is a potentially dangerous
+	thing to do in a live system.  (If you don't know where the
+	card is located, you can try autoprobing, and after possible
+	crash recovery, insmod with proper IO-address..)
+
+	--------------------------
+	(*)	"INSMOD-time" means when you load module with
+		/sbin/insmod  you can feed it optional parameters.
+		See "man insmod".
+	--------------------------
+
+
+	8390 based Network Modules		(Paul Gortmaker, Nov 12, 1995)
+	--------------------------
+
+(Includes: smc-ultra, ne, wd, 3c503, hp, hp-plus, e2100 and ac3200)
+
+The 8390 series of network drivers now support multiple card systems without 
+reloading the same module multiple times (memory efficient!) This is done by 
+specifying multiple comma separated values, such as:
+
+	insmod 3c503.o io=0x280,0x300,0x330,0x350  xcvr=0,1,0,1
+
+The above would have the one module controlling four 3c503 cards, with card 2
+and 4 using external transceivers. The "insmod" manual describes the usage
+of comma separated value lists.
+
+It is *STRONGLY RECOMMENDED* that you supply "io=" instead of autoprobing.
+If an "io=" argument is not supplied, then the ISA drivers will complain
+about autoprobing being not recommended, and begrudgingly autoprobe for
+a *SINGLE CARD ONLY* -- if you want to use multiple cards you *have* to 
+supply an "io=0xNNN,0xQQQ,..." argument.
+
+The ne module is an exception to the above. A NE2000 is essentially an
+8390 chip, some bus glue and some RAM. Because of this, the ne probe is
+more invasive than the rest, and so at boot we make sure the ne probe is 
+done last of all the 8390 cards (so that it won't trip over other 8390 based
+cards) With modules we can't ensure that all other non-ne 8390 cards have
+already been found. Because of this, the ne module REQUIRES an "io=0xNNN" 
+argument passed in via insmod. It will refuse to autoprobe.
+
+It is also worth noting that auto-IRQ probably isn't as reliable during 
+the flurry of interrupt activity on a running machine. Cards such as the 
+ne2000 that can't get the IRQ setting from an EEPROM or configuration
+register are probably best supplied with an "irq=M" argument as well.
+
+
+----------------------------------------------------------------------
+Card/Module List - Configurable Parameters and Default Values
+----------------------------------------------------------------------
+
+3c501.c:
+	io  = 0x280	IO base address
+	irq = 5		IRQ
+	(Probes ports:	0x280, 0x300)
+
+3c503.c:
+	io = 0		(It will complain if you don't supply an "io=0xNNN")
+	irq = 0		(IRQ software selected by driver using autoIRQ)
+	xcvr = 0	(Use xcvr=1 to select external transceiver.)
+	(Probes ports: 0x300, 0x310, 0x330, 0x350, 0x250, 0x280, 0x2A0, 0x2E0)
+
+3c505.c:
+	io = 0
+	irq = 0
+	dma = 6         (not autoprobed)
+	(Probes ports: 0x300, 0x280, 0x310)
+
+3c507.c:
+	io = 0x300
+	irq = 0
+	(Probes ports: 0x300, 0x320, 0x340, 0x280)
+
+3c509.c:
+	io = 0
+	irq = 0
+	( Module load-time probing Works reliably only on EISA, ISA ID-PROBE
+	  IS NOT RELIABLE!  Compile this driver statically into kernel for
+	  now, if you need it auto-probing on an ISA-bus machine. )
+
+8390.c:
+	(No public options, several other modules need this one)
+
+a2065.c:
+	Since this is a Zorro board, it supports full autoprobing, even for
+	multiple boards. (m68k/Amiga)
+
+ac3200.c:
+	io = 0		(Checks 0x1000 to 0x8fff in 0x1000 intervals)
+	irq = 0		(Read from config register)
+	(EISA probing..)
+
+apricot.c:
+	io = 0x300  (Can't be altered!)
+	irq = 10
+
+arcnet.c:
+	io = 0
+	irqnum = 0
+	shmem = 0
+	num = 0
+	DO SET THESE MANUALLY AT INSMOD!
+	(When probing, looks at the following possible addresses:
+	 Suggested ones:
+		0x300, 0x2E0, 0x2F0, 0x2D0
+	 Other ones:
+		0x200, 0x210, 0x220, 0x230, 0x240, 0x250, 0x260, 0x270,
+		0x280, 0x290, 0x2A0, 0x2B0, 0x2C0,
+		       0x310, 0x320, 0x330, 0x340, 0x350, 0x360, 0x370,
+		0x380, 0x390, 0x3A0,			  0x3E0, 0x3F0  )
+
+ariadne.c:
+	Since this is a Zorro board, it supports full autoprobing, even for
+	multiple boards. (m68k/Amiga)
+
+at1700.c:
+	io = 0x260
+	irq = 0
+	(Probes ports: 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300)
+
+atari_bionet.c:
+	Supports full autoprobing. (m68k/Atari)
+
+atari_pamsnet.c:
+	Supports full autoprobing. (m68k/Atari)
+
+atarilance.c:
+	Supports full autoprobing. (m68k/Atari)
+
+atp.c: *Not modularized*
+	(Probes ports: 0x378, 0x278, 0x3BC;
+	 fixed IRQs: 5 and 7			)
+
+cops.c:
+	io = 0x240
+	irq = 5
+	nodeid = 0	(AutoSelect = 0, NodeID 1-254 is hand selected.)
+	(Probes ports: 0x240, 0x340, 0x200, 0x210, 0x220, 0x230, 0x260,
+		       0x2A0, 0x300, 0x310, 0x320, 0x330, 0x350, 0x360)	
+
+de4x5.c:
+	io = 0x000b
+	irq = 10
+	is_not_dec = 0  -- For non-DEC card using DEC 21040/21041/21140 chip, set this to 1
+	(EISA, and PCI probing)
+
+de600.c:
+	de600_debug = 0
+	(On port 0x378, irq 7 -- lpt1;  compile time configurable)
+
+de620.c:
+	bnc = 0, utp = 0  <-- Force media by setting either.
+	io = 0x378	(also compile-time configurable)
+	irq = 7
+
+depca.c:
+	io = 0x200
+	irq = 7
+	(Probes ports:	ISA:  0x300, 0x200;
+			EISA: 0x0c00		)
+
+dummy.c:
+	No options
+
+e2100.c:
+	io = 0		(It will complain if you don't supply an "io=0xNNN")
+	irq = 0		(IRQ software selected by driver)
+	mem = 0		(Override default shared memory start of 0xd0000)
+	xcvr = 0	(Use xcvr=1 to select external transceiver.)
+	(Probes ports: 0x300, 0x280, 0x380, 0x220)
+
+eepro.c:
+	io = 0x200
+	irq = 0
+	(Probes ports: 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0x360)
+
+eexpress.c:
+	io = 0x300
+	irq = 0		(IRQ value read from EEPROM)
+	(Probes ports: 0x300, 0x270, 0x320, 0x340)
+
+eql.c:
+	(No parameters)
+
+ewrk3.c:
+	io = 0x300
+	irq = 5
+	(With module no autoprobing!
+	 On EISA-bus does EISA probing.
+	 Static linkage probes ports on ISA bus:
+		0x100, 0x120, 0x140, 0x160, 0x180, 0x1A0, 0x1C0,
+		0x200, 0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x2E0,
+		0x300,        0x340, 0x360, 0x380, 0x3A0, 0x3C0)
+
+hp-plus.c:
+	io = 0		(It will complain if you don't supply an "io=0xNNN")
+	irq = 0		(IRQ read from configuration register)
+	(Probes ports: 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340)
+
+hp.c:
+	io = 0		(It will complain if you don't supply an "io=0xNNN")
+	irq = 0		(IRQ software selected by driver using autoIRQ)
+	(Probes ports: 0x300, 0x320, 0x340, 0x280, 0x2C0, 0x200, 0x240)
+
+hp100.c:
+	hp100_port = 0 (IO-base address)
+	(Does EISA-probing, if on EISA-slot;
+	 On ISA-bus probes all ports from 0x100 thru to 0x3E0
+	 in increments of 0x020)
+
+hydra.c:
+	Since this is a Zorro board, it supports full autoprobing, even for
+	multiple boards. (m68k/Amiga)
+
+ibmtr.c:
+	io = 0xa20, 0xa24 (autoprobed by default)
+	irq = 0 (driver cannot select irq - read from hardware)
+	mem = 0 (shared memory base set at 0xd0000 and not yet 
+	         able to override thru mem= parameter.)
+
+lance.c: *Not modularized*
+	(PCI, and ISA probing; "CONFIG_PCI" needed for PCI support)
+	(Probes ISA ports: 0x300, 0x320, 0x340, 0x360)
+
+loopback.c: *Static kernel component*
+
+ne.c:
+	io = 0		(Explicitly *requires* an "io=0xNNN" value)
+	irq = 0		(Tries to determine configured IRQ via autoIRQ)
+	(Probes ports: 0x300, 0x280, 0x320, 0x340, 0x360)
+
+net_init.c: *Static kernel component*
+
+ni52.c: *Not modularized*
+	(Probes ports:	0x300, 0x280, 0x360, 0x320, 0x340
+		mems:	0xD0000, 0xD2000, 0xC8000, 0xCA000,
+			0xD4000, 0xD6000, 0xD8000 )
+
+ni65.c: *Not modularized*  **16MB MEMORY BARRIER BUG**
+	(Probes ports:	0x300, 0x320, 0x340, 0x360)
+
+pi2.c:	*Not modularized* (well, NON-STANDARD modularization!)
+	Only one card supported at this time.
+	(Probes ports: 0x380, 0x300, 0x320, 0x340, 0x360, 0x3A0)
+
+plip.c:
+	io = 0
+	irq = 0		(by default, uses IRQ 5 for port at 0x3bc, IRQ 7
+			for port at 0x378, and IRQ 2 for port at 0x278)
+	(Probes ports: 0x278, 0x378, 0x3bc)
+
+ppp.c:
+	No options (ppp-2.2+ has some, this is based on non-dynamic
+	version from ppp-2.1.2d)
+
+seeq8005.c: *Not modularized*
+	(Probes ports: 0x300, 0x320, 0x340, 0x360)
+
+sk_g16.c: *Not modularized*
+	(Probes ports: 0x100, 0x180, 0x208, 0x220m 0x288, 0x320, 0x328, 0x390)
+
+skeleton.c: *Skeleton*
+
+slhc.c:
+	No configuration parameters
+
+slip.c:
+	slip_maxdev = 256 (default value from SL_NRUNIT on slip.h)
+
+
+smc-ultra.c:
+	io = 0		(It will complain if you don't supply an "io=0xNNN")
+	irq = 0		(IRQ val. read from EEPROM)
+	(Probes ports:	0x200, 0x220, 0x240, 0x280, 0x300, 0x340, 0x380)
+
+tulip.c: *Partial modularization*
+	(init-time memory allocation makes problems..)
+
+tunnel.c:
+	No insmod parameters
+
+wavelan.c:
+	io = 0x390	(Settable, but change not recommended)
+	irq = 0		(Not honoured, if changed..)
+
+wd.c:
+	io = 0		(It will complain if you don't supply an "io=0xNNN")
+	irq = 0		(IRQ val. read from EEPROM, ancient cards use autoIRQ)
+	mem = 0		(Force shared-memory on address 0xC8000, or whatever..)
+	mem_end = 0	(Force non-std. mem. size via supplying mem_end val.)
+			(eg. for 32k WD8003EBT, use mem=0xd0000 mem_end=0xd8000)
+	(Probes ports:	0x300, 0x280, 0x380, 0x240)
+
+znet.c: *Not modularized*
+	(Only one device on  Zenith Z-Note (notebook?) systems,
+	 configuration information from (EE)PROM)