Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Add VF IPSEC offload support in ixgbe, from Shannon Nelson.

 2) Add zero-copy AF_XDP support to i40e, from Björn Töpel.

 3) All in-tree drivers are converted to {g,s}et_link_ksettings() so we
    can get rid of the {g,s}et_settings ethtool callbacks, from Michal
    Kubecek.

 4) Add software timestamping to veth driver, from Michael Walle.

 5) More work to make packet classifiers and actions lockless, from Vlad
    Buslov.

 6) Support sticky FDB entries in bridge, from Nikolay Aleksandrov.

 7) Add ipv6 version of IP_MULTICAST_ALL sockopt, from Andre Naujoks.

 8) Support batching of XDP buffers in vhost_net, from Jason Wang.

 9) Add flow dissector BPF hook, from Petar Penkov.

10) i40e vf --> generic iavf conversion, from Jesse Brandeburg.

11) Add NLA_REJECT netlink attribute policy type, to signal when users
    provide attributes in situations which don't make sense. From
    Johannes Berg.

12) Switch TCP and fair-queue scheduler over to earliest departure time
    model. From Eric Dumazet.

13) Improve guest receive performance by doing rx busy polling in tx
    path of vhost networking driver, from Tonghao Zhang.

14) Add per-cgroup local storage to bpf

15) Add reference tracking to BPF, from Joe Stringer. The verifier can
    now make sure that references taken to objects are properly released
    by the program.

16) Support in-place encryption in TLS, from Vakul Garg.

17) Add new taprio packet scheduler, from Vinicius Costa Gomes.

18) Lots of selftests additions, too numerous to mention one by one here
    but all of which are very much appreciated.

19) Support offloading of eBPF programs containing BPF to BPF calls in
    nfp driver, frm Quentin Monnet.

20) Move dpaa2_ptp driver out of staging, from Yangbo Lu.

21) Lots of u32 classifier cleanups and simplifications, from Al Viro.

22) Add new strict versions of netlink message parsers, and enable them
    for some situations. From David Ahern.

23) Evict neighbour entries on carrier down, also from David Ahern.

24) Support BPF sk_msg verdict programs with kTLS, from Daniel Borkmann
    and John Fastabend.

25) Add support for filtering route dumps, from David Ahern.

26) New igc Intel driver for 2.5G parts, from Sasha Neftin et al.

27) Allow vxlan enslavement to bridges in mlxsw driver, from Ido
    Schimmel.

28) Add queue and stack map types to eBPF, from Mauricio Vasquez B.

29) Add back byte-queue-limit support to r8169, with all the bug fixes
    in other areas of the driver it works now! From Florian Westphal and
    Heiner Kallweit.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2147 commits)
  tcp: add tcp_reset_xmit_timer() helper
  qed: Fix static checker warning
  Revert "be2net: remove desc field from be_eq_obj"
  Revert "net: simplify sock_poll_wait"
  net: socionext: Reset tx queue in ndo_stop
  net: socionext: Add dummy PHY register read in phy_write()
  net: socionext: Stop PHY before resetting netsec
  net: stmmac: Set OWN bit for jumbo frames
  arm64: dts: stratix10: Support Ethernet Jumbo frame
  tls: Add maintainers
  net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode
  octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes
  octeontx2-af: Support for setting MAC address
  octeontx2-af: Support for changing RSS algorithm
  octeontx2-af: NIX Rx flowkey configuration for RSS
  octeontx2-af: Install ucast and bcast pkt forwarding rules
  octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response
  octeontx2-af: NPC MCAM and LDATA extract minimal configuration
  octeontx2-af: Enable packet length and csum validation
  octeontx2-af: Support for VTAG strip and capture
  ...

1 files changed, 141 insertions, 0 deletions

diff --git a/Documentation/networking/fm10k.rst b/Documentation/networking/fm10k.rst
new file mode 100644
index 0000000..bf5e594
--- /dev/null
+++ b/Documentation/networking/fm10k.rst
@@ -0,0 +1,141 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Linux* Base Driver for Intel(R) Ethernet Multi-host Controller
+==============================================================
+
+August 20, 2018
+Copyright(c) 2015-2018 Intel Corporation.
+
+Contents
+========
+- Identifying Your Adapter
+- Additional Configurations
+- Performance Tuning
+- Known Issues
+- Support
+
+Identifying Your Adapter
+========================
+The driver in this release is compatible with devices based on the Intel(R)
+Ethernet Multi-host Controller.
+
+For information on how to identify your adapter, and for the latest Intel
+network drivers, refer to the Intel Support website:
+http://www.intel.com/support
+
+
+Flow Control
+------------
+The Intel(R) Ethernet Switch Host Interface Driver does not support Flow
+Control. It will not send pause frames. This may result in dropped frames.
+
+
+Virtual Functions (VFs)
+-----------------------
+Use sysfs to enable VFs.
+Valid Range: 0-64
+
+For example::
+
+    echo $num_vf_enabled > /sys/class/net/$dev/device/sriov_numvfs //enable VFs
+    echo 0 > /sys/class/net/$dev/device/sriov_numvfs //disable VFs
+
+NOTE: Neither the device nor the driver control how VFs are mapped into config
+space. Bus layout will vary by operating system. On operating systems that
+support it, you can check sysfs to find the mapping.
+
+NOTE: When SR-IOV mode is enabled, hardware VLAN filtering and VLAN tag
+stripping/insertion will remain enabled. Please remove the old VLAN filter
+before the new VLAN filter is added. For example::
+
+    ip link set eth0 vf 0 vlan 100	// set vlan 100 for VF 0
+    ip link set eth0 vf 0 vlan 0	// Delete vlan 100
+    ip link set eth0 vf 0 vlan 200	// set a new vlan 200 for VF 0
+
+
+Additional Features and Configurations
+======================================
+
+Jumbo Frames
+------------
+Jumbo Frames support is enabled by changing the Maximum Transmission Unit (MTU)
+to a value larger than the default value of 1500.
+
+Use the ifconfig command to increase the MTU size. For example, enter the
+following where <x> is the interface number::
+
+    ifconfig eth<x> mtu 9000 up
+
+Alternatively, you can use the ip command as follows::
+
+    ip link set mtu 9000 dev eth<x>
+    ip link set up dev eth<x>
+
+This setting is not saved across reboots. The setting change can be made
+permanent by adding 'MTU=9000' to the file:
+
+- For RHEL: /etc/sysconfig/network-scripts/ifcfg-eth<x>
+- For SLES: /etc/sysconfig/network/<config_file>
+
+NOTE: The maximum MTU setting for Jumbo Frames is 15342. This value coincides
+with the maximum Jumbo Frames size of 15364 bytes.
+
+NOTE: This driver will attempt to use multiple page sized buffers to receive
+each jumbo packet. This should help to avoid buffer starvation issues when
+allocating receive packets.
+
+
+Generic Receive Offload, aka GRO
+--------------------------------
+The driver supports the in-kernel software implementation of GRO. GRO has
+shown that by coalescing Rx traffic into larger chunks of data, CPU
+utilization can be significantly reduced when under large Rx load. GRO is an
+evolution of the previously-used LRO interface. GRO is able to coalesce
+other protocols besides TCP. It's also safe to use with configurations that
+are problematic for LRO, namely bridging and iSCSI.
+
+
+
+Supported ethtool Commands and Options for Filtering
+----------------------------------------------------
+-n --show-nfc
+  Retrieves the receive network flow classification configurations.
+
+rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6
+  Retrieves the hash options for the specified network traffic type.
+
+-N --config-nfc
+  Configures the receive network flow classification.
+
+rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 m|v|t|s|d|f|n|r
+  Configures the hash options for the specified network traffic type.
+
+- udp4: UDP over IPv4
+- udp6: UDP over IPv6
+- f Hash on bytes 0 and 1 of the Layer 4 header of the rx packet.
+- n Hash on bytes 2 and 3 of the Layer 4 header of the rx packet.
+
+
+Known Issues/Troubleshooting
+============================
+
+Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS under Linux KVM
+---------------------------------------------------------------------------------------
+KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM. This
+includes traditional PCIe devices, as well as SR-IOV-capable devices based on
+the Intel Ethernet Controller XL710.
+
+
+Support
+=======
+For general information, go to the Intel support website at:
+
+https://www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+https://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.