summaryrefslogtreecommitdiffstats
path: root/Documentation/mono.txt
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/mono.txt
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/mono.txt')
-rw-r--r--Documentation/mono.txt66
1 files changed, 66 insertions, 0 deletions
diff --git a/Documentation/mono.txt b/Documentation/mono.txt
new file mode 100644
index 0000000..6739ab9
--- /dev/null
+++ b/Documentation/mono.txt
@@ -0,0 +1,66 @@
+ Mono(tm) Binary Kernel Support for Linux
+ -----------------------------------------
+
+To configure Linux to automatically execute Mono-based .NET binaries
+(in the form of .exe files) without the need to use the mono CLR
+wrapper, you can use the BINFMT_MISC kernel support.
+
+This will allow you to execute Mono-based .NET binaries just like any
+other program after you have done the following:
+
+1) You MUST FIRST install the Mono CLR support, either by downloading
+ a binary package, a source tarball or by installing from CVS. Binary
+ packages for several distributions can be found at:
+
+ http://go-mono.com/download.html
+
+ Instructions for compiling Mono can be found at:
+
+ http://www.go-mono.com/compiling.html
+
+ Once the Mono CLR support has been installed, just check that
+ /usr/bin/mono (which could be located elsewhere, for example
+ /usr/local/bin/mono) is working.
+
+2) You have to compile BINFMT_MISC either as a module or into
+ the kernel (CONFIG_BINFMT_MISC) and set it up properly.
+ If you choose to compile it as a module, you will have
+ to insert it manually with modprobe/insmod, as kmod
+ can not be easily supported with binfmt_misc.
+ Read the file 'binfmt_misc.txt' in this directory to know
+ more about the configuration process.
+
+3) Add the following enries to /etc/rc.local or similar script
+ to be run at system startup:
+
+# Insert BINFMT_MISC module into the kernel
+if [ ! -e /proc/sys/fs/binfmt_misc/register ]; then
+ /sbin/modprobe binfmt_misc
+ # Some distributions, like Fedora Core, perform
+ # the following command automatically when the
+ # binfmt_misc module is loaded into the kernel.
+ # Thus, it is possible that the following line
+ # is not needed at all. Look at /etc/modprobe.conf
+ # to check whether this is applicable or not.
+ mount -t binfmt_misc none /proc/sys/fs/binfmt_misc
+fi
+
+# Register support for .NET CLR binaries
+if [ -e /proc/sys/fs/binfmt_misc/register ]; then
+ # Replace /usr/bin/mono with the correct pathname to
+ # the Mono CLR runtime (usually /usr/local/bin/mono
+ # when compiling from sources or CVS).
+ echo ':CLR:M::MZ::/usr/bin/mono:' > /proc/sys/fs/binfmt_misc/register
+else
+ echo "No binfmt_misc support"
+ exit 1
+fi
+
+4) Check that .exe binaries can be ran without the need of a
+ wrapper script, simply by launching the .exe file directly
+ from a command prompt, for example:
+
+ /usr/bin/xsd.exe
+
+ NOTE: If this fails with a permission denied error, check
+ that the .exe file has execute permissions.
OpenPOWER on IntegriCloud