summaryrefslogtreecommitdiffstats
path: root/Documentation/leds
diff options
context:
space:
mode:
authorMilo Kim <milo.kim@ti.com>2013-11-20 22:14:34 -0800
committerBryan Wu <cooloney@gmail.com>2014-01-27 17:28:48 -0800
commit93ad8a1d59a35ef7b489a83552daee6506f47815 (patch)
tree06a2f03a7b613da719200780ff03e1c027ce5a90 /Documentation/leds
parent28c9266b38a00a07497daad0237f7fa154652ece (diff)
downloadop-kernel-dev-93ad8a1d59a35ef7b489a83552daee6506f47815.zip
op-kernel-dev-93ad8a1d59a35ef7b489a83552daee6506f47815.tar.gz
leds: lp5523: Support LED MUX configuration on running a pattern
There are two ways to run a pattern in LP5523. One is using legacy sysfs files such as 'enginex_mode','enginex_load' and 'enginex_leds'. ('x' is from 1 to 3). Among them, 'enginex_leds' are used for selecting specific LED channel MUX. (MUX means which LEDs are used for running a pattern from LED 1 to 9.) The other way is using the firmware interface. In this mode, the default LED MUX strings are used. In other words, LED MUX is not configurable on the fly. This patch enables dynamic LED MUX configuration when the firmware is loaded. By accessing the sysfs file 'enginex_leds', the LED channels can be configured. To synchronize the operation mode, each engine mode should be set to 'LOAD'. The documentation is updated as well. Cc: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
Diffstat (limited to 'Documentation/leds')
-rw-r--r--Documentation/leds/leds-lp55xx.txt10
1 files changed, 9 insertions, 1 deletions
diff --git a/Documentation/leds/leds-lp55xx.txt b/Documentation/leds/leds-lp55xx.txt
index 82713ff..bcea12a 100644
--- a/Documentation/leds/leds-lp55xx.txt
+++ b/Documentation/leds/leds-lp55xx.txt
@@ -73,6 +73,10 @@ select_engine : Select which engine is used for running program
run_engine : Start program which is loaded via the firmware interface
firmware : Load program data
+In case of LP5523, one more command is required, 'enginex_leds'.
+It is used for selecting LED output(s) at each engine number.
+In more details, please refer to 'leds-lp5523.txt'.
+
For example, run blinking pattern in engine #1 of LP5521
echo 1 > /sys/bus/i2c/devices/xxxx/select_engine
echo 1 > /sys/class/firmware/lp5521/loading
@@ -81,10 +85,12 @@ echo 0 > /sys/class/firmware/lp5521/loading
echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
For example, run blinking pattern in engine #3 of LP55231
+Two LEDs are configured as pattern output channels.
echo 3 > /sys/bus/i2c/devices/xxxx/select_engine
echo 1 > /sys/class/firmware/lp55231/loading
echo "9d0740ff7e0040007e00a0010000" > /sys/class/firmware/lp55231/data
echo 0 > /sys/class/firmware/lp55231/loading
+echo "000001100" > /sys/bus/i2c/devices/xxxx/engine3_leds
echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
To start blinking patterns in engine #2 and #3 simultaneously,
@@ -99,17 +105,19 @@ done
echo 1 > /sys/class/leds/red/device/run_engine
Here is another example for LP5523.
+Full LED strings are selected by 'engine2_leds'.
echo 2 > /sys/bus/i2c/devices/xxxx/select_engine
echo 1 > /sys/class/firmware/lp5523/loading
echo "9d80400004ff05ff437f0000" > /sys/class/firmware/lp5523/data
echo 0 > /sys/class/firmware/lp5523/loading
+echo "111111111" > /sys/bus/i2c/devices/xxxx/engine2_leds
echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
As soon as 'loading' is set to 0, registered callback is called.
Inside the callback, the selected engine is loaded and memory is updated.
To run programmed pattern, 'run_engine' attribute should be enabled.
-The pattern sqeuence of LP8501 is same as LP5523.
+The pattern sqeuence of LP8501 is similar to LP5523.
However pattern data is specific.
Ex 1) Engine 1 is used
echo 1 > /sys/bus/i2c/devices/xxxx/select_engine
OpenPOWER on IntegriCloud