Merge branch 'x86/asm' into x86/apic, to resolve a conflict

Conflicts:
	arch/x86/kernel/apic/io_apic.c
	arch/x86/kernel/apic/vector.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 19 insertions, 4 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 274252f..61ab162 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -165,7 +165,7 @@ multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
 bytes respectively. Such letter suffixes can also be entirely omitted.
 
 
-	acpi=		[HW,ACPI,X86]
+	acpi=		[HW,ACPI,X86,ARM64]
 			Advanced Configuration and Power Interface
 			Format: { force | off | strict | noirq | rsdt }
 			force -- enable ACPI if default was off
@@ -175,6 +175,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				strictly ACPI specification compliant.
 			rsdt -- prefer RSDT over (default) XSDT
 			copy_dsdt -- copy DSDT to memory
+			For ARM64, ONLY "acpi=off" or "acpi=force" are available
 
 			See also Documentation/power/runtime_pm.txt, pci=noacpi
 
@@ -713,10 +714,18 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
+		uart[8250],mmio32,<addr>[,options]
+		uart[8250],0x<addr>[,options]
 			Start an early, polled-mode console on the 8250/16550
 			UART at the specified I/O port or MMIO address,
-			switching to the matching ttyS device later.  The
-			options are the same as for ttyS, above.
+			switching to the matching ttyS device later.
+			MMIO inter-register address stride is either 8-bit
+			(mmio) or 32-bit (mmio32).
+			If none of [io|mmio|mmio32], <addr> is assumed to be
+			equivalent to 'mmio'. 'options' are specified in the
+			same format described for ttyS above; if unspecified,
+			the h/w is not re-initialized.
+
 		hvc<n>	Use the hypervisor console device <n>. This is for
 			both Xen and PowerPC hypervisors.
 
@@ -950,11 +959,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
 		uart[8250],mmio32,<addr>[,options]
+		uart[8250],0x<addr>[,options]
 			Start an early, polled-mode console on the 8250/16550
 			UART at the specified I/O port or MMIO address.
 			MMIO inter-register address stride is either 8-bit
 			(mmio) or 32-bit (mmio32).
-			The options are the same as for ttyS, above.
+			If none of [io|mmio|mmio32], <addr> is assumed to be
+			equivalent to 'mmio'. 'options' are specified in the
+			same format described for "console=ttyS<n>"; if
+			unspecified, the h/w is not initialized.
 
 		pl011,<addr>
 			Start an early, polled-mode console on a pl011 serial
@@ -3774,6 +3787,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 					READ_CAPACITY_16 command);
 				f = NO_REPORT_OPCODES (don't use report opcodes
 					command, uas only);
+				g = MAX_SECTORS_240 (don't transfer more than
+					240 sectors at a time, uas only);
 				h = CAPACITY_HEURISTICS (decrease the
 					reported device capacity by one
 					sector if the number is odd);