Merge branch 'x86-bsp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 BSP hotplug changes from Ingo Molnar:
 "This tree enables CPU#0 (the boot processor) to be onlined/offlined on
  x86, just like any other CPU.  Enabled on Intel CPUs for now.

  Allowing this required the identification and fixing of latent CPU#0
  assumptions (such as CPU#0 initializations, etc.) in the x86
  architecture code, plus the identification of barriers to
  BSP-offlining, such as active PIC interrupts which can only be
  serviced on the BSP.

  It's behind a default-off option, and there's a debug option that
  allows the automatic testing of this feature.

  The motivation of this feature is to allow and prepare for true
  CPU-hotplug hardware support: recent changes to MCE support enable us
  to detect a deteriorating but not yet hard-failing L1/L2 cache on a
  CPU that could be soft-unplugged - or a failing L3 cache on a
  multi-socket system.

  Note that true hardware hot-plug is not yet fully enabled by this,
  because that requires a special platform wakeup sequence to be sent to
  the freshly powered up CPU#0.  Future patches for this are planned,
  once such a platform exists.  Chicken and egg"

* 'x86-bsp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, topology: Debug CPU0 hotplug
  x86/i387.c: Initialize thread xstate only on CPU0 only once
  x86, hotplug: Handle retrigger irq by the first available CPU
  x86, hotplug: The first online processor saves the MTRR state
  x86, hotplug: During CPU0 online, enable x2apic, set_numa_node.
  x86, hotplug: Wake up CPU0 via NMI instead of INIT, SIPI, SIPI
  x86-32, hotplug: Add start_cpu0() entry point to head_32.S
  x86-64, hotplug: Add start_cpu0() entry point to head_64.S
  kernel/cpu.c: Add comment for priority in cpu_hotplug_pm_callback
  x86, hotplug, suspend: Online CPU0 for suspend or hibernate
  x86, hotplug: Support functions for CPU0 online/offline
  x86, topology: Don't offline CPU0 if any PIC irq can not be migrated out of it
  x86, Kconfig: Add config switch for CPU0 hotplug
  doc: Add x86 CPU0 online/offline feature

1 files changed, 14 insertions, 0 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 03d1251..5190f17 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1984,6 +1984,20 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.
 
+	cpu0_hotplug	[X86] Turn on CPU0 hotplug feature when
+			CONFIG_BOOTPARAM_HOTPLUG_CPU0 is off.
+			Some features depend on CPU0. Known dependencies are:
+			1. Resume from suspend/hibernate depends on CPU0.
+			Suspend/hibernate will fail if CPU0 is offline and you
+			need to online CPU0 before suspend/hibernate.
+			2. PIC interrupts also depend on CPU0. CPU0 can't be
+			removed if a PIC interrupt is detected.
+			It's said poweroff/reboot may depend on CPU0 on some
+			machines although I haven't seen such issues so far
+			after CPU0 is offline on a few tested machines.
+			If the dependencies are under your control, you can
+			turn on cpu0_hotplug.
+
 	nptcg=		[IA-64] Override max number of concurrent global TLB
 			purges which is reported from either PAL_VM_SUMMARY or
 			SAL PALO.