summaryrefslogtreecommitdiffstats
path: root/Documentation/kernel-parameters.txt
diff options
context:
space:
mode:
authorViresh Kumar <viresh.kumar@linaro.org>2013-04-08 16:45:40 +0530
committerTejun Heo <tj@kernel.org>2013-05-14 10:50:06 -0700
commitcee22a15052faa817e3ec8985a28154d3fabc7aa (patch)
tree506028de7bd3bf7de08a7933b5601355f27c5262 /Documentation/kernel-parameters.txt
parentf722406faae2d073cc1d01063d1123c35425939e (diff)
downloadop-kernel-dev-cee22a15052faa817e3ec8985a28154d3fabc7aa.zip
op-kernel-dev-cee22a15052faa817e3ec8985a28154d3fabc7aa.tar.gz
workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues
Workqueues can be performance or power-oriented. Currently, most workqueues are bound to the CPU they were created on. This gives good performance (due to cache effects) at the cost of potentially waking up otherwise idle cores (Idle from scheduler's perspective. Which may or may not be physically idle) just to process some work. To save power, we can allow the work to be rescheduled on a core that is already awake. Workqueues created with the WQ_UNBOUND flag will allow some power savings. However, we don't change the default behaviour of the system. To enable power-saving behaviour, a new config option CONFIG_WQ_POWER_EFFICIENT needs to be turned on. This option can also be overridden by the workqueue.power_efficient boot parameter. tj: Updated config description and comments. Renamed CONFIG_WQ_POWER_EFFICIENT to CONFIG_WQ_POWER_EFFICIENT_DEFAULT. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'Documentation/kernel-parameters.txt')
-rw-r--r--Documentation/kernel-parameters.txt15
1 files changed, 15 insertions, 0 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c3bfacb..37dfd72 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3320,6 +3320,21 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
that this also can be controlled per-workqueue for
workqueues visible under /sys/bus/workqueue/.
+ workqueue.power_efficient
+ Per-cpu workqueues are generally preferred because
+ they show better performance thanks to cache
+ locality; unfortunately, per-cpu workqueues tend to
+ be more power hungry than unbound workqueues.
+
+ Enabling this makes the per-cpu workqueues which
+ were observed to contribute significantly to power
+ consumption unbound, leading to measurably lower
+ power usage at the cost of small performance
+ overhead.
+
+ The default value of this parameter is determined by
+ the config option CONFIG_WQ_POWER_EFFICIENT_DEFAULT.
+
x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of
default x2apic cluster mode on platforms
supporting x2apic.
OpenPOWER on IntegriCloud