i2c: Split I2C_M_NOSTART support out of I2C_FUNC_PROTOCOL_MANGLING

Since there are uses for I2C_M_NOSTART which are much more sensible and
standard than most of the protocol mangling functionality (the main one
being gather writes to devices where something like a register address
needs to be inserted before a block of data) create a new I2C_FUNC_NOSTART
for this feature and update all the users to use it.

Also strengthen the disrecommendation of the protocol mangling while we're
at it.

In the case of regmap-i2c we remove the requirement for mangling as
I2C_M_NOSTART is the only mangling feature which is being used.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

2 files changed, 14 insertions, 4 deletions

diff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality
index 42c17c1..b0ff2ab 100644
--- a/Documentation/i2c/functionality
+++ b/Documentation/i2c/functionality
@@ -18,9 +18,9 @@ For the most up-to-date list of functionality constants, please check
                                   adapters typically can not do these)
   I2C_FUNC_10BIT_ADDR             Handles the 10-bit address extensions
   I2C_FUNC_PROTOCOL_MANGLING      Knows about the I2C_M_IGNORE_NAK,
-                                  I2C_M_REV_DIR_ADDR, I2C_M_NOSTART and
-                                  I2C_M_NO_RD_ACK flags (which modify the
-                                  I2C protocol!)
+                                  I2C_M_REV_DIR_ADDR and I2C_M_NO_RD_ACK
+                                  flags (which modify the I2C protocol!)
+  I2C_FUNC_NOSTART                Can skip repeated start sequence
   I2C_FUNC_SMBUS_QUICK            Handles the SMBus write_quick command
   I2C_FUNC_SMBUS_READ_BYTE        Handles the SMBus read_byte command
   I2C_FUNC_SMBUS_WRITE_BYTE       Handles the SMBus write_byte command
@@ -50,6 +50,9 @@ A few combinations of the above flags are also defined for your convenience:
                                   emulated by a real I2C adapter (using
                                   the transparent emulation layer)
 
+In kernel versions prior to 3.5 I2C_FUNC_NOSTART was implemented as
+part of I2C_FUNC_PROTOCOL_MANGLING.
+
 
 ADAPTER IMPLEMENTATION
 ----------------------
diff --git a/Documentation/i2c/i2c-protocol b/Documentation/i2c/i2c-protocol
index 10518dd..0b3e62d 100644
--- a/Documentation/i2c/i2c-protocol
+++ b/Documentation/i2c/i2c-protocol
@@ -49,7 +49,9 @@ a byte read, followed by a byte write:
 Modified transactions
 =====================
 
-We have found some I2C devices that needs the following modifications:
+The following modifications to the I2C protocol can also be generated,
+with the exception of I2C_M_NOSTART these are usually only needed to
+work around device issues:
 
   Flag I2C_M_NOSTART: 
     In a combined transaction, no 'S Addr Wr/Rd [A]' is generated at some
@@ -60,6 +62,11 @@ We have found some I2C devices that needs the following modifications:
     we do not generate Addr, but we do generate the startbit S. This will
     probably confuse all other clients on your bus, so don't try this.
 
+    This is often used to gather transmits from multiple data buffers in
+    system memory into something that appears as a single transfer to the
+    I2C device but may also be used between direction changes by some
+    rare devices.
+
   Flags I2C_M_REV_DIR_ADDR
     This toggles the Rd/Wr flag. That is, if you want to do a write, but
     need to emit an Rd instead of a Wr, or vice versa, you set this